rabbitmq Cookbook

This is a cookbook for managing RabbitMQ with Chef. It is intended for RabbitMQ 2.6.1 or later releases. With Chef we have adopted support >= 11.14.0 for chef-client, and leaning heavily on chef-client 12 and above.

NOTE: This cookbook is still maintained by @jjasghar, please ping him on PRs or Issues you may find.

Requirements

This cookbook depends on the erlang cookbook.

The release was tested with (rabbitmq.com/distro version), from the kitchen.yml.

• CentOS 7.0
• Ubuntu 14.04
• Ubuntu 16.04
• Debian 8.0

We are starting to test with Ubuntu 16.04, though we have not fully vetted support yet. Use at your own risk, if you do find something please report here.

Recipes

default

Installs rabbitmq-server from RabbitMQ.com via direct download of the installation package or using the distribution version. Depending on your distribution, the provided version may be quite old so they are disabled by default. If you want to use the distro version, set the attribute ['rabbitmq']['use_distro_version'] to true. You may override the download URL attribute ['rabbitmq']['package'] if you wish to use a local mirror.

The cluster recipe is now combined with the default and will now auto-cluster. Set the ['rabbitmq']['clustering']['enable'] attribute to true, ['rabbitmq']['clustering']['cluster_disk_nodes'] array of node@host strings that describe which you want to be disk nodes and then set an alphanumeric string for the erlang_cookie.

To enable SSL turn ssl to true and set the paths to your cacert, cert and key files.

node['rabbitmq']['ssl'] = true
node['rabbitmq']['ssl_cacert'] = '/path/to/cacert.pem'
node['rabbitmq']['ssl_cert'] = '/path/to/cert.pem'
node['rabbitmq']['ssl_key'] = '/path/to/key.pem'

A full list of SSL attributes can be found in attributes/default.rb.

Attributes

Default values and usage information of important attributes are shown below. More attributes are documented in metadata.rb.

Username and Password

The default username and password are guest/guest:

['rabbitmq']['default_user'] = 'guest'

['rabbitmq']['default_pass'] = 'guest'

Loopback Users

By default, the guest user can only connect via localhost. This is the behavior of RabbitMQ when the loopback_users configuration is not specified in it's configuration file. Also, by default, this cookbook does not specify loopback_users in the configuration file:

['rabbitmq']['loopback_users'] = nil

If you wish to allow the default guest user to connect remotely, you can change this to []. If instead you wanted to allow just the user 'foo' to connect over loopback, you would set this value to ["foo"]. More information can be found here: https://www.rabbitmq.com/access-control.html.

mgmt_console

Installs the rabbitmq_management and rabbitmq_management_visualiser plugins. To use https connection to management console, turn ['rabbitmq']['web_console_ssl'] to true. The SSL port for web management console can be configured by setting attribute ['rabbitmq']['web_console_ssl_port'], whose default value is 15671.

plugin_management

Enables any plugins listed in the node['rabbitmq']['enabled_plugins'] and disables any listed in node['rabbitmq']['disabled_plugins'] attributes.

community_plugins

Downloads, installs and enables pre-built community plugins binaries.

To specify a plugin, set the attribute node['rabbitmq']['community_plugins']['PLUGIN_NAME'] to 'DOWNLOAD_URL'. For example, to use the RabbitMQ priority queue plugin, set the attribute node['rabbitmq']['community_plugins']['rabbitmq_priority_queue'] to 'https://www.rabbitmq.com/community-plugins/v3.4.x/rabbitmq_priority_queue-3.4.x-3431dc1e.ez'.

policy_management

Enables any policies listed in the node['rabbitmq']['policies'] and disables any listed in node['rabbitmq']['disabled_policies'] attributes.

See examples in attributes file.

user_management

Enables any users listed in the node['rabbitmq']['enabled_users'] and disables any listed in node['rabbitmq']['disabled_users'] attributes. You can provide user credentials, the vhosts that they need to have access to and the permissions that should be allocated to each user.

node['rabbitmq']['enabled_users'] = [
    {
        :name => 'kitten',
        :password => 'kitten',
        :tag => 'leader',
        :rights => [
            {
                :vhost => 'nova',
                :conf => '.*',
                :write => '.*',
                :read => '.*'
            }
        ]
    }
]

virtualhost_management

Enables any vhosts listed in the node['rabbitmq']['virtualhosts'] and disables any listed in node['rabbitmq']['disabled_virtualhosts'] attributes.

cluster

Configure the cluster between the nodes in the node['rabbitmq']['clustering']['cluster_nodes'] attribute. It also, supports the auto or manual clustering.

• Auto clustering : Use auto-configuration of RabbitMQ, http://www.rabbitmq.com/clustering.html#auto-config
• Manual clustering : Configure the cluster by executing rabbitmqctl join_cluster command.

Attributes that related to clustering

• node['rabbitmq']['clustering']['enable'] : Default decision flag of clustering
• node['rabbitmq']['erlang_cookie'] : Same erlang cookie is required for the cluster
• node['rabbitmq']['clustering']['use_auto_clustering'] : Default is false. (manual clustering is default)
• node['rabbitmq']['clustering']['cluster_name'] : Name of cluster. default value is nil. In case of nil or '' is set for cluster_name, first node name in node['rabbitmq']['clustering']['cluster_nodes'] attribute will be set for manual clustering. for the auto clustering, one of the node name will be set.
• node['rabbitmq']['clustering']['cluster_nodes'] : List of cluster nodes. it required node name and cluster node type. please refer to example in below.

Attributes example

node['rabbitmq']['clustering']['enable'] = true
node['rabbitmq']['erlang_cookie'] = 'AnyAlphaNumericStringWillDo'
node['rabbitmq']['clustering']['cluster_partition_handling'] = 'ignore'
node['rabbitmq']['clustering']['use_auto_clustering'] = false
node['rabbitmq']['clustering']['cluster_name'] = 'seoul_tokyo_newyork'
node['rabbitmq']['clustering']['cluster_nodes'] = [
    {
        :name => 'rabbit@rabbit1',
        :type => 'disc'
    },
    {
        :name => 'rabbit@rabbit2',
        :type => 'ram'
    },
    {
        :name => 'rabbit@rabbit3',
        :type => 'disc'
    }
]

Resources/Providers

There are 5 LWRPs for interacting with RabbitMQ.

plugin

Enables or disables a rabbitmq plugin. Plugins are not supported for releases prior to 2.7.0.

• :enable enables a plugin
• :disable disables a plugin

Examples

rabbitmq_plugin "rabbitmq_stomp" do
  action :enable
end

rabbitmq_plugin "rabbitmq_shovel" do
  action :disable
end

policy

sets or clears a rabbitmq policy.

• :set sets a policy
• :clear clears a policy
• :list lists policys

Examples

rabbitmq_policy "ha-all" do
  pattern "^(?!amq\\.).*"
  params ({"ha-mode"=>"all"})
  priority 1
  action :set
end

rabbitmq_policy "ha-all" do
  action :clear
end

user

Adds and deletes users, fairly simplistic permissions management.

• :add adds a user with a password
• :delete deletes a user
• :set_permissions sets the permissions for a user, vhost is optional
• :clear_permissions clears the permissions for a user
• :set_tags set the tags on a user
• :clear_tags clear any tags on a user
• :change_password set the password for a user

Examples

rabbitmq_user "guest" do
  action :delete
end

rabbitmq_user "nova" do
  password "sekret"
  action :add
end

rabbitmq_user "nova" do
  vhost "/nova"
  permissions ".* .* .*"
  action :set_permissions
end

rabbitmq_user "rmq" do
  vhost ["/", "/rmq", "/nova"]
  permissions ".* .* .*"
  action :set_permissions
end

rabbitmq_user "joe" do
  tag "admin,lead"
  action :set_tags
end

vhost

Adds and deletes vhosts.

• :add adds a vhost
• :delete deletes a vhost

Examples

rabbitmq_vhost "/nova" do
  action :add
end

cluster

Join cluster, set cluster name and change cluster node type.

• :join join in cluster as a manual clustering. node will join in first node of json string data.

• cluster nodes data json format : Data should have all the cluster nodes information.

[
    {
        "name" : "rabbit@rabbit1",
        "type" : "disc"
    },
    {
        "name" : "rabbit@rabbit2",
        "type" : "ram"
    },
    {
        "name" "rabbit@rabbit3",
        "type" : "disc"
    }
]

• :set_cluster_name set the cluster name.
• :change_cluster_node_type change cluster type of node. disc or ram should be set.

Examples

rabbitmq_cluster '[{"name":"rabbit@rabbit1","type":"disc"},{"name":"rabbit@rabbit2","type":"ram"},{"name":"rabbit@rabbit3","type":"disc"}]' do
  action :join
end

rabbitmq_cluster '[{"name":"rabbit@rabbit1","type":"disc"},{"name":"rabbit@rabbit2","type":"ram"},{"name":"rabbit@rabbit3","type":"disc"}]' do
  cluster_name 'seoul_tokyo_newyork'
  action :set_cluster_name
end

rabbitmq_cluster '[{"name":"rabbit@rabbit1","type":"disc"},{"name":"rabbit@rabbit2","type":"ram"},{"name":"rabbit@rabbit3","type":"disc"}]' do
  action :change_cluster_node_type
end

Limitations

For an already running cluster, these actions still require manual intervention:

• changing the :erlang_cookie
• turning :cluster from true to false

License & Authors

• Author:: Benjamin Black (b@b3k.us)
• Author:: Daniel DeLeo (dan@kallistec.com)
• Author:: Matt Ray (matt@chef.io)
• Author:: Seth Thomas (cheeseplus@chef.io)
• Author:: JJ Asghar (jj@chef.io)

Copyright (c) 2009-2015, Chef Software, Inc.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.