GeoPySpark is a Python bindings library for GeoTrellis, a Scala library for working with geospatial data in a distributed environment. By using PySpark, GeoPySpark is able to provide na interface into the GeoTrellis framework.
Here is a quick example of GeoPySpark. In the following code, we take NLCD data of the state of Pennsylvania from 2011, and do a masking operation on it with a Polygon that represents an area of interest. This masked layer is then saved.
If you wish to follow along with this example, you will need to download the NLCD data and unzip it.. Running these two commands will complete these tasks for you:
curl -o /tmp/NLCD2011_LC_Pennsylvania.zip "https://s3-us-west-2.amazonaws.com/prd-tnm/StagedProducts/NLCD/data/2011/landcover/states/NLCD2011_LC_Pennsylvania.zip?ORIG=513_SBDDG"
unzip -d /tmp /tmp/NLCD2011_LC_Pennsylvania.zipimport geopyspark as gps
from pyspark import SparkContext
from shapely.geometry import box
# Create the SparkContext
conf = gps.geopyspark_conf(appName="geopyspark-example", master="local[*]")
sc = SparkContext(conf=conf)
# Read in the NLCD tif that has been saved locally.
# This tif represents the state of Pennsylvania.
raster_layer = gps.geotiff.get(layer_type=gps.LayerType.SPATIAL,
uri='/tmp/NLCD2011_LC_Pennsylvania.tif',
num_partitions=100)
# Tile the rasters within the layer and reproject them to Web Mercator.
tiled_layer = raster_layer.tile_to_layout(layout=gps.GlobalLayout(), target_crs=3857)
# Creates a Polygon that covers roughly the north-west section of Philadelphia.
# This is the region that will be masked.
area_of_interest = box(-75.229225, 40.003686, -75.107345, 40.084375)
# Mask the tiles within the layer with the area of interest
masked = tiled_layer.mask(geometries=area_of_interest)
# We will now pyramid the masked TiledRasterLayer so that we can use it in a TMS server later.
pyramided_mask = masked.pyramid()
# Save each layer of the pyramid locally so that it can be accessed at a later time.
for pyramid in pyramided_mask.levels.values():
gps.write(uri='file:///tmp/pa-nlcd-2011',
layer_name='north-west-philly',
tiled_raster_layer=pyramid)If you need help, have questions, or like to talk to the developers (let us know what you're working on!) you contact us at:
As you may have noticed from the above links, those are links to the GeoTrellis gitter channel and mailing list. This is because this project is currently an offshoot of GeoTrellis, and we will be using their mailing list and gitter channel as a means of contact. However, we will form our own if there is a need for it.
| Requirement | Version |
|---|---|
| Java | >=1.8 |
| Scala | >=2.11 |
| Python | 3.3 - 3.6 |
| Spark | >=2.1.1 |
Java 8 and Scala 2.11 are needed for GeoPySpark to work; as they are required by
GeoTrellis. In addition, Spark needs to be installed and configured with the
environment variable, SPARK_HOME set.
You can test to see if Spark is installed properly by running the following in the terminal:
> echo $SPARK_HOME
/usr/local/bin/sparkIf the return is a path leading to your Spark folder, then it means that Spark has been configured correctly.
Before installing, check the above table to make sure that the requirements are met.
To install via pip open the terminal and run the following:
pip install geopyspark
geopyspark install-jar -p [path/to/install/jar]Where the first command installs the python code from PyPi and the second downloads the backend, jar file. If no path is given when downloading the jar, then it will be downloaded to wherever GeoPySpark was installed at.
"What's with that weird pip install?", you may be asking yourself. The reason
for its unusualness is due to how GeoPySpark functions. Because this library
is a python binding for a Scala project, we need to be able to access the
Scala backend. To do this, we plug into PySpark which acts as a bridge between
Python and Scala. However, in order to achieve this the Scala code needs to be
assembled into a jar file. This poses a problem due to its size (117.7 MB at
v0.1.0-RC!). To get around the size constraints of PyPi, we thus utilized this
method of distribution where the jar must be downloaded in a separate command
when using pip install.
- Note:
- Installing from source or for development does not require the separate download of the jar.
If you would rather install from source, clone the GeoPySpark repo and enter it.
git clone https://github.com/locationtech-labs/geopyspark.git
cd geopysparkmake installThis will assemble the backend-end jar that contains the Scala code,
move it to the jars sub-package, and then runs the setup.py script.
- Note:
- If you have altered the global behavior of
sbtthis install may not work the way it was intended.
make build
pip install -e .make build will assemble the back-end jar and move it the jars
sub-package. The second command will install GeoPySpark in "editable" mode.
Meaning any changes to the source files will also appear in your system
installation.
A third option is to install GeoPySpark in a virtual environment. To get things started, enter the environment and run the following:
git clone https://github.com/locationtech-labs/geopyspark.git
cd geopyspark
export PYTHONPATH=$VIRTUAL_ENV/lib/<your python version>/site-packagesReplace <your python version with whatever Python version
virtualenvwrapper is set to. Installation in a virtual environment can be
a bit weird with GeoPySpark. This is why you need to export the
PYTHONPATH before installing to ensure that it performs correctly.
make virtual-installmake build
pip install -e .Note: Before begining this section, it should be noted that python-mapnik,
a dependency for GeoNotebook, has been found to be difficult to install. If
problems are encountered during installation, a possible work around would be
to run make wheel and then do docker cp the wheel into the
GeoPySpark docker container and install it from there.
GeoNotebook is a Jupyter notebook extension that specializes in working with geospatial data. GeoPySpark can be used with this notebook; which allows for a more interactive experience when using the library. For this section, we will be installing both tools in a virtual environment. It is recommended that you start with a new environment before following this guide.
Because there's already documentation on how to install GeoPySpark in a virtual environment, we won't go over it here. As for GeoNotebook, it also has a section on installation so that will not be covered here either.
Once you've setup both GeoPySpark and GeoNotebook, all that needs to be done is go to where you want to save/have saved your notebooks and execute this command:
jupyter notebookThis will open up the jupyter hub and will allow you to work on your notebooks.
It is also possible to develop with both GeoPySpark and GeoNotebook in editable mode. To do so you will need to re-install and re-register GeoNotebook with Jupyter.
pip uninstall geonotebook
git clone --branch feature/geotrellis https://github.com/geotrellis/geonotebook ~/geonotebook
pip install -r ~/geonotebook/prerequirements.txt
pip install -r ~/geonotebook/requirements.txt
pip install -e ~/geonotebook
jupyter serverextension enable --py geonotebook
jupyter nbextension enable --py geonotebook
make notebookThe default Geonotebook (Python 3) kernel will require the following environment variables to be defined:
export PYSPARK_PYTHON="/usr/local/bin/python3"
export SPARK_HOME="/usr/local/apache-spark/2.1.1/libexec"
export PYTHONPATH="${SPARK_HOME}/python/lib/py4j-0.10.4-src.zip:${SPARK_HOME}/python/lib/pyspark.zip"Make sure to define them to values that are correct for your system.
The make notebook command also makes used of PYSPARK_SUBMIT_ARGS variable defined in the Makefile.
GeoNotebook/GeoTrellis integration in currently in active development and not part of GeoNotebook master.
The latest development is on a feature/geotrellis branch at <https://github.com/geotrellis/geonotebook>.
An optional (but recommended!) step for developers is to place these two lines of code at the top of your notebooks.
%load_ext autoreload
%autoreload 2This will make it so that you don't have to leave the notebook for your changes
to take affect. Rather, you just have to reimport the module and it will be
updated. However, there are a few caveats when using autoreload that can be
read here.
Using pip install -e in conjunction with autoreload should cover any
changes made, though, and will make the development experience much less
painful.
When GeoPySpark is installed, it comes with a script which can be accessed from anywhere on you computer. These are the commands that can be ran via the script:
geopyspark install-jar -p, --path [download/path] //downloads the jar file
geopyspark jar-path //returns the relative path of the jar file
geopyspark jar-path -a, --absolute //returns the absolute path of the jar fileThe first command is only needed when installing GeoPySpark through pip;
and it must be ran before using GeoPySpark. If no path is selected, then
the jar will be installed wherever GeoPySpark was installed.
The second and third commands are for getting the location of the jar file.
These can be used regardless of installation method. However, if installed
through pip, then the jar must be downloaded first or these commands
will not work.
GeoPySpark uses the pytest testing framework to run its unittests. If you wish to run GeoPySpark's unittests, then you must first clone this repository to your machine. Once complete, go to the root of the library and run the following command:
pytestThis will then run all of the tests present in the GeoPySpark library.
Note: The unittests require additional dependencies in order to pass fully. pyrproj, colortools, and matplotlib (only for >=Python3.4) are needed to ensure that all of the tests pass.
- install - install GeoPySpark python package locally
- wheel - build python GeoPySpark wheel for distribution
- pyspark - start pyspark shell with project jars
- build - builds the backend jar and moves it to the jars sub-package
- clean - remove the wheel, the backend jar file, and clean the geotrellis-backend directory
To uninstall GeoPySpark, run the following in the terminal:
pip uninstall geopyspark
rm .local/bin/geopysparkAny kind of feedback and contributions to GeoPySpark is always welcomed. A CLA is required for contribution, see Contributing for more information.