An overflow-protected fixed-point arithmetic library for Solidity.
FixidityLib provide fixed point arithmetic for Solidity. This is achieved by using int256 as the type throughout the library and designating a number of digits in each int256 for holding the fractional part. This is equivalent to displacing the comma in a non-integer number a fixed number of positions to the left. All the arithmetic operations that have been implemented maintain constant the number of digits to the left of the comma that are represented.
The main arithmetic operations currently supported are addition, subtraction, multiplication, division and logarithms. In a near future exponentials and square roots might be supported.
In addition to fixed-point airthmetic operations, FixidityLib is fully protected against overflow. Any operation that causes an overflow to happen will revert.
A number of constants have been provided that identify the safe limits for operation. When fixed-point arithmetic operations are done with values between zero and a limit there will be no overflows and therefore the functions will never revert. It would be then useful in some cases to use those limits to reject user inputs with an informative message when those inputs might cause erratic behaviour. With careful consideration it is possible to perform operations with values that are beyond the limits, but doing so must only be done with appropriate knowledge of range of each operator.
FixidityLib currently assumes 24 digits as the desired size for the decimal part. To change this to a different value the constants need to be adjusted. The formulas used to calculate the constants have been provided to facilitate this. All other functions will work as long as the constants are consistent.
An extensive collection of tests was created to prove the robustness of FixidityLib, and they should be run whenever a change in the digits is done.
Currently FixidityLib doesn't use its own type, so it is up to the user to remember whether a given int256 is a FixidityLibe fixed point number or not, and to take care to use the newFixed() and fromFixed() functions accordingly to create fixed point numbers and convert them back to non-integers.
This library implements addition, subtraction, multiplication and division, along with the related constants and limits.
function digits() public pure returns(uint8) Number of positions that the comma is shifted to the right. Default: 24
function fixed1() public pure returns(int256) This is 1 in the fixed point units used in this library. Calculated as fixed1() = equals 10^digits() Default: 1000000000000000000000000000000000000
function mulPrecision() public pure returns(int256) The amount of decimals lost on each multiplication operand. Calcualted as mulPrecision() = sqrt(fixed1) Default: 1000000000000000000
function maxInt256() public pure returns(int256) Maximum value that can be represented in an int256 Calculated as maxInt256() = 2^255 -1 Default: 57896044618658097711785492504343953926634992332820282019728792003956564819967
function minInt256() public pure returns(int256) Minimum value that can be represented in an int256 Calculated as minInt256() = (2^255) * (-1) Default: -57896044618658097711785492504343953926634992332820282019728792003956564819968
function maxNewFixed() public pure returns(int256) Maximum value that can be converted to fixed point. Default: 57896044618658097711785492504343953926634
function minNewFixed() public pure returns(int256) Maximum value that can be converted to fixed point. Calculated as minNewFixed() = -(maxInt256()) / fixed1() Default: -57896044618658097711785492504343953926634
function maxFixedAdd() public pure returns(int256) Maximum value that can be safely used as an addition operand. Additions with one operand over this value might overflow, but not necessarily so. Calculated as maxFixedAdd() equals maxInt256()-1 / 2 Default: 28948022309329048855892746252171976963317496166410141009864396001978282409983
function maxFixedSub() public pure returns(int256) Maximum negative value that can be safely subtracted. Operations where values larger than maxFixedSub() are subtracted might overflow, but not necessarily so. Calculated as maxFixedSub() = minInt256() / 2 Default: -28948022309329048855892746252171976963317496166410141009864396001978282409984
function maxFixedMul() public pure returns(int256) Maximum value that can be safely used as a multiplication operator. Divisions where a value is divided by another over this value might overflow, but not necessarily so. Calculated as maxFixedMul() = sqrt(maxNewFixed())*fixed1(). Default: 240615969168004511545000000000000000000000000000000000000
function maxFixedDiv() public pure returns(int256) Maximum value that can be safely used as a dividend. Operations where values larger than maxFixedDiv() are divided might overflow, but not necessarily so. Calculated as divide(maxFixedDiv,newFixedFraction(1,fixed1())) = maxInt256(). Default: 57896044618658097711785492504343953926634 }
function maxFixedDivisor() public pure returns(int256) Maximum value that can be safely used as a divisor. The divide(x, y) function uses reciprocal(y), and numbers above maxFixedDivisor() will cause a division by zero. Calculated as maxFixedDivisor() = fixed1()*fixed1() Default: 1000000000000000000000000000000000000000000000000000000000000000000000000
function newFixed(int256 x) Converts an int256 to fixed point units, equivalent to multiplying by 10^digits().
function fromFixed(int256 x) Converts an int256 in the fixed point representation of this library to a non decimal. All decimal digits will be truncated.
function convertFixed(int256 x, uint8 _originDigits, uint8 _destinationDigits) Converts an int256 which is already in some fixed point representation to a different fixed precision representation. Both the origin and destination precisions must be 38 or less digits. Origin values with a precision higher than the destination precision will be truncated accordingly.
function newFixed(int256 x, uint8 _originDigits) Converts an int256 which is already in some fixed point representation to that of this library. The _originDigits parameter is the precision of x. Values with a precision higher than FixidityLib.digits() will be truncated accordingly.
function fromFixed(int256 x, uint8 _destinationDigits) Converts an int256 in the fixed point representation of this library to a different representation. The _destinationDigits parameter is the precision of the output x. Values with a precision below than FixidityLib.digits() will be truncated accordingly.
function newFixedFraction(int256 numerator, int256 denominator) Converts two int256 representing a fraction to fixed point units, equivalent to multiplying dividend and divisor by 10^digits() and then dividing them.
function integer(int256 x) public pure returns (int256) Returns the integer part of a fixed point number, still in fixed point format.
function fractional(int256 x) public pure returns (int256) Returns the fractional part of a fixed point number. In the case of a negative number the fractional is also negative.
function abs(int256 x) public pure returns (int256) Converts to positive if negative. Due to int256 having one more negative number than positive numbers abs(minInt256) reverts.
function add(int256 x, int256 y) public pure returns (int256) x+y. If any operator is higher than maxFixedAdd() it might overflow.
function subtract(int256 x, int256 y) public pure returns (int256) x-y. You can use add(x,-y) instead.
function multiply(int256 x, int256 y) public pure returns (int256) x*y. If any of the operators is higher than maxFixedMul() it might overflow.
function reciprocal(int256 x) public pure returns (int256) 1/x.
function divide(int256 x, int256 y) public pure returns (int256) x/y. If the dividend is higher than maxFixedDiv() it might overflow. You can use multiply(x,reciprocal(y)) instead. There is a loss of precision on division for the lower mulPrecision() decimals.
This library extends FixidityLib by implementing logarithms, along with the related constants and limits.
function fixedE() public pure returns(int256) This is e in the fixed point units used in this library. Default: 27182818284590452353602874713526624977572470936999595749669676277240766303535/fixed1()
function fixedLn1_5() public pure returns(int256) ln(1.5) Default: 405465108108164381978013115464349137;
function fixedLn10() public pure returns (int256) ln(10) Default: 2302585092994045684017991454684364208;
function ln(int256 value) public pure returns (int256) ln(x). This function has a 1/50 deviation close to ln(-1), 1/maxFixedMul() deviation at fixedE()**2, but diverges to 10x deviation at maxNewFixed().
function log_b(int256 b, int256 x) public pure returns (int256) log_b(x)
- int256 b Base in fixed point representation.
- int256 x Value to calculate the logarithm for in fixed point representation.