Skip to content
This repository has been archived by the owner on May 25, 2018. It is now read-only.
/ Muninator Public archive

Rails plugin that implements the munin-node protocol to allow Rails internals to be graphed by Munin.

Notifications You must be signed in to change notification settings

jimsynz/Muninator

Repository files navigation

Easy extensible graphing of your Rails app using Munin

I have used Munin for years to monitor machines that I am looking after and recently, after migrating my sites to a new linode I found myself setting up munin-node again and reflecting on Munin's very simple protocol to talking to nodes over the network.

I had been lamenting the lack of visibility of what's going on inside my rails app without going overboard with products like New Relic's RPM, so I decided to write a rails plugin that turns your Rails application into a munin-node by implementing the protocol that Munin uses. This, like Munin's protocol itself, was trivially easy.

It's my pleasure to present Muninator. I have it running for. As you can tell from my graphs, this site doesn't exactly get a lot of traffic, but I think you get the idea.

Installation

Getting Muninator running in your app is trivially easy, start by installing the plugin (preferred for Rails 2)

$ ./script/plugin install git://github.com/jamesotron/Muninator.git

Or Just add the 'muninator' gem to your application's Gemfile (preferred way for Rails 3)

gem 'muninator'

Configuration

Next create config/muninator.yml and tell it what environments, ports, etc you want it to use (most likely you only want to monitor your production environment, but just like config/database.yml you can specify configs for development and test also).

$ rails generate muninator:install

Here I am instructing Muninator to listen on TCP port 4950 (Munin-node usually uses 4949, but I am incrementing from there) and the server_name attribute must match that configured in your munin.conf (more on that later). The restrict option can be a list of IP addresses or localhost which is an alias for ::1, fe80::1 and 127.0.0.1.

$ cat <<EOF > config/muninator.yml
> production:
>   server_name: myrailsapp.com
>   port: 4950
>   restrict: localhost
>   # standalone: true
> EOF

If you set standalone to true, you will be able to start muninator by its own by invoking script/muninator - you will loose your controller / performance benchmarks but the server will be always up.

Data Sources

Build in

By default Muninator will load plugins to monitor process memory usage (resident and virtual size), disk I/O and thread state. I expect these don't give very accurate data however when running on systems like Passenger which will fork multiple instances of the application, although they do give you an idea of how much memory each instance is using and whether it is grinding.

Models

You can also add automagic monitoring of your models (at the moment, just total row count plus additions and modifications) by calling the acts_as_munin_plugin class method within your models. You might also want to add an explicit call to the model class in your config/initializers/muninator.rb to make sure that the model is loaded at application start-up (by default models are lazy-loaded by Rails).

Controllers

In addition to automagic monitoring of models you get detailed monitoring of controller actions for no extra cost by calling the monitor_with_munin class method within your controller. By default it will monitor all RESTful actions (ie :index, :new, :create, :show, :edit, :update and :destroy), or you can specify arbitrary actions by adding an argument like so: :actions => [ :action_name, :other_action_name ]. The default controller monitoring will give you per action monitoring of hits, response time and response size.

Custom

If you want to have full control over your data sources, you can create so called templates in your application's app/munin directory. You have to create two files: .config and .fetch. For example:

$ cat app/munin/things.config
graph_title Things
graph_category My Rails app
graph_info Things your app knows about
graph_vlabel count
graph_args --base 1000 -l 0
all.label all
all.type GAUGE
all.min 0

$ cat app/munin/things.fetch
all.value <%= Thing.count %>

Running

You can now restart your Rails app, and Muninator will be listening on the specified port waiting for a connection from your Munin collector:

$ sudo lsof -n | grep :4950
ruby       6514      jnh    5u     IPv4    4002312       0t0        TCP *:4950 (LISTEN)

Getting Munin itself installed is beyond the scope of this article, and there are some pretty good docs on Munin's site to help you. Debian/Ubuntu users can just apt-get install munin and it will take care of the bulk of the work for you. The relevant parts of my munin.conf for mashd.cc look like this:

$ cat /etc/munin/munin.conf
[Rails;]
  use_node_name yes

[Rails;mashd.cc]
  address 127.0.0.1
  port 4950

Gotcha

The only other potential gotcha is that platforms like Passenger will shut down your rails apps if they don't have any hits for a while, leaving large blank patches in your graphs. This might actually be desirable (especially on low memory environments), however I whipped up the following which I run in cron just before the munin-update job:

awk '/^\[Rails\;(.+)\]$/{print gensub(/.*;(.+)]/,"wget -O /dev/null -q http://\\1","")}' /etc/munin/munin.conf  | sh

Another way is to run muninator as a standalone server. See Configuration above.

Write your own plugins

If you wish to create your own Muninator plugin (or plugins) to monitor a specific part of your application then it's dead simple. All you have to do is add a class to Muninator::Commands that implements config() and fetch() class methods which return strings in the format expected by Munin. Take a look at the source for Muninator's memory plugin for about the simplest possible plugin. If you plugin is even vaguely useful to others then please feel free to contribute it either by forking on Github and sending me a pull request, or just hit me on twitter

License

This plugin is licensed under the terms of the Mozilla Public License version 1.1 or later and Copyright (c) 2010, 2011 James Harton.

About

Rails plugin that implements the munin-node protocol to allow Rails internals to be graphed by Munin.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published