| LOCATION | BLOCK | SIZE.B | DESCRIPTION |
|---|---|---|---|
| 0x000000 - 0x00FE00 | 0x0000 - 0x007F | 65024 | MBR or GPT table |
| 0x010000 - 0x01FE00 | 0x0080 - 0x00FF | 65024 | FDT |
| 0x020000 - 0x03FE00 | 0x0100 - 0x01FF | 130560 | SPL.backup1 (first copy used) |
| 0x040000 - 0x05FE00 | 0x0200 - 0x02FF | 130560 | SPL.backup2 (second copy used) |
| 0x060000 - 0x0DFE00 | 0x0300 - 0x06FF | 519936 | U-Boot |
| 0x0e0000 - 0x11FE00 | 0x0700 - 0x08FF | 261632 | U-Boot Env |
| 0x120000 - 0x93FE00 | 0x0900 - 0x49FF | 8519168 | ONIE |
$ git clone https://github.com/jjangmua/onie.git
$ git checkout ti_bone-r0
$ cd onie/build-config/
$ make MACHINEROOT=../machine/ti MACHINE=ti_bone all
Once the compile has been finished you will be found the output file on onie/build/images/ directory
- ti_bone-r0.MLO
- ti_bone-r0.boot.img
- ti_bone-r0.dtb
- ti_bone-r0.itb
=> mmc dev 1
=> tftp $loadaddr ti_bone-r0.MLO
=> mmc write $loadaddr 100 100
=> mmc write $loadaddr 200 100
=> tftp $loadaddr ti_bone-r0.boot.img
=> mmc write $loadaddr 300 400
=> mmc dev 1
=> tftp $loadaddr ti_bone-r0.itb
=> mmc write $loadaddr 900 4000
After the installation has been completed, you can run "run onie_rescue" in the uboot to bootup to the ONIE