password of mantic image not correct.

[iObUGGY]

Hi,

The password of the image ubuntu-mantic-arm64-ait4da.bin.gz not correct.Can you pls check?

Thanks in advance.

[johang]

It's probably correct. The builds are automated.

[iObUGGY]

Thank you, I appreciate your time.<https://www.linguee.fr/anglais-francais/traduction/i+appreciate+your+time.html> Kind regards. Envoyé à partir de Courrier<https://go.microsoft.com/fwlink/?LinkId=550986> pour Windows De : Johan ***@***.***> Envoyé le :Friday, 22 December 2023 23:29 À : ***@***.***> Cc : ***@***.***>; State ***@***.***> Objet :Re: [johang/sd-card-images] password of mantic image not correct. (Discussion #97) It's probably correct. The builds are automated. — Reply to this email directly, view it on GitHub<#97 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/A56ZPJGU4476EXCGLBCXUYLYKYCTXAVCNFSM6AAAAABA7RHP6KVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TSMZRGMYTA>. You are receiving this because you modified the open/close state.Message ID: ***@***.***>

[RASTRILL0]

I am having the same problem using the Orange Pi Zero image on an Orange Pi Zero LTS. Password is supposed to be aevoo9 but it doesn't seem to work:

root@rpi4:~# wget https://dl.sd-card-images.johang.se/boots/2024-01-01/boot-orange_pi_zero.bin.gz
--2024-01-03 13:05:53--  https://dl.sd-card-images.johang.se/boots/2024-01-01/boot-orange_pi_zero.bin.gz
Resolving dl.sd-card-images.johang.se (dl.sd-card-images.johang.se)... 18.154.185.87, 18.154.185.44, 18.154.185.62, ...
Connecting to dl.sd-card-images.johang.se (dl.sd-card-images.johang.se)|18.154.185.87|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 335206 (327K) [application/octet-stream]
Saving to: 'boot-orange_pi_zero.bin.gz.1'

boot-orange_pi_zero.bin.gz.1      100%[===========================================================>] 327.35K  --.-KB/s    in 0.09s   

2024-01-03 13:05:53 (3.69 MB/s) - 'boot-orange_pi_zero.bin.gz.1' saved [335206/335206]

root@rpi4:~# wget https://dl.sd-card-images.johang.se/debians/2024-01-01/debian-bookworm-armhf-aevoo9.bin.gz
--2024-01-03 13:05:59--  https://dl.sd-card-images.johang.se/debians/2024-01-01/debian-bookworm-armhf-aevoo9.bin.gz
Resolving dl.sd-card-images.johang.se (dl.sd-card-images.johang.se)... 18.154.185.87, 18.154.185.44, 18.154.185.62, ...
Connecting to dl.sd-card-images.johang.se (dl.sd-card-images.johang.se)|18.154.185.87|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 158357956 (151M) [application/octet-stream]
Saving to: 'debian-bookworm-armhf-aevoo9.bin.gz'

debian-bookworm-armhf-aevoo9.bin. 100%[===========================================================>] 151.02M  34.3MB/s    in 4.6s    

2024-01-03 13:06:04 (33.2 MB/s) - 'debian-bookworm-armhf-aevoo9.bin.gz' saved [158357956/158357956]

root@rpi4:~# zcat boot-orange_pi_zero.bin.gz debian-bookworm-armhf-aevoo9.bin.gz > sd-card.img
root@rpi4:~# dd if=sd-card.img of=/dev/sda1
7419904+0 records in
7419904+0 records out
3798990848 bytes (3.8 GB, 3.5 GiB) copied, 84.7961 s, 44.8 MB/s
root@rpi4:~# ssh root@192.168.0.115
root@192.168.0.115's password: 
Permission denied, please try again.

[johang]

I think the password is correct. This is tested weekly by with GitHub Actions.