Skip to content

Commit

Permalink
Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-…
Browse files Browse the repository at this point in the history 
…device
  • Loading branch information
@haverland
haverland committed Nov 28, 2022
2 parents a096cf7 + 2901263 commit f68695a
Showing 1 changed file with 34 additions and 26 deletions.
60 changes: 34 additions & 26 deletions Changelog.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -2,32 +2,38 @@

## [Unreleased]

## [13.0.11] - 2022-11-28

**Home Assistant MQTT Discovery Support**

### Update Procedure

:bangbang: **Make sure to read the instructions below carfully!**.

1. Backup your configuration (use the `System -> Backup/Restore` page)!
1. You should update to `12.0.1` before you update to this release. All other migrations are untested.
1. Upload and update the `update-*.zip` file from this release.
1. Let it restart and check on the `System -> Info` page that the Firmware as well as the Web UI got updated. If only one got updated, redo the update. If it fails several times, you also can update the Firmware and the Web UI separately.
1. Safe way:
1. Update first the `firmware.bin` (extract from zip file) and do the Reboot
1. Update with the full zip file (`update-*.zip`, ignore the version warning after the reboot)

1. Please go to `Settings -> Configuration` and address the changed parameters:
* DataLogging (storing the values for data graph)
* Debug (extended by different debug reporting levels)
2. You should update to `12.0.1` before you update to this release. All other migrations are untested.

3. Upload and update the `update-*.zip` file from this release.

4. Let it restart and check on the `System -> Info` page that the Firmware as well as the Web UI got updated. If only one got updated, redo the update. If it fails several times, you also can update the Firmware and the Web UI separately.

5. Safe way:
1. Update first the `firmware.bin` (extract from zip file) and do the Reboot
2. Update with the full zip file (`update-*.zip`, ignore the version warning after the reboot)

6. Please go to `Settings -> Configuration` and address the changed parameters:
- DataLogging (storing the values for data graph)
- Debug (extended by different debug reporting levels)

If anything breaks you can try to enforce manual update as following:

**OTA:**
1. Make sure the last run of the update completed the **Uploading** step.
1. Call `http://<IP>/ota?task=update&file=<UPLOAD_FILENAME>` to enforce the extraction/flashing.
1\. Make sure the last run of the update completed the **Uploading** step.
1\. Call `http://<IP>/ota?task=update&file=<UPLOAD_FILENAME>` to enforce the extraction/flashing.

**Initial Setup:**
1. Use the initial_esp32_setup.zip ( <https://github.com/jomjol/AI-on-the-edge-device/wiki/Installation> ) as alternative to have a clean install.

1\. Use the initial_esp32_setup.zip ( <https://github.com/jomjol/AI-on-the-edge-device/wiki/Installation> ) as alternative to have a clean install.

### Added

Expand All @@ -38,40 +44,40 @@ If anything breaks you can try to enforce manual update as following:
- Format: csv - comma separated
- Content: `time`, `name-of-number`, `raw-value`, `return-value`, `pre-value`, `change-rate`, `change-absolute`, `error-text`, `cnn-digital`, `cnn-analog`
- Show graph of values direct in the user interface (thanks to [@rdmueller](https://github.com/rdmueller))

- Using new data logging (see above)
- Possibility to choose different values and switch between different numbers (if present)

Note: You need to activate data logging for this feature to work, see above!
- PreValue is now contained in `/json` ([#1154](https://github.com/jomjol/AI-on-the-edge-device/issues/1154))
- SD card info into the `System>Info` menu (thanks to [@Slider007]( https://github.com/Slider0007))
- SD card info into the `System>Info` menu (thanks to [@Slider007](https://github.com/Slider0007))
- Version check (Firmware vs. Web UI)
- Various minor new features


### Changed

- Updated tflite (`dig-cont_0600_s3.tflite`)
- Updated OTA functionality (more robust, but not fully bullet prove yet)
- Updated Espressif library to `espressif32@v5.2.0`
- [#1176](https://github.com/jomjol/AI-on-the-edge-device/discussions/1176) accept minor negative values (-0.2) if extended resolution is enabled
- [#1143](https://github.com/jomjol/AI-on-the-edge-device/issues/1143) added config parameter `AnalogDigitalTransitionStart`. It can setup very early and very late digit transition starts.
- New version of `dig-class100` (v1.4.0): added images of heliowatt powermeter
- New version of `dig-class100` (v1.4.0): added images of heliowatt powermeter

### Fixed

- [#1116](https://github.com/jomjol/AI-on-the-edge-device/issues/1116) precision problem at setting prevalue
- [#1119](https://github.com/jomjol/AI-on-the-edge-device/issues/1119) renamed `firmware.bin` not working in OTA
- [#1143](https://github.com/jomjol/AI-on-the-edge-device/issues/1143) changed postprocess for `analog->digit` (lowest digit processing)
- [#1280](https://github.com/jomjol/AI-on-the-edge-device/issues/1280) check ROIs name for unsupported characters
- [#983](https://github.com/jomjol/AI-on-the-edge-device/issues/983) old log files did not get deleted
- Failed NTP time sync during startup gets now retried every round if needed
- Whitespaces and `=` in MQTT and InfluxDB passwords
- Various minor fixes and improvements
- [#1280](https://github.com/jomjol/AI-on-the-edge-device/issues/1280) check ROIs name for unsupported characters
- [#983](https://github.com/jomjol/AI-on-the-edge-device/issues/983) old log files did not get deleted
- Failed NTP time sync during startup gets now retried every round if needed
- Whitespaces and `=` in MQTT and InfluxDB passwords
- Various minor fixes and improvements

### Removed

- n.a.


## [12.0.1] 2022-09-29

Improve **u**ser e**x**perience
Expand All @@ -88,8 +94,8 @@ Improve **u**ser e**x**perience
5. Now you can reboot.

If anything breaks you can try to
1. Call `http://<IP>/ota?task=update&file=firmware.bin` resp. `http://<IP>/ota?task=update&file=html.zip` if the upload successed but the extraction failed.
1. Use the initial_esp32_setup.zip ( <https://github.com/jomjol/AI-on-the-edge-device/wiki/Installation> ) as alternative.
1\. Call `http://<IP>/ota?task=update&file=firmware.bin` resp. `http://<IP>/ota?task=update&file=html.zip` if the upload successed but the extraction failed.
1\. Use the initial_esp32_setup.zip ( <https://github.com/jomjol/AI-on-the-edge-device/wiki/Installation> ) as alternative.

### Added

Expand Down Expand Up @@ -741,7 +747,9 @@ External Illumination

- Initial Version

[Unreleased]: https://github.com/jomjol/AI-on-the-edge-device/compare/12.0.1...HEAD
[Unreleased]: https://github.com/haverland/AI-on-the-edge-device/compare/13.0.11...HEAD

[13.0.11]: https://github.com/haverland/AI-on-the-edge-device/compare/12.0.1...13.0.11

[12.0.1]: https://github.com/jomjol/AI-on-the-edge-device/compare/11.3.1...12.0.1

Expand Down

0 comments on commit f68695a

Please sign in to comment.