Wrong angle / difference between reference image and real image

[zimbo86]

The Problem

My real image differs from the reference image.
Is this a known issue?
I can recreate this, when taking a new reference image it also looks fine and the number boxes are matching the digits.

Version

Release: v15.7.0 (Commit: 0d0b018+)

Logfile

[0d00h00m00s] 2024-11-04T14:24:54 <INF> [MAIN] =================================================
[0d00h00m00s] 2024-11-04T14:24:54 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2024-11-04T14:24:54 <INF> [MAIN] =================================================
[0d00h00m00s] 2024-11-04T14:24:54 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-11-04T14:24:54 <INF> [MAIN] Total heap: 4380199 byte
[0d00h00m04s] 2024-11-04T14:24:58 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2024-11-04T14:24:58 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 2024-11-04T14:24:58 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 2024-11-04T14:24:58 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2024-11-04T14:24:58 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 2024-11-04T15:24:58 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2024-11-04T15:24:58 <INF> [SNTP] time zone: +0100 Delta to UTC: 3600 seconds
[0d00h00m04s] 2024-11-04T15:24:58 <INF> [SNTP] Time is already set: 2024-11-04 15:24:58
[0d00h00m04s] 2024-11-04T15:24:58 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m04s] 2024-11-04T15:24:59 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m04s] 2024-11-04T15:24:59 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2024-11-04T15:24:59 <INF> [MAIN] Tag: 'v15.7.0', Release: v15.7.0 (Commit: 0d0b018+), Date/Time: 2024-02-17 00:15, Web UI: Release: v15.7.0 (Commit: 0d0b018+)
[0d00h00m05s] 2024-11-04T15:24:59 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m05s] 2024-11-04T15:24:59 <INF> [WLANINI] SSID: home.
[0d00h00m05s] 2024-11-04T15:24:59 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2024-11-04T15:24:59 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m05s] 2024-11-04T15:24:59 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2024-11-04T15:24:59 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 2024-11-04T15:24:59 <INF> [WIFI] Set hostname to: watermeter
[0d00h00m05s] 2024-11-04T15:24:59 <INF> [WIFI] Init successful
[0d00h00m07s] 2024-11-04T15:25:02 <INF> [WIFI] Connected to: xxxxxx, RSSI: -46
[0d00h00m09s] 2024-11-04T15:25:03 <INF> [WIFI] Assigned IP: 10.xxxxxx
[0d00h00m25s] 2024-11-04T15:25:19 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 300
[0d00h00m25s] 2024-11-04T15:25:19 <INF> [MAIN] SD card info: Name: SDABC, Capacity: 7661MB, Free: 7651MB
[0d00h00m27s] 2024-11-04T15:25:21 <INF> [MAIN] Initialization completed successfully

Expected Behavior

reference image matches the real image

Screenshots

Additional Context

No response

[caco3]

That's most likely because your alignment points are nod good enough. Add some stickers as shown here: https://jomjol.github.io/AI-on-the-edge-device-docs/Demo-Mode/

[zimbo86]

jepp, just noticed this also. Seems i didnt save one of my markes and uses a wrong position