mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node

ZONE_MOVABLE uses the remaining memory in each node.  Its starting pfn is
also aligned to MAX_ORDER_NR_PAGES.  It is possible for the remaining
memory in a node to be less than MAX_ORDER_NR_PAGES, meaning there is not
enough room for ZONE_MOVABLE on that node.

Unfortunately this condition is not checked for.  This leads to
zone_movable_pfn[] getting set to a pfn greater than the last pfn in a
node.

calculate_node_totalpages() then sets zone->present_pages to be greater
than zone->spanned_pages which is invalid, as spanned_pages represents the
maximum number of pages in a zone assuming no holes.

Subsequently it is possible free_area_init_core() will observe a zone of
size zero with present pages.  In this case it will skip setting up the
zone, including the initialisation of free_lists[].

However populated_zone() checks zone->present_pages to see if a zone has
memory available.  This is used by iterators such as walk_zones_in_node().
pagetypeinfo_showfree() uses this to walk the free_list of each zone in
each node, which are assumed to be initialised due to the zone not being
empty.  As free_area_init_core() never initialised the free_lists[] this
results in the following kernel crash when trying to read
/proc/pagetypeinfo:

[   67.534914] BUG: kernel NULL pointer dereference, address: 0000000000000000
[   67.535429] #PF: supervisor read access in kernel mode
[   67.535789] #PF: error_code(0x0000) - not-present page
[   67.536128] PGD 0 P4D 0
[   67.536305] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI
[   67.536696] CPU: 0 PID: 456 Comm: cat Not tainted 5.16.0 torvalds#461
[   67.537096] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
[   67.537638] RIP: 0010:pagetypeinfo_show+0x163/0x460
[   67.537992] Code: 9e 82 e8 80 57 0e 00 49 8b 06 b9 01 00 00 00 4c 39 f0 75 16 e9 65 02 00 00 48 83 c1 01 48 81 f9 a0 86 01 00 0f 84 48 02 00 00 <48> 8b 00 4c 39 f0 75 e7 48 c7 c2 80 a2 e2 82 48 c7 c6 79 ef e3 82
[   67.538259] RSP: 0018:ffffc90001c4bd10 EFLAGS: 00010003
[   67.538259] RAX: 0000000000000000 RBX: ffff88801105f638 RCX: 0000000000000001
[   67.538259] RDX: 0000000000000001 RSI: 000000000000068b RDI: ffff8880163dc68b
[   67.538259] RBP: ffffc90001c4bd90 R08: 0000000000000001 R09: ffff8880163dc67e
[   67.538259] R10: 656c6261766f6d6e R11: 6c6261766f6d6e55 R12: ffff88807ffb4a00
[   67.538259] R13: ffff88807ffb49f8 R14: ffff88807ffb4580 R15: ffff88807ffb3000
[   67.538259] FS:  00007f9c83eff5c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[   67.538259] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   67.538259] CR2: 0000000000000000 CR3: 0000000013c8e000 CR4: 0000000000350ef0
[   67.538259] Call Trace:
[   67.538259]  <TASK>
[   67.538259]  seq_read_iter+0x128/0x460
[   67.538259]  ? aa_file_perm+0x1af/0x5f0
[   67.538259]  proc_reg_read_iter+0x51/0x80
[   67.538259]  ? lock_is_held_type+0xea/0x140
[   67.538259]  new_sync_read+0x113/0x1a0
[   67.538259]  vfs_read+0x136/0x1d0
[   67.538259]  ksys_read+0x70/0xf0
[   67.538259]  __x64_sys_read+0x1a/0x20
[   67.538259]  do_syscall_64+0x3b/0xc0
[   67.538259]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   67.538259] RIP: 0033:0x7f9c83e23cce
[   67.538259] Code: c0 e9 b6 fe ff ff 50 48 8d 3d 6e 13 0a 00 e8 c9 e3 01 00 66 0f 1f 84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28
[   67.538259] RSP: 002b:00007fff116e1a08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[   67.538259] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f9c83e23cce
[   67.538259] RDX: 0000000000020000 RSI: 00007f9c83a2c000 RDI: 0000000000000003
[   67.538259] RBP: 00007f9c83a2c000 R08: 00007f9c83a2b010 R09: 0000000000000000
[   67.538259] R10: 00007f9c83f2d7d0 R11: 0000000000000246 R12: 0000000000000000
[   67.538259] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[   67.538259]  </TASK>

Fix this by checking that the aligned zone_movable_pfn[] does not exceed
the end of the node, and if it does skip creating a movable zone on this
node.

Link: https://lkml.kernel.org/r/20220215025831.2113067-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Fixes: 2a1e274 ("Create the ZONE_MOVABLE zone")
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

mm/page_alloc.c

@@ -7998,10 +7998,17 @@ static void __init find_zone_movable_pfns_for_nodes(void)
 
 out2:
 	/* Align start of ZONE_MOVABLE on all nids to MAX_ORDER_NR_PAGES */
-	for (nid = 0; nid < MAX_NUMNODES; nid++)
+	for (nid = 0; nid < MAX_NUMNODES; nid++) {
+		unsigned long start_pfn, end_pfn;
+
 		zone_movable_pfn[nid] =
 			roundup(zone_movable_pfn[nid], MAX_ORDER_NR_PAGES);
 
+		get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
+		if (zone_movable_pfn[nid] >= end_pfn)
+			zone_movable_pfn[nid] = 0;
+	}
+
 out:
 	/* restore the node_state */
 	node_states[N_MEMORY] = saved_node_state;