JRP Digital Scores

This repository contains digital music scores in the Humdrum data format from the Josquin Research Project. The primary web interface for these scores is http://josquin.stanford.edu which allows online searching and browsing, conversions into other data formats, such as MIDI and graphical notation, as well as interfaces to some online analysis tools. These scores encompass music of the early Renaissance (ca. 1420 to ca. 1540), mostly representing the Franco-Flemish School and are mainly intended for computational analysis. As a result only a few works include text/lyrics suitable for vocal performance.

A peculiar aspect in music of the sixteenth century (from a modern viewpoint) is an incomplete notation of accidentals needed for performance. Editorial accidentals have been added to these scores to realize the performance practice of the time. An "i" character immediately following an accidental indicates that it was not written in the original notation. When written without an "i" after it, the accidental is found in the original notation, either from the key signature, or an explicit accidental written immediately before the note.

Another conceptual difference is the use of mensuration signs. These evolved (decayed) into modern time signatures. The most common mensuration in the music is Cut-C, from which modern cut-time originates. In this mensuration the beat is at the whole-note rhythmic level, and the metric cycle is two beats (a breve). Circle mensuration is the second most common mensuration in the music. This represents three whole-note beats per rhythmic cycle (dotted/perfect breve). Mensuration signs also convey tempo, so MIDI files on the JRP website made from these scores typically interpret tempo from the mensuration signs in the data (with the tempo of the whole notes slowing down over the generations due to smaller rhythmic values becoming more common). Modern time signatures are present in the data as a result of using music notation software for data entry and are of secondary concern (notice that they are not displayed in the scores on the JRP website, but use rather for metric analyses.

Barlines had not yet been invented in the fifteenth century, so all barlines in the data are interpreted; however, these are less open to interpretation compared to editorial accidentals. Typically barlines represent breves (double whole notes) durations, although they sometimes represent longs (quadruple whole notes), and may include patterns of dashed and solid lines to indicate the implied long (solid lines) and breve (dash line) metric grid of the music. In Circle mensuration the mensural breve is a dotted double whole note in modern notation.

All parts are encoded in modern notation, but sensitive to the original mensural notation intent of the fifteenth century. The main difference is that all rhythmic durations and augmentation dots are made explicit rather than dependent on a note's musical context. Since the original parts were not written in modern score layout during the fifteenth century (see an example of a partbook), mensuration changes sometimes do not occur at the same point in each part. For example, one part may have a whole note in Cut-C mensuration while another part has a dotted whole note in 3 mensuration, called sesquialtera. This is represented in the data with the same rhythmic duration in each part, usually as a whole note and a triplet dotted whole note using an *rscale:3/2 interpretation in the second part to indicate that it is to be displayed with a rhythmic duration 3/2 longer (i.e., convert the triplet dotted whole note into a non-triplet dotted whole note).

In mensural music (particularly in masses) the voices are sometimes notated in conflicting note values, related in part to using less common mensurals signs such as C-dot and O-dot. (Colloquially we refer to a voice being "augmented" or "diminished" relative to the others.) The most common situation is for a half-note in the tenor to have the same duration as a whole-note in another part. The *rscale rhythmic-scaling interpretation will also be used in these cases. All parts in the data have a 1:1 rhythmic scaling in the modern sense against each other for analytic purposes. Applying the *rscale factor will cause a part to be displayed in its original rhythmic values (i.e., reverse the resolution of the augmentation/diminution).

Triplet brackets are given explicitly in the data using "V" and "Z" characters. Triplet brackets indicate music that was originally in colored notation, which is a mensural equivalent of triplets (although coloration can be used for other purposes as well). Music in 3-mensuration (an alternate mensural method of showing triplets) may be represented as modern rhythmic triplets in the data, but will not contain triplet brackets. Mostly commonly 3-mensurtion music is represented in 3/1 modern time signatures to be played 2/3rds faster, while colored notation are typically represented as triplets in 2/1 time signature. When the perceived beat is at the triplet wholenote level in colored notation, the modern time signature is given as 3/3%2 (which is not a standard time signature in modern notation). 3%2 represents 2/3rds of a whole notes, or in other words a triplet whole note. So a 2/1 measure has the same duation as 3/3%2 (two wholenotes equals three triplet wholenotes).

Ligatures are groups of notes with their heads attached to each other which typically gives information about the rhythm of the notes in mensural notation. Usually modern notation of mensural music will place brackets around individual notes which were originally part of a ligature group. However, ligatures are typically not indicated in this data.

Composers

Individual composer's works are archived independently, and each of their repositories can be viewed by clicking in the first column of the table below. Each composer is assigned a unique three-letter code listed in the first column that is the name of the directory in the meta-repository which contains each composer's works.

Ano	Anonymous	(JRP)	(Wikipedia)
Agr	Alexander Agricola	(JRP)	(Wikipedia)
Bru	Antoine Brumel	(JRP)	(Wikipedia)
Bus	Antoine Busnoys	(JRP)	(Wikipedia)
Com	Loyset Compere	(JRP)	(Wikipedia)
Das	Ludwig Daser	(JRP)	(Wikipedia)
Duf	Guillaume Du Fay	(JRP)	(Wikipedia)
Fry	Walter Frye	(JRP)	(Wikipedia)
Fva	Antoine de Fevin	(JRP)	(Wikipedia)
Gas	Gaspar van Weerbeke	(JRP)	(Wikipedia)
Isa	Henrich Isaac	(JRP)	(Wikipedia)
Jap	Jean Japart	(JRP)	(Wikipedia)
Jos	Josquin des Prez	(JRP)	(Wikipedia)
Mar	Johannes Martini	(JRP)	(Wikipedia)
Mou	Jean Mouton	(JRP)	(Wikipedia)
Obr	Jacob Obrecht	(JRP)	(Wikipedia)
Oke	Johannes Okeghem	(JRP)	(Wikipedia)
Ort	Marbrianus de Orto	(JRP)	(Wikipedia)
Pip	Matthaeus Pipelare	(JRP)	(Wikipedia)
Reg	Johannes Regis	(JRP)	(Wikipedia)
Rue	Pierre de la Rue	(JRP)	(Wikipedia)
Tin	Johannes Tinctoris	(JRP)	(Wikipedia)

Within each directory of the repository is a subdirectory called kern that contains the actual scores in the **kern data type of the Humdrum data file format. MIDI files can be downloaded from the JRP website by typing the command make midi in the root directory of the jrp-scores repository (provided that you have GNU make installed on your computer). PDF files for the musical scores (which are generated from the Humdrum data files found in this repository) can be downloaded with the command make pdf. PDF scores are printed with the MuseData printing system. A command-line version of this system is available at http://muse2ps.ccarh.org . MuseData generated from the Humdrum data files can be downloaded with the command make musedata.

Currently, composers with complete (or nearly complete) sets of encoded works include: Gaspar, Josquin, La Rue, Okeghem, and de Orto.

The relative size of each composer's work database can be viewed on the JRP Census page. You can count the number of works and notes for each composer by the command:

make note-counts-by-composer

Filenames

Each file in the database starts with a unique JRP catalog number. This consists of a three-letter composer ID as listed above, followed by a four-digit number to represent a specific work by that composer. Typically the first digit of the catalog number will indicate the genre of the work: 1 for masses, 2 for motets, and 3 for secular songs (see the !!!AGN reference record inside of the file for the actual genre designations). The music of Josquin is an exception, where the first two digits indicate its volume number in the New Josquin Edition, and the last two digits indicate the enumerated position of the work within that volume.

After the four-digit work number, an optional letter indicates that a movement-level encoding of a work is found in the file. This system is used for storing mass sections in separate files, where "a" is the first section (usually the Kyrie section), "b" is the second section (usually the Gloria section), and so on.

Work-level variants are indicated in the catalog number by adding a dot after the work number, followed by a variant number (of any digit length). Variants at the movement level are indicated by placing a dot after the variant letter(s) followed by a variant letter (or more than one lower-case letter). If a file contains an enumerable subsection of a movement, an optional digit will be appended to the catalog number (which may itself be followed by a dot and variant digits). Movement subsection numbers are not yet present in any datafile (and neither are Movement sub-subsections which would alternate back to letters like movement-level labels).

After the catalog number, each filename contains a dash followed by title information. The title information may have up to three fixed fields, each separated by a dash from the other. The first component of the title information is the title of the work. This is optionally followed by the title of the movement (i.e., mass section names, such as the standard sections: kyrie, gloria, credo, sanctus, and agnus [dei]). A third optional section of the title in the filename is variant information. Spaces in the title are encoded as underscore characters in the filenames. Two underscores in a row indicate a slash in the title. No accent marks are given in the filename titles since they are POSIX compliant; see the !!!OTL reference record within each file for the proper accentuation of work titles.

Title information in filenames are a courtesy for human beings. As such they can be removed from filenames, leaving only the unique catalog numbers. (Removing catalog numbers will not result in unique filenames since a composer may write several songs with the same title).

Download

To download this Github repository using git in a terminal, type:

git clone --recursive https://github.com/josquin-research-project/jrp-scores

The --recursive option is needed to download each of the individual composer repositories inside of the meta-repository.

In a unix terminal, you can check to see if git is installed by typing which git. If the terminal replies with a path to git, then you can proceed with the above cloning to download the repository. If not, then typically you can use a package manager to install git, such as apt-get install git or yum install git in linux. On Apple OS X computers, git can be installed directly from here or by more experienced users from a mac package manager such as Homebrew. If you have a comicbook-like view of the computer world, you can download GUI interfaces for git here. A Github/git plugin is also available for the Eclipse IDE (watch video).

This repository collects individual composer repositories as submodules. You can also download the composer repositories separatly, such as for Josquin:

git clone http://github.com/josquin-research-project/Jos

Update

After you have downloaded this repository with git, you can check periodically for updates for all composers' works using this command in the jrp-scores directory:

make update

Processing scores

The digital scores in this repository are designed to work with the Humdrum Toolkit (github). A makefile in the base directory of the repository contains some basic processing commands which either require Humdrum Extras (github) to manipulate the data files, or commands (starting with "web") which download data generated online by the JRP website.

Here are some of the make commands which you can run in the base directory of the downloaded repository:

No additional software needed:
make	List all of the possible make commands (i.e., this list).
make update	Download any updates to the online repository.
make clean	Delete directories of data created by this makefile, such as kern-reduced, midi, pdf, pdf-notext.
make notitle	Remove titles from files names and store in directory called kern-notitle in each composer's directory.
make web-pdf	Download PDF files for graphical music scores for each piece from the JRP website.
make web-pdf-notext	Download PDF files for graphical music scores for each piece from the JRP website with lyrics removed from all parts.
make web-reduced	Download version of the data file which divides all note durations by a factor of four. This data is useful for doing rhythmic analysis with the standard Humdrum Toolkit.
Humdrum Extras installation required:
make reduced	Decrease all note durations by a factor of four. Output data will be stored in a directory called kern-reduced within each composer's directory. Similar to make web-reduced, but much faster.
make notext	Remove lyrics from all parts. Resulting data will be stored in a directory called kern-notext within each composer's directory.
make genres	Download works organized by genre from kernScores.
Humdrum Toolkit installation required:
make census	Run census -k on all works.

Rhythm representation considerations

For proper rhythmic parsing in the Humdrum Toolkit, some files containing rational rhythmic values need to be diminuted by a factor of four to convert whole notes (typically the rhythmic level of a beat in the early Renaissance), into quarter notes (the typical modern rhythmic level for beats). This can be done with the rscale tool to apply a rhythmic scaling of 1/4 to all notes in all scores:

rscale -f 1/4 oldfile > newfile

A makefile in the base directory of this repository (this one contains instructions to generate reduced rhythmic versions of all files. Type (if Humdrum Extras is installed):

make reduced

or if humextras is not installed, type:

make web-reduced

Other example processing

Here are some other interesting processing actions:

• Determine works that include text/lyrics:

grep -rl '\\\*\\\*text' \*/kern/\*

Alternate data access

JRP website

The website http://josquin.stanford.edu is a high-level interface to these scores, but also includes lower-level access to the data, data conversions, and analytic tools using URL parameters from the https://data.josqu.in web address. On the JRP website, each score has a "work info" page generated with this format:

https://data.josqu.in/work?id=Jos2721.krn

Example MIDI data file access by setting the file extensiom to mid:

http://data.josqu.in/Jos2721-La_Bernardina.mid

Example graphical music scores in PDF format with four possible styles:

• Without editorial accidentals or text: http://josquin.stanford.edu/data?a=notationnoedit&f=Duf1005a-Missa_Se_la_face_ay_pale-Kyrie
• Without editorial accidentals but with text: http://josquin.stanford.edu/data?a=notationnoeditwithtext&f=Duf1005a-Missa_Se_la_face_ay_pale-Kyrie
• With editorial accidentals but without text: http://josquin.stanford.edu/data?a=notationwitheditorial&f=Duf1005a-Missa_Se_la_face_ay_pale-Kyrie
• With editorial accidentals and with text: http://josquin.stanford.edu/data?a=notationwitheditorialwithtext&f=Duf1005a-Missa_Se_la_face_ay_pale-Kyrie

Scores are generated from the original Humdrum **kern scores found in this repository for each work, so music notation in the PDF files should match exactly. Online PDF files of the scores are created using the hum2muse converter which translates Humdrum files into MuseData file which can then be converted into PostScript files with muse2ps.

kernScores website

The kernScores library of musical scores for analysis in the Humdrum Toolkit has a page dedicated to the JRP scores:

http://kern.humdrum.org/browse?l=jrp

Humdrum Extras tools/library

The Humdrum Extras tools/library (github) contains internal knowledge for how to download the digital scores on the command line. To download from the JRP website, the filename is prefixed by jrp://. To download from the kernScores website, the prefix is humdrum://, or h:// for short. KernScores access requires the exact file name (catalog number, title, file extension), while JRP access requires only the catalog number.

Examples:

humcat h://jrp/Jos/Jos2721-La_Bernardina.krn
humcat jrp://Jos2721-La_Bernardina.krn
humcat jrp://Jos2721

Since it requires the full filename for accessing individual files, the kernScores downloading method is instead mostly useful for downloading an entire set of composer's works. Try the following humextra command to download all of the works for Okeghem:

mkdir Oke; cd Oke; humsplit h://jrp/Oke

The kernScores website has five meta-collections of the scores: two for Josquin authenticity levels, and three for the main genres of mass, motet and song. These can be downloaded like this on the command line:

Secure Josquin set:	mkdir -p Joa/kern; (cd Joa/kern; humsplit h://jrp/Joa)
Not secure Josquin set:	mkdir -p Job/kern; (cd Job/kern; humsplit h://jrp/Job)
All mass sections:	mkdir -p Zma/kern; (cd Zma/kern; humsplit h://jrp/Zma)
All motets:	mkdir -p Zmo/kern; (cd Zmo/kern; humsplit h://jrp/Zmo)
All songs:	mkdir -p Zso/kern; (cd Zso/kern; humsplit h://jrp/Zso)

Type make genres in the base directory of the repository if Humdrum Extras is installed to download the Zma, Zmo, and Zso genre groupings from the kernScores website.

Type make Joa; make Job in the base directory of the repository if Humdrum Extras is installed to download the secure and not secure groupings of Josquin music.