Introduction

MicroPython Driver for the Bosch BMI270 Accelerometer/Gyro Sensor. Be aware that as far as I can tell you need to load the configuration first in order to use the sensor. The configuration will stay until the next Power-On.

Installing with mip

To install using mpremote

mpremote mip install github:jposada202020/MicroPython_BMI270

To install directly using a WIFI capable board

mip.install("github:jposada202020/MicroPython_BMI270")

Installing Library Examples

If you want to install library examples:

mpremote mip install github:jposada202020/MicroPython_BMI270/examples.json

To install directly using a WIFI capable board

mip.install("github:jposada202020/MicroPython_BMI270/examples.json")

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install micropython-bmi270

To install system-wide (this may be required in some cases):

sudo pip3 install micropython-bmi270

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .venv
source .env/bin/activate
pip3 install micropython-bmi270

Usage Example

Take a look at the examples directory

Documentation

API documentation for this library can be found on Read the Docs.