-
Electronics Dev. Engineer
- Houston
- http://www.n-bed.com
Popular repositories Loading
-
iLife_Robotic_Vaccum_v3s_Reverse_Engineer
iLife_Robotic_Vaccum_v3s_Reverse_Engineer PublicProject to reverse engineer the iLife v3s robotic vaccum. Trying to rewrite the firmware and use as a robotic platform and add a robotic arm.
-
Sony-Watchman-add-HDMI-and-Composite-Inputs
Sony-Watchman-add-HDMI-and-Composite-Inputs PublicAttempt to use an FPGA kit to convert HDMI/Composite into RF so I can use this sweet little CRT as a TV/Terminal
-
HX711
HX711 PublicForked from bogde/HX711
An Arduino library to interface the Avia Semiconductor HX711 24-Bit Analog-to-Digital Converter (ADC) for Weight Scales.
C++
-
HX711_ADC
HX711_ADC PublicForked from olkal/HX711_ADC
Arduino library for the HX711 24-bit ADC for weight scales
C++
-
IoT-Dehydrator-4D-systems-display-Sr-Design-8266-system-main-board
IoT-Dehydrator-4D-systems-display-Sr-Design-8266-system-main-board Public4D systems display on an 8266 interfaced with a 328p sensor board. Automated Drying system running off of Heat/Humidity parameters. This is the software for the main board from my senior design pro…
C++
-
328p-Sensor-Board-Sr-Design-Non-Blocking
328p-Sensor-Board-Sr-Design-Non-Blocking Public328p non blocking code running a sensor array of IR sensors,DHT22s, and barometer. Replace the sensor reads with your code to use in another project. This uses hardware uart to send structs (eztran…
C++
If the problem persists, check the GitHub status page or contact support.