The ENDF/B preprocessing codes (PREPRO) are a collection of 18 module codes, which are designed to convert ENDF/B formatted evaluated data from the originally distributed ENDF-6 format to formats in which the data can be used in application codes.
Features of the codes:
- ENDF-6 formatted data include pointwise, groupwise cross-sections, emitted particles angular distribution and spectra, particle and activation yields, multi-band parameters.
- Data can be plotted on-screen or plots can be saved as PostScript files to disk.
- The codes run on Linux, MacOS and Windows.
- PREPRO 2021 is ENDF/B-tested and completely Fortran, C and C++ compatible.
Citation
This computer code package should be cited as follows:
D.E. Cullen, "PREPRO 2021: ENDF/B Pre-processing Codes", report IAEA-NDS-0238, September, 2021
Important note for users of earlier versions:
Earlier versions of PREPRO (i.e., before version 2019) may not accurately process current ENDF/B evaluations due to recent changes in the ENDF-6 format and procedures. PREPRO 2021 can handle all past and present existing ENDF/B evaluations.
Relation to the PREPRO 2021 code provided on the IAEA-NDS website:
This repository is complementary to the PREPRO website of the Nuclear Data Section at the IAEA and contains the source files of the PREPRO 2021 codes. If you do not want to compile the codes yourself or are unsuccessful using the instructions provided below, you find executables for Linux, MacOS and Windows here. Additional makefiles are also provided there which may be more pertinent for your system.
These installation instructions have been only tested on Linux and MacOS. Assuming that git, GNU make, GNU Fortran, GNU gcc, Intel OneApi and Xlib (libX11) or compatible XQuartz X.Org are installed on your system, run the following commands from your command line:
git clone https://github.com/IAEA-NDS/PREPRO.git
cd PREPRO/source
make
make install
make clean
If successful, the executables will be available in PREPRO/bin.
make install graphics=yes
make clean
Will also install the graphics packages that requires X11 in /usr for Linux or /opt for MacOS
Verify the installation by changing into the directory test.
There run the command
./verify.sh
At the very end of the execution, you will see the plots by COMPLOT comparing the result of PREPRO 2015 and PREPRO 2021. The difference between these versions should not exceed 2%, i.e., the plotted ratio should be between 0.98 and 1.02.
Finally, after successful verification, move the executables to
a place of your liking. Under Linux /usr/local/bin is usually
a good place.
activate code will clash with the activate command available in the environment. You can check which activate program you are running by inspecting the full path:
which activate
If you run into this problem, the solution is to call the PREPRO code activate using it's full path, or to update the $PATH in your .bashrc script to ensure that the path containing the PREPRO executables is called before the path where the activate environment script is.
Singularity is a containerisation application similar to Docker. If Singularity is installed, you can run the following instructions for installation:
git clone https://github.com/IAEA-NDS/PREPRO.git
cd PREPRO
singularity build --fakeroot prepro.sif singularity_PREPRO.def
# alternatively:
# sudo singularity build prepro.sif singularity_PREPRO.def
The same verification script as described above in the convential installation can be used to verify the proper working:
singularity run prepro.sif test
The PREPRO codes can be exetued by
singularity run prepro.sif <PREPRO-CODE>
For instance, <PREPRO-CODE> could be endf2c or fixup.
The PREPRO 2021 codes can also be found here on the IAEA-NDS website. In particular, these resources are provided:
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS OR IAEA BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.