Skip to content
This repository has been archived by the owner on Feb 4, 2023. It is now read-only.
/ WiFiMulti_Generic Public archive

Simple MultiWiFi library to adapt ESP32/ESP8266 MultiWiFi of WiFi libraries to all other WiFi modules and libraries. Currently supporting ESP32, ESP8266, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano-RP2040-Connect, RASPBERRY_PI_PICO, RASPBERRY_PI_PICO_W, etc.) boards using WiFi, such as WiFiNINA, WiFi101, CYW43…

License

GPL-3.0 license
10 stars 3 forks Branches Tags Activity
Star
Notifications You must be signed in to change notification settings

khoih-prog/WiFiMulti_Generic

BranchesTags

Repository files navigation

WiFiMulti_Generic Library

arduino-library-badge GitHub release contributions welcome GitHub issues

Donate to my libraries using BuyMeACoffee

Table of Contents

Why do we need this WiFiMulti_Generic library

Features

This WiFiMulti_Generic library is a simple MultiWiFi library to adapt ESP32/ESP8266 MultiWiFi feature of WiFi libraries to all other WiFi modules and libraries. The functions are similar and compatible to those of ESP32 MultiWiFi and ESP8266 MultiWiFi libraries to make life much easier to port sketches from ESP8266/ESP32.

Currently Supported Boards

This WiFiMulti_Generic library currently supports these following boards:

  1. SAM DUE

  2. SAMD21

  • Arduino: ZERO, MKR, NANO_33_IOT, etc.
  • Adafruit SAMD21 (M0) : ItsyBitsy M0, Feather M0, Feather M0 Express, Metro M0 Express, Circuit Playground Express, Trinket M0, PIRkey, HalloWing M0, Crickit M0, etc.
  • Seeeduino: LoRaWAN, Zero, Femto M0, XIAO M0, Wio GPS Board, etc.
  1. SAMD51
  • Adafruit SAMD51 (M4) : Metro M4, Grand Central M4, ItsyBitsy M4, Feather M44 Express, Trellis M4, Metro M4 AirLift lite, MONSTER M4SK Express, Hallowing EM4 xpress, etc.
  • Seeeduino: Wio Terminal, Grove UI Wireless

  1. Teensy (4.1, 4.0, 3.6, 3.5, 3,2, 3.1, 3.0, LC)

  2. All STM32F/L/H/G/WB/MP1 with more than 32KB flash memory using stm32duino Arduino_Core_STM32

  3. AVR Mega1280, 2560, ADK, 32U4, 16U4, etc. using Arduino, Adafruit or Sparkfun core. To use patch for ArduinoSTL library. New

  4. RP2040-based boards, such as Nano RP2040 Connect, or RASPBERRY_PI_PICO_W with CYW43439 WiFi, using Arduino-mbed RP2040 core or Earle Philhower's arduino-pico core

  5. RP2040-based boards, such as RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040, using Arduino-mbed RP2040 core or Earle Philhower's arduino-pico core.

  6. ESP32

  • ESP32 boards, such as ESP32_DEV, etc.
  • ESP32S2-based boards, such as ESP32S2_DEV, ESP32_S2 Saola, etc.
  • ESP32C3-based boards, such as ESP32C3_DEV, etc.
  • ESP32_S3 (ESP32S3_DEV, ESP32_S3_BOX, UM TINYS3, UM PROS3, UM FEATHERS3, etc.)

  1. ESP8266

  2. Portenta_H7 New

  3. nRF52 boards, such as AdaFruit Feather nRF52832, nRF52840 Express, BlueFruit Sense, Itsy-Bitsy nRF52840 Express, Metro nRF52840 Express, NINA_B302_ublox, NINA_B112_ublox, etc.

  4. Arduino megaAVR boards using Arduino core

  • UNO WiFi Rev2 : WiFi101 New
  • Nano Every : WiFiEspAT New
  1. CO2 Ampel
  • SAMD : WiFi101 New

  1. STM32 using STM32duino Maple core. New

  2. Sparkfun SAMD

  • SAMD21, SAMD51 : WiFiEspAT New
  1. Industruino SAMD
  • D21G : WiFiEspAT New
  1. Tlera Corp STM32WB boards
  • Firefly-WB55RG, Nucleo-WB55RG, etc. : WiFiEspAT New
  1. Maixduino boards
  • Sipeed Maixduino, etc. : WiFiEspAT New

  1. RTL8720DN using Realtek AmebaD core New

  2. Arduino, Sparkfun, Adafruit, etc. AVR boards (Mega, 32U4, etc.). To use patch for ArduinoSTL library New

  • Arduino Uno / Mega / Duemilanove / Diecimila / LilyPad / Mini / Fio / Nano, etc.
  • Arduino ATMega 16U4, 32U4 such as AVR Leonardo, Leonardo ETH, YUN, Esplora, LILYPAD_USB, AVR_ROBOT_CONTROL, AVR_ROBOT_MOTOR, AVR_INDUSTRIAL101, etc.
  • Adafruit ATMega 32U4 such as AVR_FLORA8, AVR_FEATHER32U4, AVR_CIRCUITPLAY, AVR_ITSYBITSY32U4_5V, AVR_ITSYBITSY32U4_3V, AVR_BLUEFRUITMICRO, AVR_ADAFRUIT32U4, etc.
  • Adafruit ATMega 328(P) such as AVR_METRO, AVR_FEATHER328P, AVR_PROTRINKET5, AVR_PROTRINKET3, AVR_PROTRINKET5FTDI, AVR_PROTRINKET3FTDI, etc.
  • Generic or Sparkfun AVR ATmega_32U4 such as AVR_MAKEYMAKEY, AVR_PROMICRO, etc.
  • Generic or Sparkfun AVR ATmega_328(P) such as ARDUINO_REDBOT, ARDUINO_AVR_DIGITAL_SANDBOX, etc.
  • Generic or Sparkfun AVR ATmega128RFA1 such as ATMEGA128RFA1_DEV_BOARD, etc.

Currently supported WiFi shields/modules

  1. WiFiNINA using WiFiNINA_Generic library
  2. WiFi101 using WiFi101_Generic library New
  3. u-blox W101, W102 using WiFiNINA_Generic library
  4. ESP8266-AT command using WiFiEspAT library
  5. ESP8266/ESP32-AT command using ESP_AT_Lib library
  6. Built-in WiFi of ESP32, ESP8266
  7. Built-in WiFi of Portenta_H7 New
  8. Built-in CYW43439 WiFi of RASPBERRY_PI_PICO_W New

Prerequisites

  1. Arduino IDE 1.8.19+ for Arduino. GitHub release
  2. ESP32 Core 2.0.5+ for ESP32-based boards. Latest release
  3. ESP8266 Core 3.0.2+ for ESP8266-based boards. Latest release.
  4. Arduino AVR core 1.8.6+ for Arduino (Use Arduino Board Manager) for AVR boards. GitHub release New
  5. Adafruit AVR core 1.4.15+ for Adafruit AVR boards. Use Arduino Board Manager to install. GitHub release New
  6. Sparkfun AVR core 1.1.13+ for Sparkfun AVR boards. Use Arduino Board Manager to install. New
  7. Teensy core v1.57+ for Teensy (4.1, 4.0, 3.6, 3.5, 3,2, 3.1, 3.0) boards.
  8. Arduino SAM DUE core v1.6.12+ for SAM DUE ARM Cortex-M3 boards.
  9. Arduino SAMD core 1.8.13+ for SAMD ARM Cortex-M0+ boards. GitHub release
  10. Adafruit SAMD core 1.7.11+ for SAMD ARM Cortex-M0+ and M4 boards (Nano 33 IoT, etc.). GitHub release
  11. Seeeduino SAMD core 1.8.3+ for SAMD21/SAMD51 boards (XIAO M0, Wio Terminal, etc.). Latest release
  12. Adafruit nRF52 v1.3.0+ for nRF52 boards such as Adafruit NRF52840_FEATHER, NRF52832_FEATHER, NRF52840_FEATHER_SENSE, NRF52840_ITSYBITSY, NRF52840_CIRCUITPLAY, NRF52840_CLUE, NRF52840_METRO, NRF52840_PCA10056, PARTICLE_XENON, NINA_B302_ublox, etc. GitHub release
  13. Arduino Core for STM32 v2.3.0+ for STM32F/L/H/G/WB/MP1 boards. GitHub release
  14. Earle Philhower's arduino-pico core v2.6.3+ for RP2040-based boards such as RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040, etc. GitHub release
  15. ArduinoCore-mbed mbed_rp2040, mbed_nano, mbed_portenta core 3.4.1+ for Arduino (Use Arduino Board Manager) Portenta_H7, RP2040-based boards, such as Nano_RP2040_Connect, RASPBERRY_PI_PICO. GitHub release
  16. Arduino megaAVR core 1.8.7+ for Arduino megaAVR boards such as Arduino UNO WiFi Rev2, AVR_NANO_EVERY, etc.
  17. STM32 Arduino_STM32 core 1.0.0+ for STM32F boards. GitHub release. New
  18. MegaCoreX megaAVR core 1.1.0+ for Arduino megaAVR boards. GitHub release. Follow How to install. Not yet
  19. Functional-Vlpp library v1.0.2+ to use server's lambda function. To install. check arduino-library-badge
  20. WiFiNINA_Generic library v1.8.15-1+ if using WiFiNINA. To install. check arduino-library-badge.
  21. WiFi101_Generic Library v1.0.0+ to use SAMD MKR1000, etc. boards with WiFi101 to send large data. To install. check arduino-library-badge.
  22. WiFiEspAT library v1.4.1+ if using ESP8288/ESP32-AT shields. GitHub release
  23. ArduinoSTL library v1.3.3+ if using AVR boards. GitHub release
  24. ESP_AT_Lib library v1.4.1+ if using ESP8288/ESP32-AT shields. To install, check arduino-library-badge.

Installation

Use Arduino Library Manager

The best and easiest way is to use Arduino Library Manager. Search for WiFiMulti_Generic, then select / install the latest version. You can also use this link arduino-library-badge for more detailed instructions.

Manual Install

  1. Navigate to WiFiMulti_Generic page.
  2. Download the latest release WiFiMulti_Generic-main.zip.
  3. Extract the zip file to WiFiMulti_Generic-main directory
  4. Copy the whole WiFiMulti_Generic-main folder to Arduino libraries' directory such as ~/Arduino/libraries/.

VS Code & PlatformIO:

  1. Install VS Code
  2. Install PlatformIO
  3. Install WiFiMulti_Generic library by using Library Manager. Search for WiFiMulti_Generic in Platform.io Author's Libraries
  4. Use included platformio.ini file from examples to ensure that all dependent libraries will installed automatically. Please visit documentation for the other options and examples at Project Configuration File

Packages' Patches

1. For Adafruit nRF52840 and nRF52832 boards

To be able to compile, run and automatically detect and display BOARD_NAME on nRF52840/nRF52832 boards, you have to copy the whole nRF52 Packages_Patches directory into Adafruit nRF52 directory (~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0).

Supposing the Adafruit nRF52 version is 1.3.0. These files must be copied into the directory:

  • ~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/platform.txt
  • ~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/boards.txt
  • ~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/cores/nRF5/Udp.h
  • ~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/cores/nRF5/Print.h
  • ~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/cores/nRF5/Print.cpp
  • ~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/variants/NINA_B302_ublox/variant.h
  • ~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/variants/NINA_B302_ublox/variant.cpp
  • ~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/variants/NINA_B112_ublox/variant.h
  • ~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/variants/NINA_B112_ublox/variant.cpp
  • ~/.arduino15/packages/adafruit/hardware/nrf52/1.3.0/cores/nRF5/Udp.h

Whenever a new version is installed, remember to copy these files into the new version directory. For example, new version is x.yy.z These files must be copied into the directory:

  • ~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/platform.txt
  • ~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/boards.txt
  • ~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/cores/nRF5/Udp.h
  • ~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/cores/nRF5/Print.h
  • ~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/cores/nRF5/Print.cpp
  • ~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B302_ublox/variant.h
  • ~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B302_ublox/variant.cpp
  • ~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B112_ublox/variant.h
  • ~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B112_ublox/variant.cpp
  • ~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/cores/nRF5/Udp.h

2. For Teensy boards

To be able to compile and run on Teensy boards, you have to copy the files in Packages_Patches for Teensy directory into Teensy hardware directory (./arduino-1.8.19/hardware/teensy/avr/boards.txt).

Supposing the Arduino version is 1.8.19. These files must be copied into the directory:

  • ./arduino-1.8.19/hardware/teensy/avr/boards.txt
  • ./arduino-1.8.19/hardware/teensy/avr/cores/teensy/Stream.h
  • ./arduino-1.8.19/hardware/teensy/avr/cores/teensy3/Stream.h
  • ./arduino-1.8.19/hardware/teensy/avr/cores/teensy4/Stream.h

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz These files must be copied into the directory:

  • ./arduino-x.yy.zz/hardware/teensy/avr/boards.txt
  • ./arduino-x.yy.zz/hardware/teensy/avr/cores/teensy/Stream.h
  • ./arduino-x.yy.zz/hardware/teensy/avr/cores/teensy3/Stream.h
  • ./arduino-x.yy.zz/hardware/teensy/avr/cores/teensy4/Stream.h

3. For Arduino SAM DUE boards

To be able to compile and run on SAM DUE boards, you have to copy the whole SAM DUE directory into Arduino sam directory (~/.arduino15/packages/arduino/hardware/sam/1.6.12).

Supposing the Arduino SAM core version is 1.6.12. This file must be copied into the directory:

  • ~/.arduino15/packages/arduino/hardware/sam/1.6.12/platform.txt

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory:

  • ~/.arduino15/packages/arduino/hardware/sam/x.yy.zz/platform.txt

4. For Arduino SAMD boards

To be able to compile, run and automatically detect and display BOARD_NAME on Arduino SAMD (Nano-33-IoT, etc) boards, you have to copy the whole Arduino SAMD Packages_Patches directory into Arduino SAMD directory (~/.arduino15/packages/arduino/hardware/samd/1.8.13).

For core version v1.8.10+

Supposing the Arduino SAMD version is 1.8.13. Now only one file must be copied into the directory:

  • ~/.arduino15/packages/arduino/hardware/samd/1.8.13/platform.txt

Whenever a new version is installed, remember to copy this files into the new version directory. For example, new version is x.yy.zz

This file must be copied into the directory:

  • ~/.arduino15/packages/arduino/hardware/samd/x.yy.zz/platform.txt

For core version v1.8.9-

Supposing the Arduino SAMD version is 1.8.9. These files must be copied into the directory:

  • ~/.arduino15/packages/arduino/hardware/samd/1.8.9/platform.txt
  • ~/.arduino15/packages/arduino/hardware/samd/1.8.9/cores/arduino/Arduino.h

Whenever a new version is installed, remember to copy these files into the new version directory. For example, new version is x.yy.z

These files must be copied into the directory:

  • ~/.arduino15/packages/arduino/hardware/samd/x.yy.z/platform.txt
  • ~/.arduino15/packages/arduino/hardware/samd/x.yy.z/cores/arduino/Arduino.h

This is mandatory to fix the notorious Arduino SAMD compiler error. See Improve Arduino compatibility with the STL (min and max macro)

 ...\arm-none-eabi\include\c++\7.2.1\bits\stl_algobase.h:243:56: error: macro "min" passed 3 arguments, but takes just 2
     min(const _Tp& __a, const _Tp& __b, _Compare __comp)

Whenever the above-mentioned compiler error issue is fixed with the new Arduino SAMD release, you don't need to copy the Arduino.h file anymore.

5. For Adafruit SAMD boards

To be able to compile, run and automatically detect and display BOARD_NAME on Adafruit SAMD (Itsy-Bitsy M4, etc) boards, you have to copy the whole Adafruit SAMD Packages_Patches directory into Adafruit samd directory (~/.arduino15/packages/adafruit/hardware/samd/1.7.11).

Supposing the Adafruit SAMD core version is 1.7.11. These files must be copied into the directory:

  • ~/.arduino15/packages/adafruit/hardware/samd/1.7.11/platform.txt
  • ~/.arduino15/packages/adafruit/hardware/samd/1.7.11/cores/arduino/Print.h
  • ~/.arduino15/packages/adafruit/hardware/samd/1.7.11/cores/arduino/Print.cpp

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz These files must be copied into the directory:

  • ~/.arduino15/packages/adafruit/hardware/samd/x.yy.zz/platform.txt
  • ~/.arduino15/packages/adafruit/hardware/samd/x.yy.zz/cores/arduino/Print.h
  • ~/.arduino15/packages/adafruit/hardware/samd/x.yy.zz/cores/arduino/Print.cpp

6. For Seeeduino SAMD boards

To be able to compile, run and automatically detect and display BOARD_NAME on Seeeduino SAMD (XIAO M0, Wio Terminal, etc) boards, you have to copy the whole Seeeduino SAMD Packages_Patches directory into Seeeduino samd directory (~/.arduino15/packages/Seeeduino/hardware/samd/1.8.3).

Supposing the Seeeduino SAMD core version is 1.8.3. These files must be copied into the directory:

  • ~/.arduino15/packages/Seeeduino/hardware/samd/1.8.3/platform.txt
  • ~/.arduino15/packages/Seeeduino/hardware/samd/1.8.3/cores/arduino/Arduino.h
  • ~/.arduino15/packages/Seeeduino/hardware/samd/1.8.3/cores/arduino/Print.h
  • ~/.arduino15/packages/Seeeduino/hardware/samd/1.8.3/cores/arduino/Print.cpp

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz These files must be copied into the directory:

  • ~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/platform.txt
  • ~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/cores/arduino/Arduino.h
  • ~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/cores/arduino/Print.h
  • ~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/cores/arduino/Print.cpp

7. For STM32 boards

7.1 For STM32 boards to use LAN8720

For Generic STM32F4 series boards, such as STM32F407VE, using LAN8720, please use STM32 core v2.2.0 as breaking core v2.3.0 creates the compile error.

To use LAN8720 on some STM32 boards

  • Nucleo-144 (F429ZI, NUCLEO_F746NG, NUCLEO_F746ZG, NUCLEO_F756ZG)
  • Discovery (DISCO_F746NG)
  • STM32F4 boards (BLACK_F407VE, BLACK_F407VG, BLACK_F407ZE, BLACK_F407ZG, BLACK_F407VE_Mini, DIYMORE_F407VGT, FK407M1)

you have to copy the files stm32f4xx_hal_conf_default.h and stm32f7xx_hal_conf_default.h into STM32 stm32 directory (~/.arduino15/packages/STM32/hardware/stm32/2.2.0/system) to overwrite the old files.

Supposing the STM32 stm32 core version is 2.2.0. These files must be copied into the directory:

  • ~/.arduino15/packages/STM32/hardware/stm32/2.2.0/system/STM32F4xx/stm32f4xx_hal_conf_default.h for STM32F4.
  • ~/.arduino15/packages/STM32/hardware/stm32/2.2.0/system/STM32F7xx/stm32f7xx_hal_conf_default.h for Nucleo-144 STM32F7.

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz, these files must be copied into the corresponding directory:

  • ~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/system/STM32F4xx/stm32f4xx_hal_conf_default.h
  • `~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/system/STM32F7xx/stm32f7xx_hal_conf_default.h

7.2 For STM32 boards to use Serial1

To use Serial1 on some STM32 boards without Serial1 definition (Nucleo-144 NUCLEO_F767ZI, Nucleo-64 NUCLEO_L053R8, etc.) boards, you have to copy the files STM32 variant.h into STM32 stm32 directory (~/.arduino15/packages/STM32/hardware/stm32/2.3.0). You have to modify the files corresponding to your boards, this is just an illustration how to do.

Supposing the STM32 stm32 core version is 2.3.0. These files must be copied into the directory:

  • ~/.arduino15/packages/STM32/hardware/stm32/2.3.0/variants/STM32F7xx/F765Z(G-I)T_F767Z(G-I)T_F777ZIT/NUCLEO_F767ZI/variant.h for Nucleo-144 NUCLEO_F767ZI.
  • ~/.arduino15/packages/STM32/hardware/stm32/2.3.0/variants/STM32L0xx/L052R(6-8)T_L053R(6-8)T_L063R8T/NUCLEO_L053R8/variant.h for Nucleo-64 NUCLEO_L053R8.

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz, these files must be copied into the corresponding directory:

  • ~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/variants/STM32F7xx/F765Z(G-I)T_F767Z(G-I)T_F777ZIT/NUCLEO_F767ZI/variant.h
  • ~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/variants/STM32L0xx/L052R(6-8)T_L053R(6-8)T_L063R8T/NUCLEO_L053R8/variant.h

8. For RP2040-based boards using Earle Philhower arduino-pico core

8.1 To use BOARD_NAME

To be able to automatically detect and display BOARD_NAME on RP2040-based boards (RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040, GENERIC_RP2040, etc) boards, you have to copy the file RP2040 platform.txt into rp2040 directory (~/.arduino15/packages/rp2040/hardware/rp2040/1.4.0).

Supposing the rp2040 core version is 1.4.0. This file must be copied into the directory:

  • ~/.arduino15/packages/rp2040/hardware/rp2040/1.4.0/platform.txt

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory:

  • ~/.arduino15/packages/rp2040/hardware/rp2040/x.yy.zz/platform.txt

With core after v1.5.0, this step is not necessary anymore thanks to the PR Add -DBOARD_NAME="{build.board}" #136.

8.2 To avoid compile error relating to microsecondsToClockCycles

Some libraries, such as Adafruit DHT-sensor-library, require the definition of microsecondsToClockCycles(). To be able to compile and run on RP2040-based boards, you have to copy the files in RP2040 Arduino.h into rp2040 directory (~/.arduino15/packages/rp2040/hardware/rp2040/1.4.0).

Supposing the rp2040 core version is 1.4.0. This file must be copied to replace:

  • ~/.arduino15/packages/rp2040/hardware/rp2040/1.4.0/cores/rp2040/Arduino.h

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied to replace:

  • ~/.arduino15/packages/rp2040/hardware/rp2040/x.yy.zz/cores/rp2040/Arduino.h

With core after v1.5.0, this step is not necessary anymore thanks to the PR Add defs for compatibility #142.

9. For Portenta_H7 boards using Arduino IDE in Linux

To be able to upload firmware to Portenta_H7 using Arduino IDE in Linux (Ubuntu, etc.), you have to copy the file portenta_post_install.sh into mbed_portenta directory (~/.arduino15/packages/arduino/hardware/mbed_portenta/3.4.1/portenta_post_install.sh).

Then run the following command using sudo

$ cd ~/.arduino15/packages/arduino/hardware/mbed_portenta/3.4.1
$ chmod 755 portenta_post_install.sh
$ sudo ./portenta_post_install.sh

This will create the file /etc/udev/rules.d/49-portenta_h7.rules as follows:

# Portenta H7 bootloader mode UDEV rules

SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="035b", GROUP="plugdev", MODE="0666"

Supposing the ArduinoCore-mbed core version is 3.4.1. Now only one file must be copied into the directory:

  • ~/.arduino15/packages/arduino/hardware/mbed_portenta/3.4.1/portenta_post_install.sh

Whenever a new version is installed, remember to copy this files into the new version directory. For example, new version is x.yy.zz

This file must be copied into the directory:

  • ~/.arduino15/packages/arduino/hardware/mbed_portenta/x.yy.zz/portenta_post_install.sh

10. For RTL8720DN boards using AmebaD core

To avoid compile error relating to PROGMEM, you have to copy the file Realtek AmebaD core pgmspace.h into Realtek AmebaD directory (~/.arduino15/packages/realtek/hardware/AmebaD/3.1.4/cores/ambd/avr/pgmspace.h).

Supposing the Realtek AmebaD core version is 3.1.4. This file must be copied into the directory:

  • ~/.arduino15/packages/realtek/hardware/AmebaD/3.1.4/cores/ambd/avr/pgmspace.h

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory:

  • ~/.arduino15/packages/realtek/hardware/AmebaD/x.yy.zz/cores/ambd/avr/pgmspace.h

11. For SAMD21 and SAMD51 boards using ArduinoCore-fab-sam core

To avoid compile error relating to SAMD21/SAMD51, you have to copy the file ArduinoCore-fab-sam core pgmspace.h into ArduinoCore-fab-sam samd directory (~/.arduino15/packages/Fab_SAM_Arduino/hardware/samd/1.9.0/boards.txt).

Supposing the ArduinoCore-fab-sam samd core version is 1.9.0. This file must be copied into the directory:

  • ~/.arduino15/packages/Fab_SAM_Arduino/hardware/samd/1.9.0/boards.txt

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz This file must be copied into the directory:

  • ~/.arduino15/packages/Fab_SAM_Arduino/hardware/samd/x.yy.zz/boards.txt

12. For Seeeduino RP2040 boards

To be able to compile, run and automatically detect and display BOARD_NAME on Seeeduino RP2040 (XIAO RP2040, Wio RP2040 Mini) boards, you have to copy the whole Seeeduino RP2040 Packages_Patches directory into Seeeduino samd directory (~/.arduino15/packages/Seeeduino/hardware/rp2040/2.7.2).

Supposing the Seeeduino RP2040 core version is 2.7.2. These files must be copied into the directory:

  • ~/.arduino15/packages/Seeeduino/hardware/rp2040/2.7.2/boards.txt
  • ~/.arduino15/packages/Seeeduino/hardware/rp2040/2.7.2/variants/Seeed_XIAO_RP2040/pins_arduino.h

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz These files must be copied into the directory:

  • ~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/boards.txt
  • ~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/variants/Seeed_XIAO_RP2040/pins_arduino.h

13. For Seeeduino nRF52840 boards

To be able to compile and run on Xiao nRF52840 boards, you have to copy the whole nRF52 1.0.0 directory into Seeeduino nRF52 directory (~/.arduino15/packages/Seeeduino/hardware/nrf52/1.0.0).

Supposing the Seeeduino nRF52 version is 1.0.0. These files must be copied into the directory:

  • ~/.arduino15/packages/Seeeduino/hardware/nrf52/1.0.0/platform.txt
  • ~/.arduino15/packages/Seeeduino/hardware/nrf52/1.0.0/cores/nRF5/Print.h
  • ~/.arduino15/packages/Seeeduino/hardware/nrf52/1.0.0/cores/nRF5/Print.cpp
  • ~/.arduino15/packages/Seeeduino/hardware/nrf52/1.0.0/cores/nRF5/Udp.h

Whenever a new version is installed, remember to copy these files into the new version directory. For example, new version is x.yy.z These files must be copied into the directory:

  • ~/.arduino15/packages/Seeeduino/hardware/nrf52/x.yy.z/platform.txt
  • ~/.arduino15/packages/Seeeduino/hardware/nrf52/x.yy.z/cores/nRF5/Print.h
  • ~/.arduino15/packages/Seeeduino/hardware/nrf52/x.yy.z/cores/nRF5/Print.cpp
  • ~/.arduino15/packages/Seeeduino/hardware/nrf52/x.yy.z/cores/nRF5/Udp.h

Libraries' Patches

1. ArduinoSTL for AVR boards

To fix compile error for AVR boards, the Libraries' Patches for ArduinoSTL library must be used.

Just copy the following file into the ArduinoSTL library directory to overwrite the old files:

Examples:

  1. WiFiMulti
  2. WiFiMulti_RP2040W New

Example WiFiMulti

1. File WiFiMulti.ino

WiFiMulti_Generic/examples/WiFiMulti/WiFiMulti.ino

Lines 21 to 225 in 7969f1a

#include "defines.h"
WiFiMulti_Generic wifiMulti;
#if ( defined(ARDUINO_RASPBERRY_PI_PICO_W) )
bool isWiFiConnected()
{
// You can change longer or shorter depending on your network response
// Shorter => more responsive, but more ping traffic
static uint8_t theTTL = 10;
// Use ping() to test TCP connections
if (WiFi.ping(WiFi.gatewayIP(), theTTL) == theTTL)
{
return true;
}
return false;
}
#endif
void heartBeatPrint()
{
static int num = 1;
//WFM_LOGDEBUG1("\nWiFi connected, RSSI:", WiFi.RSSI());
if (WiFi.status() == WL_CONNECTED)
Serial.print(F("H")); // H means connected to WiFi
else
Serial.print(F("F")); // F means not connected to WiFi
if (num == 80)
{
Serial.println();
num = 1;
}
else if (num++ % 10 == 0)
{
Serial.print(F(" "));
}
}
uint8_t connectMultiWiFi()
{
#if defined(ESP32)
// For ESP32, this better be 0 to shorten the connect time.
// For ESP32-S2/C3, must be > 500
#if ( USING_ESP32_S2 || USING_ESP32_C3 )
#define WIFI_MULTI_1ST_CONNECT_WAITING_MS 500L
#else
// For ESP32 core v1.0.6, must be >= 500
#define WIFI_MULTI_1ST_CONNECT_WAITING_MS 800L
#endif
#elif (defined(ESP8266))
// For ESP8266, this better be 2200 to enable connect the 1st time
#define WIFI_MULTI_1ST_CONNECT_WAITING_MS 2200L
#else
// For general board, this better be 1000 to enable connect the 1st time
#define WIFI_MULTI_1ST_CONNECT_WAITING_MS 1000L
#endif
#define WIFI_MULTI_CONNECT_WAITING_MS 500L
Serial.println("WiFi lost. Trying to scan and reconnect");
WiFi.disconnect();
int i = 0;
uint8_t status = wifiMulti.run();
delay(WIFI_MULTI_1ST_CONNECT_WAITING_MS);
while ( ( i++ < 20 ) && ( status != WL_CONNECTED ) )
{
status = WiFi.status();
if ( status == WL_CONNECTED )
break;
else
delay(WIFI_MULTI_CONNECT_WAITING_MS);
}
if ( status == WL_CONNECTED )
{
WFM_LOGERROR1(F("WiFi connected after time: "), i);
WFM_LOGERROR3(F("SSID:"), WiFi.SSID(), F(",RSSI="), WiFi.RSSI());
#if (defined(ESP32) || defined(ESP8266))
WFM_LOGERROR3(F("Channel:"), WiFi.channel(), F(",IP address:"), WiFi.localIP() );
#else
WFM_LOGERROR1(F("IP address:"), WiFi.localIP() );
#endif
}
else
{
WFM_LOGERROR(F("WiFi not connected"));
if (wifiMulti.run() != WL_CONNECTED)
{
Serial.println("WiFi not connected!");
delay(1000);
}
}
return status;
}
void check_WiFi()
{
#if ( defined(ARDUINO_PORTENTA_H7_M7) || defined(ARDUINO_PORTENTA_H7_M4) )
// Workaround for bug in https://github.com/arduino/ArduinoCore-mbed/issues/381
if ( (WiFi.status() != WL_CONNECTED) || (WiFi.RSSI() == 0) )
#elif ( defined(ARDUINO_RASPBERRY_PI_PICO_W) )
if (!isWiFiConnected())
#else
if ( (WiFi.status() != WL_CONNECTED) )
#endif
{
Serial.println(F("\nWiFi lost. Call connectMultiWiFi in loop"));
connectMultiWiFi();
}
}
void check_status()
{
static uint32_t checkstatus_timeout = 0;
static uint32_t checkwifi_timeout = 0;
static uint32_t current_millis;
#if ( defined(ARDUINO_RASPBERRY_PI_PICO_W) )
// You can change longer or shorter depending on your network response
// Shorter => more responsive, but more ping traffic
#define WIFICHECK_INTERVAL 1000L
#else
#define WIFICHECK_INTERVAL 1000L
#endif
#define HEARTBEAT_INTERVAL 10000L
current_millis = millis();
// Check WiFi every WIFICHECK_INTERVAL (1) seconds.
if ((current_millis > checkwifi_timeout) || (checkwifi_timeout == 0))
{
check_WiFi();
checkwifi_timeout = current_millis + WIFICHECK_INTERVAL;
}
// Print hearbeat every HEARTBEAT_INTERVAL (10) seconds.
if ((current_millis > checkstatus_timeout) || (checkstatus_timeout == 0))
{
heartBeatPrint();
checkstatus_timeout = current_millis + HEARTBEAT_INTERVAL;
}
// Important delay() for RTL8720DN
delay(200);
}
void setup()
{
Serial.begin(115200);
while (!Serial && millis() < 5000);
Serial.print(F("\nStarting WiFiMulti on "));
Serial.println(BOARD_NAME);
Serial.println(WIFIMULTI_GENERIC_VERSION);
#if WIFI_USING_ESP_AT
// initialize serial for ESP module
EspSerial.begin(115200);
// initialize ESP module
WiFi.init(&EspSerial);
Serial.println(F("WiFi shield init done"));
#endif
wifiMulti.addAP(your_ssid, your_pass);
wifiMulti.addAP(your_ssid1, your_pass1);
wifiMulti.addAP("ssid_from_AP_1", "your_password_for_AP_1");
wifiMulti.addAP("ssid_from_AP_2", "your_password_for_AP_2");
wifiMulti.addAP("ssid_from_AP_3", "your_password_for_AP_3");
Serial.println("Connecting WiFi...");
if (wifiMulti.run() == WL_CONNECTED)
{
Serial.print("\nWiFi connected, SSID: ");
Serial.print(WiFi.SSID());
Serial.print(", IP address: ");
Serial.println(WiFi.localIP());
}
}
void loop()
{
check_status();
}

2. File defines.h

WiFiMulti_Generic/examples/WiFiMulti/defines.h

Lines 1 to 531 in 7969f1a

/****************************************************************************************************************************
defines.h
For any WiFi shields, such as ESP32, ESP8266, Portenta_H7, WiFiNINA W101, W102, W13x, or custom, such as ESP8266/ESP32-AT, etc
WiFiMulti_Generic is a library to adapt the ESP32/ESP8266 WiFiMulti feature to other WiFi modules
Based on and modified from WiFiMulti of ESP32 core: https://github.com/espressif/arduino-esp32
Based on and modified from WiFiMulti of ESP8266 core: https://github.com/esp8266/Arduino
Built by Khoi Hoang https://github.com/khoih-prog/WiFiMulti_Generic
License under GPL-3.0
***************************************************************************************************************************************/
#ifndef defines_h
#define defines_h
#define DEBUG_WIFI_MULTI_GENERIC_PORT Serial
// Debug Level from 0 to 4
#define _WIFIMULTI_LOGLEVEL_ 3
#define _WIFI_LOGLEVEL_ 1
#define _WIFININA_LOGLEVEL_ 3
#if ( defined(ARDUINO_PORTENTA_H7_M7) || defined(ARDUINO_PORTENTA_H7_M4) )
#if defined(BOARD_NAME)
#undef BOARD_NAME
#endif
#if defined(CORE_CM7)
#warning Using Portenta H7 M7 core
#define BOARD_NAME "PORTENTA_H7_M7"
#else
#warning Using Portenta H7 M4 core
#define BOARD_NAME "PORTENTA_H7_M4"
#endif
#define USE_WIFI_PORTENTA_H7 true
#define USE_WIFI_NINA false
// To use the default WiFi library here
#define USE_WIFI_CUSTOM false
#elif defined(ESP32)
#define USE_WIFI_NINA false
// To use the default WiFi library here
#define USE_WIFI_CUSTOM false
#elif (defined(ESP8266))
#define USE_WIFI_NINA false
// To use the default WiFi library here
#define USE_WIFI_CUSTOM true
#elif ( defined(ARDUINO_SAMD_MKR1000) || defined(ARDUINO_SAMD_MKRWIFI1010) )
#define USE_WIFI_NINA false
#define USE_WIFI101 true
#define USE_WIFI_CUSTOM false
#elif ( defined(ARDUINO_NANO_RP2040_CONNECT) || defined(ARDUINO_SAMD_NANO_33_IOT) )
#define USE_WIFI_NINA true
#define USE_WIFI101 false
#define USE_WIFI_CUSTOM false
#elif defined(ARDUINO_RASPBERRY_PI_PICO_W)
#define USE_WIFI_NINA false
#define USE_WIFI101 false
#define USE_WIFI_CUSTOM false
#elif ( defined(ARDUINO_AVR_UNO_WIFI_REV2) || defined(ARDUINO_AVR_NANO_EVERY) )
#if defined(ARDUINO_AVR_UNO_WIFI_REV2)
#define USE_WIFI_NINA false
#define USE_WIFI101 true
#define USE_WIFI_CUSTOM false
#elif ( defined(__AVR_ATmega4809__) || defined(ARDUINO_AVR_UNO_WIFI_REV2) || defined(ARDUINO_AVR_NANO_EVERY) || \
defined(ARDUINO_AVR_ATmega4809) || defined(ARDUINO_AVR_ATmega4808) || defined(ARDUINO_AVR_ATmega3209) || \
defined(ARDUINO_AVR_ATmega3208) || defined(ARDUINO_AVR_ATmega1609) || defined(ARDUINO_AVR_ATmega1608) || \
defined(ARDUINO_AVR_ATmega809) || defined(ARDUINO_AVR_ATmega808) )
#define USE_WIFI_NINA false
#define USE_WIFI101 false
#define USE_WIFI_CUSTOM true
#else
#define USE_WIFI_NINA false
#define USE_WIFI101 false
#define USE_WIFI_CUSTOM true
#endif
#elif defined(CONFIG_PLATFORM_8721D)
//#error Ameba Realtek RTL8720DN, RTL8722DM and RTM8722CSM not supported yet
#define USE_WIFI_NINA false
#define USE_WIFI101 false
#define USE_WIFI_CUSTOM true
#else
#define USE_WIFI_NINA false
#define USE_WIFI101 false
// If not USE_WIFI_NINA, you can USE_WIFI_CUSTOM, then include the custom WiFi library here
#define USE_WIFI_CUSTOM true
#endif
#define WIFI_USING_ESP8266_AT_WEBSERVER false
#if (!USE_WIFI_NINA && USE_WIFI_CUSTOM)
#if (defined(ESP8266))
#include "ESP8266WiFi.h"
#elif WIFI_USING_ESP8266_AT_WEBSERVER
#warning WIFI_USING_ESP8266_AT_WEBSERVER
#error WIFI_USING_ESP8266_AT_WEBSERVER not ready yet
#include "ESP8266_AT_WebServer.h"
#define WIFI_USING_ESP_AT true
#elif defined(CONFIG_PLATFORM_8721D)
#include "WiFi.h"
#define WIFI_USING_ESP_AT false
#else
#warning WIFI_USING_WIFIESPAT
//#include "WiFi_XYZ.h"
#include "WiFiEspAT.h"
#define WIFI_USING_ESP_AT true
#endif
#endif
#if WIFI_USING_ESP_AT
#if defined(Serial1)
#define EspSerial Serial1
#else
#define EspSerial Serial
#endif
#endif
#if defined(USE_WIFI_PORTENTA_H7) && USE_WIFI_PORTENTA_H7
#warning Using Portenta H7 WiFi
#define SHIELD_TYPE "Portenta_H7 WiFi"
#elif USE_WIFI_NINA
#warning Using WiFiNINA using WiFiNINA_Generic Library
#define SHIELD_TYPE "WiFiNINA using WiFiNINA_Generic Library"
#elif USE_WIFI101
#warning Using WiFi101 using WiFi101 Library
#define SHIELD_TYPE "WiFi101 using WiFi101 Library"
#elif (defined(ESP32) || defined(ESP8266))
#warning Using ESP WiFi with WiFi Library
#define SHIELD_TYPE "ESP WiFi using WiFi Library"
#elif USE_WIFI_CUSTOM
#warning Using Custom WiFi using Custom WiFi Library
#define SHIELD_TYPE "Custom WiFi using Custom WiFi Library"
#else
#define SHIELD_TYPE "Unknown WiFi shield/Library"
#endif
#if ( defined(NRF52840_FEATHER) || defined(NRF52832_FEATHER) || defined(NRF52_SERIES) || defined(ARDUINO_NRF52_ADAFRUIT) || \
defined(NRF52840_FEATHER_SENSE) || defined(NRF52840_ITSYBITSY) || defined(NRF52840_CIRCUITPLAY) || defined(NRF52840_CLUE) || \
defined(NRF52840_METRO) || defined(NRF52840_PCA10056) || defined(PARTICLE_XENON) || defined(NINA_B302_ublox) || defined(NINA_B112_ublox) )
#if defined(WIFI_USE_NRF528XX)
#undef WIFI_USE_NRF528XX
#endif
#define WIFI_USE_NRF528XX true
#endif
#if ( defined(ARDUINO_SAMD_ZERO) || defined(ARDUINO_SAMD_MKR1000) || defined(ARDUINO_SAMD_MKRWIFI1010) \
|| defined(ARDUINO_SAMD_NANO_33_IOT) || defined(ARDUINO_SAMD_MKRFox1200) || defined(ARDUINO_SAMD_MKRWAN1300) || defined(ARDUINO_SAMD_MKRWAN1310) \
|| defined(ARDUINO_SAMD_MKRGSM1400) || defined(ARDUINO_SAMD_MKRNB1500) || defined(ARDUINO_SAMD_MKRVIDOR4000) || defined(__SAMD21G18A__) \
|| defined(ARDUINO_SAMD_CIRCUITPLAYGROUND_EXPRESS) || defined(__SAMD21E18A__) || defined(__SAMD51__) || defined(__SAMD51J20A__) || defined(__SAMD51J19A__) \
|| defined(__SAMD51G19A__) || defined(__SAMD51P19A__) || defined(__SAMD21G18A__) )
#if defined(WIFI_USE_SAMD)
#undef WIFI_USE_SAMD
#endif
#define WIFI_USE_SAMD true
#endif
#if ( defined(ARDUINO_SAM_DUE) || defined(__SAM3X8E__) )
#if defined(WIFI_USE_SAM_DUE)
#undef WIFI_USE_SAM_DUE
#endif
#define WIFI_USE_SAM_DUE true
#warning Use SAM_DUE architecture
#endif
#if ( defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) ||defined(STM32F4) || defined(STM32F7) || \
defined(STM32L0) || defined(STM32L1) || defined(STM32L4) || defined(STM32H7) ||defined(STM32G0) || defined(STM32G4) || \
defined(STM32WB) || defined(STM32MP1) ) && ! ( defined(ARDUINO_PORTENTA_H7_M7) || defined(ARDUINO_PORTENTA_H7_M4) )
#if defined(WIFI_USE_STM32)
#undef WIFI_USE_STM32
#endif
#define WIFI_USE_STM32 true
#endif
#if ( defined(ARDUINO_NANO_RP2040_CONNECT) || defined(ARDUINO_ARCH_RP2040) || defined(ARDUINO_RASPBERRY_PI_PICO) || \
defined(ARDUINO_ADAFRUIT_FEATHER_RP2040) || defined(ARDUINO_GENERIC_RP2040) || defined(ARDUINO_RASPBERRY_PI_PICO_W) )
#if defined(WIFI_USE_RP2040)
#undef WIFI_USE_RP2040
#endif
#define WIFI_USE_RP2040 true
#endif
#if ( defined(ARDUINO_AVR_ADK) || defined(ARDUINO_AVR_MEGA) || defined(ARDUINO_AVR_MEGA2560) )
#if defined(WIFI_USE_AVR)
#undef WIFI_USE_AVR
#endif
#define WIFI_USE_AVR true
#warning Use AVR Mega architecture from WiFiMulti_Generic
#endif
#ifdef CORE_TEENSY
#if defined(__IMXRT1062__)
// For Teensy 4.1/4.0
#define BOARD_TYPE "TEENSY 4.1/4.0"
#elif defined(__MK66FX1M0__)
#define BOARD_TYPE "Teensy 3.6"
#elif defined(__MK64FX512__)
#define BOARD_TYPE "Teensy 3.5"
#elif defined(__MKL26Z64__)
#define BOARD_TYPE "Teensy LC"
#elif defined(__MK20DX256__)
#define BOARD_TYPE "Teensy 3.2" // and Teensy 3.1 (obsolete)
#elif defined(__MK20DX128__)
#define BOARD_TYPE "Teensy 3.0"
#elif defined(__AVR_AT90USB1286__)
#error Teensy 2.0++ not supported yet
#elif defined(__AVR_ATmega32U4__)
#error Teensy 2.0 not supported yet
#else
// For Other Boards
#define BOARD_TYPE "Unknown Teensy Board"
#endif
#elif defined(WIFI_USE_NRF528XX)
#if defined(NRF52840_FEATHER)
#define BOARD_TYPE "NRF52840_FEATHER_EXPRESS"
#elif defined(NRF52832_FEATHER)
#define BOARD_TYPE "NRF52832_FEATHER"
#elif defined(NRF52840_FEATHER_SENSE)
#define BOARD_TYPE "NRF52840_FEATHER_SENSE"
#elif defined(NRF52840_ITSYBITSY)
#define BOARD_TYPE "NRF52840_ITSYBITSY_EXPRESS"
#elif defined(NRF52840_CIRCUITPLAY)
#define BOARD_TYPE "NRF52840_CIRCUIT_PLAYGROUND"
#elif defined(NRF52840_CLUE)
#define BOARD_TYPE "NRF52840_CLUE"
#elif defined(NRF52840_METRO)
#define BOARD_TYPE "NRF52840_METRO_EXPRESS"
#elif defined(NRF52840_PCA10056)
#define BOARD_TYPE "NORDIC_NRF52840DK"
#elif defined(NINA_B302_ublox)
#define BOARD_TYPE "NINA_B302_ublox"
#elif defined(NINA_B112_ublox)
#define BOARD_TYPE "NINA_B112_ublox"
#elif defined(PARTICLE_XENON)
#define BOARD_TYPE "PARTICLE_XENON"
#elif defined(MDBT50Q_RX)
#define BOARD_TYPE "RAYTAC_MDBT50Q_RX"
#elif defined(ARDUINO_NRF52_ADAFRUIT)
#define BOARD_TYPE "ARDUINO_NRF52_ADAFRUIT"
#else
#define BOARD_TYPE "nRF52 Unknown"
#endif
#elif defined(WIFI_USE_SAMD)
#if defined(ARDUINO_SAMD_ZERO)
#define BOARD_TYPE "SAMD Zero"
#elif defined(ARDUINO_SAMD_MKR1000)
#define BOARD_TYPE "SAMD MKR1000"
#elif defined(ARDUINO_SAMD_MKRWIFI1010)
#define BOARD_TYPE "SAMD MKRWIFI1010"
#elif defined(ARDUINO_SAMD_NANO_33_IOT)
#define BOARD_TYPE "SAMD NANO_33_IOT"
#elif defined(ARDUINO_SAMD_MKRFox1200)
#define BOARD_TYPE "SAMD MKRFox1200"
#elif ( defined(ARDUINO_SAMD_MKRWAN1300) || defined(ARDUINO_SAMD_MKRWAN1310) )
#define BOARD_TYPE "SAMD MKRWAN13X0"
#elif defined(ARDUINO_SAMD_MKRGSM1400)
#define BOARD_TYPE "SAMD MKRGSM1400"
#elif defined(ARDUINO_SAMD_MKRNB1500)
#define BOARD_TYPE "SAMD MKRNB1500"
#elif defined(ARDUINO_SAMD_MKRVIDOR4000)
#define BOARD_TYPE "SAMD MKRVIDOR4000"
#elif defined(ARDUINO_SAMD_CIRCUITPLAYGROUND_EXPRESS)
#define BOARD_TYPE "SAMD ARDUINO_SAMD_CIRCUITPLAYGROUND_EXPRESS"
#elif defined(ADAFRUIT_FEATHER_M0_EXPRESS)
#define BOARD_TYPE "SAMD21 ADAFRUIT_FEATHER_M0_EXPRESS"
#elif defined(ADAFRUIT_METRO_M0_EXPRESS)
#define BOARD_TYPE "SAMD21 ADAFRUIT_METRO_M0_EXPRESS"
#elif defined(ADAFRUIT_CIRCUITPLAYGROUND_M0)
#define BOARD_TYPE "SAMD21 ADAFRUIT_CIRCUITPLAYGROUND_M0"
#elif defined(ADAFRUIT_GEMMA_M0)
#define BOARD_TYPE "SAMD21 ADAFRUIT_GEMMA_M0"
#elif defined(ADAFRUIT_TRINKET_M0)
#define BOARD_TYPE "SAMD21 ADAFRUIT_TRINKET_M0"
#elif defined(ADAFRUIT_ITSYBITSY_M0)
#define BOARD_TYPE "SAMD21 ADAFRUIT_ITSYBITSY_M0"
#elif defined(ARDUINO_SAMD_HALLOWING_M0)
#define BOARD_TYPE "SAMD21 ARDUINO_SAMD_HALLOWING_M0"
#elif defined(ADAFRUIT_METRO_M4_EXPRESS)
#define BOARD_TYPE "SAMD51 ADAFRUIT_METRO_M4_EXPRESS"
#elif defined(ADAFRUIT_GRAND_CENTRAL_M4)
#define BOARD_TYPE "SAMD51 ADAFRUIT_GRAND_CENTRAL_M4"
#elif defined(ADAFRUIT_FEATHER_M4_EXPRESS)
#define BOARD_TYPE "SAMD51 ADAFRUIT_FEATHER_M4_EXPRESS"
#elif defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS)
#define BOARD_TYPE "SAMD51 ADAFRUIT_ITSYBITSY_M4_EXPRESS"
#elif defined(ADAFRUIT_TRELLIS_M4_EXPRESS)
#define BOARD_TYPE "SAMD51 ADAFRUIT_TRELLIS_M4_EXPRESS"
#elif defined(ADAFRUIT_PYPORTAL)
#define BOARD_TYPE "SAMD51 ADAFRUIT_PYPORTAL"
#elif defined(ADAFRUIT_PYPORTAL_M4_TITANO)
#define BOARD_TYPE "SAMD51 ADAFRUIT_PYPORTAL_M4_TITANO"
#elif defined(ADAFRUIT_PYBADGE_M4_EXPRESS)
#define BOARD_TYPE "SAMD51 ADAFRUIT_PYBADGE_M4_EXPRESS"
#elif defined(ADAFRUIT_METRO_M4_AIRLIFT_LITE)
#define BOARD_TYPE "SAMD51 ADAFRUIT_METRO_M4_AIRLIFT_LITE"
#elif defined(ADAFRUIT_PYGAMER_M4_EXPRESS)
#define BOARD_TYPE "SAMD51 ADAFRUIT_PYGAMER_M4_EXPRESS"
#elif defined(ADAFRUIT_PYGAMER_ADVANCE_M4_EXPRESS)
#define BOARD_TYPE "SAMD51 ADAFRUIT_PYGAMER_ADVANCE_M4_EXPRESS"
#elif defined(ADAFRUIT_PYBADGE_AIRLIFT_M4)
#define BOARD_TYPE "SAMD51 ADAFRUIT_PYBADGE_AIRLIFT_M4"
#elif defined(ADAFRUIT_MONSTER_M4SK_EXPRESS)
#define BOARD_TYPE "SAMD51 ADAFRUIT_MONSTER_M4SK_EXPRESS"
#elif defined(ADAFRUIT_HALLOWING_M4_EXPRESS)
#define BOARD_TYPE "SAMD51 ADAFRUIT_HALLOWING_M4_EXPRESS"
#elif defined(SEEED_WIO_TERMINAL)
#define BOARD_TYPE "SAMD SEEED_WIO_TERMINAL"
#elif defined(SEEED_FEMTO_M0)
#define BOARD_TYPE "SAMD SEEED_FEMTO_M0"
#elif defined(SEEED_XIAO_M0)
#define BOARD_TYPE "SAMD SEEED_XIAO_M0"
#elif defined(Wio_Lite_MG126)
#define BOARD_TYPE "SAMD SEEED Wio_Lite_MG126"
#elif defined(WIO_GPS_BOARD)
#define BOARD_TYPE "SAMD SEEED WIO_GPS_BOARD"
#elif defined(SEEEDUINO_ZERO)
#define BOARD_TYPE "SAMD SEEEDUINO_ZERO"
#elif defined(SEEEDUINO_LORAWAN)
#define BOARD_TYPE "SAMD SEEEDUINO_LORAWAN"
#elif defined(SEEED_GROVE_UI_WIRELESS)
#define BOARD_TYPE "SAMD SEEED_GROVE_UI_WIRELESS"
#elif defined(__SAMD21E18A__)
#define BOARD_TYPE "SAMD21E18A"
#elif defined(__SAMD21G18A__)
#define BOARD_TYPE "SAMD21G18A"
#elif defined(__SAMD51G19A__)
#define BOARD_TYPE "SAMD51G19A"
#elif defined(__SAMD51J19A__)
#define BOARD_TYPE "SAMD51J19A"
#elif defined(__SAMD51P19A__)
#define BOARD_TYPE "__SAMD51P19A__"
#elif defined(__SAMD51J20A__)
#define BOARD_TYPE "SAMD51J20A"
#elif defined(__SAM3X8E__)
#define BOARD_TYPE "SAM3X8E"
#elif defined(__CPU_ARC__)
#define BOARD_TYPE "CPU_ARC"
#elif defined(__SAMD51__)
#define BOARD_TYPE "SAMD51"
#else
#define BOARD_TYPE "SAMD Unknown"
#endif
#elif defined(WIFI_USE_STM32)
// For STM32
#warning EspSerial using SERIAL_PORT_HARDWARE, can be Serial or Serial1. See your board variant.h
#define EspSerial SERIAL_PORT_HARDWARE //Serial1
#if defined(STM32F0)
#warning STM32F0 board selected
#define BOARD_TYPE "STM32F0"
#elif defined(STM32F1)
#warning STM32F1 board selected
#define BOARD_TYPE "STM32F1"
#elif defined(STM32F2)
#warning STM32F2 board selected
#define BOARD_TYPE "STM32F2"
#elif defined(STM32F3)
#warning STM32F3 board selected
#define BOARD_TYPE "STM32F3"
#elif defined(STM32F4)
#warning STM32F4 board selected
#define BOARD_TYPE "STM32F4"
#elif defined(STM32F7)
#if defined(ARDUINO_NUCLEO_F767ZI)
#warning Nucleo-144 NUCLEO_F767ZI board selected, using HardwareSerial Serial1 @ pin D0/RX and D1/TX
// RX TX
HardwareSerial Serial1(D0, D1);
#else
#warning STM32F7 board selected
#define BOARD_TYPE "STM32F7"
#endif
#elif defined(STM32L0)
#if defined(ARDUINO_NUCLEO_L053R8)
#warning Nucleo-64 NUCLEO_L053R8 board selected, using HardwareSerial Serial1 @ pin D0/RX and D1/TX
// RX TX
HardwareSerial Serial1(D0, D1); // (PA3, PA2);
#else
#warning STM32L0 board selected
#define BOARD_TYPE "STM32L0"
#endif
#elif defined(STM32L1)
#warning STM32L1 board selected
#define BOARD_TYPE "STM32L1"
#elif defined(STM32L4)
#warning STM32L4 board selected
#define BOARD_TYPE "STM32L4"
#elif defined(STM32H7)
#warning STM32H7 board selected
#define BOARD_TYPE "STM32H7"
#elif defined(STM32G0)
#warning STM32G0 board selected
#define BOARD_TYPE "STM32G0"
#elif defined(STM32G4)
#warning STM32G4 board selected
#define BOARD_TYPE "STM32G4"
#elif defined(STM32WB)
#warning STM32WB board selected
#define BOARD_TYPE "STM32WB"
#elif defined(STM32MP1)
#warning STM32MP1 board selected
#define BOARD_TYPE "STM32MP1"
#else
#warning STM32 unknown board selected
#define BOARD_TYPE "STM32 Unknown"
#endif
#elif defined(BOARD_SIPEED_MAIX_DUINO)
#warning SIPEED_MAIX_DUINO board selected
#define BOARD_TYPE "BOARD_SIPEED_MAIX_DUINO"
#define EspSerial Serial1
#elif defined(ESP32)
#warning ESP32 board selected
#define BOARD_TYPE "ESP32"
#elif defined(ESP8266)
#warning ESP8266 board selected
#define BOARD_TYPE "ESP8266"
#elif defined(WIFI_USE_RP2040) && WIFI_USE_RP2040
#warning RP2040 board selected
#elif defined(WIFI_USE_SAM_DUE) && WIFI_USE_SAM_DUE
#warning SAM DUE board selected
#elif defined(CONFIG_PLATFORM_8721D)
#warning RTL8720DN board using AmebaD core selected
#define BOARD_TYPE "RTL8720DN"
#elif ( defined(ARDUINO_AVR_UNO_WIFI_REV2) || defined(ARDUINO_AVR_NANO_EVERY) )
#warning megaAVR board selected
#elif ( defined(__AVR_ATmega4809__) || \
defined(ARDUINO_AVR_ATmega4809) || defined(ARDUINO_AVR_ATmega4808) || defined(ARDUINO_AVR_ATmega3209) || \
defined(ARDUINO_AVR_ATmega3208) || defined(ARDUINO_AVR_ATmega1609) || defined(ARDUINO_AVR_ATmega1608) || \
defined(ARDUINO_AVR_ATmega809) || defined(ARDUINO_AVR_ATmega808) )
#error MegaCoreX megaAVR board not supported
#elif (WIFI_USE_AVR)
#if defined(ARDUINO_AVR_MEGA2560)
#define BOARD_TYPE "AVR Mega2560"
#elif defined(ARDUINO_AVR_MEGA)
#define BOARD_TYPE "AVR Mega"
#else
#define BOARD_TYPE "AVR ADK"
#endif
// For Mega, use Serial1 or Serial3
#define EspSerial Serial3
#elif USE_WIFI_PORTENTA_H7
#warning Portenta_H7 WiFi selected
#else
#warning Unknown or unsupported board
#endif
#ifndef BOARD_NAME
#if defined(ARDUINO_BOARD)
#define BOARD_NAME ARDUINO_BOARD
#elif defined(BOARD_TYPE)
#define BOARD_NAME BOARD_TYPE
#else
#define BOARD_NAME "Unknown Board"
#endif
#endif
#include <WiFiMulti_Generic.h>
char your_ssid[] = "YOUR_SSID"; // your network SSID (name)
char your_pass[] = "12345678"; // your network password
char your_ssid1[] = "YOUR_SSID"; // your network SSID (name)
char your_pass1[] = "12345678"; // your network password
#endif //defines_h

Debug Terminal Output Samples

1. WiFiMulti on RASPBERRY_PI_PICO

The following are debug terminal output when running example WiFiMulti on RASPBERRY_PI_PICO with ESP8266_AT shield using RP2040 arduino-pico core and WiFiEspAT library

1.1 First time => OK

Starting WiFiMulti on RASPBERRY_PI_PICO
WiFiMulti_Generic v1.2.2
WiFi shield init done
[WFM] [addAP] add SSID: HueNet1
[WFM] [addAP] add SSID: HueNet2
Connecting WiFi...
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 6
==============================================================
[WFM] Unknown => # 0 , Channel: 10
[WFM] 4D:AB:D3:E0:38:60
[WFM] SSID: HueNet , RSSI: -24 , Secured: y
==============================================================
[WFM]   Known => # 1 , Channel: 2
[WFM] A5:F4:94:74:7F:68
[WFM] SSID: HueNet1 , RSSI: -33 , Secured: y
==============================================================
[WFM] Unknown => # 2 , Channel: 11
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: HueNetTek , RSSI: -33 , Secured: y
==============================================================
[WFM]   Known => # 3 , Channel: 4
[WFM] E1:EB:E2:E0:38:60
[WFM] SSID: HueNet2 , RSSI: -56 , Secured: y
==============================================================
[WFM] Unknown => # 4 , Channel: 1
[WFM] A6:2:69:6D:2C:E8
[WFM] SSID: SmartRG-02a2 , RSSI: -66 , Secured: y
==============================================================
[WFM] Unknown => # 5 , Channel: 0
[WFM] 1:BF:BA:9C:80:85
[WFM] SSID: -71 , RSSI: 8 , Secured: y
==============================================================
[run] Connecting BSSID: [WFM] A5:F4:94:74:7F:68
[WFM] SSID:  HueNet1 , Channel:  2 , Best dB:  -33
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet1 , IP:  192.168.2.109

WiFi connected, IP address: 192.168.2.109

1.2 Lost WiFi => Scan and auto-reconnect

WiFi lost. Trying to scan and reconnect
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 6
==============================================================
[WFM] Unknown => # 0 , Channel: 10
[WFM] 4D:AB:D3:E0:38:60
[WFM] SSID: HueNet , RSSI: -26 , Secured: y
==============================================================
[WFM] Unknown => # 1 , Channel: 11
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: HueNetTek , RSSI: -38 , Secured: y
==============================================================
[WFM]   Known => # 2 , Channel: 4
[WFM] E1:EB:E2:E0:38:60
[WFM] SSID: HueNet2 , RSSI: -57 , Secured: y
==============================================================
[WFM] Unknown => # 3 , Channel: 5
[WFM] 8A:20:11:2A:C3:E4
[WFM] SSID: DECO-5655 , RSSI: -70 , Secured: y
==============================================================
[WFM] Unknown => # 4 , Channel: 1
[WFM] A6:2:69:6D:2C:E8
[WFM] SSID: SmartRG-02a2 , RSSI: -72 , Secured: y
==============================================================
[WFM] Unknown => # 5 , Channel: 1
[WFM] 16:49:8A:35:94:C0
[WFM] SSID: Access , RSSI: -77 , Secured: y
==============================================================
[run] Connecting BSSID: [WFM] E1:EB:E2:E0:38:60
[WFM] SSID:  HueNet2 , Channel:  4 , Best dB:  -57
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet2 , IP:  192.168.2.109
[WFM] WiFi connected after time:  1
[WFM] SSID: HueNet2 ,RSSI= -65
[WFM] IP address: 192.168.2.109

2. WiFiMulti on MBED RaspberryPi Pico

The following are debug terminal output when running example WiFiMulti on RaspberryPi Pico with ESP8266_AT shield using ArduinoCore-mbed mbed_rp2040 core and WiFiEspAT library

2.1 First time => OK

Starting WiFiMulti on RaspberryPi Pico
WiFiMulti_Generic v1.2.2
WiFi shield init done
[WFM] [addAP] add SSID: HueNet1
[WFM] [addAP] add SSID: HueNet2
Connecting WiFi...
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 6
==============================================================
[WFM] Unknown => # 0 , Channel: 10
[WFM] 4D:AB:D3:E0:38:60
[WFM] SSID: HueNet , RSSI: -23 , Secured: y
==============================================================
[WFM]   Known => # 1 , Channel: 2
[WFM] A5:F4:94:74:7F:68
[WFM] SSID: HueNet1 , RSSI: -35 , Secured: y
==============================================================
[WFM] Unknown => # 2 , Channel: 11
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: HueNetTek , RSSI: -35 , Secured: y
==============================================================
[WFM]   Known => # 3 , Channel: 4
[WFM] E1:EB:E2:E0:38:60
[WFM] SSID: HueNet2 , RSSI: -57 , Secured: y
==============================================================
[WFM] Unknown => # 4 , Channel: 1
[WFM] A6:2:69:6D:2C:E8
[WFM] SSID: SmartRG-02a2 , RSSI: -64 , Secured: y
==============================================================
[WFM] Unknown => # 5 , Channel: 3
[WFM] 15:F8:3F:80:9F:E8
[WFM] SSID: Linksys00043 , RSSI: -71 , Secured: y
==============================================================
[run] Connecting BSSID: [WFM] A5:F4:94:74:7F:68
[WFM] SSID:  HueNet1 , Channel:  2 , Best dB:  -35
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet1 , IP:  192.168.2.109

WiFi connected, IP address: 192.168.2.109

2.2 Lost WiFi => Scan and auto-reconnect

WiFi lost. Trying to scan and reconnect
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 6
==============================================================
[WFM] Unknown => # 0 , Channel: 10
[WFM] 4D:AB:D3:E0:38:60
[WFM] SSID: HueNet , RSSI: -25 , Secured: y
==============================================================
[WFM] Unknown => # 1 , Channel: 11
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: HueNetTek , RSSI: -42 , Secured: y
==============================================================
[WFM]   Known => # 2 , Channel: 4
[WFM] E1:EB:E2:E0:38:60
[WFM] SSID: HueNet2 , RSSI: -60 , Secured: y
==============================================================
[WFM] Unknown => # 3 , Channel: 1
[WFM] A6:2:69:6D:2C:E8
[WFM] SSID: SmartRG-02a2 , RSSI: -69 , Secured: y
==============================================================
[WFM] Unknown => # 4 , Channel: 0
[WFM] 5:8A:20:11:2A:C3
[WFM] SSID: -74 , RSSI: 0 , Secured: y
==============================================================
[WFM] Unknown => # 5 , Channel: 5
[WFM] 8A:20:11:2A:C3:E4
[WFM] SSID: DECO-5655 , RSSI: -75 , Secured: y
==============================================================
[run] Connecting BSSID: [WFM] E1:EB:E2:E0:38:60
[WFM] SSID:  HueNet2 , Channel:  4 , Best dB:  -60
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet2 , IP:  192.168.2.109
[WFM] WiFi connected after time:  1
[WFM] SSID: HueNet2 ,RSSI= -63
[WFM] IP address: 192.168.2.109

3. WiFiMulti on Nano RP2040 Connect

The following are debug terminal output when running example WiFiMulti on Nano RP2040 Connect with WiFiNINA shield using ArduinoCore-mbed mbed_rp2040 core and WiFiNINA_Generic library

3.1 First time => OK

Starting WiFiMulti on Nano RP2040 Connect
WiFiMulti_Generic v1.2.2
[WFM] [addAP] add SSID: HueNet1
[WFM] [addAP] add SSID: HueNet2
Connecting WiFi...
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 10
==============================================================
[WFM] Unknown => # 0 , Channel: 10
[WFM] 4D:AB:D3:E0:38:60
[WFM] SSID: HueNet , RSSI: -19 , Secured: y
==============================================================
[WFM]   Known => # 1 , Channel: 2
[WFM] A5:F4:94:74:7F:68
[WFM] SSID: HueNet1 , RSSI: -23 , Secured: y
==============================================================
[WFM]   Known => # 2 , Channel: 4
[WFM] E1:EB:E2:E0:38:60
[WFM] SSID: HueNet2 , RSSI: -49 , Secured: y
==============================================================
[WFM] Unknown => # 3 , Channel: 1
[WFM] A6:2:69:6D:2C:E8
[WFM] SSID: SmartRG-02a2 , RSSI: -72 , Secured: y
==============================================================
[WFM] Unknown => # 4 , Channel: 11
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: HueNetTek , RSSI: -75 , Secured: y
==============================================================
[WFM] Unknown => # 5 , Channel: 1
[WFM] 16:49:8A:35:94:C0
[WFM] SSID: Access , RSSI: -79 , Secured: y
==============================================================
[WFM] Unknown => # 6 , Channel: 1
[WFM] D5:1C:15:BC:FA:EE
[WFM] SSID: ESP151CD5 , RSSI: -79 , Secured: y
==============================================================
[WFM] Unknown => # 7 , Channel: 3
[WFM] EA:73:DC:D2:B4:F2
[WFM] SSID: FishBowl , RSSI: -81 , Secured: y
==============================================================
[WFM] Unknown => # 8 , Channel: 5
[WFM] E6:D:11:2A:C3:E4
[WFM] SSID: DECO-5655 , RSSI: -82 , Secured: y
==============================================================
[WFM] Unknown => # 9 , Channel: 5
[WFM] 28:ED:8:2E:8F:68
[WFM] SSID: rogers786 , RSSI: -82 , Secured: y
==============================================================
[run] Connecting BSSID: [WFM] A5:F4:94:74:7F:68
[WFM] SSID:  HueNet1 , Channel:  2 , Best dB:  -23
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet1 , IP:  192.168.2.105

WiFi connected, IP address: 192.168.2.105

3.2 Lost WiFi => Scan and auto-reconnect

WiFi lost. Trying to scan and reconnect
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 10
==============================================================
[WFM] Unknown => # 0 , Channel: 10
[WFM] 4D:AB:D3:E0:38:60
[WFM] SSID: HueNet , RSSI: -22 , Secured: y
==============================================================
[WFM] Unknown => # 1 , Channel: 11
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: HueNetTek , RSSI: -32 , Secured: y
==============================================================
[WFM]   Known => # 2 , Channel: 4
[WFM] E1:EB:E2:E0:38:60
[WFM] SSID: HueNet2 , RSSI: -53 , Secured: y
==============================================================
[WFM] Unknown => # 3 , Channel: 1
[WFM] D5:1C:15:BC:FA:EE
[WFM] SSID: ESP151CD5 , RSSI: -77 , Secured: y
==============================================================
[WFM] Unknown => # 4 , Channel: 1
[WFM] A6:2:69:6D:2C:E8
[WFM] SSID: SmartRG-02a2 , RSSI: -80 , Secured: y
==============================================================
[WFM] Unknown => # 5 , Channel: 1
[WFM] 16:49:8A:35:94:C0
[WFM] SSID: Access , RSSI: -81 , Secured: y
==============================================================
[WFM] Unknown => # 6 , Channel: 5
[WFM] E6:D:11:2A:C3:E4
[WFM] SSID: DECO-5655 , RSSI: -83 , Secured: y
==============================================================
[WFM] Unknown => # 7 , Channel: 5
[WFM] E6:D:11:2A:C3:EA
[WFM] SSID: Guest5655 , RSSI: -83 , Secured: y
==============================================================
[WFM] Unknown => # 8 , Channel: 5
[WFM] 8A:20:11:2A:C3:E4
[WFM] SSID: DECO-5655 , RSSI: -84 , Secured: y
==============================================================
[WFM] Unknown => # 9 , Channel: 11
[WFM] 58:9:B:2E:8F:68
[WFM] SSID: Rogers 786 , RSSI: -85 , Secured: y
==============================================================
[run] Connecting BSSID: [WFM] E1:EB:E2:E0:38:60
[WFM] SSID:  HueNet2 , Channel:  4 , Best dB:  -53
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet2 , IP:  192.168.2.105
[WFM] WiFi connected after time:  1
[WFM] SSID: HueNet2 ,RSSI= -47
[WFM] IP address: 192.168.2.105

4. WiFiMulti on NANO_RP2040_CONNECT

The following are debug terminal output when running example WiFiMulti on NANO_RP2040_CONNECT with ESP8266_AT shield using RP2040 arduino-pico core and WiFiNINA_Generic library

4.1 First time => OK

Starting WiFiMulti on NANO_RP2040_CONNECT
WiFiMulti_Generic v1.2.2
[WFM] [addAP] add SSID: HueNet1
[WFM] [addAP] add SSID: HueNet2
Connecting WiFi...
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 10
==============================================================
[WFM]   Known => # 0 , Channel: 2
[WFM] A5:F4:94:74:7F:68
[WFM] SSID: HueNet1 , RSSI: -17 , Secured: y
==============================================================
[WFM] Unknown => # 1 , Channel: 10
[WFM] 4D:AB:D3:E0:38:60
[WFM] SSID: HueNet , RSSI: -21 , Secured: y
==============================================================
[WFM] Unknown => # 2 , Channel: 11
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: HueNetTek , RSSI: -31 , Secured: y
==============================================================
[WFM] Unknown => # 3 , Channel: 4
[WFM] E1:EB:E2:E0:38:60
[WFM] SSID: HueNet2 , RSSI: -50 , Secured: y
==============================================================
[WFM] Unknown => # 4 , Channel: 1
[WFM] A6:2:69:6D:2C:E8
[WFM] SSID: SmartRG-02a2 , RSSI: -72 , Secured: y
==============================================================
[WFM] Unknown => # 5 , Channel: 1
[WFM] D5:1C:15:BC:FA:EE
[WFM] SSID: ESP151CD5 , RSSI: -83 , Secured: y
==============================================================
[WFM] Unknown => # 6 , Channel: 3
[WFM] EA:73:DC:D2:B4:F2
[WFM] SSID: FishBowl , RSSI: -83 , Secured: y
==============================================================
[WFM] Unknown => # 7 , Channel: 6
[WFM] 42:8E:4D:42:5E:F8
[WFM] SSID: El khoury , RSSI: -85 , Secured: y
==============================================================
[WFM] Unknown => # 8 , Channel: 6
[WFM] 7:9:F8:1:F2:40
[WFM] SSID: BELL627 , RSSI: -87 , Secured: y
==============================================================
[WFM] Unknown => # 9 , Channel: 11
[WFM] A0:E9:61:BF:92:F4
[WFM] SSID: house , RSSI: -88 , Secured: y
==============================================================
[run] Connecting BSSID: [WFM] A5:F4:94:74:7F:68
[WFM] SSID:  HueNet1 , Channel:  2 , Best dB:  -17
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet1 , IP:  192.168.2.105

WiFi connected, IP address: 192.168.2.105

4.2 Lost WiFi => Scan and auto-reconnect

WiFi lost. Trying to scan and reconnect
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 10
==============================================================
[WFM] Unknown => # 0 , Channel: 10
[WFM] 4D:AB:D3:E0:38:60
[WFM] SSID: HueNet , RSSI: -22 , Secured: y
==============================================================
[WFM] Unknown => # 1 , Channel: 11
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: HueNetTek , RSSI: -32 , Secured: y
==============================================================
[WFM]   Known => # 2 , Channel: 4
[WFM] E1:EB:E2:E0:38:60
[WFM] SSID: HueNet2 , RSSI: -53 , Secured: y
==============================================================
[WFM] Unknown => # 3 , Channel: 1
[WFM] D5:1C:15:BC:FA:EE
[WFM] SSID: ESP151CD5 , RSSI: -77 , Secured: y
==============================================================
[WFM] Unknown => # 4 , Channel: 1
[WFM] A6:2:69:6D:2C:E8
[WFM] SSID: SmartRG-02a2 , RSSI: -80 , Secured: y
==============================================================
[WFM] Unknown => # 5 , Channel: 1
[WFM] 16:49:8A:35:94:C0
[WFM] SSID: Access , RSSI: -81 , Secured: y
==============================================================
[WFM] Unknown => # 6 , Channel: 5
[WFM] E6:D:11:2A:C3:E4
[WFM] SSID: DECO-5655 , RSSI: -83 , Secured: y
==============================================================
[WFM] Unknown => # 7 , Channel: 5
[WFM] E6:D:11:2A:C3:EA
[WFM] SSID: Guest5655 , RSSI: -83 , Secured: y
==============================================================
[WFM] Unknown => # 8 , Channel: 5
[WFM] 8A:20:11:2A:C3:E4
[WFM] SSID: DECO-5655 , RSSI: -84 , Secured: y
==============================================================
[WFM] Unknown => # 9 , Channel: 11
[WFM] 58:9:B:2E:8F:68
[WFM] SSID: Rogers 786 , RSSI: -85 , Secured: y
==============================================================
[run] Connecting BSSID: [WFM] E1:EB:E2:E0:38:60
[WFM] SSID:  HueNet2 , Channel:  4 , Best dB:  -53
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet2 , IP:  192.168.2.105
[WFM] WiFi connected after time:  1
[WFM] SSID: HueNet2 ,RSSI= -47
[WFM] IP address: 192.168.2.105

5. WiFiMulti on ESP8266_NODEMCU_ESP12E

The following are debug terminal output when running example WiFiMulti on ESP8266_NODEMCU_ESP12E

5.1 First time => OK

Starting WiFiMulti on ESP8266_NODEMCU_ESP12E
WiFiMulti_Generic v1.2.2
[WFM] [APlistAdd] Add SSID: SSID = HueNet1
[WFM] [APlistAdd] Add SSID: SSID = HueNet2
Connecting WiFi...
[WFM] Connecting saved WiFi

WiFi connected, IP address: 192.168.2.103

5.2 Lost WiFi => Scan and auto-reconnect

WiFi lost. Trying to scan and reconnect
[WFM] Start scan
[WFM] Sorted indices: 
[WFM] Known networks index = 3
[WFM] Connecting SSID = HueNet2
[WFM] WiFi connected after time:  1
[WFM] SSID: HueNet2 ,RSSI= -56
[WFM] Channel: 4 ,IP address: 192.168.2.103

6. WiFiMulti on ESP32C3_DEV

The following are debug terminal output when running example WiFiMulti on ESP32C3_DEV

6.1 First time => OK

Starting WiFiMulti on ESP32C3_DEV
WiFiMulti_Generic v1.2.2
[WFM] [addAP] add SSID: HueNet1
[WFM] [addAP] add SSID: HueNet2
Connecting WiFi...
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 23
==============================================================
[WFM] Unknown => # 0 , Channel: 10
[WFM] 60:38:E0:D3:AB:4D
[WFM] SSID: HueNet , RSSI: -24 , Secured: y
==============================================================
[WFM]   Known => # 1 , Channel: 2
[WFM] 68:7F:74:94:F4:A5
[WFM] SSID: HueNet1 , RSSI: -40 , Secured: y
==============================================================
[WFM]   Known => # 2 , Channel: 4
[WFM] 60:38:E0:E2:EB:E1
[WFM] SSID: HueNet2 , RSSI: -45 , Secured: y
==============================================================
[WFM] Unknown => # 3 , Channel: 11
[WFM] 3C:90:66:E3:9:F1
[WFM] SSID: HueNetTek , RSSI: -47 , Secured: y
==============================================================
[WFM] Unknown => # 4 , Channel: 1
[WFM] E8:2C:6D:69:2:A6
[WFM] SSID: SmartRG-02a2 , RSSI: -64 , Secured: y
==============================================================
[WFM] Unknown => # 5 , Channel: 6
[WFM] F8:5E:42:4D:8E:42
[WFM] SSID: El khoury , RSSI: -67 , Secured: y
==============================================================
[WFM] Unknown => # 6 , Channel: 3
[WFM] E8:9F:80:3F:F8:15
[WFM] SSID: Linksys00043 , RSSI: -71 , Secured: y
==============================================================
[WFM] Unknown => # 7 , Channel: 5
[WFM] E4:C3:2A:11:D:E6
[WFM] SSID: DECO-5655 , RSSI: -72 , Secured: y
==============================================================
[WFM] Unknown => # 8 , Channel: 5
[WFM] EA:C3:2A:11:D:E6
[WFM] SSID: Guest5655 , RSSI: -72 , Secured: y
==============================================================
[WFM] Unknown => # 9 , Channel: 5
[WFM] 68:8F:2E:8:ED:28
[WFM] SSID: rogers786 , RSSI: -72 , Secured: y
==============================================================
[WFM] Unknown => # 10 , Channel: 11
[WFM] 68:8F:2E:B:9:58
[WFM] SSID: Rogers 786 , RSSI: -75 , Secured: y
==============================================================
[WFM] Unknown => # 11 , Channel: 5
[WFM] E4:C3:2A:11:20:8A
[WFM] SSID: DECO-5655 , RSSI: -76 , Secured: y
==============================================================
[WFM] Unknown => # 12 , Channel: 1
[WFM] C0:94:35:8A:49:16
[WFM] SSID: Access , RSSI: -77 , Secured: y
==============================================================
[WFM] Unknown => # 13 , Channel: 1
[WFM] EE:FA:BC:15:1C:D5
[WFM] SSID: ESP151CD5 , RSSI: -80 , Secured: y
==============================================================
[WFM] Unknown => # 14 , Channel: 3
[WFM] F0:B4:D2:EC:73:EA
[WFM] SSID: FishTank , RSSI: -80 , Secured: y
==============================================================
[WFM] Unknown => # 15 , Channel: 3
[WFM] 70:8B:CD:C8:B0:F0
[WFM] SSID: ericnetwork , RSSI: -81 , Secured: y
==============================================================
[WFM] Unknown => # 16 , Channel: 1
[WFM] F8:5E:42:A2:94:B7
[WFM] SSID: Offline5 , RSSI: -82 , Secured: y
==============================================================
[WFM] Unknown => # 17 , Channel: 1
[WFM] 54:64:D9:31:39:A4
[WFM] SSID: VIRGIN874 , RSSI: -82 , Secured: y
==============================================================
[WFM] Unknown => # 18 , Channel: 3
[WFM] F2:B4:D2:DC:73:EA
[WFM] SSID: FishBowl , RSSI: -82 , Secured: y
==============================================================
[WFM] Unknown => # 19 , Channel: 11
[WFM] F4:92:BF:61:E9:A0
[WFM] SSID: house , RSSI: -84 , Secured: y
==============================================================
[WFM] Unknown => # 20 , Channel: 5
[WFM] EA:C3:2A:11:20:E
[WFM] SSID: Guest5655 , RSSI: -85 , Secured: y
==============================================================
[WFM] Unknown => # 21 , Channel: 11
[WFM] 80:D0:4A:48:F2:DA
[WFM] SSID: Jessie , RSSI: -86 , Secured: y
==============================================================
[WFM] Unknown => # 22 , Channel: 11
[WFM] 98:42:65:FF:22:F6
[WFM] SSID: BELL042 , RSSI: -87 , Secured: y
==============================================================
[run] Connecting BSSID: [WFM] 68:7F:74:94:F4:A5
[WFM] SSID:  HueNet1 , Channel:  2 , Best dB:  -40
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet1 , IP:  192.168.2.86
[WFM] [run] MAC:  68:7F:74:94:F4:A5 , Channel:  2

WiFi connected, IP address: 192.168.2.86

6.2 Lost WiFi => Scan and auto-reconnect

WiFi lost. Trying to scan and reconnect
[WFM] [run] delete old wifi config...
[WFM] [run] start scan
WiFi not connected!
WiFi lost. Trying to scan and reconnect
WiFi not connected!
WiFi lost. Trying to scan and reconnect
WiFi not connected!
WiFi lost. Trying to scan and reconnect
WiFi not connected!
WiFi lost. Trying to scan and reconnect
WiFi not connected!
WiFi lost. Trying to scan and reconnect
WiFi not connected!
WiFi lost. Trying to scan and reconnect
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 16
==============================================================
[WFM] Unknown => # 0 , Channel: 10
[WFM] 60:38:E0:D3:AB:4D
[WFM] SSID: HueNet , RSSI: -26 , Secured: y
==============================================================
[WFM] Unknown => # 1 , Channel: 11
[WFM] 3C:90:66:E3:9:F1
[WFM] SSID: HueNetTek , RSSI: -39 , Secured: y
==============================================================
[WFM]   Known => # 2 , Channel: 4
[WFM] 60:38:E0:E2:EB:E1
[WFM] SSID: HueNet2 , RSSI: -45 , Secured: y
==============================================================
[WFM] Unknown => # 3 , Channel: 1
[WFM] E8:2C:6D:69:2:A6
[WFM] SSID: SmartRG-02a2 , RSSI: -68 , Secured: y
==============================================================
[WFM] Unknown => # 4 , Channel: 3
[WFM] E8:9F:80:3F:F8:15
[WFM] SSID: Linksys00043 , RSSI: -69 , Secured: y
==============================================================
[WFM] Unknown => # 5 , Channel: 6
[WFM] F8:5E:42:4D:8E:42
[WFM] SSID: El khoury , RSSI: -69 , Secured: y
==============================================================
[WFM] Unknown => # 6 , Channel: 11
[WFM] 68:8F:2E:B:9:58
[WFM] SSID: Rogers 786 , RSSI: -72 , Secured: y
==============================================================
[WFM] Unknown => # 7 , Channel: 1
[WFM] C0:94:35:8A:49:16
[WFM] SSID: Access , RSSI: -77 , Secured: y
==============================================================
[WFM] Unknown => # 8 , Channel: 1
[WFM] EE:FA:BC:15:1C:D5
[WFM] SSID: ESP151CD5 , RSSI: -78 , Secured: y
==============================================================
[WFM] Unknown => # 9 , Channel: 1
[WFM] F8:5E:42:A2:94:B7
[WFM] SSID: Offline5 , RSSI: -81 , Secured: y
==============================================================
[WFM] Unknown => # 10 , Channel: 1
[WFM] 54:64:D9:31:39:A4
[WFM] SSID: VIRGIN874 , RSSI: -82 , Secured: y
==============================================================
[WFM] Unknown => # 11 , Channel: 11
[WFM] 80:D0:4A:48:F2:DA
[WFM] SSID: Jessie , RSSI: -83 , Secured: y
==============================================================
[WFM] Unknown => # 12 , Channel: 11
[WFM] F4:92:BF:61:E9:A0
[WFM] SSID: house , RSSI: -84 , Secured: y
==============================================================
[WFM] Unknown => # 13 , Channel: 11
[WFM] 98:42:65:FF:22:F6
[WFM] SSID: BELL042 , RSSI: -85 , Secured: y
==============================================================
[WFM] Unknown => # 14 , Channel: 11
[WFM] 60:32:B1:52:59:B6
[WFM] SSID: TP-Link_59B6 , RSSI: -87 , Secured: y
==============================================================
[WFM] Unknown => # 15 , Channel: 6
[WFM] FA:8F:CA:8E:DF:36
[WFM] SSID: Living Room Speaker 2.o , RSSI: -88 , Secured: n
==============================================================
[run] Connecting BSSID: [WFM] 60:38:E0:E2:EB:E1
[WFM] SSID:  HueNet2 , Channel:  4 , Best dB:  -45
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet2 , IP:  192.168.2.86
[WFM] [run] MAC:  60:38:E0:E2:EB:E1 , Channel:  4

7. WiFiMulti on ESP32S3_DEV

The following are debug terminal output when running example WiFiMulti on ESP32S3_DEV

7.1 First time => OK

Starting WiFiMulti on ESP32S3_DEV
WiFiMulti_Generic v1.2.2
[WFM] [addAP] add SSID: HueNet1
[WFM] [addAP] add SSID: HueNet2
Connecting WiFi...
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 29
==============================================================
[WFM]   Known => # 0 , Channel: 2
[WFM] 68:7F:74:94:F4:A5
[WFM] SSID: HueNet1 , RSSI: -27 , Secured: y
==============================================================
[WFM] Unknown => # 1 , Channel: 10
[WFM] 60:38:E0:D3:AB:4D
[WFM] SSID: HueNet , RSSI: -28 , Secured: y
==============================================================
[WFM] Unknown => # 2 , Channel: 11
[WFM] 3C:90:66:E3:9:F1
[WFM] SSID: HueNetTek , RSSI: -43 , Secured: y
==============================================================
[WFM]   Known => # 3 , Channel: 4
[WFM] 60:38:E0:E2:EB:E1
[WFM] SSID: HueNet2 , RSSI: -51 , Secured: y
==============================================================
[WFM] Unknown => # 4 , Channel: 1
[WFM] EE:FA:BC:15:1C:D5
[WFM] SSID: ESP151CD5 , RSSI: -69 , Secured: y
==============================================================
[WFM] Unknown => # 5 , Channel: 1
[WFM] E8:2C:6D:69:2:A6
[WFM] SSID: SmartRG-02a2 , RSSI: -72 , Secured: y
==============================================================
[WFM] Unknown => # 6 , Channel: 11
[WFM] 68:8F:2E:B:9:58
[WFM] SSID: Rogers 786 , RSSI: -75 , Secured: y
==============================================================
[WFM] Unknown => # 7 , Channel: 3
[WFM] E8:9F:80:3F:F8:15
[WFM] SSID: Linksys00043 , RSSI: -76 , Secured: y
==============================================================
[WFM] Unknown => # 8 , Channel: 5
[WFM] E4:C3:2A:11:D:E6
[WFM] SSID: DECO-5655 , RSSI: -76 , Secured: y
==============================================================
[WFM] Unknown => # 9 , Channel: 5
[WFM] EA:C3:2A:11:D:E6
[WFM] SSID: Guest5655 , RSSI: -76 , Secured: y
==============================================================
[WFM] Unknown => # 10 , Channel: 5
[WFM] E4:C3:2A:11:20:8A
[WFM] SSID: DECO-5655 , RSSI: -78 , Secured: y
==============================================================
[WFM] Unknown => # 11 , Channel: 5
[WFM] EA:C3:2A:11:20:8A
[WFM] SSID: Guest5655 , RSSI: -78 , Secured: y
==============================================================
[WFM] Unknown => # 12 , Channel: 1
[WFM] C0:94:35:8A:49:16
[WFM] SSID: Access , RSSI: -79 , Secured: y
==============================================================
[WFM] Unknown => # 13 , Channel: 5
[WFM] 68:8F:2E:8:ED:28
[WFM] SSID: rogers786 , RSSI: -80 , Secured: y
==============================================================
[WFM] Unknown => # 14 , Channel: 6
[WFM] F8:5E:42:4D:8E:42
[WFM] SSID: El khoury , RSSI: -81 , Secured: y
==============================================================
[WFM] Unknown => # 15 , Channel: 11
[WFM] F4:92:BF:61:E9:A0
[WFM] SSID: house , RSSI: -84 , Secured: y
==============================================================
[WFM] Unknown => # 16 , Channel: 1
[WFM] 3A:B7:F1:BB:17:B1
[WFM] SSID: Waterhome , RSSI: -85 , Secured: y
==============================================================
[WFM] Unknown => # 17 , Channel: 3
[WFM] F0:B4:D2:EC:73:EA
[WFM] SSID: FishTank , RSSI: -85 , Secured: y
==============================================================
[WFM] Unknown => # 18 , Channel: 1
[WFM] 3A:B7:F1:BA:9E:C9
[WFM] SSID: Waterhome , RSSI: -87 , Secured: y
==============================================================
[WFM] Unknown => # 19 , Channel: 11
[WFM] 4C:71:D:97:4D:C0
[WFM] SSID: WirelessMississauga , RSSI: -87 , Secured: n
==============================================================
[WFM] Unknown => # 20 , Channel: 1
[WFM] 3A:B7:F1:BB:45:9
[WFM] SSID: Waterhome , RSSI: -88 , Secured: y
==============================================================
[WFM] Unknown => # 21 , Channel: 1
[WFM] 54:64:D9:31:39:A4
[WFM] SSID: VIRGIN874 , RSSI: -90 , Secured: y
==============================================================
[WFM] Unknown => # 22 , Channel: 6
[WFM] F4:92:BF:61:EA:FC
[WFM] SSID: Access 2.0 , RSSI: -90 , Secured: y
==============================================================
[WFM] Unknown => # 23 , Channel: 6
[WFM] F8:5E:42:BA:CE:CA
[WFM] SSID: labib , RSSI: -90 , Secured: y
==============================================================
[WFM] Unknown => # 24 , Channel: 11
[WFM] AC:20:2E:6:7:28
[WFM] SSID: Jasmine , RSSI: -90 , Secured: y
==============================================================
[WFM] Unknown => # 25 , Channel: 5
[WFM] E4:C3:2A:11:20:E
[WFM] SSID: DECO-5655 , RSSI: -91 , Secured: y
==============================================================
[WFM] Unknown => # 26 , Channel: 6
[WFM] 40:F2:1:F8:9:7
[WFM] SSID: BELL627 , RSSI: -93 , Secured: y
==============================================================
[WFM] Unknown => # 27 , Channel: 11
[WFM] 70:4F:57:14:C4:15
[WFM] SSID: SamLAN , RSSI: -93 , Secured: y
==============================================================
[WFM] Unknown => # 28 , Channel: 11
[WFM] 18:D6:C7:23:A4:B2
[WFM] SSID: JJ Realestate Investments , RSSI: -93 , Secured: y
==============================================================
[run] Connecting BSSID: [WFM] 68:7F:74:94:F4:A5
[WFM] SSID:  HueNet1 , Channel:  2 , Best dB:  -27
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet1 , IP:  192.168.2.83
[WFM] [run] MAC:  68:7F:74:94:F4:A5 , Channel:  2

WiFi connected, IP address: 192.168.2.83

7.2 Lost WiFi => Scan and auto-reconnect

WiFi lost. Trying to scan and reconnect
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 18
==============================================================
[WFM] Unknown => # 0 , Channel: 10
[WFM] 60:38:E0:D3:AB:4D
[WFM] SSID: HueNet , RSSI: -26 , Secured: y
==============================================================
[WFM]   Known => # 1 , Channel: 2
[WFM] 68:7F:74:94:F4:A5
[WFM] SSID: HueNet1 , RSSI: -27 , Secured: y
==============================================================
[WFM] Unknown => # 2 , Channel: 11
[WFM] 3C:90:66:E3:9:F1
[WFM] SSID: HueNetTek , RSSI: -39 , Secured: y
==============================================================
[WFM]   Known => # 3 , Channel: 4
[WFM] 60:38:E0:E2:EB:E1
[WFM] SSID: HueNet2 , RSSI: -49 , Secured: y
==============================================================
[WFM] Unknown => # 4 , Channel: 1
[WFM] EE:FA:BC:15:1C:D5
[WFM] SSID: ESP151CD5 , RSSI: -72 , Secured: y
==============================================================
[WFM] Unknown => # 5 , Channel: 1
[WFM] E8:2C:6D:69:2:A6
[WFM] SSID: SmartRG-02a2 , RSSI: -74 , Secured: y
==============================================================
[WFM] Unknown => # 6 , Channel: 11
[WFM] 68:8F:2E:B:9:58
[WFM] SSID: Rogers 786 , RSSI: -75 , Secured: y
==============================================================
[WFM] Unknown => # 7 , Channel: 3
[WFM] E8:9F:80:3F:F8:15
[WFM] SSID: Linksys00043 , RSSI: -76 , Secured: y
==============================================================
[WFM] Unknown => # 8 , Channel: 6
[WFM] F8:5E:42:4D:8E:42
[WFM] SSID: El khoury , RSSI: -79 , Secured: y
==============================================================
[WFM] Unknown => # 9 , Channel: 3
[WFM] F2:B4:D2:DC:73:EA
[WFM] SSID: FishBowl , RSSI: -80 , Secured: y
==============================================================
[WFM] Unknown => # 10 , Channel: 3
[WFM] 70:8B:CD:C8:B0:F0
[WFM] SSID: ericnetwork , RSSI: -81 , Secured: y
==============================================================
[WFM] Unknown => # 11 , Channel: 1
[WFM] C0:94:35:8A:49:16
[WFM] SSID: Access , RSSI: -83 , Secured: y
==============================================================
[WFM] Unknown => # 12 , Channel: 11
[WFM] F4:92:BF:61:E9:A0
[WFM] SSID: house , RSSI: -84 , Secured: y
==============================================================
[WFM] Unknown => # 13 , Channel: 11
[WFM] 98:42:65:FF:22:F6
[WFM] SSID: BELL042 , RSSI: -86 , Secured: y
==============================================================
[WFM] Unknown => # 14 , Channel: 6
[WFM] 8C:6A:8D:4A:D5:7C
[WFM] SSID: AdeyemiHome , RSSI: -87 , Secured: y
==============================================================
[WFM] Unknown => # 15 , Channel: 6
[WFM] F4:92:BF:61:EA:FC
[WFM] SSID: Access 2.0 , RSSI: -89 , Secured: y
==============================================================
[WFM] Unknown => # 16 , Channel: 6
[WFM] 98:52:4A:74:56:AF
[WFM] SSID: Waterhome , RSSI: -90 , Secured: y
==============================================================
[WFM] Unknown => # 17 , Channel: 1
[WFM] 28:BD:89:F0:A1:AD
[WFM] SSID: Home , RSSI: -92 , Secured: y
==============================================================
[run] Connecting BSSID: [WFM] 68:7F:74:94:F4:A5
[WFM] SSID:  HueNet1 , Channel:  2 , Best dB:  -27
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet1 , IP:  192.168.2.83
[WFM] [run] MAC:  68:7F:74:94:F4:A5 , Channel:  2
[WFM] WiFi connected after time:  1
[WFM] SSID: HueNet1 ,RSSI= -31
[WFM] Channel: 2 ,IP address: 192.168.2.83

8. WiFiMulti on Arduino AVR Mega2560

The following are debug terminal output when running example WiFiMulti on Arduino AVR Mega2560

8.1 First time => OK

Starting WiFiMulti on Arduino AVR Mega2560/ADK
WiFiMulti_Generic v1.2.2
WiFi shield init done
[WFM] [addAP] add SSID: HueNet1
[WFM] [addAP] add SSID: HueNet2
Connecting WiFi...
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 6
==============================================================
[WFM] Unknown => # 0 , Channel: 1
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: HueNetTek , RSSI: -37 , Secured: y
==============================================================
[WFM] Unknown => # 1 , Channel: 10
[WFM] 4D:AB:D3:E0:38:60
[WFM] SSID: HueNet , RSSI: -37 , Secured: y
==============================================================
[WFM]   Known => # 2 , Channel: 4
[WFM] A5:F4:94:74:7F:68
[WFM] SSID: HueNet1 , RSSI: -39 , Secured: y
==============================================================
[WFM]   Known => # 3 , Channel: 4
[WFM] E1:EB:E2:E0:38:60
[WFM] SSID: HueNet2 , RSSI: -60 , Secured: y
==============================================================
[WFM] Unknown => # 4 , Channel: 3
[WFM] EA:73:EC:D2:B4:F0
[WFM] SSID: FishTank , RSSI: -86 , Secured: y
==============================================================
[WFM] Unknown => # 5 , Channel: 1
[WFM] A6:2:69:6D:2C:E8
[WFM] SSID: SmartRG-02a2 , RSSI: -86 , Secured: y
==============================================================
[run] Connecting BSSID: [WFM] A5:F4:94:74:7F:68
[WFM] SSID:  HueNet1 , Channel:  4 , Best dB:  -39
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet1 , IP:  192.168.2.80

WiFi connected, IP address: 192.168.2.80
HHHHHHH

8.2 Lost WiFi => Scan and auto-reconnect

WiFi lost. Call connectMultiWiFi in loop
WiFi lost. Trying to scan and reconnect
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 4
==============================================================
[WFM] Unknown => # 0 , Channel: 10
[WFM] 4D:AB:D3:E0:38:60
[WFM] SSID: HueNet , RSSI: -33 , Secured: y
==============================================================
[WFM] Unknown => # 1 , Channel: 1
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: HueNetTek , RSSI: -42 , Secured: y
==============================================================
[WFM]   Known => # 2 , Channel: 4
[WFM] E1:EB:E2:E0:38:60
[WFM] SSID: HueNet2 , RSSI: -63 , Secured: y
==============================================================
[WFM] Unknown => # 3 , Channel: 5
[WFM] 8A:20:11:2A:C3:E4
[WFM] SSID: DECO-5655 , RSSI: -92 , Secured: y
==============================================================
[run] Connecting BSSID: [WFM] E1:EB:E2:E0:38:60
[WFM] SSID:  HueNet2 , Channel:  4 , Best dB:  -63
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet2 , IP:  192.168.2.80
[WFM] WiFi connected after time:  1
[WFM] SSID: HueNet2 ,RSSI= -64
[WFM] IP address: 192.168.2.80
H

9. WiFiMulti on RTL8720DN

The following are debug terminal output when running example WiFiMulti on RTL8720DN

9.1 First time => OK

Starting WiFiMulti on RTL8720DN
WiFiMulti_Generic v1.2.2
[WFM] [addAP] add SSID: HueNet1
[WFM] [addAP] add SSID: HueNet2
Connecting WiFi...
interface 0 is initialized
interface 1 is initialized
Initializing WIFI ...
WIFI initialized
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 24
==============================================================
[WFM] Unknown => # 0
[WFM] SSID: HueNet_5G , RSSI: -21 , Secured: y
==============================================================
[WFM] Unknown => # 1
[WFM] SSID: HueNet , RSSI: -27 , Secured: y
==============================================================
[WFM]   Known => # 2
[WFM] SSID: HueNet1 , RSSI: -28 , Secured: y
==============================================================
[WFM] Unknown => # 3
[WFM] SSID: HueNetTek_5G , RSSI: -33 , Secured: y
==============================================================
[WFM] Unknown => # 4
[WFM] SSID: HueNetTek , RSSI: -44 , Secured: y
==============================================================
[WFM]   Known => # 5
[WFM] SSID: HueNet2 , RSSI: -45 , Secured: y
==============================================================
[WFM] Unknown => # 6
[WFM] SSID: HueNet2_5G , RSSI: -56 , Secured: y
==============================================================
[WFM] Unknown => # 7
[WFM] SSID: El khoury , RSSI: -74 , Secured: y
==============================================================
[WFM] Unknown => # 8
[WFM] SSID:  , RSSI: -75 , Secured: y
==============================================================
[WFM] Unknown => # 9
[WFM] SSID:  , RSSI: -75 , Secured: y
==============================================================
[WFM] Unknown => # 10
[WFM] SSID: Rogers 786 , RSSI: -82 , Secured: y
==============================================================
[WFM] Unknown => # 11
[WFM] SSID:  , RSSI: -84 , Secured: y
==============================================================
[WFM] Unknown => # 12
[WFM] SSID: El khoury , RSSI: -85 , Secured: y
==============================================================
[WFM] Unknown => # 13
[WFM] SSID: Access , RSSI: -86 , Secured: y
==============================================================
[WFM] Unknown => # 14
[WFM] SSID: FishTank , RSSI: -86 , Secured: y
==============================================================
[WFM] Unknown => # 15
[WFM] SSID:  , RSSI: -86 , Secured: y
==============================================================
[WFM] Unknown => # 16
[WFM] SSID: ESP151CD5 , RSSI: -87 , Secured: y
==============================================================
[WFM] Unknown => # 17
[WFM] SSID:  , RSSI: -87 , Secured: y
==============================================================
[WFM] Unknown => # 18
[WFM] SSID: BELL042 , RSSI: -88 , Secured: y
==============================================================
[WFM] Unknown => # 19
[WFM] SSID:  , RSSI: -88 , Secured: y
==============================================================
[WFM] Unknown => # 20
[WFM] SSID: house , RSSI: -90 , Secured: y
==============================================================
[WFM] Unknown => # 21
[WFM] SSID: WirelessMississauga , RSSI: -90 , Secured: n
==============================================================
[WFM] Unknown => # 22
[WFM] SSID: JJ Realestate Investments , RSSI: -95 , Secured: y
==============================================================
[WFM] Unknown => # 23
[WFM] SSID: TP-Link_59B6 , RSSI: -96 , Secured: y
==============================================================
[WFM] [run] Connecting SSID:  HueNet1 , Best dB:  -28
RTL8721D[Driver]: set ssid [HueNet1] 
RTL8721D[Driver]: rtw_set_wpa_ie[1160]: AuthKeyMgmt = 0x2 
RTL8721D[Driver]: rtw_restruct_sec_ie[4225]: no pmksa cached 
RTL8721D[Driver]: start auth to 68:7f:74:94:f4:a5
RTL8721D[Driver]: auth alg = 2
RTL8721D[Driver]: 
OnAuthClient:algthm = 0, seq = 2, status = 0, sae_msg_len = 11
RTL8721D[Driver]: auth success, start assoc
RTL8721D[Driver]: association success(res=1)
RTL8721D[Driver]: ClientSendEAPOL[1624]: no use cache pmksa 
RTL8721D[Driver]: ClientSendEAPOL[1624]: no use cache pmksa 
RTL8721D[Driver]: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4)
RTL8721D[Driver]: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
Interface 0 IP address : 192.168.2.78[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet1 , IP:  192.168.2.78
WiFi connected, IP address: 192.168.2.78
HHH

9.2 Lost WiFi => Scan and auto-reconnect

RTL8721D[Driver]: no beacon for a long time, disconnect or roaming

WiFi lost. Call connectMultiWiFi in loop
WiFi lost. Trying to scan and reconnect
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 23
==============================================================
[WFM] Unknown => # 0
[WFM] SSID: HueNet_5G , RSSI: -21 , Secured: y
==============================================================
[WFM] Unknown => # 1
[WFM] SSID: HueNet , RSSI: -26 , Secured: y
==============================================================
[WFM] Unknown => # 2
[WFM] SSID: HueNetTek_5G , RSSI: -31 , Secured: y
==============================================================
[WFM] Unknown => # 3
[WFM] SSID: HueNetTek , RSSI: -35 , Secured: y
==============================================================
[WFM]   Known => # 4
[WFM] SSID: HueNet2 , RSSI: -45 , Secured: y
==============================================================
[WFM] Unknown => # 5
[WFM] SSID: HueNet2_5G , RSSI: -55 , Secured: y
==============================================================
[WFM] Unknown => # 6
[WFM] SSID: SmartRG-02a2 , RSSI: -74 , Secured: y
==============================================================
[WFM] Unknown => # 7
[WFM] SSID: Linksys00043 , RSSI: -76 , Secured: y
==============================================================
[WFM] Unknown => # 8
[WFM] SSID:  , RSSI: -79 , Secured: y
==============================================================
[WFM] Unknown => # 9
[WFM] SSID: ESP151CD5 , RSSI: -81 , Secured: y
==============================================================
[WFM] Unknown => # 10
[WFM] SSID: FishTank , RSSI: -84 , Secured: y
==============================================================
[WFM] Unknown => # 11
[WFM] SSID: Guest5655 , RSSI: -84 , Secured: y
==============================================================
[WFM] Unknown => # 12
[WFM] SSID:  , RSSI: -84 , Secured: y
==============================================================
[WFM] Unknown => # 13
[WFM] SSID: SmartRG-02a2-5G , RSSI: -85 , Secured: y
==============================================================
[WFM] Unknown => # 14
[WFM] SSID:  , RSSI: -86 , Secured: y
==============================================================
[WFM] Unknown => # 15
[WFM] SSID: El khoury , RSSI: -87 , Secured: y
==============================================================
[WFM] Unknown => # 16
[WFM] SSID:  , RSSI: -88 , Secured: y
==============================================================
[WFM] Unknown => # 17
[WFM] SSID:  , RSSI: -88 , Secured: y
==============================================================
[WFM] Unknown => # 18
[WFM] SSID:  , RSSI: -88 , Secured: y
==============================================================
[WFM] Unknown => # 19
[WFM] SSID:  , RSSI: -90 , Secured: n
==============================================================
[WFM] Unknown => # 20
[WFM] SSID:  , RSSI: -91 , Secured: y
==============================================================
[WFM] Unknown => # 21
[WFM] SSID: JAC DM , RSSI: -95 , Secured: y
==============================================================
[WFM] Unknown => # 22
[WFM] SSID: Home , RSSI: -99 , Secured: y
==============================================================
[WFM] [run] Connecting SSID:  HueNet2 , Best dB:  -45
RTL8721D[Driver]: set ssid [HueNet2] 
RTL8721D[Driver]: rtw_set_wpa_ie[1160]: AuthKeyMgmt = 0x2 
RTL8721D[Driver]: rtw_restruct_sec_ie[4225]: no pmksa cached 
RTL8721D[Driver]: start auth to 60:38:e0:e2:eb:e1
RTL8721D[Driver]: auth alg = 2
RTL8721D[Driver]: 
OnAuthClient:algthm = 0, seq = 2, status = 0, sae_msg_len = 0
RTL8721D[Driver]: auth success, start assoc
RTL8721D[Driver]: association success(res=1)
RTL8721D[Driver]: ClientSendEAPOL[1624]: no use cache pmksa 
RTL8721D[Driver]: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4)
RTL8721D[Driver]: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
Interface 0 IP address : 192.168.2.78[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet2 , IP:  192.168.2.78
[WFM] WiFi connected after time:  1
[WFM] SSID: HueNet2 ,RSSI= -47
[WFM] IP address: 192.168.2.78
HHH

10. WiFiMulti on PORTENTA_H7_M7

The following are debug terminal output when running example WiFiMulti on PORTENTA_H7_M7

10.1 First time => OK

Starting WiFiMulti on PORTENTA_H7_M7
WiFiMulti_Generic v1.2.2
[WFM] [addAP] add SSID: HueNet1
[WFM] [addAP] add SSID: HueNet2
Connecting WiFi...
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 6
==============================================================
[WFM] Unknown => # 0
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: HueNetTek , RSSI: -32 , Secured: y
==============================================================
[WFM] Unknown => # 1
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: SmartRG-02a2 , RSSI: -77 , Secured: y
==============================================================
[WFM]   Known => # 2
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: HueNet1 , RSSI: -38 , Secured: y
==============================================================
[WFM] Unknown => # 3
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: Linksys00043 , RSSI: -77 , Secured: y
==============================================================
[WFM]   Known => # 4
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: HueNet2 , RSSI: -55 , Secured: y
==============================================================
[WFM] Unknown => # 5
[WFM] F1:9:E3:66:90:3C
[WFM] SSID: HueNet , RSSI: -33 , Secured: y
==============================================================
[run] Connecting BSSID: [WFM] F1:9:E3:66:90:3C
[WFM] SSID:  HueNet1 , Best dB:  -38
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet1 , IP:  192.168.2.77

WiFi connected, IP address: 192.168.2.77

10.2 Lost WiFi => Scan and auto-reconnect

WiFi lost. Trying to scan and reconnect
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 9
==============================================================
[WFM]   Known => # 0
[WFM] E6:D:11:2A:C3:E4
[WFM] SSID: HueNet2 , RSSI: -54 , Secured: y
==============================================================
[WFM] Unknown => # 1
[WFM] E6:D:11:2A:C3:E4
[WFM] SSID: Guest5655 , RSSI: -86 , Secured: y
==============================================================
[WFM] Unknown => # 2
[WFM] E6:D:11:2A:C3:E4
[WFM] SSID: DECO-5655 , RSSI: -86 , Secured: y
==============================================================
[WFM] Unknown => # 3
[WFM] E6:D:11:2A:C3:E4
[WFM] SSID: El khoury , RSSI: -84 , Secured: y
==============================================================
[WFM] Unknown => # 4
[WFM] E6:D:11:2A:C3:E4
[WFM] SSID:  , RSSI: -82 , Secured: y
==============================================================
[WFM] Unknown => # 5
[WFM] E6:D:11:2A:C3:E4
[WFM] SSID:  , RSSI: -83 , Secured: y
==============================================================
[WFM] Unknown => # 6
[WFM] E6:D:11:2A:C3:E4
[WFM] SSID: HueNet , RSSI: -42 , Secured: y
==============================================================
[WFM] Unknown => # 7
[WFM] E6:D:11:2A:C3:E4
[WFM] SSID: HueNetTek , RSSI: -37 , Secured: y
==============================================================
[WFM] Unknown => # 8
[WFM] E6:D:11:2A:C3:E4
[WFM] SSID: SmartRG-02a2 , RSSI: -76 , Secured: y
==============================================================
[run] Connecting BSSID: [WFM] E6:D:11:2A:C3:E4
[WFM] SSID:  HueNet2 , Best dB:  -54
[WFM] [run] Connecting done.
[WFM] [run] SSID:  HueNet2 , IP:  192.168.2.77
[WFM] WiFi connected after time:  1
[WFM] SSID: HueNet2 ,RSSI= -53
[WFM] IP address: 192.168.2.77

11. WiFiMulti on RP2040W

The following are debug terminal output when running example WiFiMulti_RP2040W on RASPBERRY_PI_PICO_W using CYW43439 WiFi

10.1 First time => OK

Starting WiFiMulti on RASPBERRY_PI_PICO_W
WiFiMulti_Generic v1.2.2
[WFM] [addAP] add SSID: HueNet1
[WFM] [addAP] add SSID: HueNet2
[WFM] [addAP] add SSID: ssid_from_AP_1
[WFM] [addAP] add SSID: ssid_from_AP_2
[WFM] [addAP] add SSID: ssid_from_AP_3
Connecting WiFi...
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 15
[run] Connecting BSSID: [WFM] EE:EE:EE:EE:EE:EE
[WFM] SSID:  HueNet1 , Best dB:  -62
[WFM] [run] Connecting done.

WiFi connected, SSID: HueNet1, IP address: 192.168.2.180
[WFM] Client connected, Local IP =  192.168.2.180

H[WFM] Client connected, Local IP =  192.168.2.180
H[WFM] Connection failed. Local IP =  (IP unset)

WiFi lost. Call connectMultiWiFi in loop
WiFi lost. Trying to scan and reconnect
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 9
[run] Connecting BSSID: [WFM] EE:EE:EE:EE:EE:EE
[WFM] SSID:  HueNet2 , Best dB:  -62
[WFM] [run] Connecting done.
[WFM] WiFi connected after time:  1
[WFM] SSID: HueNet2 ,RSSI= 0
[WFM] IP address: 192.168.2.180
H[WFM] Client connected, Local IP =  192.168.2.180

10.2 Lost WiFi => Scan and auto-reconnect

H[WFM] Connection failed. Local IP =  (IP unset)

WiFi lost. Call connectMultiWiFi in loop
WiFi lost. Trying to scan and reconnect
[WFM] [run] Scan done
[WFM] [run] Number of Networks found: 9
[run] Connecting BSSID: [WFM] EE:EE:EE:EE:EE:EE
[WFM] SSID:  HueNet2 , Best dB:  -62
[WFM] [run] Connecting done.
[WFM] WiFi connected after time:  1
[WFM] SSID: HueNet2 ,RSSI= 0
[WFM] IP address: 192.168.2.180
H[WFM] Client connected, Local IP =  192.168.2.180
H[WFM] Connection failed. Local IP =  (IP unset)

Debug

Debug is enabled by default on Serial. Debug Level from 0 to 4. To disable, change the WIFIMULTI_LOGLEVEL to 0

// Use this to output debug msgs to Serial
#define DEBUG_WIFI_MULTI_GENERIC_PORT       Serial

// Use this to disable all output debug msgs
// Debug Level from 0 to 4
#define _WIFIMULTI_LOGLEVEL_                2

Troubleshooting

If you get compilation errors, more often than not, you may need to install a newer version of the board's core, applying Libraries' Patches, Packages' Patches or this library latest version.

Issues

Submit issues to: WiFiMulti_Generic issues

TO DO

  1. Bug Searching and Killing
  2. Add support to megaAVR nboards using MegaCoreX megaAVR core

DONE

  1. Add support to Arduino SAMD21, Adafruit SAMD21/SAMD51, Seeeduino SAMD21/SAMD51
  2. Add support to nRF52-based boards
  3. Add support to SAM DUE.
  4. Add support to all STM32F/L/H/G/WB/MP1.
  5. Add support to WiFiNINA using WiFiNINA_Generic library
  6. Add support to WiFiEspAT library.
  7. Add support to Arduino Nano RP2040 Connect using Arduino mbed OS for Nano boards.
  8. Add support to RP2040-based boards, such as RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040, using Earle Philhower's arduino-pico core.
  9. Add support to RP2040-based boards, such as RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040, using Arduino-mbed mbed_rp2040 core.
  10. Optimize library code and examples by using reference-passing instead of value-passing.
  11. Add support to ESP32-based boards including new ESP32-S3 and ESP32_C3
  12. Add support to ESP8266-based boards
  13. Add support to Portenta_H7 using Murata WiFi
  14. Add support to RTL8720DN using built-in 2.4GHz or 5GHz WiFi with Realtek AmebaD core
  15. Add support to Arduino SAMD using WiFi101 (MKR1000, MKR1010, etc.)
  16. Add support to Seeed XIAO RP2020, SAMD using WiFi101, WiFiNINA_Generic or WiFiEspAT
  17. Add support to Arduino megaAVR boards with Arduino core (UNO WiFi Rev2 using WiFi101, Nano Every using WiFi101, WiFiNINA_Generic or WiFiEspAT)
  18. Add support to CO2 Ampel SAMD board using WiFi101, WiFiNINA_Generic or WiFiEspAT
  19. Add support to STM32 boards with STM32duino Maple core using WiFi101, WiFiNINA_Generic or WiFiEspAT
  20. Add support to Sparkfun SAMD board using WiFi101, WiFiNINA_Generic or WiFiEspAT
  21. Add support to Industruino SAMD using WiFi101, WiFiNINA_Generic or WiFiEspAT
  22. Add support to Tlera Corp STM32WB boards (Firefly-WB55RG, Nucleo-WB55RG, etc.) using WiFi101, WiFiNINA_Generic or WiFiEspAT
  23. Add support to Maixduino boards using WiFi101, WiFiNINA_Generic or WiFiEspAT
  24. Add support to Arduino, Sparkfun, Adafruit, etc. AVR boards (Mega, 32U4, etc.). To use LibraryPatches for ArduinoSTL library
  25. Add support to RASPBERRY_PI_PICO_W using CYW43439 WiFi with Earle Philhower's arduino-pico core v2.4.0+
  26. Workaround for RP2040W WiFi.status() bug using ping()
  27. Add astyle using allman style. Restyle the library

Contributions and Thanks

Many thanks for everyone for bug reporting, new feature suggesting, testing and contributing to the development of this library.

  1. Based on the Ivan Grokhotkov's ESP8266 WiFi library.
  2. Based on the Me No Dev's ESP32 WiFi library.
  3. Thanks to Juraj Andrássy to request in WiFiMulti? #17 and the WiFiEspAT library
igrr
⭐️ Ivan Grokhotkov
 me-no-dev
⭐️ Me No Dev
 jandrassy
⭐️ Juraj Andrássy

Contributing

If you want to contribute to this project:

  • Report bugs and errors
  • Ask for enhancements
  • Create issues and pull requests
  • Tell other people about this library

License

  • The library is licensed under GPLv3

Copyright

Copyright (c) 2022- Khoi Hoang

About

Simple MultiWiFi library to adapt ESP32/ESP8266 MultiWiFi of WiFi libraries to all other WiFi modules and libraries. Currently supporting ESP32, ESP8266, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano-RP2040-Connect, RASPBERRY_PI_PICO, RASPBERRY_PI_PICO_W, etc.) boards using WiFi, such as WiFiNINA, WiFi101, CYW43…

Topics

esp8266 teensy esp32 stm32 wifi samd nrf52 mega2560 wifinina esp-at megaavr sam-due multi-wifi rp2040 portentah7 raspberry-pi-pico nano-rp2040-connect wifinina-generic raspberry-pi-pico-w cyw43439

Resources

Readme

License

GPL-3.0 license
Activity

Stars

10 stars

Watchers

2 watching

Forks

3 forks
Report repository

Releases 6

v1.2.2 : Better workaround for WiFi.status() bug using ping() to local gateway Latest
Aug 17, 2022
+ 5 releases

Packages

No packages published

Contributors 2

Languages