2024.6.0

GDO blaQ

• New Security+1.0 with smart panel protocol option. Users with a Security+1.0 opener (purple learn button) and a digital wall panel such as the 888/889LM or Chamberlain 41A7928-3 should select this option (from the device's internal web page) after initial setup. This disables the wall panel emulator in the GDO blaQ and instructs the blaQ to listen for status pings from your smart wall button.
• Australia/NZ compatibility - Toggle-only option. Chamberlain and Merlin garage openers in this region do not respond to close commands over the serial bus, presumably because they also do not require the obstruction sensor/safety-beam to verify that the door is clear. We work around this by emulating the press of the toggle button. Australia and New Zealand users who are not able close the garage door using default settings should enable the Toggle only option (from the device's internal web page) to instruct the blaQ to emulate toggle presses instead of using the discrete open/close commands. This is not needed on North American garage openers.
• Enhancements to reading and parsing data packets from the GDO serial bus.
• Enhancements to transmitting/retrying data packet transmission on the GDO serial bus.

Project versions updated

• garage-door-gdov2-Q: 1.2.0