Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

DT: Disable i2c0 #22

Closed
lategoodbye opened this issue Nov 15, 2017 · 1 comment
Closed

DT: Disable i2c0 #22

lategoodbye opened this issue Nov 15, 2017 · 1 comment
Assignees
@lategoodbye
Labels
bug

Comments

@lategoodbye
Copy link
Owner

The GPU firmware of the Raspberry Pi 3 uses i2c0 to communicate to the FXL6408 gpio expander. It is a bad idea to also use this interface from the ARM side. So avoid any conflict by disabling it.

Please look at anholt/linux#89 for any further details.
@lategoodbye lategoodbye self-assigned this Nov 15, 2017
lategoodbye pushed a commit that referenced this issue Aug 16, 2019
@axboe
loop: set PF_MEMALLOC_NOIO for the worker thread
d0a255e 
A deadlock with this stacktrace was observed.

The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio
shrinker and the shrinker depends on I/O completion in the dm-bufio
subsystem.

In order to fix the deadlock (and other similar ones), we set the flag
PF_MEMALLOC_NOIO at loop thread entry.

PID: 474    TASK: ffff8813e11f4600  CPU: 10  COMMAND: "kswapd0"
   #0 [ffff8813dedfb938] __schedule at ffffffff8173f405
   #1 [ffff8813dedfb990] schedule at ffffffff8173fa27
   #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec
   #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186
   #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f
   #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8
   #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81
   #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio]
   #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio]
   #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio]
  #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce
  #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778
  #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f
  #13 [ffff8813dedfbec0] kthread at ffffffff810a8428
  #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242

  PID: 14127  TASK: ffff881455749c00  CPU: 11  COMMAND: "loop1"
   #0 [ffff88272f5af228] __schedule at ffffffff8173f405
   #1 [ffff88272f5af280] schedule at ffffffff8173fa27
   #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e
   #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5
   #4 [ffff88272f5af330] mutex_lock at ffffffff81742133
   #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio]
   #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd
   #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778
   #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34
   #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8
  #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3
  #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71
  #12 [ffff88272f5af760] new_slab at ffffffff811f4523
  #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5
  #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b
  #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3
  #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3
  #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs]
  #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994
  #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs]
  #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop]
  #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop]
  #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c
  #23 [ffff88272f5afec0] kthread at ffffffff810a8428
  #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
lategoodbye pushed a commit that referenced this issue Sep 1, 2019
@Stefan-Schmidt
ieee802154: hwsim: unregister hw while hwsim_subscribe_all_others fails
de166bb 
KASAN report this:

kernel BUG at net/mac802154/main.c:130!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 0 PID: 19932 Comm: modprobe Not tainted 5.1.0-rc6+ #22
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ieee802154_free_hw+0x2a/0x30 [mac802154]
Code: 55 48 8d 57 38 48 89 e5 53 48 89 fb 48 8b 47 38 48 39 c2 75 15 48 8d 7f 48 e8 82 85 16 e1 48 8b 7b 28 e8 f9 ef 83 e2 5b 5d c3 <0f> 0b 0f 1f 40 00 55 48 89 e5 53 48 89 fb 0f b6 86 80 00 00 00 88
RSP: 0018:ffffc90001c7b9f0 EFLAGS: 00010206
RAX: ffff88822df3aa80 RBX: ffff88823143d5c0 RCX: 0000000000000002
RDX: ffff88823143d5f8 RSI: ffff88822b1fabc0 RDI: ffff88823143d5c0
RBP: ffffc90001c7b9f8 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffff4
R13: ffff88822dea4f50 R14: ffff88823143d7c0 R15: 00000000fffffff4
FS: 00007ff52e999540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fdc06dba768 CR3: 000000023160a000 CR4: 00000000000006f0
Call Trace:
 hwsim_add_one+0x2dd/0x540 [mac802154_hwsim]
 hwsim_probe+0x2f/0xb0 [mac802154_hwsim]
 platform_drv_probe+0x3a/0x90
 ? driver_sysfs_add+0x79/0xb0
 really_probe+0x1d4/0x2d0
 driver_probe_device+0x50/0xf0
 device_driver_attach+0x54/0x60
 __driver_attach+0x7e/0xd0
 ? device_driver_attach+0x60/0x60
 bus_for_each_dev+0x68/0xc0
 driver_attach+0x19/0x20
 bus_add_driver+0x15e/0x200
 driver_register+0x5b/0xf0
 __platform_driver_register+0x31/0x40
 hwsim_init_module+0x74/0x1000 [mac802154_hwsim]
 ? 0xffffffffa00e9000
 do_one_initcall+0x6c/0x3cc
 ? kmem_cache_alloc_trace+0x248/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7ff52e4a2839
Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffffa7b3c08 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 00005647560a2a00 RCX: 00007ff52e4a2839
RDX: 0000000000000000 RSI: 00005647547f3c2e RDI: 0000000000000003
RBP: 00005647547f3c2e R08: 0000000000000000 R09: 00005647560a2a00
R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000
R13: 00005647560a2c10 R14: 0000000000040000 R15: 00005647560a2a00
Modules linked in: mac802154_hwsim(+) mac802154 [last unloaded: mac802154_hwsim]

In hwsim_add_one, if hwsim_subscribe_all_others fails, we
should call ieee802154_unregister_hw to free resources.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: f25da51 ("ieee802154: hwsim: add replacement for fakelb")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
lategoodbye pushed a commit that referenced this issue Mar 11, 2022
@suresh2514 @davem330
net-sysfs: add check for netdevice being present to speed_show
4224cfd 
When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.

    [  755.549084] mlx5_core 0000:12:00.1: Shutdown was called
    [  756.404455] mlx5_core 0000:12:00.0: Shutdown was called
    ...
    [  757.937260] BUG: unable to handle kernel NULL pointer dereference at           (null)
    [  758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280

    crash> bt
    ...
    PID: 12649  TASK: ffff8924108f2100  CPU: 1   COMMAND: "amsd"
    ...
     #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
        [exception RIP: dma_pool_alloc+0x1ab]
        RIP: ffffffff8ee11acb  RSP: ffff89240e1a3968  RFLAGS: 00010046
        RAX: 0000000000000246  RBX: ffff89243d874100  RCX: 0000000000001000
        RDX: 0000000000000000  RSI: 0000000000000246  RDI: ffff89243d874090
        RBP: ffff89240e1a39c0   R8: 000000000001f080   R9: ffff8905ffc03c00
        R10: ffffffffc04680d4  R11: ffffffff8edde9fd  R12: 00000000000080d0
        R13: ffff89243d874090  R14: ffff89243d874080  R15: 0000000000000000
        ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
    #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
    #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
    #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
    #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
    #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
    #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
    #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
    #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
    #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
    #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
    #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
    #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
    #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
    #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
    #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
    #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
    #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92

    crash> net_device.state ffff89443b0c0000
      state = 0x5  (__LINK_STATE_START| __LINK_STATE_NOCARRIER)

To prevent this scenario, we also make sure that the netdevice is present.

Signed-off-by: suresh kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
@6by9
Copy link

6by9 commented Jul 23, 2024

I was just casting an eye over open issues here.

The firmware hasn't used BSC0 for the GPIO expander and SMPS since Jan 2017.
We're now relying on using BSC0 from the kernel for libcamera and driving the DSI touchscreen through the DRM subsystem.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@lategoodbye lategoodbye

Labels
bug
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@lategoodbye @6by9