The Vesc Status is an iPhone app written in Objective-C that allows users to track, record, graph, and pull up past ride data, all in the same app.
Users can also record 0-20 acceleration, and view a large fullscreen speedometer, all based on the vesc ERPM data.
Full features include:
- Keep settings for up to 4 boards
- Switch between US and Metric systems
- Push notifications for 20%, 50%, and 100% of battery status
- Acceleration Timer
- Speedometer
- Live time display of 18 data points, including time, distance, speed, battery amps, motor amps, and more
- Graphing with Battery Voltage, Battery Amps, Motor Amps, FET Temp, and Speed
- Record VESC data into a "session" and pull up past "sessions" in the ride history tab
- You can view current VESC data without recording a session
- Battery meter with percentage
- [NEW] Record videos with graphical and numerical data embedded in an overlay, all in app
This app is for use with the adafruit UART bluetooth module only.
You can purchase this chip from us, Rocket Boards, at http://www.rocketboards.club/ pre assebled for all VESC versions.
You can also purchase this chip from adafruit un-assembled, and you would need to wire it like this with a jst-6 or jst-7 plug, depending on the version of your VESC:
VESC Pin (RX) -> Adafruit TX
VESC Pin (TX) -> Adafruit RX
VESC Pin (GND) -> Adafruit GND + Adafruit CTS
VESC Pin (VCC) -> Adafruit vIN
The bluetooth communication code for getting current VESC values was written by gpxlBen, and his repository can be found here: https://github.com/gpxlBen/VESC_Logger
If you would like to donate to this project, you can do so here: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=U84LWR2P7WSQN Buying the chips from us is also a way of helping donate towards the development of this software.