Rasbery Pi Zero. Pin Configuration Issue

[rsramki]

Document Links

Documentation of driver

Description of the problem

Please let me know how do i change Pin number for TXEN,RXEN, DIO1,DIO2, NSS, NRST, BUSY, as my HAT which i designed are having different PIN mapping.

Please give your suggestion

Please include this in documentation on how to change the PIN mapping for NSS, RSET,BUSY, RXEN,TXEN.

Additional context

No response

[rsramki]

I am using e220-900m22s Module. There are other Pins provided RXEN , TXEN as Enabling for RX and TX Functionality. Request to get this added in DRIVE Functionality. Also DIO2 is there in SPEC and not mentioned in your Drive. Please add as this can be used.

Reference :https://www.cdebyte.com/products/E220-900M22S/4#Downloads

[libdriver]

When you will receive, set RXEN high, and set low after finished, the same as TXEN.
DIO2 can be used as a general gpio or sending trigger gpio pin.If you use you mcu to control, DIO2 is not used and don't connect it.