Main topics:
- Installing official Images
- Building the image as-is
- Customization
- Setting up a Bundle Server
- Installing Images via USB
- Contributing
This set of recipes is used to build the software images and update bundles for the LXATAC provided by the Linux Automation GmbH. It can be used to derive customized and pre-configured images for use in your infrastructure.
If you came here looking for the most recent software bundle for you LXA TAC and have no actual interest in building your own custom bundles (yet) there is great news for you. You do not have to follow this long README at all! The following commands automatically install the most recent stable software bundle on your TAC:
$ rauc-enable-cert stable.cert.pem
$ rauc install https://downloads.linux-automation.com/lxatac/software/stable/latest/lxatac-core-bundle-base-lxatac.raucb
If that does not work you may want to re-install via USB.
There is also a testing channel with more recent (but less tested) software, that can be enabled using:
$ rauc-enable-cert testing.cert.pem
$ rauc install https://downloads.linux-automation.com/lxatac/software/testing/latest/lxatac-core-bundle-base-lxatac.raucb
To switch back to the stable channel just follow the stable channel's update instructions mentioned above.
If you've made changes to your TACs configuration that you want to preserve,
which are not covered by the default update migration logic,
you can add a list of additional files to migrate to the
/etc/rauc/migrate.d directory:
root@lxatac-00010:~ cat /etc/rauc/migrate.d/git_config.conf
/etc/gitconfig
/home/root/.gitconfig
If that is not enough customization for you then read on to learn how to build fully-custom images for your LXA TAC.
This chapter describes building roughly the same RAUC bundles as the ones available from the official mirror mentioned above.
The image building process will compile a lot of software from source code, including the Linux kernel, language interpreters and development tools. This will take some time, use quite a bit of RAM and consume a lot of storage space. You should preferably do this on a powerful build server with a lot of SSD storage instead of on a laptop.
Obtaining the recipes and required git submodules:
$ git clone --recursive \
https://github.com/linux-automation/meta-lxatac.git
$ cd meta-lxatac
To use bitbake and other commands you will need to source the
OpenEmbedded build environment:
$ source oe-init-build-env
This will set up a build directory and cd into it.
Similar to a python venv it will also add new paths to your PATH
environment variable, making e.g. the bitbake command available.
If you want to share downloaded files with other Yocto projects you can
now specify a DL_DIR in conf/site.conf.
You can also add INHERIT += "rm_work" to clean up build artifacts after
building a package to save storage space and
OPKGBUILDCMD = 'opkg-build -Z gzip -a "-1n"' to use faster compression
while packing packages.
Now you can start the compilation and build the bundle:
$ bitbake lxatac-core-bundle-base
After some time you should end up with with a RAUC bundle in:
$ ls tmp/deploy/images/lxatac/lxatac-core-bundle-base-lxatac.raucb
tmp/deploy/images/lxatac/lxatac-core-bundle-base-lxatac.raucb@
To install the RAUC bundle you will have to enable the devel rauc certificate on your TAC:
# The "private" key for the devel certificate is contained in the public
# meta-lxatac repository, so _anyone_ can create bundles signed with this
# key.
$ rauc-enable-cert devel.cert.pem
Afterwards you can install the bundle on your LXA TAC, using either the web interface or the command line:
root@lxatac-00010:~ rauc install [PATH_TO_BUNDLE].raucb
We will explore two approaches to maintaining a custom layer.
The former provides a cleaner layer layout and the latter makes it easier to
track a specific version of meta-lxatac along with a version of your layer.
Create a new layer inside of the already cloned meta-lxatac next to the
existing meta-lxatac-bsp and meta-lxatac-software e.g.
meta-lxatac-example (a good alternative to example may be your companies
name or your own name):
$ ls meta-lxatac-*
meta-lxatac-bsp:
conf/ recipes-bsp/ recipes-core/ recipes-devtools/ …
meta-lxatac-software:
conf/ files/ recipes-backports/ recipes-core/ …
$ bitbake-layers create-layer --priority 12 meta-lxatac-example
$ ls meta-lxatac-*
meta-lxatac-bsp:
conf/ recipes-bsp/ recipes-core/ recipes-devtools/ …
meta-lxatac-example:
conf/ COPYING.MIT README recipes-example/
meta-lxatac-software:
conf/ files/ recipes-backports/ recipes-core/ …
Note
The --priority 12 argument to bitbake-layers create-layer gives
your custom layer a higher priority than all other layers,
allowing you to override the defaults of all recipes.
Use bitbake-layers show-layers to view the layer priorities.
Populate the layer with sample config files to use when first setting up a build directory and remove the config files that were already generated when building the first time:
$ mkdir -p meta-lxatac-example/conf/templates/default
$ cp meta-lxatac-software/conf/templates/default/*.sample \
meta-lxatac-example/conf/templates/default
# Add "##OEROOT##/../meta-lxatac-example \" to the list of layers:
$ $EDITOR meta-lxatac-example/conf/templates/default/bblayers.conf.sample
$ rm -rv build/conf
And then create a script to set up the build environment including the example layer:
$ sed "s/lxatac-software/lxatac-example/" \
oe-init-build-env > meta-lxatac-example/oe-init-build-env
$ chmod +x meta-lxatac-example/oe-init-build-env
Every layer called meta-lxatac-* (except for -bsp and -software) is
ignored by git via .gitignore, as the intention is for you to maintain your
custom layer as a separate git repository.
Initialize meta-lxatac-example as its own independent git repository:
$ cd meta-lxatac-example
$ git init
$ git add .
$ git commit -m "Initial Commit"
$ cd ..
Next open a new terminal, where you have not yet sourced the build environment and use the new script to initialize the environment:
# In a new terminal window
$ source ./meta-lxatac-example/oe-init-build-env
The build of a new bundle should be rather quick, as we did not change anything yet. See below on how to create custom recipes.
# Should be faster than initial build:
$ bitbake lxatac-core-bundle-base
The next section describes another way to maintain your custom layer, if you have followed the instructions above you can skip right over it to learn how to use your own bundle signing keys and write custom recipes.
Create a new empty meta-lxatac-example layer in a new repository
placed outside the already cloned meta-lxatac repository.
# We can reuse the artifacts we have already built.
# Just store its location in a environment variable for now
$ PREV_SSTATE_DIR=$(readlink -e sstate-cache)
$ test -z $PREV_SSTATE_DIR && echo \
"sstate-cache directory does not exist. " \
"If you have not built meta-lxatac by itself you can skip the moving. " \
"Otherwise please set PREV_SSTATE_DIR manually now"
# Do the same for the download directory
$ PREV_DL_DIR=$(readlink -e downloads)
$ test -z $PREV_DL_DIR && echo \
"downloads directory does not exist. " \
"If you have not built meta-lxatac by itself you can skip the moving. " \
"If you have set DL_DIR in your site.conf you should do so again. "
"Otherwise please set PREV_DL_DIR manually now"
$ cd ${SOMEWHERE_ELSE}
$ mkdir lxatac-yocto
$ cd lxatac-yocto
$ git init
Add meta-lxatac as git submodule and initialize its submodules:
$ git submodule add https://github.com/linux-automation/meta-lxatac.git
$ git submodule update --init --recursive
$ cp meta-lxatac/.gitignore .
$ git add .
$ git commit -m "Initial commit"
Reuse the sstate (build artifacts) from the previous build directory so we do not have to re-build everything, and the download directory so we do not have to re-download when patching an already built package:
$ mkdir build
$ mv ${PREV_SSTATE_DIR} build/sstate-cache
$ mv ${PREV_DL_DIR} build/downloads
Now we will create a new layer for our custom recipes:
$ ls
build/ meta-lxatac/
$ bitbake-layers create-layer --priority 12 meta-lxatac-example
$ ls
build/ meta-lxatac/ meta-lxatac-example/
Note
The --priority 12 argument to bitbake-layers create-layer gives
your custom layer a higher priority than all other layers,
allowing you to override the defaults of all recipes.
Use bitbake-layers show-layers to view the layer priorities.
Populate the layer with sample configs to use when first setting up a build directory:
$ mkdir -p meta-lxatac-example/conf/templates/default
$ cp meta-lxatac/meta-lxatac-software/conf/templates/default/*.sample \
meta-lxatac-example/conf/templates/default
# Add "##OEROOT##/../../meta-lxatac-example \" to the list of layers:
$ $EDITOR meta-lxatac-example/conf/templates/default/bblayers.conf.sample
And then create a script to set up the build environment including the example layer:
$ sed "s|lxatac-software|lxatac-example|; s|poky|meta-lxatac/poky|"
meta-lxatac/oe-init-build-env > oe-init-build-env
$ chmod +x oe-init-build-env
Next open a new terminal, where you have not yet sourced the build environment, and use the new script to initialize the environment:
# In a new terminal window
$ source ./oe-init-build-env
Now that we have a place to put custom configuration and build recipes we can start customizing the generated bundles. The first step is to sign the generated bundles using your own keys.
There are different approaches to storing cryptographic keys.
Some, like using a hardware security module (HSM),
are considered better in terms of security than others.
What we are about to do is an approach from the opposite side of the security
spectrum, that trades security for ease of development by storing the keys
inside the meta-lxatac-example git repository.
First we are going to generate new keys to sign bundles with:
$ mkdir meta-lxatac-example/files
$ openssl req -x509 -newkey rsa:4096 -days 36500 -nodes \
-keyout meta-lxatac-example/files/example.key.pem \
-out meta-lxatac-example/files/example.cert.pem
[…]
Country Name (2 letter code) [AU]:DE
State or Province Name (full name) [Some-State]:
Locality Name (eg, city) []:
Organization Name (eg, company) [Internet Widgets Pty Ltd]:Example Project
Organizational Unit Name (eg, section) []:
Common Name (e.g. server FQDN or YOUR name) []:
Email Address []:
Next you should add the following lines to meta-lxatac-example/conf/layer.conf:
RAUC_KEY_FILE = "${LAYERDIR}/files/example.key.pem"
RAUC_CERT_FILE = "${LAYERDIR}/files/example.cert.pem"
RAUC_KEYRING_FILE = "${LAYERDIR}/files/example.cert.pem"
RAUC_CERT_ENABLE = "example.cert.pem"
Now you should be able to build bundles signed using your own keys, that you can share with other developers using git:
$ bitbake lxatac-core-bundle-base
To install the bundle on a new TAC you will need to deploy and enable the
example.cert.pem on it first:
$ scp meta-lxatac-example/files/example.cert.pem \
root@lxatac-00010:/etc/rauc/certificates-available/example.cert.pem
$ ssh root@lxatac-00010 rauc-enable-cert example.cert.pem
Afterwards you will be able to install the bundle via the commandline or the web interface.
What belongs where?
If you want to add a development tool you need or if you want to change something
in the images that could be useful to the general public, you should consider
changing it directly in meta-lxatac and submitting a pull request instead of
adding a recipe to your custom layer.
A custom layer is mostly useful for software that is not publicly available or configuration that is specific to your deployment.
An example for such a site specific configuration would be to deploy a set of ssh public keys on your LXA TACs:
$ mkdir -p meta-lxatac-example/recipes-core/ssh-keys/files
# Add all public keys that you want to deploy:
$ $EDITOR meta-lxatac-example/recipes-core/ssh-keys/files/authorized_keys.root
# Add a ssh config snippet that makes use of said keys:
$ echo "AuthorizedKeysFile .ssh/authorized_keys /etc/ssh/authorized_keys.%u" >
meta-lxatac-example/recipes-core/ssh-keys/files/ssh-keys.conf
You can now paste the following recipe to
meta-lxatac-example/recipes-core/ssh-keys/ssh-keys.bb:
LICENSE = "CLOSED"
inherit allarch
SRC_URI += "file://authorized_keys.root file://ssh-keys.conf"
do_install() {
install -D -m0600 ${WORKDIR}/authorized_keys.root \
${D}${sysconfdir}/ssh/authorized_keys.root
install -D -m 0644 ${WORKDIR}/ssh-keys.conf \
${D}${sysconfdir}/ssh/sshd_config.d/ssh-keys.conf
}
Next you want to tell bitbake to build the recipe and install the result to the default image:
$ mkdir -p meta-lxatac-example/recipes-core/images
$ cat > meta-lxatac-example/recipes-core/images/lxatac-core-image-base.bbappend <<EOF
IMAGE_INSTALL:append = "\
ssh-keys \
"
EOF
A newly built update bundle should now contain your specified ssh keys:
$ bitbake lxatac-core-bundle-base
Now that you have built your own custom RAUC bundles you may want to deploy
them via your own update bundle server.
For that to work you only need a normal HTTP server that you can deploy your
most recent .raucb bundles to and two small bits of configuration in your
OS images.
$ mkdir -p meta-lxatac-example/recipes-rust/tacd/files/
$ cat > meta-lxatac-example/recipes-rust/tacd/files/02_example.yaml <<EOF
name: example
display_name: Example
description: |
An update channel created for exemplary purposes only.
url: |
http://YOUR_SERVERS_HOSTNAME/PATH_TO_THE.raucb
polling_interval: "24h"
EOF
$ cat > meta-lxatac-example/recipes-rust/tacd/tacd_%.bbappend <<EOF
FILESEXTRAPATHS:prepend := "${THISDIR}/files:"
SRC_URI += "\
file://02_example.yaml \
"
do_install:append() {
install -D -m 0644 ${WORKDIR}/02_example.yaml \
${D}${datadir}/tacd/update_channels/02_example.yaml
}
EOF
Replace YOUR_SERVERS_HOSTNAME and PATH_TO_THE.raucb according to your
servers location and the location of the bundle on the server.
Make sure the configured name matches the name of the certificate file you
have generated, e.g. example.cert.pem in this example, as the existence of
said certificates in the certificates-enabled directory determines if an
update channel is considered active.
This process mirrors the steps we use when we bring up the LXA TAC for the first time, so it should always work, even if the device is completely bricked software-wise and you can no longer deploy any RAUC bundles.
There are two ways to get the firmware files required to revive a bricked TAC.
You can either download them from our Linux Automation GmbH download server, or build them yourself using the recipes in this repository.
Go to the downloads.linux-automation.com
download server and download all of the provided files except for the .raucb
file, which is not required for initial bringup.
Then you are ready to proceed by bringing the device into USB boot mode.
Flashing the LXA TAC from scratch requires a different set of firmware files than installing a RAUC update bundle. To build these files run:
$ bitbake emmc-image emmc-boot-image tf-a-stm32mp
The required files should then appear in tmp/deploy/images/lxatac/.
$ cd tmp/deploy/images/lxatac/
The first step is to bring the LXA TAC into the USB bootmode and load a preliminary bootloader into RAM, which we will use to flash the new image. The USB bootmode is implemented in the SoC bootrom and can thus not be corrupted by software running on the TAC.
Lay the device onto the top side (with the rubber feet facing up). Loosen the four lower screws just one or two threads. Unscrew the four upper screws. You can now lift the part with the rubber feet upwards. Make sure not to put too much strain on the flat flex cable connecting the lower and upper part.
Connect the mainboard to your computer using a USB-C cable.
Identify the (possibly unpopulated) connector P4 in the lower left corner of
the LXA TAC mainboard.
It should have pins GND, BT0, BT1 and BT2 marked on the PCB silkscreen.
These BT? pins correspond to the boot mode pins of the STM32MP1 and are
usually strapped to be LOW, HIGH and LOW respectively,
instructing the SoC to boot from the eMMC.
Pull pin BT1 to GND by using e.g. a set of tweezers to connect it to GND.
This tells the device to boot into the serial update bootrom.
Power on the device. It should show up in lsusb and dmesg on your host
computer.
The device shows up as a STMicroelectronics STM32 BOOTLOADER.
Next you can upload the required pieces of software:
$ lsusb | grep DFU
Bus 001 Device 038: ID 0483:df11 STMicroelectronics STM Device in DFU Mode
# Trusted Firmware-A handles some early hardware setup and then jumps
# into the actual bootloader
$ dfu-util --alt 1 -D tf-a-stm32mp157c-lxa-tac.stm32
# The Barebox bootloader. This command only loads the bootloader into RAM.
# Nothing is being flashed permanently yet.
$ dfu-util --alt 3 -D emmc-boot-image-lxatac.fip
# Start a fastboot command in the background that disables the watchdog
# once the LXA TAC shows up as fastboot device.
# This also stops the automatic boot process.
$ fastboot oem exec "wd -x" &
# Exit the USB Boot mode. The TF-A will run and jump into the Barebox in
# RAM.
$ dfu-util --alt 0 -e
# Write the TF-A and bootloader to one of the two redundant eMMC boot
# partitions. These partitions are not partitions in the normal software
# sense but a special eMMC hardware feature to provide atomic updates.
$ fastboot flash bbu-mmc emmc-boot-image-lxatac.img
# Use the Android fastboot support in Barebox to write the firmware image
# (in the form of an Android sparse image (.simg)) to the eMMC storage.
# This will overwrite the data you've stored there.
$ fastboot flash mmc emmc-image-lxatac.simg
# Boot the newly flashed root filesystem
$ fastboot oem exec boot root-a
The LXA TAC should now boot into the newly flashed image.
Once that is done you can remove the pull-down on BT1.
Disconnect the USB-C cable from the TAC and power cycle the TAC.
One of the LEDs on the DUT Ethernet port should now blink in quick succession.
The LED is connected to the PA13 pin of the STM32MP1, which is used for debug
output from the bootrom. The LED not blinking means that either the wrong boot
mode is selected or there is some hardware fault.
Check the bootmode pins and the 5V and 3.3V LEDs inside of the device.
If you connect the USB-C cable the blinking should stop and the device should
show up on the host. Otherwise there might be something wrong with the USB-C cable.
If fastboot sits idle < waiting for any device >, this can be an error with
the permissions on the USB device. Any easy check for this is to run fastboot
as root using e.g. sudo.
Thank you for thinking about contributing to this project! Changes should be submitted via a Github pull request.
This project uses the Developer's Certificate of Origin 1.1 with the same process as used for the Linux kernel:
Developer's Certificate of Origin 1.1
By making a contribution to this project, I certify that:
(a) The contribution was created in whole or in part by me and I
have the right to submit it under the open source license
indicated in the file; or
(b) The contribution is based upon previous work that, to the best
of my knowledge, is covered under an appropriate open source
license and I have the right under that license to submit that
work with modifications, whether created in whole or in part
by me, under the same open source license (unless I am
permitted to submit under a different license), as indicated
in the file; or
(c) The contribution was provided directly to me by some other
person who certified (a), (b) or (c) and I have not modified
it.
(d) I understand and agree that this project and the contribution
are public and that a record of the contribution (including all
personal information I submit with it, including my sign-off) is
maintained indefinitely and may be redistributed consistent with
this project or the open source license(s) involved.
Then you just add a line (using git commit -s) saying:
Signed-off-by: Random J Developer <random@developer.example.org>
using a known identity (sorry, no anonymous contributions).