Skip to content

Commit

Permalink
test: hsr: Extend the hsr_redbox.sh to have more SAN devices connected
Browse files Browse the repository at this point in the history 
After this change the single SAN device (ns3eth1) is now replaced with
two SAN devices - respectively ns4eth1 and ns5eth1.

It is possible to extend this script to have more SAN devices connected
by adding them to ns3br1 bridge.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: NipaLocal <nipa@local>
  • Loading branch information
Lukasz Majewski authored and NipaLocal committed May 13, 2024
1 parent d4941e0 commit 4ddb1df
Showing 1 changed file with 49 additions and 22 deletions.
71 changes: 49 additions & 22 deletions tools/testing/selftests/net/hsr/hsr_redbox.sh
View file
Original file line number Diff line number Diff line change
Expand Up @@ -8,12 +8,19 @@ source ./hsr_common.sh
do_complete_ping_test()
{
echo "INFO: Initial validation ping (HSR-SAN/RedBox)."
# Each node has to be able each one.
# Each node has to be able to reach each one.
do_ping "${ns1}" 100.64.0.2
do_ping "${ns2}" 100.64.0.1
# Ping from SAN to hsr1 (via hsr2)
# Ping between SANs (test bridge)
do_ping "${ns4}" 100.64.0.51
do_ping "${ns5}" 100.64.0.41
# Ping from SANs to hsr1 (via hsr2) (and opposite)
do_ping "${ns3}" 100.64.0.1
do_ping "${ns1}" 100.64.0.3
do_ping "${ns1}" 100.64.0.41
do_ping "${ns4}" 100.64.0.1
do_ping "${ns1}" 100.64.0.51
do_ping "${ns5}" 100.64.0.1
stop_if_error "Initial validation failed."

# Wait for MGNT HSR frames being received and nodes being
Expand All @@ -23,8 +30,12 @@ do_complete_ping_test()
echo "INFO: Longer ping test (HSR-SAN/RedBox)."
# Ping from SAN to hsr1 (via hsr2)
do_ping_long "${ns3}" 100.64.0.1
# Ping from hsr1 (via hsr2) to SAN
# Ping from hsr1 (via hsr2) to SANs (and opposite)
do_ping_long "${ns1}" 100.64.0.3
do_ping_long "${ns1}" 100.64.0.41
do_ping_long "${ns4}" 100.64.0.1
do_ping_long "${ns1}" 100.64.0.51
do_ping_long "${ns5}" 100.64.0.1
stop_if_error "Longer ping test failed."

echo "INFO: All good."
Expand All @@ -35,22 +46,26 @@ setup_hsr_interfaces()
local HSRv="$1"

echo "INFO: preparing interfaces for HSRv${HSRv} (HSR-SAN/RedBox)."

# |NS1 |
# | |
# | /-- hsr1 --\ |
# | ns1eth1 ns1eth2 |
# |------------------------|
# | |
# | |
# | |
# |------------------------| |-----------|
# | ns2eth1 ns2eth2 | | |
# | \-- hsr2 --/ | | |
# | \ | | |
# | ns2eth3 |--------| ns3eth1 |
# | (interlink)| | |
# |NS2 (RedBOX) | |NS3 (SAN) |
#
# IPv4 addresses (100.64.X.Y/24), and [X.Y] is presented on below diagram:
#
#
# |NS1 | |NS4 |
# | [0.1] | | |
# | /-- hsr1 --\ | | [0.41] |
# | ns1eth1 ns1eth2 | | ns4eth1 (SAN) |
# |------------------------| |-------------------|
# | | |
# | | |
# | | |
# |------------------------| |-------------------------------|
# | ns2eth1 ns2eth2 | | ns3eth2 |
# | \-- hsr2 --/ | | / |
# | [0.2] \ | | / | |------------|
# | ns2eth3 |---| ns3eth1 -- ns3br1 -- ns3eth3--|--| ns5eth1 |
# | (interlink)| | [0.3] [0.11] | | [0.51] |
# |NS2 (RedBOX) | |NS3 (BR) | | NS5 (SAN) |
#
#
# Check if iproute2 supports adding interlink port to hsrX device
ip link help hsr | grep -q INTERLINK
Expand All @@ -59,7 +74,9 @@ setup_hsr_interfaces()
# Create interfaces for name spaces
ip link add ns1eth1 netns "${ns1}" type veth peer name ns2eth1 netns "${ns2}"
ip link add ns1eth2 netns "${ns1}" type veth peer name ns2eth2 netns "${ns2}"
ip link add ns3eth1 netns "${ns3}" type veth peer name ns2eth3 netns "${ns2}"
ip link add ns2eth3 netns "${ns2}" type veth peer name ns3eth1 netns "${ns3}"
ip link add ns3eth2 netns "${ns3}" type veth peer name ns4eth1 netns "${ns4}"
ip link add ns3eth3 netns "${ns3}" type veth peer name ns5eth1 netns "${ns5}"

sleep 1

Expand All @@ -70,21 +87,31 @@ setup_hsr_interfaces()
ip -n "${ns2}" link set ns2eth2 up
ip -n "${ns2}" link set ns2eth3 up

ip -n "${ns3}" link set ns3eth1 up
ip -n "${ns3}" link add name ns3br1 type bridge
ip -n "${ns3}" link set ns3br1 up
ip -n "${ns3}" link set ns3eth1 master ns3br1 up
ip -n "${ns3}" link set ns3eth2 master ns3br1 up
ip -n "${ns3}" link set ns3eth3 master ns3br1 up

ip -n "${ns4}" link set ns4eth1 up
ip -n "${ns5}" link set ns5eth1 up

ip -net "${ns1}" link add name hsr1 type hsr slave1 ns1eth1 slave2 ns1eth2 supervision 45 version ${HSRv} proto 0
ip -net "${ns2}" link add name hsr2 type hsr slave1 ns2eth1 slave2 ns2eth2 interlink ns2eth3 supervision 45 version ${HSRv} proto 0

ip -n "${ns1}" addr add 100.64.0.1/24 dev hsr1
ip -n "${ns2}" addr add 100.64.0.2/24 dev hsr2
ip -n "${ns3}" addr add 100.64.0.11/24 dev ns3br1
ip -n "${ns3}" addr add 100.64.0.3/24 dev ns3eth1
ip -n "${ns4}" addr add 100.64.0.41/24 dev ns4eth1
ip -n "${ns5}" addr add 100.64.0.51/24 dev ns5eth1

ip -n "${ns1}" link set hsr1 up
ip -n "${ns2}" link set hsr2 up
}

check_prerequisites
setup_ns ns1 ns2 ns3
setup_ns ns1 ns2 ns3 ns4 ns5

trap cleanup_all_ns EXIT

Expand Down

0 comments on commit 4ddb1df

Please sign in to comment.