Toolchanger for fdm 3d printers
Our Discord server can be found here:
Lineux Toolchanger consist of a suite of 3 parts:
- Lineux - The hardware consisting of the Carriage, Toolhead and Dock
- Btc - The macros handling the toolchange
- Dockslide - Stowable dock to maximise print build
All 3 parts can be used with other systems. Example, Lineux can be used with other toolchanger plugin. Other toolchanger hardware can use Btc macros. Etc...
BOM is here
Configurator is here
Lineux: Released
BTC: Released
Dockslide: Design stage
Dockslide project was kindly supported by Blurolls
Blurolls had also made kit available for Lineux
Instructions/Guides are here
VID-20250102-WA0013.mp4
Toolchange.mp4
https://www.youtube.com/watch?v=U8tMA8A3mtE&t=1s
https://youtu.be/xHsFxVthdLM?si=bTcKz5V0HF7okz2N
This project was developed on a Vzbot 330. Other printers would need slight modifications. We could add support for other printers when there are others who had modded successfully, or when we are able to get a hold of other printers to mod.