Merge pull request arendst#3 from arendst/development

Sync fork

.github/PULL_REQUEST_TEMPLATE.md

@@ -7,7 +7,7 @@
   - [ ] Only relevant files were touched
   - [ ] Only one feature/fix was added per PR and the code change compiles without warnings
   - [ ] The code change is tested and works on Tasmota core ESP8266 V.2.7.4.9
-  - [ ] The code change is tested and works on Tasmota core ESP32 V.1.0.5-rc4
+  - [ ] The code change is tested and works on Tasmota core ESP32 V.1.0.5-rc6
   - [ ] I accept the [CLA](https://github.com/arendst/Tasmota/blob/development/CONTRIBUTING.md#contributor-license-agreement-cla).
 
 _NOTE: The code change must pass CI tests. **Your PR cannot be merged unless tests pass**_

.github/workflows/CI_github_ESP32.yml

@@ -64,6 +64,26 @@ jobs:
         name: firmware
         path: ./build_output/firmware
 
+  tasmota32-core2:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v1
+    - name: Set up Python
+      uses: actions/setup-python@v1
+    - name: Install dependencies
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio
+        platformio upgrade --dev
+        platformio update
+    - name: Run PlatformIO
+      run: |
+        platformio run -e tasmota32-core2
+    - uses: actions/upload-artifact@v2
+      with:
+        name: firmware
+        path: ./build_output/firmware
+
   tasmota32-minimal:
     runs-on: ubuntu-latest
     steps:

.github/workflows/Tasmota_build.yml

@@ -898,6 +898,29 @@ jobs:
         path: ./build_output/firmware
 
 
+  tasmota32-core2:
+    needs: tasmota_pull
+    runs-on: ubuntu-latest
+    continue-on-error: true
+    steps:
+    - uses: actions/checkout@v1
+    - name: Set up Python
+      uses: actions/setup-python@v1
+    - name: Install dependencies
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio
+        platformio upgrade --dev
+        platformio update
+    - name: Run PlatformIO
+      run: |
+        platformio run -e tasmota32-core2
+    - uses: actions/upload-artifact@v2
+      with:
+        name: firmware
+        path: ./build_output/firmware
+
+
   tasmota32-knx:
     needs: tasmota_pull
     runs-on: ubuntu-latest
@@ -1600,11 +1623,10 @@ jobs:
         [ ! -f ./mv_firmware/tasmota32-display.* ] || mv ./mv_firmware/tasmota32-display.* ./firmware/tasmota32/
         [ ! -f ./mv_firmware/tasmota32-web*.* ] || mv ./mv_firmware/tasmota32-web*.* ./firmware/tasmota32/
         [ ! -f ./mv_firmware/tasmota32-odroidgo.* ] || mv ./mv_firmware/tasmota32-odroidgo.* ./firmware/tasmota32/
+        [ ! -f ./mv_firmware/tasmota32-core2.* ] || mv ./mv_firmware/tasmota32-core2.* ./firmware/tasmota32/
         [ ! -f ./mv_firmware/tasmota32-knx.* ] || mv ./mv_firmware/tasmota32-knx.* ./firmware/tasmota32/
         [ ! -f ./mv_firmware/tasmota32* ] || mv ./mv_firmware/tasmota32* ./firmware/tasmota32/languages/
         [ ! -f ./mv_firmware/* ] || mv ./mv_firmware/* ./firmware/tasmota/languages/
-        rm ./firmware/tasmota32/*.gz
-        rm ./firmware/tasmota32/languages/*.gz
         [ ! -f ./tools/Esptool/ESP32/*.* ] || mv ./tools/Esptool/ESP32/*.* ./firmware/tasmota32/ESP32_needed_files/
         [ ! -f ./tools/Esptool/Odroid_go/*.* ] || mv ./tools/Esptool/Odroid_go/*.* ./firmware/tasmota32/Odroid_go_needed_files/
         [ ! -f ./FIRMWARE.md ] || mv -f ./FIRMWARE.md ./README.md

.github/workflows/Tasmota_build_master.yml

@@ -898,6 +898,29 @@ jobs:
         path: ./build_output/firmware
 
 
+  tasmota32-core2:
+    needs: tasmota_pull
+    runs-on: ubuntu-latest
+    continue-on-error: true
+    steps:
+    - uses: actions/checkout@v1
+    - name: Set up Python
+      uses: actions/setup-python@v1
+    - name: Install dependencies
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio
+        platformio upgrade --dev
+        platformio update
+    - name: Run PlatformIO
+      run: |
+        platformio run -e tasmota32-core2
+    - uses: actions/upload-artifact@v2
+      with:
+        name: firmware
+        path: ./build_output/firmware
+
+
   tasmota32-knx:
     needs: tasmota_pull
     runs-on: ubuntu-latest
@@ -1600,11 +1623,10 @@ jobs:
         [ ! -f ./mv_firmware/tasmota32-display.* ] || mv ./mv_firmware/tasmota32-display.* ./firmware/tasmota32/
         [ ! -f ./mv_firmware/tasmota32-web*.* ] || mv ./mv_firmware/tasmota32-web*.* ./firmware/tasmota32/
         [ ! -f ./mv_firmware/tasmota32-odroidgo.* ] || mv ./mv_firmware/tasmota32-odroidgo.* ./firmware/tasmota32/
+        [ ! -f ./mv_firmware/tasmota32-core2.* ] || mv ./mv_firmware/tasmota32-core2.* ./firmware/tasmota32/
         [ ! -f ./mv_firmware/tasmota32-knx.* ] || mv ./mv_firmware/tasmota32-knx.* ./firmware/tasmota32/
         [ ! -f ./mv_firmware/tasmota32* ] || mv ./mv_firmware/tasmota32* ./firmware/tasmota32/languages/
         [ ! -f ./mv_firmware/* ] || mv ./mv_firmware/* ./firmware/tasmota/languages/
-        rm ./firmware/tasmota32/*.gz
-        rm ./firmware/tasmota32/languages/*.gz
         [ ! -f ./tools/Esptool/ESP32/*.* ] || mv ./tools/Esptool/ESP32/*.* ./firmware/tasmota32/ESP32_needed_files/
         [ ! -f ./tools/Esptool/Odroid_go/*.* ] || mv ./tools/Esptool/Odroid_go/*.* ./firmware/tasmota32/Odroid_go_needed_files/
         [ ! -f ./FIRMWARE.md ] || mv -f ./RELEASENOTES.md ./README.md

.github/workflows/stale-actions.yml

@@ -2,13 +2,13 @@ name: "Mark or close stale issues and PRs"
 
 on:
   schedule:
-  - cron: "15 05 * * *"
+  - cron: "30 * * * *"
 
 jobs:
   stale:
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/stale@v3.0.14
+    - uses: actions/stale@v3.0.15
       with:
         repo-token: ${{ secrets.GITHUB_TOKEN }}
         days-before-stale: 25

BUILDS.md

@@ -149,6 +149,7 @@
 | USE_EZORGB            | - | - | - | - | - | - | - |
 | USE_EZORTD            | - | - | - | - | - | - | - |
 | USE_SEESAW_SOIL       | - | - | - | - | - | - | - |
+| USE_TOF10120          | - | - | - | - | - | - | - |
 |                       |   |   |   |   |   |   |   |
 | Feature or Sensor     | minimal | lite | tasmota | knx | sensors | ir | display | Remarks
 | USE_SPI               | - | - | - | - | - | - | x |
@@ -193,6 +194,7 @@
 | USE_RF_SENSOR         | - | - | - | - | x | - | - | AlectoV2 only
 | USE_HRE               | - | - | - | - | x | - | - |
 | USE_A4988_STEPPER     | - | - | - | - | - | - | - |
+| USE_NEOPOOL           | - | - | - | - | - | - | - |
 |                       |   |   |   |   |   |   |   |
 | Feature or Sensor     | minimal | lite | tasmota | knx | sensors | ir | display | Remarks
 | USE_DISPLAY           | - | - | - | - | - | - | x |

CHANGELOG.md

@@ -3,7 +3,23 @@ All notable changes to this project will be documented in this file.
 
 ## [Unreleased] - Development
 
-## [9.2.0.3]
+## [9.2.0.4]
+### Added
+- Function ``AddLog`` to provide logging for up to 128 (LOGSZ) characters to save stack space
+- Commands ``ChannelRemap``, ``MultiPWM``, ``AlexaCTRange``, ``PowerOnFade``, ``PWMCT``, ``WhiteBlend`` and ``VirtualCT`` as synonyms for ``SetOption37, 68, 82, 91, 92, 105`` and ``106``
+- Commands ``ZbNameKey``, ``ZbDeviceTopic``, ``ZbNoPrefix``, ``ZbEndpointSuffix``, ``ZbNoAutoBind`` and ``ZbNameTopic`` as synonyms for ``SetOption83, 89, 100, 101, 110`` and ``112``
+- Commands ``ZbNoAutoBind``, ``ZbReceivedTopic`` and ``ZbOmitDevice`` as synonyms for ``SetOption116, 118`` and ``119``
+- Commands ``BuzzerActive`` and ``BuzzerPwm`` as synonyms for ``SetOption67`` and ``111``
+- Support for ESP32 ``Module 5`` Wireless Tag Eth01 (#9496)
+- Support trailing silence in buzzer tune (#10694)
+- Command ``L1MusicSync <0|Off>|<1|On>|<2|Toggle>, 1..10, 1..100>`` to control Sonoff L1 Music Sync mode sensitivity and speed (#10722)
+- Command ``Speed2`` to control a once off fade (#10741)
+- Zigbee command ``SetOption120 1`` or ``ZbEndpointTopic 1`` to add the endpoint as suffix in topic when using ``SetOption89 1``
+
+### Changed
+- Maximum chars in ``AddLog_P`` logging restored from 128 to 700 (MAX_LOGSZ) to solve broken error messages
+
+## [9.2.0.3] 20210122
 ### Added
 - Support for time proportioned (``#define USE_TIMEPROP``) and optional PID (``#define USE_PID``) relay control (#10412)
 - Support rotary encoder on Shelly Dimmer (#10407)
@@ -12,6 +28,14 @@ All notable changes to this project will be documented in this file.
 - Support for up to 4 I2C SEESAW_SOIL Capacitance & Temperature sensors by Peter Franck (#10481)
 - ESP8266 Support for 2MB and up linker files with 1MB and up LittleFS
 - ESP32 support for TLS MQTT using BearSSL (same as ESP8266)
+- Support for 24/26/32/34 bit RFID Wiegand interface (D0/D1) by Sigurd Leuther (#3647)
+- Compile time option ``USE_MQTT_TLS_DROP_OLD_FINGERPRINT`` to drop old (less secure) TLS fingerprint
+- Command ``SetOption40 0..250`` to disable button functionality if activated for over 0.1 second re-introduced
+- Support for SM2135 current selection using GPIO ``SM2135 DAT`` index (#10634)
+- Support for ESP32 ``Module 7`` M5stack core2 16MB binary tasmota32-core2.bin (#10635)
+- Support for Sugar Valley NeoPool Controller by Norbert Richter (#10637)
+- Rule trigger string comparisons for EndsWith ``$>``, StartsWith ``$<`` and Contains ``$|`` (#10538)
+- Support for TOF10120 time of flight sensor by Cyril Pawelko (#10190)
 
 ### Breaking Changed
 - ESP32 switch from default SPIFFS to default LittleFS file system loosing current (zigbee) files
@@ -20,10 +44,12 @@ All notable changes to this project will be documented in this file.
 ### Changed
 - Force initial default state ``SetOption57 1`` to scan wifi network every 44 minutes for strongest signal (#10395)
 - Command ``Sleep 0`` removes any sleep from wifi modem except when ESP32 BLE is active
+- PubSubClient MQTT_SOCKET_TIMEOUT from 15 to 4 seconds
+- Domoticz fixed 2 decimals resolution by user selectable ``TempRes``, ``HumRes`` and ``PressRes`` resolutions
 
 ## [9.2.0.2] 20210105
 ### Added
-- Basic support for ESP32 Odroid Go 16MB binary tasmota32-odroidgo.bin (#8630)
+- Support for ESP32 ``Module 3`` Odroid Go 16MB binary tasmota32-odroidgo.bin (#8630)
 - Command ``CTRange`` to specify the visible CT range the bulb is capable of (#10311)
 - Command ``VirtualCT`` to simulate or fine tune CT bulbs with 3,4,5 channels (#10311)
 - Command ``SetOption118 1`` to move ZbReceived from JSON message and into the subtopic replacing "SENSOR" default (#10353)
@@ -45,7 +71,7 @@ All notable changes to this project will be documented in this file.
 - Replaced RA8876 GPIO selection from ``SPI CS`` by ``RA8876 CS``
 
 ### Changed
-- Maximum chars in AddLog_P logging reduced from 700 to 128 (LOGSZ) to enhance stability
+- Maximum chars in ``AddLog_P`` logging reduced from 700 to 128 (LOGSZ) to enhance stability
 - Disabled ``USE_LIGHT`` light support for ZBBridge saving 17.6kB (#10374)
 
 ## [9.2.0.1] 20201229

I2CDEVICES.md

@@ -90,3 +90,4 @@ Index | Define              | Driver  | Device   | Address(es) | Description
   55  | USE_EZORGB          | xsns_78 | EZORGB   | 0x61 - 0x70 | Color sensor
   55  | USE_EZOPMP          | xsns_78 | EZOPMP   | 0x61 - 0x70 | Peristaltic Pump
   56  | USE_SEESAW_SOIL     | xsns_81 | SEESOIL  | 0x36 - 0x39 | Adafruit seesaw soil moisture sensor
+  57  | USE_TOF10120        | xsns_84 | TOF10120 | 0x52        | Time-of-flight (ToF) distance sensor

RELEASENOTES.md

@@ -56,14 +56,22 @@ The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota
 
 [Complete list](BUILDS.md) of available feature and sensors.
 
-## Changelog v9.2.0.3
+## Changelog v9.2.0.4
 ### Added
 - Command ``CTRange`` to specify the visible CT range the bulb is capable of [#10311](https://github.com/arendst/Tasmota/issues/10311)
+- Command ``L1MusicSync <0|Off>|<1|On>|<2|Toggle>, 1..10, 1..100>`` to control Sonoff L1 Music Sync mode sensitivity and speed [#10722](https://github.com/arendst/Tasmota/issues/10722)
 - Command ``RuleTimer0`` to access all RuleTimers at once [#10352](https://github.com/arendst/Tasmota/issues/10352)
+- Command ``Speed2`` to control a once off fade [#10741](https://github.com/arendst/Tasmota/issues/10741)
 - Command ``VirtualCT`` to simulate or fine tune CT bulbs with 3,4,5 channels [#10311](https://github.com/arendst/Tasmota/issues/10311)
+- Command ``SetOption40 0..250`` to disable button functionality if activated for over 0.1 second re-introduced
 - Command ``SetOption43 1..255`` to control Rotary step (#10407)
 - Command ``SetOption118 1`` to move ZbReceived from JSON message and into the subtopic replacing "SENSOR" default [#10353](https://github.com/arendst/Tasmota/issues/10353)
 - Command ``SetOption119 1`` to remove the device addr from json payload, can be used with zb_topic_fname where the addr is already known from the topic [#10355](https://github.com/arendst/Tasmota/issues/10355)
+- Zigbee command ``SetOption120 1`` or ``ZbEndpointTopic 1`` to add the zigbee endpoint as suffix in topic when using ``SetOption89 1``
+- Commands ``ChannelRemap``, ``MultiPWM``, ``AlexaCTRange``, ``PowerOnFade``, ``PWMCT``, ``WhiteBlend`` and ``VirtualCT`` as synonyms for ``SetOption37, 68, 82, 91, 92, 105`` and ``106``
+- Commands ``ZbNameKey``, ``ZbDeviceTopic``, ``ZbNoPrefix``, ``ZbEndpointSuffix``, ``ZbNoAutoBind`` and ``ZbNameTopic`` as synonyms for ``SetOption83, 89, 100, 101, 110`` and ``112``
+- Commands ``ZbNoAutoBind``, ``ZbReceivedTopic`` and ``ZbOmitDevice`` as synonyms for ``SetOption116, 118`` and ``119``
+- Commands ``BuzzerActive`` and ``BuzzerPwm`` as synonyms for ``SetOption67`` and ``111``
 - Milliseconds to console output [#10152](https://github.com/arendst/Tasmota/issues/10152)
 - Gpio ``Option_a1`` enabling PWM2 high impedance if powered off as used by Wyze bulbs [#10196](https://github.com/arendst/Tasmota/issues/10196)
 - Rotary No Pullup GPIO selection ``Rotary A/B_n`` [#10407](https://github.com/arendst/Tasmota/issues/10407)
@@ -73,15 +81,24 @@ The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota
 - Support for FTC532 8-button touch controller by Peter Franck [#10222](https://github.com/arendst/Tasmota/issues/10222)
 - Support for BS814A-2 8-button touch buttons by Peter Franck [#10447](https://github.com/arendst/Tasmota/issues/10447)
 - Support for up to 4 I2C SEESAW_SOIL Capacitance & Temperature sensors by Peter Franck [#10481](https://github.com/arendst/Tasmota/issues/10481)
+- Support for TOF10120 time of flight sensor by Cyril Pawelko [#10190](https://github.com/arendst/Tasmota/issues/10190)
 - Support for Afrikaans language translations by Christiaan Heerze
 - Support for IR inverted leds using ``#define IR_SEND_INVERTED true`` [#10301](https://github.com/arendst/Tasmota/issues/10301)
 - Support for disabling 38kHz IR modulation using ``#define IR_SEND_USE_MODULATION false`` [#10301](https://github.com/arendst/Tasmota/issues/10301)
 - Support for SPI display driver for ST7789 TFT by Gerhard Mutz [#9037](https://github.com/arendst/Tasmota/issues/9037)
 - Support for time proportioned (``#define USE_TIMEPROP``) and optional PID (``#define USE_PID``) relay control [#10412](https://github.com/arendst/Tasmota/issues/10412)
+- Support for 24/26/32/34 bit RFID Wiegand interface (D0/D1) by Sigurd Leuther [#3647](https://github.com/arendst/Tasmota/issues/3647)
+- Support for SM2135 current selection using GPIO ``SM2135 DAT`` index [#10634](https://github.com/arendst/Tasmota/issues/10634)
+- Support for Sugar Valley NeoPool Controller by Norbert Richter [#10637](https://github.com/arendst/Tasmota/issues/10637)
+- Support for ESP32 ``Module 3`` Odroid Go 16MB binary tasmota32-odroidgo.bin [#8630](https://github.com/arendst/Tasmota/issues/8630)
+- Support for ESP32 ``Module 5`` Wireless Tag Eth01 [#9496](https://github.com/arendst/Tasmota/issues/9496)
+- Support for ESP32 ``Module 7`` M5stack core2 16MB binary tasmota32-core2.bin [#10635](https://github.com/arendst/Tasmota/issues/10635)
 - Support rotary encoder on Shelly Dimmer [#10407](https://github.com/arendst/Tasmota/issues/10407#issuecomment-756240920)
 - Support character `#` to be replaced by `space`-character in command ``Publish`` topic [#10258](https://github.com/arendst/Tasmota/issues/10258)
-- Basic support for ESP32 Odroid Go 16MB binary tasmota32-odroidgo.bin [#8630](https://github.com/arendst/Tasmota/issues/8630)
+- Support trailing silence in buzzer tune [#10694](https://github.com/arendst/Tasmota/issues/10694)
+- Rule trigger string comparisons for EndsWith ``$>``, StartsWith ``$<`` and Contains ``$|`` [#10538](https://github.com/arendst/Tasmota/issues/10538)
 - SPI display driver SSD1331 Color oled by Jeroen Vermeulen [#10376](https://github.com/arendst/Tasmota/issues/10376)
+- Compile time option ``USE_MQTT_TLS_DROP_OLD_FINGERPRINT`` to drop old (less secure) TLS fingerprint
 
 ### Breaking Changed
 - ESP32 switch from default SPIFFS to default LittleFS file system loosing current (zigbee) files
@@ -100,6 +117,8 @@ The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota
 - Logging from heap to stack freeing 700 bytes RAM
 - Disabled ``USE_LIGHT`` light support for ZBBridge saving 17.6kB [#10374](https://github.com/arendst/Tasmota/issues/10374)
 - Force initial default state ``SetOption57 1`` to scan wifi network every 44 minutes for strongest signal [#10395](https://github.com/arendst/Tasmota/issues/10395)
+- PubSubClient MQTT_SOCKET_TIMEOUT from 15 to 4 seconds
+- Domoticz fixed 2 decimals resolution by user selectable ``TempRes``, ``HumRes`` and ``PressRes`` resolutions
 
 ### Fixed
 - Redesign syslog and mqttlog using log buffer [#10164](https://github.com/arendst/Tasmota/issues/10164)

lib/default/Ext-printf/library.properties

@@ -0,0 +1,7 @@
+name=Ext-printf
+version=1.0
+author=Stephan Hadinger
+maintainer=Stephan <stephan.hadinger@gmail.com>
+sentence=Extension of snprintf() and vsnprintf()
+paragraph=This library provides extended types support for snprintf (float, uint64_t)
+architectures=esp8266, esp32

tasmota/support_static_buffer.ino → lib/default/Ext-printf/src/SBuffer.hpp

@@ -237,6 +237,21 @@ typedef class SBuffer {
     return buf2;
   }
 
+  // nullptr accepted
+  static bool equalsSBuffer(const class SBuffer * buf1, const class SBuffer * buf2) {
+    if (buf1 == buf2) { return true; }
+    if (!buf1 && (buf2->len() == 0)) { return true; }
+    if (!buf2 && (buf1->len() == 0)) { return true; }
+    if (!buf1 || !buf2) { return false; }   // at least one buf is not empty
+    // we know that both buf1 and buf2 are non-null
+    if (buf1->len() != buf2->len()) { return false; }
+    size_t len = buf1->len();
+    for (uint32_t i=0; i<len; i++) {
+      if (buf1->get8(i) != buf2->get8(i)) { return false; }
+    }
+    return true;
+  }
+
 protected:
 
   static uint8_t asc2byte(char chr) {
@@ -269,18 +284,3 @@ typedef class PreAllocatedSBuffer : public SBuffer {
     _buf = nullptr;
   }
 } PreAllocatedSBuffer;
-
-// nullptr accepted
-bool equalsSBuffer(const class SBuffer * buf1, const class SBuffer * buf2) {
-  if (buf1 == buf2) { return true; }
-  if (!buf1 && (buf2->len() == 0)) { return true; }
-  if (!buf2 && (buf1->len() == 0)) { return true; }
-  if (!buf1 || !buf2) { return false; }   // at least one buf is not empty
-  // we know that both buf1 and buf2 are non-null
-  if (buf1->len() != buf2->len()) { return false; }
-  size_t len = buf1->len();
-  for (uint32_t i=0; i<len; i++) {
-    if (buf1->get8(i) != buf2->get8(i)) { return false; }
-  }
-  return true;
-}