Poupool is a swimming pool control software.
It is based on Transitions, Pykka and Paho MQTT. The user interface is built using the excellent home automation server openHAB. Though, any MQTT client could be used to interact with the system.
This is meant as a personal project and will likely never be a fully-featured software. However, it would be awesome to see it running somewhere else. Poupool runs on a Raspberry Pi 3 Model B and most of the hardware is COTS (commercial off-the-shelf). If you want more information, feel free to contact me.
Originally, I wanted to experiment with asyncio but finally chose to go with some more traditional approach (actor model and finite state machines).
Poupool currently controls filtration (including backwash), heating (heat pump), pH and chlorination, cover, lights and all the pumps and valves of the system. It is used for an overflow swimming pool so that adds some complexity to the control process (e.g. monitoring of the retention tank water level).
The main interaction with the system is done through modes. Here are some of the main ones:
- eco : cover close, filtration, pH, chlorination and heating are automatic
- standby : cover open, no overflow
- overflow : cover open, overflow, chlorination is forced
- comfort : cover open, no overflow, heating is forced
Several other features are available like a wintering state stiring the pool to avoid as long as possible to have the water freezing, a stiring feature when the cover is closed to dissipate the heat forming just under the cover, the control of a swimming pump and more.
Here is a screenshot of the main menu in openHAB 2.5M1:
Of course, you can use the iOS or Android openHAB clients, write your own HABPanel interface or even use the REST API provided by openHAB.
These are the external dependencies that can be install via pip. You will also need Python 3.5.
Best is to setup a virtual environment.
Frameworks:
- Pykka
- transitions
- paho-mqtt
- astral
Raspberry Pi:
- RPi.GPIO
- adafruit-circuitpython-ads1x15
- adafruit-circuitpython-mcp4725
User interface:
- openHAB 2.5
Development tools:
- ruff
- pytest