vscode-msr for IDEs on Windows/Linux/MacOS

Have you suffered issues below in your daily work?

Find Definition: Unable to jump-to-definition?
- Lack of dependency packages / build , or failed to build?
- IDE/extension often caught some problems?
- Cannot cross multiple languages? C# , C++ , Java/Scala, Python, Proto, etc.
- Cannot cross multiple repositories?
Search Code
- Clumsy and slow in IDE? Too narrow vscode panel to preview?
- Wasting time to click and expand each item?
- Lack of a powerful tool to learn/ramp-up code by yourself ? (filter + stats + compare/analogy).
- What if a colorful + fast glance for all search results + rich and powerful filters?
Replace File Text
- Missed changes to some files(like doc/config) or other languages not loaded in IDE?
- Your replacing tool added or removed the tail empty line ? And cause wrong git diff ?
- Your replacing tool changed your file time even nothing changed?
- What if a fast way to replace? Just reuse the powerful search used above?
Just read code but inefficient ? or insufficient resource on laptop?
- Too slow + hard to prepare environment for IDE to load code? Especially from other teams?
- Must install X GB language plugins?
- Must download Y GB packages to the disk?
- Must build Z GB outputs to the disk (like C#) before you can read code?
- Offer N GB running memory to the official/professional language extensions?

Then it's the light + right tool for you(2~3 MB storage + 1~5 MB running memory) to search + replace file text.

Note: (Temp-toggle or change settings for languages disabled by default settings.)

You Can Start Using this without Doing Anything

You can start search + replace + code mining via mouse/menus + keys + terminals without reading/doing anything except:

Cook doskey/alias if you want to search/replace out of vscode (in CMD/Bash + other IDEs).
- See Best Practice to search/update repo + Get Combined Power.
- Create custom common alias(see difference) once-for-all to auto sync across all vscode + platforms.
For Windows: Trust msr if you cannot get search results in 1~2 seconds for code files <= 10000.
- For WSL: Use short mount paths for WSL to enable clicking result file paths + locate into IDEs.
Adjust output colors of both file paths and matched text with 2 methods.

Supported Platforms

Windows
- x86_64 + x86_32: Version >= Windows XP including MinGW on 64-bit + 32-bit Windows.
- Arm64: Version >= Windows 8.1.
- Cygwin: Version >= Cygwin 5.4.0.
- WSL: Same with Linux below.
Linux
- x86_64 + x86_32: Kernel >= 2.6.32: 64-bit + 32-bit Ubuntu + CentOS + Fedora.
- Arm64: Kernel >= 4.15 (like Ubuntu 18.04).
MacOS
- Arm64: Version >= Darwin 21.1.0.
FreeBSD
- amd64: Version >= FreeBSD 11.0 (older versions may work but not tested).

Features

Search 20000+ code files in 1~3 seconds after first time (10~30+ seconds, SSD maybe faster).
Fast find definitions + references for all types of coding languages across multiple related repositories.
Self-reliance: Learn/Ramp-up faster by yourself -- Code Mining without or with Little Knowledge.
Normal + Extensive Search: Search by hot-keys/menus or typing text, in or out of VSCODE.
Easy + Fast to Search Further or Replace File Text: Just reuse the search command line by an upper arrow.
Powerful + Convenient command alias to search/replace code/config/doc files in/out-of vscode.
Easy + Fast to Get the Best Combined Power of vscode-msr + official language plugins.
Every function is under your control and easy to enable or disable.
Easy to Support New Languages with 2 methods.
Automated command shortcuts on Linux + WSL + 4 types of terminals on Windows.
Simple + flexible config: General Regex of C++,Java,C#,Python.
All just leverage tiny msr+nin EXE without storage/cache, server/service, network, etc.

Screenshot-1: Search Definitions + References for C++ / Python / Java in vscode:

The cooked/dumped alias/doskey Can be used in Many IDEs, Not just VSCode

Cook + Dump script files for other IDEs or system terminals out of vscode.

Since out of vscode, no menus/mouse support, use gfind-xxx/find-xxx to search and replace, see screenshot-2:

More powerful usages + examples see overview doc or just run msr/nin to see color doc (Windows, Linux here) or text doc.

More Freely to Use and Help You More

Auto added msr folder to %PATH% (Windows) or $PATH(Linux) to help your daily file processing.

Default: Auto Check and Download Tools and Add to PATH

If not found msr in %PATH% or $PATH:

Windows: If not found in %PATH% by command "where msr.exe"
- Auto check and download to %USERPROFILE%\msr.exe when launching vscode.
- Add %USERPROFILE% to %PATH% temporarily each time in each newly opened terminal.
Linux/MacOS/FreeBSD: If not found in $PATH by command "which msr"
- Auto check and download to ~/msr when launching vscode.
- Add ~/ to $PATH temporarily each time in each newly opened terminal.

This helps using msr command lines or find-xxx/gfind-xxx outside vscode.

Or Manually Download and Set PATH Value Once And Forever

See manually downloading tool command lines on Windows/Linux/MacOS/FreeBSD.

You can also get downloading command line from MSR-Def-Ref channel in OUTPUT tab.
Delete existing msr/nin if now show command or if you want to update immediately.
- Check location like where msr (Windows) or which msr (Linux/MacOS/FreeBSD).

Adjust Your Color Theme if Result File Path Folder Color is Not Clear

If the color of output result file paths is not clear to read when using default dark-blue color theme.

Adjust Colors Method-1

To adjust the colors, for example, if it's default dark-blue color theme:

Open your vscode user settings file with code or other tools like:
- Windows:
  - code %APPDATA%\Code\User\settings.json
- Linux:
  - code $HOME/.config/Code/User/settings.json
Add or change terminal.ansiBrightBlue like below: (Add outer brackets "{ }" if the file is empty)

"workbench.colorCustomizations": {
  "terminal.ansiBrightBlue": "#5833ff"
}

More details or other color settings follow official vscode doc.

Adjust Colors Method-2

You can set environment variable MSR_COLORS to change color-groups of both file paths and matched text:

Temporarily set env in a terminal/console:
- Windows example for color group of result file paths:
  - set MSR_COLORS=p=Green or set MSR_COLORS=d=Cyan,f=Green
- Linux/MacOS/FreeBSD example:
  - export MSR_COLORS=p=Green or export MSR_COLORS=p=Cyan,f=Green
Temporarily set env in user settings like command above:
- Windows:
  - Add/update msr.cmd.postInitTerminalCommandLine like "set MSR_COLORS=xxx"
- Linux/MacOS/FreeBSD:
  - Add/update msr.bash.postInitTerminalCommandLine like "export MSR_COLORS=xxx"
- Cygwin:
  - Add/update msr.cygwinBash.postInitTerminalCommandLine - "export MSR_COLORS=xxx"
- MinGW:
  - Add/update msr.mingwBash.postInitTerminalCommandLine - "export MSR_COLORS=xxx"

Avoid Security Software Downgrade Search Performance on Windows

If you cannot get search results in 1~2 seconds for just 10000 code files:

Method-1: Follow official Windows doc to add exclusion.
Method-2: Same with using auto-cooked alias trust-exe(run as Administrator in a new CMD window):
- Run command "trust-exe msr,nin" (input exe name or title or path).
  - Auto get paths + use PowerShell "Add-MpPreference -ExclusionPath $exePath".
- You can also use trust-exe to fix git,ssh,bash,node,pip,python,golang etc.

Prefer Precision over Speed when Searching Definitions

You can change the value for small projects which you can prefer precision over speed since it's fast:

Global change: msr.default.preferSearchingSpeedOverPrecision = false.
For a project: msr.{project-folder-Name}.preferSearchingSpeedOverPrecision = false.
For C# code: msr.cs.preferSearchingSpeedOverPrecision = false.

More override settings see: full priority rule.

Make Command Shortcuts to Search or Replace In or Out of VSCODE

Two methods to cook alias files in a second:

Open any file in vscode, right click, choose menu: "Cook general + Dump other alias to scripts".
Or use Command Palette like below to find "msr: Cook xxx" menus and dump scripts:

This will dump each alias/doskey to a script file:

Auto transform each alias/doskey to a script file(name = alias) to help searching or replacing text in or out of vscode.
- For Windows:
  - Transform each doskeys in %USERPROFILE%\msr-cmd-alias.doskeys to a script file.
- For MinGW/Cygwin/WSL + Linux/MacOS/FreeBSD:
  - Auto load each alias in ~/.bashrc + ~/msr-cmd-alias.bashrc and transform to a script file.
Save location: msr.cmdAlias.saveFolder (default location):
- Single alias/doskey file: Save to %USERPROFILE%\ on Windows or ~/ on Linux/MacOS/FreeBSD.
- Multiple script files: Save to %USERPROFILE%\cmdAlias\ on Windows or ~/cmdAlias/ on Linux/MacOS/FreeBSD.

Auto set project specific alias for new terminals in vscode, according to repo .gitignore plus .vscode/settings.json.

If You Want to Remove Command Shortcuts from System when Uninstalling vscode-msr

Windows command to remove registration of doskey file (msr-cmd-alias.doskeys):
- REG DELETE "HKEY_CURRENT_USER\Software\Microsoft\Command Processor" /v Autorun /f
Linux/MacOS/FreeBSD + MinGW/Cygwin/WSL command:
- msr -p ~/.bashrc -t "^source ~/msr-cmd-alias.bashrc" -o "" -R

Best Practice to Update Git Repo and Search Code

Create custom common alias once-for-all to help automate daily work across Windows + Remote SSH hosts + containers.
Please use gpc or gpc-sm/gpc-sm-reset / git-sm-xxx to pull/update your git repository.
Set msr.refreshTmpGitFileListDuration to large value(like 12hours / 3days) if you always use them.
- Run gpc or del-this-tmp-list whenever you need to update git-paths (used by gfind-xxx).
4 methods to solve gfind-xxx drawbacks of possible using outdated tmp-git-paths-list:
- 1(Radical): Set msr.refreshTmpGitFileListDuration with small value like 0second / 2m.
- 2(Normal): Run del-this-tmp-list before gfind-xxx if you added new files, or switched branches, or used gfind-xxx in descendant folders.
- 3(Inaccurate): Use find-xxx which has same results of gfind-xxx most time.
  - For menus: Change msr.useGitFileListToSearchSingleWorkspace from auto to false.
- 4(Inaccurate): Run update-alias to switch to general alias Git_List_Expire for gfind-xxx.

Try to Use gfind-xxx instead of find-xxx alias/doskey

Use gfind-xxx alias/doskey/scripts which uses accurate source file paths by "git ls-files".

This's helpful if got git-exemption-warnings for a git repo.
You can change msr.refreshTmpGitFileListDuration to avoid writing tmp-paths-list too frequently.
- See above best practice of integrating update-repo + search/replace code.
Try rgfind-xxx to search multiple git repositories.
Use msr.useGitFileListToSearchSingleWorkspace for menu search using git file list.
- Default = auto which use git-file-list only when it's a git repo + found git exemptions.
  - If no git exemptions, find-xxx are same with gfind-xxx.
- Set to true if you always want to use gfind-xxx to search.
- Set to false if you frequently hit drawbacks of gfind-xxx + bored of using del-this-tmp-list.
To skip huge dependent git submodules(sub-repos) for a large project/repository:
- Set msr.searchGitSubModuleFolders = false or set it per repo like:
  - msr.{repo-folder-name}.searchGitSubModuleFolders = false.

Cooked Alias Script File Output Types

One Single Alias File

Press F1 if not shown in right-pop menu, then search msr Cook xxx as below:

General command shortcuts
- Click/Choose "Cook general alias to 1 file" to cook general command shortcuts.
- Please re-cook this if added new languages support including fastest adding.
  - Will not auto update if once cooked + nothing changed (like msr.xxx.definition settings).
Project specific shortcuts
- Choose "Cook project specific alias to 1 file" for current git repo.
- Not recommended unless you only work with 1 project.
Notes for both general + specific shortcuts in single file:
- Auto initialized and effect in vscode when opening new terminals:
  - Skip paths Regex: --np "skip-by-git-ignore" (if enabled git-ignore).
  - Skip folders Regex: --nd "default-and-project-exclude"
- System console (CMD/bash) will auto load these doskey/alias when opening new terminals.

Multiple Script Files

Choose menus below: More freely to use (in other script files or nested command lines like pipe)

"Cook scripts: General alias"
"Cook scripts: Project specific alias"
"Cook general + Dump other alias to scripts"

This enables you to use alias/doskeys (like find-def) everywhere like:

Nested commands/pipe like for-loop in CMD/Bash + while-loop, etc.
Script files (like *.cmd + *.bat + *.sh + *.ps1 etc.)
Interactive PowerShell terminal/console (PowerShell cannot use doskey/alias).

Additional Tips

Tip for msr advantage on Windows(including MinGW + Cygwin) + Linux/MacOS/FreeBSD:
- Use "\1" instead of "$1" to avoid conflict if your doskey/alias contains Regex-Replacing:
  - Regex $1 conflicts with doskey macro variables like $1 on Windows.
  - Regex $1 conflicts with bash variables like $1 on Linux/MacOS/FreeBSD.
- Same that using \2 \3 is better than $2 $3 and etc.
For full or relative result file paths:
- Type out-fp to output full file paths of search results.
- Type out-rp to output relative paths.

Many other common shortcuts like (run alias to see all alias/doskeys):

Windows + Linux/MacOS/FreeBSD:
- git shortcuts:
  - Type gpc to pull current branch + gph to push current branch + gfc to fetch current branch.
  - Type gpc-sm/git-sm-reset to update/reset submodules + git-sm-reinit as final fix.
  - Type git-cherry-pick-branch-new-old-commits to apply commits between branches.
Windows CMD only:
- Now auto output forward slash temporarily in VsCode terminals by config msr.xxx.postInitTerminalCommandLine.
  - You can add/remove more MSR_XXX variables like MSR_EXIT / MSR_UNIX_SLASH / MSR_KEEP_COLOR / etc.
- Type win11-ungroup-taskbar to ungroup Windows11 taskbar + win11-group-taskbar to restore/group taskbar on Windows 11.
- Type reload-env to reload environment variables + reset-env to clear and reload them.
- Type add-user-path / add-sys-path / add-tmp-path + del-user-path / del-sys-path / del-tmp-path to add/delete %PATH% values.

Command Shortcuts

After 1-click cooking-alias, you can add/update alias/doskeys in alias file and search/replace text.
Automated command shortcuts on MacOS/FreeBSD/Linux + WSL + 4 types of terminals on Windows to search or mining-code or replace file text.
Use gfind-xxx instead of find-xxx if warned exemptions when initializing new terminals.
You can search in vscode terminal then click the results to open and locate them.
You can also start code-mining or replacing files out of vscode (System terminals or other IDEs).
- Run use-this-alias to load alias/env for current git repo.
If using alias(like find-spring-ref) in a nested command (like for/while-loop or command|pipe), or script files (like *.bat/cmd or *.sh)
- Use full-name (like find-spring-ref.cmd) or full path (like ~/cmdAlias/find-spring-ref).

Custom Alias to Auto Sync Across Local and Remote SSH Hosts plus Docker Containers

Besides normal alias above, you can create custom alias (example + difference) to auto sync across all vscode on all platforms.

Details see Create Custom Common Alias Once and for All in user settings.json for current + future vscode:

msr.commonAliasNameBodyList for all platforms (Windows + MinGW/Cygwin/WSL + Linux/MacOS/FreeBSD).
msr.cmd.commonAliasNameBodyList for Windows only.
msr.bash.commonAliasNameBodyList for MinGW/Cygwin + WSL + Linux/MacOS/FreeBSD.

Try rgfind-xxx to Search Multiple Git Repositories

After cooking alias scripts, you can use rgfind-xxx like rgfind-cpp-ref MySearchWord to recursively search multiple git repositories in a folder.

Difference between rgfind-xxx and gfind-xxx:
- gfind-xxx can only be used in a single git repository, not parent folder of multiple git repositories.
Difference between gfind-xxx and find-xxx (same search results most time):
- find-xxx may waste time on non-repo files thus may not provide accurate results as gfind-xxx.
  - But find-xxx are better than gfind-xxx in scenarios below:
    - New files not in git - gfind-xxx cannot find them, use find-xxx.
    - Switched branches or search-folders or sub-modules(without git-sm-xxx):
      - Run del-this-tmp-list before gfind-xxx, or use find-xxx.
- gfind-xxx / rgfind-xxx auto run git ls-files first to get precise file list save to a tmp file.

Now you can directly use the command shortcuts in/out-of vscode to search + replace like:
find-ndp path1,path2,pathN -t MySearchRegex -x AndPlainText
find-nd -t MySearchRegex -x AndPlainText
find-code -it MySearchRegex -x AndPlainText
find-small -it MySearchRegex -U 5 -D 5 : Show up/down lines.
find-doc -it MySearchRegex -x AndPlainText -l -PAC : Show pure path list.
find-py-def ClassOrMethod -x AndPlainText : Search definition in python files.
find-py-ref MySearchRegex -x AndPlainText : Search references in python files.
find-cpp-ref "class\s+MyClass" -x AndPlainText --np "unit|test" --xp src/ext,src/common -c show command line.
find-java-def MyClass -x AndPlainText --np "unit|test" --xp src/ext,src/common -c show command line.
find-java-ref MyClass --pp "unit|test" -U 3 -D 3 -H 20 -T 10 :  Preview Up/Down lines + Set Head/Tail lines in test.
find-ref OldClassOrMethod -o NewName -j : Just preview changes only.
find-ref OldClassOrMethod -o NewName -R : Replace File Text.
find-spring-ref ABC - find variations of Java Spring member like: ABC / isABC / setABC / getABC.
alias find-pure-ref
malias find- -x ref -H 9
malias "g?find[\w-]*ref"
malias ".*?(find-\S+)=.*" -o "\2"  :  To see all find-xxx alias/doskeys.
list-alias  - list all alias/doskey files of projects.
update-alias - reload common alias/doskeys.
use-this-alias - reload this project alias/doskeys when in vscode; or load by current folder(project) name (see list-alias).
out-rp  - Output relative path for result files.
out-fp  - Output full path.
Add -W to output full path; -I to suppress warnings; -o to replace text, -j to preview changes, -R to replace file text.
You can also create your own command shortcuts in the file: {msr.cmdAlias.saveFolder}\msr-cmd-alias.doskeys
Every time after changes, auto effect for new console/terminal. Run `update-alias` to update current terminal immediately.
See + Use command alias(shortcut) in `MSR-RUN-CMD` on `TERMINAL` tab, or start using in a new command window outside.
(if running `find-xxx` in vscode terminals, you can `click` the search results to open in vscode.)

Switch between General and Project Specific Command Shortcuts

Type commands below in a terminal/console after cooking doskeys/alias:

Type use-this-alias to use project specific alias in terminal (when in a git repo folder).
- Type list-alias to list all files (auto cooked when opening repos in vscode).
Type update-alias to switch to general alias.

Use git-ignore

Open user settings, set msr.useGitIgnoreFile = true (or msr.{repo-folder-name}.useGitIgnoreFile = true)

This use the .gitignore file only in top folder of the project, without other kinds/folders of git-ignore files.
Omit file/folder exemptions (like !not-exclude.txt) as default (will ignore such git exemptions).
- Set msr.omitGitIgnoreExemptions = false to not use git-ignore if found exemptions.
Auto detect and include(search) dot-folders like ".submodules" by config msr.ignorableDotFolderNameRegex.

Parsing result of .gitignore file: see MSR-Def-Ref output channel (with msr.debug = true or launched in debug mode).

Run command "npm run test" in vscode-msr folder if you want to see the translation rule of git-ignore on Windows/Linux/MacOS/FreeBSD.

Check if a Project Can Use git-ignore

Method-1: Set msr.autoCompareFileListsIfUsedGitIgnore = true to auto compare file list at starting (opening projects).
Method-2: Use menu/command-palette of msr.compareFileListsWithGitIgnore to compare file lists if enabled msr.useGitIgnoreFile.

Enable or Disable git-ignore for All Projects or One Project

For all projects: Set msr.useGitIgnoreFile to true or false.
For one project: Add msr.{repo-folder-name}.useGitIgnoreFile = true or false in user settings.

Custom Search Command with Menu

You can add custom search/replace command by adding config msr.xxx.myFindOrReplaceSelectedTextCommand in user settings.json.

Example of using git file list to precisely search C++ code to find pure reference of selected text (%1):
- "msr.cpp.myFindOrReplaceSelectedTextCommand" =
  - "%UseGitFileListToSearch% -f \"\\.(c\\+\\+|cpp|cxx|cc|c)$\" --nt \"^\\s*(#include|/|\\*)|^.{360,}\" -t \"\\b%1\\b\" --xp test,mock,deprecate"
- Or write your own raw command for msr.cpp.myFindOrReplaceSelectedTextCommand =
  - "git ls-files --recurse-submodules > /tmp/tmp-git-file-list && msr --no-check -w /tmp/tmp-git-file-list ..."
Recommended examples using %AutoDecideSkipFolderToSearch% + %FileExt% / %FileExtMap%:
- "msr.cpp.myFindOrReplaceSelectedTextCommand" = "%AutoDecideSkipFolderToSearch% -f %FileExtMap% -t \"\\b%1\\b\" ..."
- "msr.{my-repo}.txt.myFindOrReplaceSelectedTextCommand" =
  - "%AutoDecideSkipFolderToSearch% -f \"\\.c[px]*$\" -t %SelectedWordVariation% ..."

Macro Variables to be Replaced for Custom Search or Replace Command

%FileExtMap% = Extensions like "\\.(c\\+\\+|cpp|cxx|cc|c)$" in config or overrode by your settings.
%FileExt% = Current file extension like "\\.cpp$" (the extension of current file in vscode).
%1 = Placeholder of selected text in vscode.
%UseGitFileListToSearch% = "git ls-files --recurse-submodules > /tmp/tmp-git-file-list && msr --no-check -w /tmp/tmp-git-file-list"
%ProjectsFolders% =
- Current path(".") - if it's a single project/workspace.
- Absolute paths of all projects/workspaces in current vscode, separated by comma(",").
%Skip_Junk_Paths% = Skip_Junk_Paths environment variable in MSR-RUN-CMD of vscode (if enabled git-ignore and no exemptions or omitted exemptions).
- Will be replaced to $Skip_Junk_Paths on Linux/MacOS/FreeBSD.
%AutoDecideSkipFolderToSearch% =
- if ignored/no git-exemptions.
  - msr -rp %ProjectsFolders%" --np "%Skip_Junk_Paths%"
- Otherwise:
  - %UseGitFileListToSearch% (see above).
%SelectedWordVariation% = Replace selected text %1 like below (a bit similar with config msr.reference.autoChangeSearchWord):
- Example: Mouse selection text = m_product_id will search code repo with Regex:
  - \b(m_product_id|is_product_id|get_product_id|set_product_id|has_product_id)\b
- Example: Mouse selection text = getProductId will search code repo with Regex:
  - \b(getProductId|productId|isProductId|setProductId|hasProductId)\b
- Example: Mouse selection text = ProductId will search code repo with Regex:
  - \b(ProductId|productId|isProductId|getProductId|setProductId|hasProductId)\b
- Example: Mouse selection text = GetProductId will search code repo with Regex:
  - \b(GetProductId|ProductId|IsProductId|SetProductId|HasProductId)\b

Other Guide for Custom Search Command

You can set any other command lines like below using find-xxx or gfind-xxx:
- "gfind-file -t \"^\\s*struct\\s+%1\\b\" -f %FileExt% -t \"\\b%1\\b\" ..."
- "msr -rp %ProjectsFolders% --np \"%Skip_Junk_Paths%\" -f %FileExtMap% -t \"\\b%1\\b\" ..."
You can hide the custom search menu by unchecking/setting msr.myFindOrReplaceSelectedTextCommand.menu.visible = true in user settings.
The override rule of config is same with full priority rule like below (from high to low priority):
- msr.my-repo-folder-name.proto.myFindOrReplaceSelectedTextCommand
  - Concrete {Ext} = proto override below.
- msr.bp.myFindOrReplaceSelectedTextCommand
  - General {ExtMap} = bp = bond + proto.

Support Multiple Repositories

Method-1: Use multiple workspace
- Add workspace for each repository in vscode, to have specific git-ignore for each repository.
- Recommended if you want to see the related/dependency files in vscode.
Method-2: Use extra search paths
- Searches extra paths as final resort.
- Recommended if you don't want to see the related/dependency files in vscode..

Enable Finding Definition and References for Unknown Languages

If you want to support unknown languages, do anyone of below:

Set msr.enable.onlyFindDefinitionForKnownLanguages = false in settings.json or un-check it in user settings UI.
See Easy to Support New Languages to add one or two config values.

Easy to Support New Languages

Currently support well for: C#, C++/C, Python, PowerShell, Batch/Bash, Java, etc.

vscode-msr disabled itself finding definition for some languages which has good official extension support:

Change config msr.default.autoDisableFindDefinitionPattern as your need.
You can temporarily toggle enabling this extension when official extension got problems.
Permanently update: Change msr.disable.extensionPattern value.

Two methods to support a new language. (If you're a developer/contributor see here, welcome!)

Open your personal settings file with code or other tools like:

Windows: code %APPDATA%\Code\User\settings.json
Linux: code $HOME/.config/Code/User/settings.json

Take finding definition for batch files (*.bat and *.cmd) as an example (for normal users):

Method-1: Only Add One Extension of the New Language You Want to Support

If you only want to support finding definition for *.bat files other than all batch script (*.bat + *.cmd):

Add lower case extension name: "msr.{extension}.definition" (here {extension} = bat ) into settings.json:

  "msr.bat.definition": "^\\s*:\\s*(%1)\\b|(^|\\s)set\\s+(/a\\s+)?\\\"?(%1)="

See here if you're interested about the explanation of the definition Regex used above and below.

Method-2: Support All Extensions of the New Language by Adding 2 Mandatory Settings

Add lower case language name as you want: "msr.fileExtensionMap.{Name}" (here {Name} = batch ) into settings.json:

  "msr.fileExtensionMap.batch": "bat cmd"

Add Regex match pattern to find definition (lower case name msr.batch.definition):

  "msr.batch.definition": "^\\s*:\\s*(%1)\\b|(^|\\s)set\\s+(/a\\s+)?\\\"?(%1)="

Simplest Way to Add New Finding Alias

Change/Add file extension names to config msr.fileExtensionMapNames:

Examples like: "go py sql php md json xml"
- This will generate finding alias like:
  - find-go / find-go-ref / find-go-def
  - find-py / find-py-ref / find-py-def
  - find-json / find-json-ref
Ignore if found msr.fileExtensionMap.xxx like msr.fileExtensionMap.cs.

Fastest and Easiest Way to Support New Language

For example of Rust language, adding msr.fileExtensionMap.rs = "rs" (like "bat cmd" for msr.fileExtensionMap.batch):

You'll get new command shortcuts like: find-rs + find-rs-ref + find-rs-def to help search/replace or code mining.
This will use the default finding Regex patterns unless you added Rust patterns (see msr.batch.definition / msr.cs.class.definition).
Please re-cook default/general shortcuts to avoid missing default shortcuts when switching from project-specific shortcuts.

Set msr.quiet = false, msr.debug = true will help you tune and debug the config values (Regex patterns).

Other Optional Settings and Full Priority Order of Config Override Rule

See optional settings and overriding rule.

Every Function is Under Your Control and Easy to Change

Hide or Show More Context Menus

Default setting just shows a few of 24 provided context menu items of Plain-text find + Regex find + Sort.

To show or hide more menus, open user settings check/un-check menus like screenshot below:

Set msr.menu.visible = false to hide all context menus of Regex find xxx + Find xxx etc.

Get the Best Combined Power

Most time official extension(like vscode-java) works well, so vscode-msr will disable itself finding definition:
- If found professional extension process is running:
  - vscode-msr will ignore "Go To Definition" from mouse-click or key like F12.
- You can still use vscode-msr by menu or terminal.
If official extension not work, you can toggle enabling vscode-msr temporarily (until reload).

Auto Disable Finding Definition as Default

Default config = msr.cpp.autoDisableFindDefinitionPattern , values is a Regex pattern of process name of professional language extension (like vscode-java).
If you don't want to use this auto-disabling feature, like below (update user settings):
- For C++, add/set empty value msr.cpp.autoDisableFindDefinitionPattern = "".
- For all languages, add/set empty value msr.default.autoDisableFindDefinitionPattern = ""
  - Change config like msr.java.autoDisableFindDefinitionPattern to empty if found.
Accelerate/accurate checking language process like below（C# + Rust):
- msr.cs.languageProcessName = dotnet
- msr.rs.languageProcessName = rust-analyzer
For mapped extension (like: cs/rs/py/cpp/java):
- Check msr.fileExtensionMap.xxx like msr.fileExtensionMap.cs.
- You can add more msr.fileExtensionMap.xxx.

Empower You Temporarily Toggle Finding Definition

For 2 cases when "Go To Definition" by menu or key(F12) or "Ctrl + Mouse Left Click":

Got duplicate results (from both vscode-msr + official extension like vscode-python).
No results found if you disabled vscode-msr via menu or hot-key of "Toggle enable/disable msr".

Then just press Alt+F2 to temporarily toggle Enable/Disable of Finding Definition. Change Alt+F2 if hot-keys conflict.

It's useful when the official/professional plugins got problems:

Temporarily enable vscode-msr when the official language plugins fail.
Temporarily disable vscode-msr when the official language plugins work well.

Note for the toggle:

See workaround if you encounter cases like error impact of vscode-python + vscode-powershell to vscode.
Only impact "find definition", you can still search or replace by menus or command shortcuts.
This is effective until you reload or restart current vscode window. (Permanent changes see settings below.)

This temporarily ignores all other settings like below to enable/disable finding for a language:

msr.enable.onlyFindDefinitionForKnownLanguages
- Known language type means exist "msr.fileExtensionMap.{name}" like "msr.fileExtensionMap.python".
msr.disable.extensionPattern
msr.disable.findDef.extensionPattern
msr.disable.projectRepoFolderNamePattern

There're another 2 ways to toggle besides the hot key (Alt+F2):

Command Palette: Press F1 to open command palette, then type msr temp or msr toggle etc.
Right-Pop-Menu: Change msr.tmpToggleEnableFindingDefinition.menu.visible then use it.

Set quiet mode if you don't want to activate vscode tabs like OUTPUT and TERMINAL.

Disable Finding Definition and References for Specific File Types

msr.disable.extensionPattern

Regex pattern of file name extensions to disable find definition and references.

For example:
- Set tsx?|jsx? for TypeScript and JavaScript files.
- Set py|cs|java|scala for python, C# and Java/Scala files .

Disable Finding Definition for Specific File Types

msr.disable.findDef.extensionPattern like tsx?|jsx?|go|py

Disable Finding References for Specific File Types

msr.disable.findRef.extensionPattern like tsx?|jsx?|go|py

Disable Finding Definition and References for Specific Projects By Root Folder Name

msr.disable.projectRepoFolderNamePattern (case sensitive)

Regex pattern of git root folder name to disable find definition and references functions for specific projects.

For example: ^(Project\d+)$ to disable for D:\Project1 and C:\git\Project2.

Disable Finding Definition or References for All

msr.enable.definition: Set to false or un-check it to disable find definitions function for all types of files.
msr.enable.reference: Set to false or un-check it to disable find references function for all types of files.

Output Forward Slash on Windows for Search Result File Paths

Default: Output forward slash('/') on Windows terminals (like CMD) by setting MSR_UNIX_SLASH=1.
To restore backslash('\') on Windows:
- Change MSR_UNIX_SLASH=0 or change it in config msr.cmd.postInitTerminalCommandLine.

Output Relative Paths or Full Paths

For cooking command alias/shortcuts and using it:
- msr.cookCmdAlias.outputFullPath
- msr.cookCmdAlias.outputRelativePathForLinuxTerminalsOnWindows:
For search output (from menu or auto-triggered re-run when got multiple results):
- msr.searchRelativePathForLinuxTerminalsOnWindows:
  - Set true to help click + open results in vscode for Cygwin/MinGW/WSL terminals on Windows.
- msr.searchRelativePathForNativeTerminals: Enable it to get short paths.
Just add -W to output full paths when you re-use the command line and if it output relative paths.

More Settings like Quiet Mode

This doc listed a few configuration names. Finding more by pressing F1 to Open User settings to change.

Default msr.quiet = true to not activate/show MSR-Def-Ref(in OUTPUT tab) + MSR-RUN-CMD (in TERMINAL tab).
- MSR-Def-Ref shows sorted results after ranking, and specific search commands with time costs.
- MSR-RUN-CMD shows re-running search when got multiple results or finding commands from menu.

Extension Settings If You Want to Change

Usually you don't need to change user settings, however, when necessary:
- Type/paste msr.xxx in vscode UI(like below) or add/update msr.xxx in user settings file:
You can add msr.{repo-folder-name}.xxx in settings file to override all config values, like:
- msr.{repo-folder-name}.useGitIgnoreFile or msr.{repo-folder-name}.skipFolders etc.
Full priority/order: See overriding rule + order.

Note: Check your personal settings (msr.xxx in file) with the latest tuned github settings, especially for Regex patterns.

Repository Name As Config Key Name

In above config name example msr.{repo-folder-name}.xxx (add into user settings file):

Key {repo-folder-name} = git repository folder name (like my-project for D:\code\my-project)
Key must matches Regex "^([\w\.-]+)$":
- You can simply test it like command below (will print "Matched"):
  - msr -t "^([\w\.-]+)$" -z my-project_2.1
- The valid(trimmed) name is also auto displayed in project-alias-file path in vscode terminals.

General/Default Settings Examples

msr.default.maxSearchDepth: Set max search depth when finding definitions or references.
msr.default.codeFiles: Set default Regex pattern for source code files.
msr.descendingSortForVSCode: Descending sort search results for vscode.
msr.descendingSortForConsoleOutput: Descending sort search results for output channel in vscode bottom.
msr.default.skipFolders: Set default/common skip folders Regex pattern.
msr.default.removeLowScoreResultsFactor: Default threshold = 0.8 (of max score) to remove low score results.
msr.default.keepHighScoreResultCount: Default count = -1 (keep all) to keep top high score results.

Auto Set Command Shortcuts for New Terminals

Default behavior(change user settings as you wish):
- msr.initProjectCmdAliasForNewTerminals = true
  - Auto set/initialize command alias/doskeys for newly created terminals:
- msr.skipInitCmdAliasForNewTerminalTitleRegex = PowerShell\\s*Integrated\\s*Console|pwsh$|Java|Debug
  - Not set/initialize command alias/doskeys for terminals of PowerShell Integrated Console and Linux PowerShell etc.
Merge project specific excluded folders from .vscode/settings.json in each project root folder.
- Extract folders from files.exclude and search.exclude by Regex: ^[\w-]+$ after trimming * at head and tail.
- You can disable msr.autoMergeSkipFolders to not auto merge excluded folders.
- You can disable msr.overwriteProjectCmdAliasForNewTerminals to use the existing temp command shortcuts of each project.
Auto switch to CMD console other than Powershell on Windows to use command shortcuts.
- Due to Powershell cannot use doskey command shortcuts. (You can cook command script files then add the script folder to %PATH% or $PATH)

Run use-this-alias for Restored Terminals

Default: Auto run use-this-alias + restore environment variables for "History restored" terminals - due to vscode lost them.

Change config msr.autoRestoreEnvAliasTerminalNameRegex to disable/enable auto running use-this-alias + postInitTerminalCommandLine for restored terminals.

Supported 4 Terminal Types on Windows

Supported various types of terminals: (settings file like: %APPDATA%\Code\User\settings.json on Windows).

Not recommend to set terminal type after vscode 1.56, which is unnecessary since easier to open different terminals.

Only explicitly set terminal on Windows when you caught problems like unable to determine PowerShell or CMD type.

VsCode Official supported terminals like below:

// CMD console:
"terminal.integrated.shell.windows": "C:\\Windows\\System32\\cmd.exe"

// Git Bash(MinGW): Built-in environment variable: MSYSTEM like: MSYSTEM=MINGW64
"terminal.integrated.shell.windows": "C:\\Program Files\\Git\\bin\\bash.exe"

// Ubuntu Bash on Windows (WSL):
"terminal.integrated.shell.windows": "C:\\Windows\\System32\\bash.exe"

Additionally supported by vscode-msr: Cygwin (green install), you can set in your personal settings file like:

// Cygwin Bash. One command to install Cygwin (into a folder no pollution): https://github.com/qualiu/msrTools/blob/master/system/install-cygwin.bat
For Cygwin as main terminal (may obsolete):
"terminal.integrated.shell.windows": "D:\\cygwin64\\bin\\bash.exe"

For Cygwin integration:
"terminal.integrated.profiles.windows": {
        "Cygwin": {
            // "path": "D:\\cygwin64\\Cygwin.bat" // Unable to auto init command alias
            "path": "D:\\my-tools\\cygwin-bash.bat" // Any path contains word 'cygwin' to help identify Cygwin terminal
        }
    }
}

The cygwin-bash.bat content example like below (assume your cygwin at D:\cygwin64):
@REM call d:\my-tools\msrTools\disable-exe-in-PATH.bat grep.exe || exit /b -1
@set CYGWIN_ROOT=D:\cygwin64
@set "PATH=D:\cygwin64\bin;%PATH%"
@bash %*

Use Short Mount Paths for WSL Bash Terminal on Windows

Set /etc/wsl.conf like below to use short mount paths (like /c/ instead of /mnt/c/), may need restart to effect:

[automount]
root = /
options = "metadata"

After changed mounting style from /mnt/c/ to /c/, you can click + locate file paths in vscode (and other IDEs).

Code Mining without or with Little Knowledge

You may need fuzzy code searching for cases like below:

Only got piece of words from others, just human language not the exact name of code (class/method).
Take over a project, or already ramp-up for several days, not easy to get help.

Then you can try code/knowledge mining by yourself with vscode-msr: (after cooking doskey/alias if out of vscode)

Besides the normal "Go To Definition" by menu or key(F12), you can take flexible code mining in vscode terminals/console.

The 40+ shortcuts like find-xxx are convenient wrappers of msr/nin with 70+/30+ composable optional-args (brief Quick-Start at bottom of running msr -h or nin -h).

Code mining examples (run in vscode terminals: like MSR-RUN-CMD or add/open new terminals):

Fuzzy search a class/method: (Try gfind-xxx for precise searching + rgfind-xxx for multi-repos)
- find-def "\w*Keyword\w*You-Heard-or-Knew\w*" -i
  - gfind-def "\w*Keyword\w*You-Heard-or-Knew\w*" -x class --sp "/common/,/lib"
  - gfind-def "\w*Keyword\w*You-Heard-or-Knew\w*" -x struct -k 12
Fuzzy search a class/method, with optional args like ignore case(-i) :
- find-cpp-def "\w*Keyword\w*" -i
- find-cpp-ref "\w*Keyword\w*" -i -x class --xp "test,mock,/obj,/bin/"
- find-ref "class\s+\w*Keyword\w*" -i --nx ";" --sp src/,/lib/
  - gfind-java-ref "class\s+\w*Keyword\w*" -i --nt ";\s*$"
  - gfind-java-ref "\w*Keyword\w*" -i -x class
- find-all -i -t "class\s+\w*keyword\w*"
- find-cs-def "\w*Keyword\w*" -i -x enum
- find-cs-def "\w*Keyword\w*" -ix public -H 20 -T 20 --nx internal -d "^(src)$|keyword" --nd "test|^(unit|bin$)|demo"
- find-py-def "\w*Keyword\w*" -i --nt "private|protected" --pp "/src/|keyword" --xp test,/unit,/bin/,demo --np "test|/unit|/bin/"
- find-py-def "\w*Keyword\w*" -i --nx private --nt "protected|internal" --xp test,/unit,/bin/,demo --pp "/src/|keyword" -H 20 -J ...
Replace File Text: Add -o "replace-to-xxx" + Append -R to replace (Preview replacing result without -R):
- find-ref OldName -o NewName -L row1 -N row2 --nt ... --nx ... --sp ... -xp ... --pp ...
  - gfind-ref OldName -o NewName -x "And has text" --nt ... --nx ... --sp ... -xp ... --pp ...
  - gfind-java-ref OldName -o NewName -x ... --nt ... --nx ... --sp ... -xp ... --pp ...
  - gfind-file -t "\bOld Text\b" -o "New Text" -j -- to preview only changed replacing.
- gfind-config -t ... -o ...
  - gfind-small -t ... -o ...
Accelerate searching if you know the language type (like Python/C#), the more filters the faster:
- find-py-def "\w*(get|set|update)\w*Method-Keyword-You-Heard\w*" -ix public --nx ... --nt ... --xp ... --sp ... --pp ... --np ... -d ... --nd ...
- find-cs-def "\w*(get|set|update)\w*Method-Keyword-You-Heard\w*" -i
- find-cpp-ref "(class|enum)\s+\w*Class-Keyword-You-Heard\w*" -i
- find-java-ref "(class|enum)\s+\w*Class-Keyword-You-Heard\w*" -i
- find-go-ref "\w*Class-Keyword-You-Heard\w*" -i -x class
- find-ui -it "regex-pattern" -x "and-plain-text"
- find-code -it "(class|enum)\s+\w*Class-Keyword-You-Heard\w*"
- find-all -i -t "(class|enum)\s+\w*Class-Keyword-You-Heard\w*"
- find-cpp-member-ref m_variable -- to find m_variable + getVariable + setVariable + _variable + variable_
  - gfind-cpp-member-ref m_variable -x set -- to find setVariable
- find-spring-ref setVariable -- to find variable + getVariable + setVariable
  - find-spring-ref variable -x is -- to find isVariable
Others like: (run command alias find-xxx to see the command template like alias find-all)
- find-doc -it "regex-pattern" -x "and-plain-text" --nx ... --nt ... --xp ... --sp ... --pp ... -d ... --nd ...
- find-config -it "regex-pattern" -x "and-plain-text"
- find-small -it "regex-pattern" -x "and-plain-text"
General finding commands like:
- find-nd -it "regex-pattern" -x "and-plain-text" optional args
- find-nd -f "\.(cs|py|java)$" -it "regex-pattern" -x "and-plain-text"
- find-ndp path1,path2,pathN -f "\.(cs|py|java)$" -it "regex-pattern" -x "and-plain-text"
- find-ndp path1,path2,pathN -it "regex-pattern" -x "and-plain-text" ...
- find-file -it "regex-pattern" --sp "sub-path1/,/sub-path2/"
- find-file -it "regex-pattern" -x "and-plain-text" --s1 100KB --s2 3.5MB -f ...
- gfind-file / gfind-all / gfind-small / gfind-ref / ...
With other optional args like:
- find-all -it "regex-pattern" -x "and-plain-text" -l just list matched file paths.
- find-all -x "and-plain-text" -it "regex-pattern" -o "replace-regex-to-this" -R replace file text
- find-all -it "regex-pattern" -x "and-plain-text" -o "replace-plain-text-to-this" -R replace file text
- find-all -it "regex-pattern" -x "and-plain-text" -U 5 -D 3 -H 100 -c Output 100 lines with 5-rows-up + 3-rows-down for each match.
- find-all -it "regex-pattern" -x "and-plain-text" --nx "not-contain-text" --nt "not-match-regex" --xp /bin/,debug/,test --pp expected-path-regex --np skip-path-regex -U 3 -D 2 -H 100 -T 100 ...
Other functions:
- find-top-source-type -H 9 : Get top 9 language types by file count/percentage in current workspace/repository.
- find-top-source-type -k 100 : Get top languages which file count >= 100.
- find-top-source-type -K 2.5 : Get top languages which file count percentage >= 2.5%.
- find-top-type -H 9 -w : Get top 9 file types and show one example file path (whole/full path) of each type.
- sort-source-by-time -T 9 : Get newest 9 source files sorting source files by file write/modify time.
- sort-by-time -T 9 : Get newest 9 files sorting all files by file write/modify time.
- sort-by-size -T 9 : Get newest 9 files sorting all files by file size.
- sort-by-size -T 9 -W : Get newest 9 files sorting all files by file size + Show full paths (absolute paths).

Once you found the results:

You can filter results by appending filters. (Add -c to see full command line or debug).
Click + open the search results in vscode and continue your code mining.
Search code together with official vscode extensions (like: vscode-python / vscode-go) + official IDEs (like: Visual Studio / PyCharm).

Additional Settings in Your Personal Settings file

Set skipFolders for Specific Project

You can set skipFolders pattern for each project to overwrite default.skipFolders in your personal settings file.

Like adding msr.{repo-folder-name}.skipFolders + value in %APPDATA%\Code\User\settings.json on Windows:
```
"msr.My-Project-Repo-Folder-Name.skipFolders": "^(unit|tests)$|other-partial-folder-name"
```
Promote Scores for Specific Project Folders or Paths

Set below items if you need in your personal settings file like %APPDATA%\Code\User\settings.json on Windows.

Regex pattern to promote scores for sorting definition (Go To Definition) or references (Find All References):
- msr.{repo-folder-name}.promoteFolderPattern: Regex pattern to promote folder scores for result file folders.
- msr.{repo-folder-name}.promotePathPattern: Regex pattern to promote path scores for result file paths.
- msr.{repo-folder-name}.promoteFolderScore: Recommended value is 100 to 1000. Default = 200 if not set.
- msr.{repo-folder-name}.promotePathScore: Recommended value is 100 to 1000. Default = 200 if not set.

Extra Paths Settings

msr.default.extraSearchPaths: Extra search paths of external repositories, dependency sources, or libraries, etc.
msr.default.extraSearchPathListFiles: Read extra search path list files of external repositories, dependency sources, or libraries, etc.

These global extra search paths settings enable searching related files without loading them into vscode.

More details see Extra Path Settings.

Specific Coding Language Settings Examples

msr.fileExtensionMap.batch: Set file extension of batch script (*.bat + *.cmd), value = "bat cmd".
msr.fileExtensionMap.rs: Support new language (Rust), value = "rs".
msr.cpp.codeAndConfigDocs: Regex pattern of C++ / C code + configuration + document files.
msr.py.extraSearchPaths: Extra search paths for Python code's external repositories, dependency sources, or libraries, etc.

Normal and Extensive Search

Normal Search (default context menu) + Extensive Search (context menu + command palette)

Normal search:
- Find definition (Go to Definition menu): Precise search project root + extra paths if set.
- Find references (Find All References menu): Disabled by default (Use menus like "Regex find xxx" menus or use shortcuts like code-mining).
Extensive search:
- Plain-text and Regex searching groups in command palette and partially in editor context menu (Find plain text in xxx or Regex find xxx)
- Provide specific searching in project root + extra paths if set. For example, Regex find pure references in code files will skip comments and long text in code.

Reuse the Command to Search Further or Replace File Text

You can reuse msr original search command line in vscode output channel MSR-Def-Ref or terminal MSR-RUN-CMD to search + replace files.

More details see: Scenario Glance.

Search Files with Rich Filters

You can use any 1 of 3 methods below to filter results or take further searches:

Leverage original search command line in MSR-Def-Ref or MSR-RUN-CMD, and change/tune.
Use command shortcuts to write brief searching/replacing commands in/out-of vscode:
- MSR-RUN-CMD + other terminals in vscode after auto-initialized doskey/alias.
- System console (like CMD/Bash) out of vscode: See switch general/specific shortcuts.
Write raw msr/nin commands with 70+/30+ composable optional-args (brief Quick-Start at bottom of running msr -h or nin -h).

Change the value of -t / --np / --nd if already used in command line.

Filter result text:
- -x "need plain text" , --nx "exclude plain-text"
- -t "search/include Regex" , --nt "exclude Regex"
Filter result file name, folder, full-path:
- -d "match folders Regex", --nd "exclude folder Regex"
- --pp "full path Regex" , --np "exclude full path Regex"
- --sp src/,/lib/,common/,.cpp , --xp "/full-paths,or/sub-paths,sub-path-text,.hpp"
You can also add more msr commands to the command line like:
- msr original command | msr -i -t "^\s*public" -P -A -C
Get matched file list (-l) -> Generate commands (-o msr xxx) -> Execute commands (-X):
- msr original command -l -PAC | msr -t "(.+)" -o "msr -p \1 -t \"class To-Search\" xxx" -X
More advanced search like: Execute(-X) + Only output matched command(-O) + No summary(-M)
- command lines | msr -X -M -O --to-stderr
  - Same with -XMO; Use to-stderr to redirect command lines info to stderr.
  - Use -P to hide beginning command lines like: -XPM or -X -P -M.
  - Use -I to hide end(return) command lines like: -XMI or -X -M -I.

Replace File Text with Preview and Backup

Reuse the search command above (or find-reference command line in vscode), you can also write a new command.

See replaced text lines (add -o replace-to-text):
- msr original command ... -t "xxx" ... -o "replace-to"
Just preview changed files (-j):
- msr original command ... -t "xxx" ... -o "replace-to" -j
Replace file text (-R):
- msr original command ... -t "xxx" ... -o "replace-to" -R
- Add -K if you want to backup changed files.
- Add --force to replace file text with BOM header not UTF-8 0xEFBBBF.

Brief Usage Summary for Search or Configuration

Besides the overview doc and readme.txt here's brief summary(try msrUI if built-in help not good enough):

Easy to add, update or tune Regex patterns to improve existing or support new coding languages:
- Use above debugging method with the output info.
- To test or tune your Regex patterns: Use the auto-downloaded tool msr of your system type to test like:
  - Input a string from input-arg (-z) or pipe (like echo):
    - msr -z "class CPP_EXPORT MatchThisCppClass" -t "^\s*class (\w+\s+)?\bMatchThisCppClass"
    - echo class CPP_EXPORT MatchThisCppClass | msr -t "^\s*class (\w+\s+)?\bMatchThisCppClass"
  - Input a file like:
    - msr -p my-class.hpp -t "^\s*class (\w+\s+)?\bMatchThisCppClass"
  - Input paths and recursively search like:
    - msr -r -p my-class.hpp,src,folder2 -t "^\s*class (\w+\s+)?\bMatchThisCppClass"
Use the rich searching options of msr-EXE like below, combine these optional options (You Can Use All):
- Set searching paths: (Can use both)
  - Recursively(-r) search one or more files or directories, like: -r -p file1,folder2,file2,folder3,folderN
  - Read paths (path list) from files, like: -w path-list-1.txt,path-list-2.txt
- Set max search depth (begin from input folder), like: -k 16 (default max search depth = 33).
- Filter text by line-matching (default) or whole-file-text-matching (add -S / --single-line Regex mode):
  - Ignore case:
    - Add -i (--ignore-case)
  - Regex patterns:
    - -t should-match-Regex-pattern
    - --nt should-not-match-Regex-pattern
  - Plain text:
    - -x should-contain-plain-text
    - --nx should-not-contain-plain-text
- Filter file name: -f should-match-Regex , --nf should-not-match
- Filter directory name: -d at-least-one-match , --nd none-should-match
- Filter full path pattern: --pp should-match , --np should-not-match
- Skip/Exclude link files: --xf
- Skip/Exclude link folders: --xd
- Skip full or sub paths: --xp d:\win\dir,my\sub,\bin\
  - Newer msr supports forward slash(/) on Windows to ease slash-escaping:
    - --xp d:/win/dir,my/sub,/bin/ same as d:\win\dir,my\sub,\bin\
      - (You can omit double quotes since no spaces and special characters).
    - --sp common/,lib/ same as common\,lib\
    - --np "d:/win/dir|my/sub|/bin/" same as "d:\\win\\dir|my\\sub|\\bin\\\\"
      - (Need more slashes if end with a slash + double quote).
    - --pp "/src/|/common" same as "\\src\\|\\common".
  - Check if your msr support forward slash(/) by command:
    - msr -h | msr -x "Support '/'"
- Try to read once for link files: -G (link files' folders must be or under input root paths of -p or/and -w)
- Filter file size: --s1 <= size <= s2 , like set one or two: --s1 1B --s2 1.5MB
- Filter file time: like --w1 2019-07, --w2 "2019-07-16 13:20" or 2019-07-16T13:20:01 (quote it if has spaces).
- Filter rows by begin + end row numbers: like -L 10 -N 200 (for each file).
- Filter rows by begin + end Regex: like -b "^\s*public.*?class" -q "^\s*\}\s*$"
- Filter rows by 1 or more blocks: -b "^\s*public.*?class" -Q "^\s*\}\s*$"
- Filter rows by 1 or more blocks + stop like: -b "^\s*public.*?class" -Q "^\s*\}\s*$" -q "stop-matching-regex"
- Quickly pick up head{N} results + Jump out(-J), like: -H 30 -J or -J -H 300 or -JH 300 etc.
- Don't color matched text: -C (Faster to output, and must be set for Linux/Cygwin to further process).
- Output summary info to stderr + hide warnings in stderr (like BOM encoding): -I : You can see -I -C or -IC or -J -I -C or -JIC etc. in package.json

Welcome to Contribute

Github repository: https://github.com/qualiu/vscode-msr

You may just need to add or update the configuration file: Add or update Regex patterns of find-references or find-definitions for various coding languages.

Add New Support or Improve

Please help to set the Regex patterns for them if you want. You can:

Reference the .definition and .reference Regex patterns of default or a specific language type in configuration file.
Debug this extension:
- Use vscode to open this project start (press F5) to debug, if you've cloned it.
- Set/Check msr.debug to enable output debugging info, if you just installed this extension.
See the docs here or on msr.

Check and Update this doc

npm run test to check configurations.
nin package.json nul -p -d -k 2 -x description -c Should no unreasonable duplicate descriptions.

Known Issues

Performance Depends on System Hardware Conditions

For example, it may slower than usual if the disk (where code files stored) is busy, or slower than expected if the hardware is too old, or CPU is too busy.

Workaround to Long Existing VsCode Bug Impact to Finding Definition and Reference

Long existing VsCode Bug: Unable to jump to definitions sometimes + Duplicate definition + reference results.

It's better to be solved by vscode itself to remove final duplicate results, or provide an interface for extensions to do it.

However, there're 2 workarounds for finding definition as below:

Workaround for VsCode Finding Definition Bug

Method-1: Set msr.quiet = false: Un-check it from user settings, which is opposite to Set Quiet Mode.
- This let you see sorted results after ranking and able to click and go to the locations.
- But this may annoy you to activate and show 2 channels each time "Go To Definition":
  - It'll show search command + results in the MSR-Def-Ref channel in OUTPUT tab each time.
  - And re-run search in MSR-RUN-CMD in TERMINAL tab if got multiple results or no results found.
- The best scenario of this method is probably when you're "just reviewing or reading code".
Method-2: Set msr.reRunSearchInTerminalIfResultsMoreThan = 0 (default =1).
- This is more quiet: It won't activate the channels and tabs above.
- This just re-run the search command in MSR-RUN-CMD channel in TERMINAL tab to let you click and go.
- You can also re-use the commands, add some options to filter your search or replace file text.
- But you can only see them when when MSR-RUN-CMD is the active window(terminal).

One Redundant Finding Definition was Triggered if Used `Ctrl` with `Mouse left click`

Due to both "Peek Definition" and "Go to Definition" were triggered:

Peek Definition was triggered by Ctrl + Mouse hover.
Go to Definition was triggered by Ctrl + Mouse left click.

You can use Ctrl + Mouse hover to peek definition, use F12 to go to definition as a workaround.

Current Support to Finding Definition and References

Near-precise support: Will show multiple results for same name classes/methods/etc, due to this is a light tool without syntax parsing and cache.
Near-precise support class, methods, enum, field, property for C#, Python, Java, Scala, C++ / C.
Rough support class and method for all type of languages (you can copy/write configurations follow existing languages).

Welcome + Please help to improve searching definitions and references for classes and methods, and add supports for enum , property, field etc.

See easy to support new languages + add new support or improve.

Release Notes

See CHANGELOG or vscode-msr extension commit history.

Enjoy!

Name		Name	Last commit message	Last commit date
Latest commit History 134 Commits
.vscode		.vscode
images		images
src		src
.gitignore		.gitignore
.vscodeignore		.vscodeignore
Add-New-Language-Support-For-Developers.md		Add-New-Language-Support-For-Developers.md
CHANGELOG.md		CHANGELOG.md
Create-Custom-Common-Alias-Once-and-for-All.md		Create-Custom-Common-Alias-Once-and-for-All.md
Extra-Path-Settings.md		Extra-Path-Settings.md
Manually-Download-Tools.md		Manually-Download-Tools.md
README.md		README.md
license.md		license.md
package-lock.json		package-lock.json
package.json		package.json
tsconfig.json		tsconfig.json
tslint.json		tslint.json
vsc-extension-quickstart.md		vsc-extension-quickstart.md

License

lqm678/vscode-msr

Folders and files

Latest commit

History

Repository files navigation