add board MKS Smelzi V1.0

lsellens · Feb 14, 2024 · 7af853e · 7af853e
1 parent b691178
commit 7af853e
Show file tree

Hide file tree

Showing 7 changed files with 137 additions and 68 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -61,7 +61,7 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(lsellens, M518 config)" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
 /**
@@ -88,7 +88,7 @@
 
 // Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_RAMPS_14_EFB
+  #define MOTHERBOARD BOARD_MKS_SMELZI_10 // lsellens
 #endif
 
 /**
@@ -136,11 +136,11 @@
 //#define BLUETOOTH
 
 // Name displayed in the LCD "Ready" message and Info menu
-//#define CUSTOM_MACHINE_NAME "3D Printer"
+#define CUSTOM_MACHINE_NAME "Alunar M518" // lsellens
 
 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like https://www.uuidgenerator.net/version4
-//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
+#define MACHINE_UUID "13d113cd-a782-47b5-8115-7a0e02c750c0" // lsellens
 
 // @section stepper drivers
 
@@ -403,16 +403,16 @@
  * Enable and connect the power supply to the PS_ON_PIN.
  * Specify whether the power supply is active HIGH or active LOW.
  */
-//#define PSU_CONTROL
-//#define PSU_NAME "Power Supply"
+#define PSU_CONTROL // lsellens
+#define PSU_NAME "Power Supply" // lsellens
 
 #if ENABLED(PSU_CONTROL)
   //#define MKS_PWC                 // Using the MKS PWC add-on
   //#define PS_OFF_CONFIRM          // Confirm dialog when power off
   //#define PS_OFF_SOUND            // Beep 1s when power off
   #define PSU_ACTIVE_STATE LOW      // Set 'LOW' for ATX, 'HIGH' for X-Box
 
-  //#define PSU_DEFAULT_OFF               // Keep power off until enabled directly with M80
+  #define PSU_DEFAULT_OFF               // lsellens Keep power off until enabled directly with M80
   //#define PSU_POWERUP_DELAY      250    // (ms) Delay for the PSU to warm up to full power
   //#define LED_POWEROFF_TIMEOUT 10000    // (ms) Turn off LEDs after power-off, with this amount of delay
 
@@ -422,7 +422,7 @@
   //#define PSU_POWERUP_GCODE  "M355 S1"  // G-code to run after power-on (e.g., case light on)
   //#define PSU_POWEROFF_GCODE "M355 S0"  // G-code to run before power-off (e.g., case light off)
 
-  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
+  #define AUTO_POWER_CONTROL      // lsellens Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
     #define AUTO_POWER_FANS           // Turn on PSU for fans
     #define AUTO_POWER_E_FANS         // Turn on PSU for E Fans
@@ -433,7 +433,7 @@
     //#define POWER_OFF_DELAY          60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
   #endif
   #if EITHER(AUTO_POWER_CONTROL, POWER_OFF_WAIT_FOR_COOLDOWN)
-    //#define AUTO_POWER_E_TEMP        50 // (°C) PSU on if any extruder is over this temperature
+    #define AUTO_POWER_E_TEMP        50 // lsellens (°C) PSU on if any extruder is over this temperature
     //#define AUTO_POWER_CHAMBER_TEMP  30 // (°C) PSU on if the chamber is over this temperature
     //#define AUTO_POWER_COOLER_TEMP   26 // (°C) PSU on if the cooler is over this temperature
   #endif
@@ -557,7 +557,7 @@
 #define TEMP_SENSOR_5 0
 #define TEMP_SENSOR_6 0
 #define TEMP_SENSOR_7 0
-#define TEMP_SENSOR_BED 1
+#define TEMP_SENSOR_BED 0 // lsellens no heated bed
 #define TEMP_SENSOR_PROBE 0
 #define TEMP_SENSOR_CHAMBER 0
 #define TEMP_SENSOR_COOLER 0
@@ -632,15 +632,15 @@
 // Above this temperature the heater will be switched off.
 // This can protect components from overheating, but NOT from shorts and failures.
 // (Use MINTEMP for thermistor short/failure protection.)
-#define HEATER_0_MAXTEMP 275
+#define HEATER_0_MAXTEMP 270 // lsellens
 #define HEATER_1_MAXTEMP 275
 #define HEATER_2_MAXTEMP 275
 #define HEATER_3_MAXTEMP 275
 #define HEATER_4_MAXTEMP 275
 #define HEATER_5_MAXTEMP 275
 #define HEATER_6_MAXTEMP 275
 #define HEATER_7_MAXTEMP 275
-#define BED_MAXTEMP      150
+#define BED_MAXTEMP      115 // lsellens
 #define CHAMBER_MAXTEMP  60
 
 /**
@@ -854,7 +854,7 @@
  * Note: For Bowden Extruders make this large enough to allow load/unload.
  */
 #define PREVENT_LENGTHY_EXTRUDE
-#define EXTRUDE_MAXLENGTH 200
+#define EXTRUDE_MAXLENGTH 25 // lsellens
 
 //===========================================================================
 //======================== Thermal Runaway Protection =======================
@@ -1130,9 +1130,9 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
-#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
-#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING true  // lsellens Set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true  // lsellens Set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true  // lsellens Set to true to invert the logic of the endstop.
 #define I_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define J_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define K_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
@@ -1152,7 +1152,7 @@
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
-//#define ENDSTOP_INTERRUPTS_FEATURE
+#define ENDSTOP_INTERRUPTS_FEATURE // lsellens
 
 /**
  * Endstop Noise Threshold
@@ -1196,18 +1196,18 @@
  * Override with M92
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 500 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 100.23, 100.25, 400.60, 96.00 } // lsellens
 
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
+#define DEFAULT_MAX_FEEDRATE          { 150, 150, 5, 25 } // lsellens
 
 //#define LIMITED_MAX_FR_EDITING        // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
 #if ENABLED(LIMITED_MAX_FR_EDITING)
-  #define MAX_FEEDRATE_EDIT_VALUES    { 600, 600, 10, 50 } // ...or, set your own edit limits
+  #define MAX_FEEDRATE_EDIT_VALUES    { 300, 300, 10, 50 } // lsellens ...or, set your own edit limits
 #endif
 
 /**
@@ -1245,9 +1245,9 @@
  */
 //#define CLASSIC_JERK
 #if ENABLED(CLASSIC_JERK)
-  #define DEFAULT_XJERK 10.0
-  #define DEFAULT_YJERK 10.0
-  #define DEFAULT_ZJERK  0.3
+  #define DEFAULT_XJERK 20.0 // lsellens
+  #define DEFAULT_YJERK 20.0 // lsellens
+  #define DEFAULT_ZJERK  0.4 // lsellens
   //#define DEFAULT_IJERK  0.3
   //#define DEFAULT_JJERK  0.3
   //#define DEFAULT_KJERK  0.3
@@ -1259,7 +1259,7 @@
 
   //#define LIMITED_JERK_EDITING        // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
   #if ENABLED(LIMITED_JERK_EDITING)
-    #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits
+    #define MAX_JERK_EDIT_VALUES { 40, 40, 0.8, 20 } // lsellens ...or, set your own edit limits
   #endif
 #endif
 
@@ -1273,7 +1273,7 @@
  *   https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
  */
 #if DISABLED(CLASSIC_JERK)
-  #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
+  #define JUNCTION_DEVIATION_MM 0.02 // lsellens (mm) Distance from real junction edge
   #define JD_HANDLE_SMALL_SEGMENTS    // Use curvature estimation instead of just the junction angle
                                       // for small segments (< 1mm) with large junction angles (> 135°).
 #endif
@@ -1286,7 +1286,7 @@
  *
  * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
  */
-//#define S_CURVE_ACCELERATION
+#define S_CURVE_ACCELERATION // lsellens
 
 //===========================================================================
 //============================= Z Probe Options =============================
@@ -1668,7 +1668,7 @@
 // @section motion
 
 // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
-#define INVERT_X_DIR false
+#define INVERT_X_DIR true // lsellens
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR false
 //#define INVERT_I_DIR false
@@ -1681,7 +1681,7 @@
 // @section extruder
 
 // For direct drive extruder v9 set to true, for geared extruder set to false.
-#define INVERT_E0_DIR false
+#define INVERT_E0_DIR true // lsellens
 #define INVERT_E1_DIR false
 #define INVERT_E2_DIR false
 #define INVERT_E3_DIR false
@@ -1692,7 +1692,7 @@
 
 // @section homing
 
-//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety.
+#define NO_MOTION_BEFORE_HOMING // lsellens Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety.
 //#define HOME_AFTER_DEACTIVATE   // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety.
 
 /**
@@ -1702,7 +1702,7 @@
  */
 //#define Z_IDLE_HEIGHT Z_HOME_POS
 
-//#define Z_HOMING_HEIGHT  4      // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
+#define Z_HOMING_HEIGHT  4      // lsellens (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
                                   // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
 
 //#define Z_AFTER_HOMING  10      // (mm) Height to move to after homing Z
@@ -1722,16 +1722,16 @@
 // @section geometry
 
 // The size of the printable area
-#define X_BED_SIZE 200
-#define Y_BED_SIZE 200
+#define X_BED_SIZE 155 // lsellens
+#define Y_BED_SIZE 150 // lsellens
 
 // Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
-#define X_MIN_POS 0
-#define Y_MIN_POS 0
+#define X_MIN_POS -20 // lsellens
+#define Y_MIN_POS -25 // lsellens
 #define Z_MIN_POS 0
 #define X_MAX_POS X_BED_SIZE
 #define Y_MAX_POS Y_BED_SIZE
-#define Z_MAX_POS 200
+#define Z_MAX_POS 160 // lsellens
 //#define I_MIN_POS 0
 //#define I_MAX_POS 50
 //#define J_MIN_POS 0
@@ -2060,13 +2060,13 @@
 #endif
 
 // Add a menu item to move between bed corners for manual bed adjustment
-//#define LCD_BED_TRAMMING
+#define LCD_BED_TRAMMING // lsellens
 
 #if ENABLED(LCD_BED_TRAMMING)
-  #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
+  #define BED_TRAMMING_INSET_LFRB { 0, 0, 0, 0 } // lsellens (mm) Left, Front, Right, Back insets
   #define BED_TRAMMING_HEIGHT      0.0        // (mm) Z height of nozzle at tramming points
   #define BED_TRAMMING_Z_HOP       4.0        // (mm) Z height of nozzle between tramming points
-  //#define BED_TRAMMING_INCLUDE_CENTER       // Move to the center after the last corner
+  #define BED_TRAMMING_INCLUDE_CENTER       // lsellens Move to the center after the last corner
   //#define BED_TRAMMING_USE_PROBE
   #if ENABLED(BED_TRAMMING_USE_PROBE)
     #define BED_TRAMMING_PROBE_TOLERANCE 0.1  // (mm)
@@ -2244,7 +2244,7 @@
 //
 #define PREHEAT_1_LABEL       "PLA"
 #define PREHEAT_1_TEMP_HOTEND 180
-#define PREHEAT_1_TEMP_BED     70
+#define PREHEAT_1_TEMP_BED     50 // lsellens
 #define PREHEAT_1_TEMP_CHAMBER 35
 #define PREHEAT_1_FAN_SPEED     0 // Value from 0 to 255
 
@@ -2267,11 +2267,11 @@
  *    P1  Raise the nozzle always to Z-park height.
  *    P2  Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
  */
-//#define NOZZLE_PARK_FEATURE
+#define NOZZLE_PARK_FEATURE // lsellens
 
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z_raise }
-  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS), (Y_MAX_POS), 20 } // lsellens
   #define NOZZLE_PARK_MOVE          0   // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
@@ -2488,7 +2488,7 @@
  * SD Card support is disabled by default. If your controller has an SD slot,
  * you must uncomment the following option or it won't work.
  */
-//#define SDSUPPORT
+#define SDSUPPORT // lsellens
 
 /**
  * SD CARD: ENABLE CRC
@@ -2504,7 +2504,7 @@
  * just remove some extraneous menu items to recover space.
  */
 //#define NO_LCD_MENUS
-//#define SLIM_LCD_MENUS
+#define SLIM_LCD_MENUS // lsellens
 
 //
 // ENCODER SETTINGS
@@ -2830,7 +2830,7 @@
 // MKS MINI12864 with graphic controller and SD support
 // https://reprap.org/wiki/MKS_MINI_12864
 //
-//#define MKS_MINI_12864
+#define MKS_MINI_12864 // lsellens
 
 //
 // MKS MINI12864 V3 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight.