A mod for Voron 2.4; designed by the Voron community, for the Voron community! Please note that it is a work in progress, design iterations are expected. The files are hosted on github so we have a log of the past history for the parts.
-
4040 vertical components to allow for insulation with air gap stock
-
Top mounted Z drives
-
Top mounted low voltage components
-
Bottom mounted high voltage components
- Replace X/Y cable chains with umbelical (Z chain retained for A/B motors and Y endstop)
-
4pcs 4040 extrusions (HFSB5-4040) -or- 4pcs 404020 rounded extrusions (HFSR5-404020)
-
New Z Idlers (only printed parts required)
-
Relocate X/Y endstops (only printed parts required)
-
Cable Glands for Umbelical
For any Voron stock parts, or the Z idlers, please use standard Voron settings.
For skirts, etc, you may use other settings to reduce filament usage. Currently I am using: 0.3mm layer height, 2 perimeters, 2 bottom, 3 top, 20% infill.
All extrusions are listed using Misumi part numbers.
Part numbers are listed for both square 4040, and rounded 404020 vertical extrusions. Choose only one type. The first set of part numbers is for plain cut extrusions. The second part number is for square extrusions that are cut and drilled by misumi.
If you choose to use rounded corners, you will need to reuse your frame's existing 2020 vertical extrusions, or purchase a set of them for a scratch build. The rounded verticals do not require machining, but the 2020 verticals that nest into them will need to have holes drilled to enable securing the rounded piece with blind joints, as shown here.
| Misumi Part # | Qty |
|---|---|
| Square Verticals: HFSB5-4040-530 | 4 |
| Rounded Verticals: HFSR5-404020-530 | 4 |
| Misumi Part # | Qty |
|---|---|
| Square Verticals: HFSB5-4040-530-LCP-RCP | 4 |
| Misumi Part # | Qty |
|---|---|
| HFSB5-2020-530 | 2 |
| HFSB5-2020-428 | 2 |
| Misumi Part # | Qty |
|---|---|
| HFSB5-2020-530-AH10-BH520 | 2 |
| HFSB5-2020-428-TPW | 2 |
| Misumi Part # | Qty |
|---|---|
| Square Verticals: HFSB5-4040-480 | 4 |
| Rounded Verticals: HFSR5-404020-480 | 4 |
| Misumi Part # | Qty |
|---|---|
| Verticals: HFSB5-4040-480-LCP-RCP | 4 |
| Misumi Part # | Qty |
|---|---|
| HFSB5-2020-480 | 2 |
| HFSB5-2020-378 | 2 |
| Misumi Part # | Qty |
|---|---|
| HFSB5-2020-480-AH10-BH470 | 2 |
| HFSB5-2020-378-TPW | 2 |
| Misumi Part # | Qty |
|---|---|
| Square Verticals: HFSB5-4040-430 | 4 |
| Rounded Verticals: HFSR5-404020-430 | 4 |
| Misumi Part # | Qty |
|---|---|
| Square Verticals: HFSB5-4040-430-LCP-RCP | 4 |
| Misumi Part # | Qty |
|---|---|
| HFSB5-2020-430 | 2 |
| HFSB5-2020-328 | 2 |
| Misumi Part # | Qty |
|---|---|
| HFSB5-2020-430-AH10-BH420 | 2 |
| HFSB5-2020-328-TPW | 2 |
Silver and Black are listed
| Misumi Part # | Qty | Color |
|---|---|---|
| HHPSN5-SET | 2 | Silver |
| HHPBSN5-SET | 2 | Black |
While we all have many irons in the fire, Doomcube v2 is still being worked on. Keep an eye out for changes coming to the panel printed parts, as well as some coming mods from the community. In the interest of encouraging more Doom builds, as well as more mods, a complete DOOM CAD file is now available with all the Doom and Voron components together. Find it in the CAD folder with all the individual component CAD files. The individual components have been gone through and all hole sizes have been made consistent. Missing chamfers were added, and some geometry cleaned up. The frame and panel assemblies will stay as they are until new files are ready.
If you examine the complete CAD file you will see it is not limited to the basic DOOM and Voron components. Included are two optional gantry variants, with a handful of popular community produced V2 mods installed. The file is structured to be very easy to see what you want, and hide what you don't. The step file has everything shown by default, so you'll need to hide the frame, skirts, and gantries you don't wish to see. It should only take a few clicks.
DoomCubing is a great way to improve your v2. It's also a perfect time to install several mods, while you have things partially disassembled. To give you some ideas about possible mod combos, the optional modded gantries in the complete cad file contain the following excellent mods:
| Mod | Repository |
|---|---|
| Ark's MGN12 | https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/arkeet/mgn12 |
| Hartk's GE5C Spherical Z Joint | https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/hartk1213/Voron2.4_GE5C |
| Hartk's Pinmod (X/Y Joints, ,A/B Drive Frames, A/B idlers, Z idlers) | https://github.com/hartk1213/MISC/tree/main/Voron%20Mods/Voron%202/2.4/Voron2.4_Pins_Mod |
| Mod | Repository |
|---|---|
| Long's Mantis Toolhead | https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Long/Mantis_Dual_5015 |
| Hartk's GE5C Spherical Z Joint | https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/hartk1213/Voron2.4_GE5C |
| Hartk's Pinmod (X/Y Joints, ,A/B Drive Frames, A/B idlers, Z idlers) | https://github.com/hartk1213/MISC/tree/main/Voron%20Mods/Voron%202/2.4/Voron2.4_Pins_Mod |
| Phalanx's Other Idlers | https://github.com/selliott79/Other-V2-Idlers |
The following mods are present in all or most Doomcube variants in the complete CAD file. Klicky is not on the Mantis toolhead, since it has a native magprobe that works identically to Klicky.
| Mod | Repository |
|---|---|
| L.e.o.p.a.r.d and Hartk's Sexbolt Z Endstop | https://github.com/hartk1213/MISC/tree/main/Voron%20Mods/Voron%202/2.4/Voron2.4_SexBolt_ZEndstop |
| josar's Klicky Probe | https://github.com/jlas1/Klicky-Probe |
| whoppingpochard's Gantry Rail Backers | https://github.com/tanaes/whopping_Voron_mods/tree/main/extrusion_backers |