Ps 9255 contributing guide #4

hulyav · 2024-10-03T21:00:17Z

Done some paraphrasing with Gemini, feel free to change it as you wish.

Upstream commit ID : fb-mysql-5.6.35/8cb1dc836b68f1f13e8b2655b2b8cb2d57f400b3 PS-5217 : Merge fb-prod201803 Summary: Original report: https://jira.mariadb.org/browse/MDEV-15816 To reproduce this bug just following below steps, client 1: USE test; CREATE TABLE t1 (i INT) ENGINE=MyISAM; HANDLER t1 OPEN h; CREATE TABLE t2 (i INT) ENGINE=RocksDB; LOCK TABLES t2 WRITE; client 2: FLUSH TABLES WITH READ LOCK; client 1: INSERT INTO t2 VALUES (1); So client 1 acquired the lock and set m_lock_rows = RDB_LOCK_WRITE. Then client 2 calls store_lock(TL_IGNORE) and m_lock_rows was wrongly set to RDB_LOCK_NONE, as below ``` #0 myrocks::ha_rocksdb::store_lock (this=0x7fffbc03c7c8, thd=0x7fffc0000ba0, to=0x7fffc0011220, lock_type=TL_IGNORE) #1 get_lock_data (thd=0x7fffc0000ba0, table_ptr=0x7fffe84b7d20, count=1, flags=2) #2 mysql_lock_abort_for_thread (thd=0x7fffc0000ba0, table=0x7fffbc03bbc0) #3 THD::notify_shared_lock (this=0x7fffc0000ba0, ctx_in_use=0x7fffbc000bd8, needs_thr_lock_abort=true) #4 MDL_lock::notify_conflicting_locks (this=0x555557a82380, ctx=0x7fffc0000cc8) #5 MDL_context::acquire_lock (this=0x7fffc0000cc8, mdl_request=0x7fffe84b8350, lock_wait_timeout=2) percona#6 Global_read_lock::lock_global_read_lock (this=0x7fffc0003fe0, thd=0x7fffc0000ba0) ``` Finally, client 1 "INSERT INTO..." hits the Assertion 'm_lock_rows == RDB_LOCK_WRITE' failed in myrocks::ha_rocksdb::write_row() Fix this bug by not setting m_locks_rows if lock_type == TL_IGNORE. Closes facebook/mysql-5.6#838 Pull Request resolved: facebook/mysql-5.6#871 Differential Revision: D9417382 Pulled By: lth fbshipit-source-id: c36c164e06c

PS-5741: Incorrect use of memset_s in keyring_vault. Fixed the usage of memset_s. The arguments should be: void memset_s(void *dest, size_t dest_max, int c, size_t n) where the 2nd argument is size of buffer and the 3rd is argument is character to fill. --------------------------------------------------------------------------- PS-7769 - Fix use-after-return error in audit_log_exclude_accounts_validate --- *Problem:* `st_mysql_value::val_str` might return a pointer to `buf` which after the function called is deleted. Therefore the value in `save`, after reuturnin from the function, is invalid. In this particular case, the error is not manifesting as val_str` returns memory allocated with `thd_strmake` and it does not use `buf`. *Solution:* Allocate memory with `thd_strmake` so the memory in `save` is not local. --------------------------------------------------------------------------- Fix test main.bug12969156 when WITH_ASAN=ON *Problem:* ASAN complains about stack-buffer-overflow on function `mysql_heartbeat`: ``` ==90890==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7fe746d06d14 at pc 0x7fe760f5b017 bp 0x7fe746d06cd0 sp 0x7fe746d06478 WRITE of size 24 at 0x7fe746d06d14 thread T16777215 Address 0x7fe746d06d14 is located in stack of thread T26 at offset 340 in frame #0 0x7fe746d0a55c in mysql_heartbeat(void*) /home/yura/ws/percona-server/plugin/daemon_example/daemon_example.cc:62 This frame has 4 object(s): [48, 56) 'result' (line 66) [80, 112) '_db_stack_frame_' (line 63) [144, 200) 'tm_tmp' (line 67) [240, 340) 'buffer' (line 65) <== Memory access at offset 340 overflows this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork (longjmp and C++ exceptions *are* supported) Thread T26 created by T25 here: #0 0x7fe760f5f6d5 in __interceptor_pthread_create ../../../../src/libsanitizer/asan/asan_interceptors.cpp:216 #1 0x557ccbbcb857 in my_thread_create /home/yura/ws/percona-server/mysys/my_thread.c:104 #2 0x7fe746d0b21a in daemon_example_plugin_init /home/yura/ws/percona-server/plugin/daemon_example/daemon_example.cc:148 #3 0x557ccb4c69c7 in plugin_initialize /home/yura/ws/percona-server/sql/sql_plugin.cc:1279 #4 0x557ccb4d19cd in mysql_install_plugin /home/yura/ws/percona-server/sql/sql_plugin.cc:2279 #5 0x557ccb4d218f in Sql_cmd_install_plugin::execute(THD*) /home/yura/ws/percona-server/sql/sql_plugin.cc:4664 percona#6 0x557ccb47695e in mysql_execute_command(THD*, bool) /home/yura/ws/percona-server/sql/sql_parse.cc:5160 percona#7 0x557ccb47977c in mysql_parse(THD*, Parser_state*, bool) /home/yura/ws/percona-server/sql/sql_parse.cc:5952 percona#8 0x557ccb47b6c2 in dispatch_command(THD*, COM_DATA const*, enum_server_command) /home/yura/ws/percona-server/sql/sql_parse.cc:1544 percona#9 0x557ccb47de1d in do_command(THD*) /home/yura/ws/percona-server/sql/sql_parse.cc:1065 percona#10 0x557ccb6ac294 in handle_connection /home/yura/ws/percona-server/sql/conn_handler/connection_handler_per_thread.cc:325 percona#11 0x557ccbbfabb0 in pfs_spawn_thread /home/yura/ws/percona-server/storage/perfschema/pfs.cc:2198 percona#12 0x7fe760ab544f in start_thread nptl/pthread_create.c:473 ``` The reason is that `my_thread_cancel` is used to finish the daemon thread. This is not and orderly way of finishing the thread. ASAN does not register the stack variables are not used anymore which generates the error above. This is a benign error as all the variables are on the stack. *Solution*: Finish the thread in orderly way by using a signalling variable. --------------------------------------------------------------------------- PS-8204: Fix XML escape rules for audit plugin https://jira.percona.com/browse/PS-8204 There was a wrong length specified for some XML escape rules. As a result of this terminating null symbol from replacement rule was copied into resulting string. This lead to quer text truncation in audit log file. In addition added empty replacement rules for '\b' and 'f' symbols which just remove them from resulting string. These symboles are not supported in XML 1.0. --------------------------------------------------------------------------- PS-8854: Add main.percona_udf MTR test Add a test to check FNV1A_64, FNV_64, and MURMUR_HASH user-defined functions.

…n read() syscall over network https://jira.percona.com/browse/PS-8592 Description ----------- GR suffered from problems caused by the security probes and network scanner processes connecting to the group replication communication port. This usually is not a problem, but poses a serious threat when another member tries to join the cluster by initialting a connection to the member which is affected by external processes using the port dedicated for group communication for longer durations. On such activites by external processes, the SSL enabled server stalled forever on the SSL_accept() call waiting for handshake data. Below is the stacktrace: Thread 55 (Thread 0x7f7bb77ff700 (LWP 2198598)): #0 in read () #1 in sock_read () #2 in BIO_read () #3 in ssl23_read_bytes () #4 in ssl23_get_client_hello () #5 in ssl23_accept () percona#6 in xcom_tcp_server_startup(Xcom_network_provider*) () When the server stalled in the above path forever, it prohibited other members to join the cluster resulting in the following messages on the joiner server's logs. [ERROR] [MY-011640] [Repl] Plugin group_replication reported: 'Timeout on wait for view after joining group' [ERROR] [MY-011735] [Repl] Plugin group_replication reported: '[GCS] The member is already leaving or joining a group.' Solution -------- This patch adds two new variables 1. group_replication_xcom_ssl_socket_timeout It is a file-descriptor level timeout in seconds for both accept() and SSL_accept() calls when group replication is listening on the xcom port. When set to a valid value, say for example 5 seconds, both accept() and SSL_accept() return after 5 seconds. The default value has been set to 0 (waits infinitely) for backward compatibility. This variable is effective only when GR is configred with SSL. 2. group_replication_xcom_ssl_accept_retries It defines the number of retries to be performed before closing the socket. For each retry the server thread calls SSL_accept() with timeout defined by the group_replication_xcom_ssl_socket_timeout for the SSL handshake process once the connection has been accepted by the first accept() call. The default value has been set to 10. This variable is effective only when GR is configred with SSL. Note: - Both of the above variables are dynamically configurable, but will become effective only on START GROUP_REPLICATION. ------------------------------------------------------------------------------- PS-8844: Fix the failing main.mysqldump_gtid_purged https://jira.percona.com/browse/PS-8844 This patch fixes the test failure of main.mysqldump_gtid_purged that failed due to the uninitialized variable $redirect_stderr in the start_proc_in_background.inc.

…ocal DDL executed https://perconadev.atlassian.net/browse/PS-9018 Problem ------- In high concurrency scenarios, MySQL replica can enter into a deadlock due to a race condition between the replica applier thread and the client thread performing a binlog group commit. Analysis -------- It needs at least 3 threads for this deadlock to happen 1. One client thread 2. Two replica applier threads How this deadlock happens? -------------------------- 0. Binlog is enabled on replica, but log_replica_updates is disabled. 1. Initially, both "Commit Order" and "Binlog Flush" queues are empty. 2. Replica applier thread 1 enters the group commit pipeline to register in the "Commit Order" queue since `log-replica-updates` is disabled on the replica node. 3. Since both "Commit Order" and "Binlog Flush" queues are empty, the applier thread 1 3.1. Becomes leader (In Commit_stage_manager::enroll_for()). 3.2. Registers in the commit order queue. 3.3. Acquires the lock MYSQL_BIN_LOG::LOCK_log. 3.4. Commit Order queue is emptied, but the lock MYSQL_BIN_LOG::LOCK_log is not yet released. NOTE: SE commit for applier thread is already done by the time it reaches here. 4. Replica applier thread 2 enters the group commit pipeline to register in the "Commit Order" queue since `log-replica-updates` is disabled on the replica node. 5. Since the "Commit Order" queue is empty (emptied by applier thread 1 in 3.4), the applier thread 2 5.1. Becomes leader (In Commit_stage_manager::enroll_for()) 5.2. Registers in the commit order queue. 5.3. Tries to acquire the lock MYSQL_BIN_LOG::LOCK_log. Since it is held by applier thread 1 it will wait until the lock is released. 6. Client thread enters the group commit pipeline to register in the "Binlog Flush" queue. 7. Since "Commit Order" queue is not empty (there is applier thread 2 in the queue), it enters the conditional wait `m_stage_cond_leader` with an intention to become the leader for both the "Binlog Flush" and "Commit Order" queues. 8. Applier thread 1 releases the lock MYSQL_BIN_LOG::LOCK_log and proceeds to update the GTID by calling gtid_state->update_commit_group() from Commit_order_manager::flush_engine_and_signal_threads(). 9. Applier thread 2 acquires the lock MYSQL_BIN_LOG::LOCK_log. 9.1. It checks if there is any thread waiting in the "Binlog Flush" queue to become the leader. Here it finds the client thread waiting to be the leader. 9.2. It releases the lock MYSQL_BIN_LOG::LOCK_log and signals on the cond_var `m_stage_cond_leader` and enters a conditional wait until the thread's `tx_commit_pending` is set to false by the client thread (will be done in the Commit_stage_manager::process_final_stage_for_ordered_commit_group() called by client thread from fetch_and_process_flush_stage_queue()). 10. The client thread wakes up from the cond_var `m_stage_cond_leader`. The thread has now become a leader and it is its responsibility to update GTID of applier thread 2. 10.1. It acquires the lock MYSQL_BIN_LOG::LOCK_log. 10.2. Returns from `enroll_for()` and proceeds to process the "Commit Order" and "Binlog Flush" queues. 10.3. Fetches the "Commit Order" and "Binlog Flush" queues. 10.4. Performs the storage engine flush by calling ha_flush_logs() from fetch_and_process_flush_stage_queue(). 10.5. Proceeds to update the GTID of threads in "Commit Order" queue by calling gtid_state->update_commit_group() from Commit_stage_manager::process_final_stage_for_ordered_commit_group(). 11. At this point, we will have - Client thread performing GTID update on behalf if applier thread 2 (from step 10.5), and - Applier thread 1 performing GTID update for itself (from step 8). Due to the lack of proper synchronization between the above two threads, there exists a time window where both threads can call gtid_state->update_commit_group() concurrently. In subsequent steps, both threads simultaneously try to modify the contents of the array `commit_group_sidnos` which is used to track the lock status of sidnos. This concurrent access to `update_commit_group()` can cause a lock-leak resulting in one thread acquiring the sidno lock and not releasing at all. ----------------------------------------------------------------------------------------------------------- Client thread Applier Thread 1 ----------------------------------------------------------------------------------------------------------- update_commit_group() => global_sid_lock->rdlock(); update_commit_group() => global_sid_lock->rdlock(); calls update_gtids_impl_lock_sidnos() calls update_gtids_impl_lock_sidnos() set commit_group_sidno[2] = true set commit_group_sidno[2] = true lock_sidno(2) -> successful lock_sidno(2) -> waits update_gtids_impl_own_gtid() -> Add the thd->owned_gtid in `executed_gtids()` if (commit_group_sidnos[2]) { unlock_sidno(2); commit_group_sidnos[2] = false; } Applier thread continues.. lock_sidno(2) -> successful update_gtids_impl_own_gtid() -> Add the thd->owned_gtid in `executed_gtids()` if (commit_group_sidnos[2]) { <=== this check fails and lock is not released. unlock_sidno(2); commit_group_sidnos[2] = false; } Client thread continues without releasing the lock ----------------------------------------------------------------------------------------------------------- 12. As the above lock-leak can also happen the other way i.e, the applier thread fails to unlock, there can be different consequences hereafter. 13. If the client thread continues without releasing the lock, then at a later stage, it can enter into a deadlock with the applier thread performing a GTID update with stack trace. Client_thread ------------- #1 __GI___lll_lock_wait #2 ___pthread_mutex_lock #3 native_mutex_lock <= waits for commit lock while holding sidno lock #4 Commit_stage_manager::enroll_for #5 MYSQL_BIN_LOG::change_stage percona#6 MYSQL_BIN_LOG::ordered_commit percona#7 MYSQL_BIN_LOG::commit percona#8 ha_commit_trans percona#9 trans_commit_implicit percona#10 mysql_create_like_table percona#11 Sql_cmd_create_table::execute percona#12 mysql_execute_command percona#13 dispatch_sql_command Applier thread -------------- #1 ___pthread_mutex_lock #2 native_mutex_lock #3 safe_mutex_lock #4 Gtid_state::update_gtids_impl_lock_sidnos <= waits for sidno lock #5 Gtid_state::update_commit_group percona#6 Commit_order_manager::flush_engine_and_signal_threads <= acquires commit lock here percona#7 Commit_order_manager::finish percona#8 Commit_order_manager::wait_and_finish percona#9 ha_commit_low percona#10 trx_coordinator::commit_in_engines percona#11 MYSQL_BIN_LOG::commit percona#12 ha_commit_trans percona#13 trans_commit percona#14 Xid_log_event::do_commit percona#15 Xid_apply_log_event::do_apply_event_worker percona#16 Slave_worker::slave_worker_exec_event percona#17 slave_worker_exec_job_group percona#18 handle_slave_worker 14. If the applier thread continues without releasing the lock, then at a later stage, it can perform recursive locking while setting the GTID for the next transaction (in set_gtid_next()). In debug builds the above case hits the assertion `safe_mutex_assert_not_owner()` meaning the lock is already acquired by the replica applier thread when it tries to re-acquire the lock. Solution -------- In the above problematic example, when seen from each thread individually, we can conclude that there is no problem in the order of lock acquisition, thus there is no need to change the lock order. However, the root cause for this problem is that multiple threads can concurrently access to the array `Gtid_state::commit_group_sidnos`. In its initial implementation, it was expected that threads should hold the `MYSQL_BIN_LOG::LOCK_commit` before modifying its contents. But it was not considered when upstream implemented WL#7846 (MTS: slave-preserve-commit-order when log-slave-updates/binlog is disabled). With this patch, we now ensure that `MYSQL_BIN_LOG::LOCK_commit` is acquired when the client thread (binlog flush leader) when it tries to perform GTID update on behalf of threads waiting in "Commit Order" queue, thus providing a guarantee that `Gtid_state::commit_group_sidnos` array is never accessed without the protection of `MYSQL_BIN_LOG::LOCK_commit`.

… for connection xxx'. The new iterator based explains are not impacted. The issue here is a race condition. More than one thread is using the query term iterator at the same time (whoch is neithe threas safe nor reantrant), and part of its state is in the query terms being visited which leads to interference/race conditions. a) the explain thread uses an iterator here: Sql_cmd_explain_other_thread::execute is inspecting the Query_expression of the running query calling master_query_expression()->find_blocks_query_term which uses an iterator over the query terms in the query expression: for (auto qt : query_terms<>()) { if (qt->query_block() == qb) { return qt; } } the above search fails to find qb due to the interference of the thread b), see below, and then tries to access a nullpointer: * thread percona#36, name = ‘connection’, stop reason = EXC_BAD_ACCESS (code=1, address=0x0) frame #0: 0x000000010bb3cf0d mysqld`Query_block::type(this=0x00007f8f82719088) const at sql_lex.cc:4441:11 frame #1: 0x000000010b83763e mysqld`(anonymous namespace)::Explain::explain_select_type(this=0x00007000020611b8) at opt_explain.cc:792:50 frame #2: 0x000000010b83cc4d mysqld`(anonymous namespace)::Explain_join::explain_select_type(this=0x00007000020611b8) at opt_explain.cc:1487:21 frame #3: 0x000000010b837c34 mysqld`(anonymous namespace)::Explain::prepare_columns(this=0x00007000020611b8) at opt_explain.cc:744:26 frame #4: 0x000000010b83ea0e mysqld`(anonymous namespace)::Explain_join::explain_qep_tab(this=0x00007000020611b8, tabnum=0) at opt_explain.cc:1415:32 frame #5: 0x000000010b83ca0a mysqld`(anonymous namespace)::Explain_join::shallow_explain(this=0x00007000020611b8) at opt_explain.cc:1364:9 frame percona#6: 0x000000010b83379b mysqld`(anonymous namespace)::Explain::send(this=0x00007000020611b8) at opt_explain.cc:770:14 frame percona#7: 0x000000010b834147 mysqld`explain_query_specification(explain_thd=0x00007f8fbb111e00, query_thd=0x00007f8fbb919c00, query_term=0x00007f8f82719088, ctx=CTX_JOIN) at opt_explain.cc:2088:20 frame percona#8: 0x000000010bd36b91 mysqld`Query_expression::explain_query_term(this=0x00007f8f7a090360, explain_thd=0x00007f8fbb111e00, query_thd=0x00007f8fbb919c00, qt=0x00007f8f82719088) at sql_union.cc:1519:11 frame percona#9: 0x000000010bd36c68 mysqld`Query_expression::explain_query_term(this=0x00007f8f7a090360, explain_thd=0x00007f8fbb111e00, query_thd=0x00007f8fbb919c00, qt=0x00007f8f8271d748) at sql_union.cc:1526:13 frame percona#10: 0x000000010bd373f7 mysqld`Query_expression::explain(this=0x00007f8f7a090360, explain_thd=0x00007f8fbb111e00, query_thd=0x00007f8fbb919c00) at sql_union.cc:1591:7 frame percona#11: 0x000000010b835820 mysqld`mysql_explain_query_expression(explain_thd=0x00007f8fbb111e00, query_thd=0x00007f8fbb919c00, unit=0x00007f8f7a090360) at opt_explain.cc:2392:17 frame percona#12: 0x000000010b835400 mysqld`explain_query(explain_thd=0x00007f8fbb111e00, query_thd=0x00007f8fbb919c00, unit=0x00007f8f7a090360) at opt_explain.cc:2353:13 * frame percona#13: 0x000000010b8363e4 mysqld`Sql_cmd_explain_other_thread::execute(this=0x00007f8fba585b68, thd=0x00007f8fbb111e00) at opt_explain.cc:2531:11 frame percona#14: 0x000000010bba7d8b mysqld`mysql_execute_command(thd=0x00007f8fbb111e00, first_level=true) at sql_parse.cc:4648:29 frame percona#15: 0x000000010bb9e230 mysqld`dispatch_sql_command(thd=0x00007f8fbb111e00, parser_state=0x0000700002065de8) at sql_parse.cc:5303:19 frame percona#16: 0x000000010bb9a4cb mysqld`dispatch_command(thd=0x00007f8fbb111e00, com_data=0x0000700002066e38, command=COM_QUERY) at sql_parse.cc:2135:7 frame percona#17: 0x000000010bb9c846 mysqld`do_command(thd=0x00007f8fbb111e00) at sql_parse.cc:1464:18 frame percona#18: 0x000000010b2f2574 mysqld`handle_connection(arg=0x0000600000e34200) at connection_handler_per_thread.cc:304:13 frame percona#19: 0x000000010e072fc4 mysqld`pfs_spawn_thread(arg=0x00007f8fba8160b0) at pfs.cc:3051:3 frame percona#20: 0x00007ff806c2b202 libsystem_pthread.dylib`_pthread_start + 99 frame percona#21: 0x00007ff806c26bab libsystem_pthread.dylib`thread_start + 15 b) the query thread being explained is itself performing LEX::cleanup and as part of the iterates over the query terms, but still allows EXPLAIN of the query plan since thd->query_plan.set_query_plan(SQLCOM_END, ...) hasn't been called yet. 20:frame: Query_terms<(Visit_order)1, (Visit_leaves)0>::Query_term_iterator::operator++() (in mysqld) (query_term.h:613) 21:frame: Query_expression::cleanup(bool) (in mysqld) (sql_union.cc:1861) 22:frame: LEX::cleanup(bool) (in mysqld) (sql_lex.h:4286) 30:frame: Sql_cmd_dml::execute(THD*) (in mysqld) (sql_select.cc:799) 31:frame: mysql_execute_command(THD*, bool) (in mysqld) (sql_parse.cc:4648) 32:frame: dispatch_sql_command(THD*, Parser_state*) (in mysqld) (sql_parse.cc:5303) 33:frame: dispatch_command(THD*, COM_DATA const*, enum_server_command) (in mysqld) (sql_parse.cc:2135) 34:frame: do_command(THD*) (in mysqld) (sql_parse.cc:1464) 57:frame: handle_connection(void*) (in mysqld) (connection_handler_per_thread.cc:304) 58:frame: pfs_spawn_thread(void*) (in mysqld) (pfs.cc:3053) 65:frame: _pthread_start (in libsystem_pthread.dylib) + 99 66:frame: thread_start (in libsystem_pthread.dylib) + 15 Solution: This patch solves the issue by removing iterator state from Query_term, making the query_term iterators thread safe. This solution labels every child query_term with its index in its parent's m_children vector. The iterator can therefore easily compute the next child to visit based on Query_term::m_sibling_idx. A unit test case is added to check reentrancy. One can also manually verify that we have no remaining race condition by running two client connections files (with \. <file>) with a big number of copies of the repro query in one connection and a big number of EXPLAIN format=json FOR <connection>, e.g. EXPLAIN FORMAT=json FOR CONNECTION 8\G in the other. The actual connection number would need to verified in connection one, of course. Change-Id: Ie7d56610914738ccbbecf399ccc4f465f7d26ea7

This is a combination of 5 commits. This is the 1st commit message: WL#15746: TLS Enhancements for HeatWave-AutoML & Dask Comm. Upgrade Problem: -------- - HeatWave-AutoML communication was unauthenticated, unauthorized, and unencrypted. - Dask communication utilized TCP, not aligning with FedRamp guidelines. Solution: --------- - Introduced TLS and mTLS in HeatWave-AutoML's plugin and driver for authentication, authorization, and encryption. - Applied TLS to Dask to ensure authentication, encryption, and authorization. Dask Authorization (OCID-based): -------------------------------- 1. For each DBsystem: - MySQL node sends OCIDs of authorized nodes to the head driver via: a. rapid_net_nodes b. rapid_net_allowed_ocids (older API, mainly for MTR tests) - Scenarios: a. All OCIDs provided: Dask authorizes. b. Any OCID absent: ML call fails with message. 2. During Dask worker registration to the Dask scheduler, a script is dispatched to the Dask worker for execution, retrieving the worker's OCID for authorization purposes. - If the OCID isn't approved, the connection is denied, terminating the worker and causing the ML query to fail. 3. For every Dask worker (both as listener and connector), an OCID- based authorization is performed post SSL/TLS connection handshake. The process compares the OCID from the peer's certificate against the allowed_ocids received from the HeatWave-AutoML MySQL plugin. HWAML Plugin Changes: --------------------- - Sourced certificate data and SSL setup from disk, incorporating SSL/TLS for HWAML. - Reused "keystore" variable to specify disk location for certificate retrieval. - Certificates and keys expected in PKCS12 format. - Introduced "have_ml_encryption" variable (default=0). > Acts as a switch to explicitly deactivate HWAML network encryption, akin to "disable_net_encryption" affecting network encryption for HeatWave. Set to 1 to enable. - Introduced a customized verifier function for verify_callback to be set in SSL_CTX_set_verify and used in the handshake process of SSL/TLS. The customized verifier function will perform instance id (OCID) based authorization on the plugin side during standard SSL/TLS handshake process. - CRL (Certificate Revocation List) checks are also conducted if CRL Distribution Points are present and accessible in the provided certificate. HWAML Driver Changes & OCID-based Authorization: ------------------------------------------------ - Introduced "enable_encryption" (default=0). > Set to 1 to enable encryption. - When receiving a new connection request and encryption is on, the driver performs OCID-based self-checking, comparing OCID retrieved from its own instance principal with the OCID in the provided certificate on disk. - The driver compares OCID from "mysql_compute_id" and extracted OCID from mTLS certificate during connection. - Introduced "cert_dir" argument for certificate directory specification. - Expected files: cert_chain.pem, certificate.pem, private_key.pem. > OCID should be in the userID (UID) or CN field of the certificate.pem subject. - CRL (Certificate Revocation List) checks are also conducted post handshake, if CRL Distribution Points are present and accessible in the provided certificate, alongside OCID authorization. Encryption Behavior: -------------------- - If encryption is deactivated on both plugin and driver side, HWAML will work without encryption as it was before this commit. Enabling Encryption: -------------------- - By default, "have_ml_encryption" and "enable_encryption" are set to 0 > Encryption is disabled by default. - For the HWAML plugin: > "have_ml_encryption" set to 1 (default is 0). > Specify the .pfx file's path using the "keystore". - For the HWAML Driver: > "enable_encryption" set to 1 (default is 0) > Specify "mysql_instance_id" and "cert_dir". Testing: -------- - MTR has been modified for the encryption setup. > Runs with encryption if "OCI_INSTANCE_ID" is set to a valid value. - On OCI (when "OLRAPID_KEYSTORE" is not set): > Certificates and keys are generated; PEMs for driver and PKCS12 for plugin. - On AWS (when "OLRAPID_KEYSTORE" is set as the path to PKCS12 keystore files): > PEM files are extracted from the provided PKCS12 and used for the driver. The plugin uses the provided PKCS12 keystore file. Change-Id: I553ca135241e03484db6debbe186e6d34d582bf4 This is the commit message #2: WL#15746 - Adding ML encryption support to BM Enabling ML encryption on Baumeister: - Certificates are generated on MySQLd during initialization - Needed certicates for workers are packaged and sent to worker nodes - Workers use packaged files to generate their certificates - Arguments are added to driver.py invoke - Keystore path is added to mysql config Change-Id: I11a5cc5926488ff4fbf91bb6c10a091358db7dc9 This is the commit message #3: WL#15746: Enhanced CRL Daemon Checker Issue ===== The previous design assumed a plain HTTPS link for the CRL distribution point, accessible to all. This assumption no longer holds, as public accessibility for CRL distribution contradicts OCI guidelines. Now, the CRL distribution point in certificates provided by the control plane is expected to be protected by OCI Instance Principal Authentication. However, using this authentication method introduces a delay of several seconds, which is impractical for HeatWave-AutoML. Solution ======== The CRL fetching code now uses OCI Instance Principal Authentication. To mitigate performance issues, the CRL checking process has been redesigned. Instead of enforcing CRL checks per connection in MySQL Plugin and HeatWave-AutoML Driver communications, a daemon thread in HeatWave-AutoML Driver, Dask scheduler, and Dask Worker now periodically fetches and verifies the CRL against all active connections. This separation minimizes performance impacts. Consequently, MySQL Plugin's CRL checks have been removed, as checks in the Driver, Scheduler, and Worker sufficiently cover all cluster nodes. Changes ======= - Implemented CRL checker as a daemon thread in Driver, Scheduler, and Worker. - Each connection/socket has an associated CRL checker. - CRL checks occur periodically at set intervals. - Skips CRL check if the CRL is temporarily unavailable. - Failing a CRL check results in the associated connection/socket being closed. On the Driver, a stop event is triggered (akin to CTRL-C). Change-Id: Id998cfe9e15d9236291b0ae420d65c2197837966 This is the commit message #4: WL#15746: Fix Dask workers being shutdown without releasing address Issue ===== Dask workers getting shutting but not releasing the address used properly sometimes. Solution ======== Reverted some changes in heatwave_cluster.py in dask worker shutdown function. Hopefully this will fix the address issue Change-Id: I5a6749b5a25b0ccb73ba7369e545bc010da1b84f This is the commit message #5: WL#15746: Implement Dask Worker Join Timeout for Head Node Issue: ====== In the cluster_shutdown method, the join operation on the head node's worker process lacked a timeout. This led to potential indefinite waiting and eventual hanging of the head node. Solution: ========= A timeout has been introduced for the worker process join on the head node. Unlike non-head nodes, which rely on worker join to complete Dask tasks and cannot have a timeout, the head node can safely implement this. Now, if the worker process on the head node fails to shut down post-join, indicating a timeout, it will be manually terminated. This ensures proper release of associated resources and prevents hanging of the head node. Additional Change: ================== Added Cert Rotation Guard for DASK clusters. This feature initiates on the first plugin-driver connection when the DASK cluster is off, recording the certificate's expiry date. During driver idle times, it checks the current cert's expiry against this date. If it detects a change, indicating a certificate rotation, it shuts down the DASK cluster. The cluster restarts on the next connection request, ensuring the use of the latest certificate. Change-Id: Ie63a2e2b7664e05e1622d8bd6503663e13fa73cb

Upstream commit ID : fb-mysql-5.6.35/8cb1dc836b68f1f13e8b2655b2b8cb2d57f400b3 PS-5217 : Merge fb-prod201803 Summary: Original report: https://jira.mariadb.org/browse/MDEV-15816 To reproduce this bug just following below steps, client 1: USE test; CREATE TABLE t1 (i INT) ENGINE=MyISAM; HANDLER t1 OPEN h; CREATE TABLE t2 (i INT) ENGINE=RocksDB; LOCK TABLES t2 WRITE; client 2: FLUSH TABLES WITH READ LOCK; client 1: INSERT INTO t2 VALUES (1); So client 1 acquired the lock and set m_lock_rows = RDB_LOCK_WRITE. Then client 2 calls store_lock(TL_IGNORE) and m_lock_rows was wrongly set to RDB_LOCK_NONE, as below ``` #0 myrocks::ha_rocksdb::store_lock (this=0x7fffbc03c7c8, thd=0x7fffc0000ba0, to=0x7fffc0011220, lock_type=TL_IGNORE) #1 get_lock_data (thd=0x7fffc0000ba0, table_ptr=0x7fffe84b7d20, count=1, flags=2) #2 mysql_lock_abort_for_thread (thd=0x7fffc0000ba0, table=0x7fffbc03bbc0) #3 THD::notify_shared_lock (this=0x7fffc0000ba0, ctx_in_use=0x7fffbc000bd8, needs_thr_lock_abort=true) #4 MDL_lock::notify_conflicting_locks (this=0x555557a82380, ctx=0x7fffc0000cc8) #5 MDL_context::acquire_lock (this=0x7fffc0000cc8, mdl_request=0x7fffe84b8350, lock_wait_timeout=2) percona#6 Global_read_lock::lock_global_read_lock (this=0x7fffc0003fe0, thd=0x7fffc0000ba0) ``` Finally, client 1 "INSERT INTO..." hits the Assertion 'm_lock_rows == RDB_LOCK_WRITE' failed in myrocks::ha_rocksdb::write_row() Fix this bug by not setting m_locks_rows if lock_type == TL_IGNORE. Closes facebook/mysql-5.6#838 Pull Request resolved: facebook/mysql-5.6#871 Differential Revision: D9417382 Pulled By: lth fbshipit-source-id: c36c164e06c

…s=0 and a local DDL executed https://perconadev.atlassian.net/browse/PS-9018 Problem ------- In high concurrency scenarios, MySQL replica can enter into a deadlock due to a race condition between the replica applier thread and the client thread performing a binlog group commit. Analysis -------- It needs at least 3 threads for this deadlock to happen 1. One client thread 2. Two replica applier threads How this deadlock happens? -------------------------- 0. Binlog is enabled on replica, but log_replica_updates is disabled. 1. Initially, both "Commit Order" and "Binlog Flush" queues are empty. 2. Replica applier thread 1 enters the group commit pipeline to register in the "Commit Order" queue since `log-replica-updates` is disabled on the replica node. 3. Since both "Commit Order" and "Binlog Flush" queues are empty, the applier thread 1 3.1. Becomes leader (In Commit_stage_manager::enroll_for()). 3.2. Registers in the commit order queue. 3.3. Acquires the lock MYSQL_BIN_LOG::LOCK_log. 3.4. Commit Order queue is emptied, but the lock MYSQL_BIN_LOG::LOCK_log is not yet released. NOTE: SE commit for applier thread is already done by the time it reaches here. 4. Replica applier thread 2 enters the group commit pipeline to register in the "Commit Order" queue since `log-replica-updates` is disabled on the replica node. 5. Since the "Commit Order" queue is empty (emptied by applier thread 1 in 3.4), the applier thread 2 5.1. Becomes leader (In Commit_stage_manager::enroll_for()) 5.2. Registers in the commit order queue. 5.3. Tries to acquire the lock MYSQL_BIN_LOG::LOCK_log. Since it is held by applier thread 1 it will wait until the lock is released. 6. Client thread enters the group commit pipeline to register in the "Binlog Flush" queue. 7. Since "Commit Order" queue is not empty (there is applier thread 2 in the queue), it enters the conditional wait `m_stage_cond_leader` with an intention to become the leader for both the "Binlog Flush" and "Commit Order" queues. 8. Applier thread 1 releases the lock MYSQL_BIN_LOG::LOCK_log and proceeds to update the GTID by calling gtid_state->update_commit_group() from Commit_order_manager::flush_engine_and_signal_threads(). 9. Applier thread 2 acquires the lock MYSQL_BIN_LOG::LOCK_log. 9.1. It checks if there is any thread waiting in the "Binlog Flush" queue to become the leader. Here it finds the client thread waiting to be the leader. 9.2. It releases the lock MYSQL_BIN_LOG::LOCK_log and signals on the cond_var `m_stage_cond_leader` and enters a conditional wait until the thread's `tx_commit_pending` is set to false by the client thread (will be done in the Commit_stage_manager::process_final_stage_for_ordered_commit_group() called by client thread from fetch_and_process_flush_stage_queue()). 10. The client thread wakes up from the cond_var `m_stage_cond_leader`. The thread has now become a leader and it is its responsibility to update GTID of applier thread 2. 10.1. It acquires the lock MYSQL_BIN_LOG::LOCK_log. 10.2. Returns from `enroll_for()` and proceeds to process the "Commit Order" and "Binlog Flush" queues. 10.3. Fetches the "Commit Order" and "Binlog Flush" queues. 10.4. Performs the storage engine flush by calling ha_flush_logs() from fetch_and_process_flush_stage_queue(). 10.5. Proceeds to update the GTID of threads in "Commit Order" queue by calling gtid_state->update_commit_group() from Commit_stage_manager::process_final_stage_for_ordered_commit_group(). 11. At this point, we will have - Client thread performing GTID update on behalf if applier thread 2 (from step 10.5), and - Applier thread 1 performing GTID update for itself (from step 8). Due to the lack of proper synchronization between the above two threads, there exists a time window where both threads can call gtid_state->update_commit_group() concurrently. In subsequent steps, both threads simultaneously try to modify the contents of the array `commit_group_sidnos` which is used to track the lock status of sidnos. This concurrent access to `update_commit_group()` can cause a lock-leak resulting in one thread acquiring the sidno lock and not releasing at all. ----------------------------------------------------------------------------------------------------------- Client thread Applier Thread 1 ----------------------------------------------------------------------------------------------------------- update_commit_group() => global_sid_lock->rdlock(); update_commit_group() => global_sid_lock->rdlock(); calls update_gtids_impl_lock_sidnos() calls update_gtids_impl_lock_sidnos() set commit_group_sidno[2] = true set commit_group_sidno[2] = true lock_sidno(2) -> successful lock_sidno(2) -> waits update_gtids_impl_own_gtid() -> Add the thd->owned_gtid in `executed_gtids()` if (commit_group_sidnos[2]) { unlock_sidno(2); commit_group_sidnos[2] = false; } Applier thread continues.. lock_sidno(2) -> successful update_gtids_impl_own_gtid() -> Add the thd->owned_gtid in `executed_gtids()` if (commit_group_sidnos[2]) { <=== this check fails and lock is not released. unlock_sidno(2); commit_group_sidnos[2] = false; } Client thread continues without releasing the lock ----------------------------------------------------------------------------------------------------------- 12. As the above lock-leak can also happen the other way i.e, the applier thread fails to unlock, there can be different consequences hereafter. 13. If the client thread continues without releasing the lock, then at a later stage, it can enter into a deadlock with the applier thread performing a GTID update with stack trace. Client_thread ------------- #1 __GI___lll_lock_wait #2 ___pthread_mutex_lock #3 native_mutex_lock <= waits for commit lock while holding sidno lock #4 Commit_stage_manager::enroll_for #5 MYSQL_BIN_LOG::change_stage percona#6 MYSQL_BIN_LOG::ordered_commit percona#7 MYSQL_BIN_LOG::commit percona#8 ha_commit_trans percona#9 trans_commit_implicit percona#10 mysql_create_like_table percona#11 Sql_cmd_create_table::execute percona#12 mysql_execute_command percona#13 dispatch_sql_command Applier thread -------------- #1 ___pthread_mutex_lock #2 native_mutex_lock #3 safe_mutex_lock #4 Gtid_state::update_gtids_impl_lock_sidnos <= waits for sidno lock #5 Gtid_state::update_commit_group percona#6 Commit_order_manager::flush_engine_and_signal_threads <= acquires commit lock here percona#7 Commit_order_manager::finish percona#8 Commit_order_manager::wait_and_finish percona#9 ha_commit_low percona#10 trx_coordinator::commit_in_engines percona#11 MYSQL_BIN_LOG::commit percona#12 ha_commit_trans percona#13 trans_commit percona#14 Xid_log_event::do_commit percona#15 Xid_apply_log_event::do_apply_event_worker percona#16 Slave_worker::slave_worker_exec_event percona#17 slave_worker_exec_job_group percona#18 handle_slave_worker 14. If the applier thread continues without releasing the lock, then at a later stage, it can perform recursive locking while setting the GTID for the next transaction (in set_gtid_next()). In debug builds the above case hits the assertion `safe_mutex_assert_not_owner()` meaning the lock is already acquired by the replica applier thread when it tries to re-acquire the lock. Solution -------- In the above problematic example, when seen from each thread individually, we can conclude that there is no problem in the order of lock acquisition, thus there is no need to change the lock order. However, the root cause for this problem is that multiple threads can concurrently access to the array `Gtid_state::commit_group_sidnos`. In its initial implementation, it was expected that threads should hold the `MYSQL_BIN_LOG::LOCK_commit` before modifying its contents. But it was not considered when upstream implemented WL#7846 (MTS: slave-preserve-commit-order when log-slave-updates/binlog is disabled). With this patch, we now ensure that `MYSQL_BIN_LOG::LOCK_commit` is acquired when the client thread (binlog flush leader) when it tries to perform GTID update on behalf of threads waiting in "Commit Order" queue, thus providing a guarantee that `Gtid_state::commit_group_sidnos` array is never accessed without the protection of `MYSQL_BIN_LOG::LOCK_commit`.

PS-5741: Incorrect use of memset_s in keyring_vault. Fixed the usage of memset_s. The arguments should be: void memset_s(void *dest, size_t dest_max, int c, size_t n) where the 2nd argument is size of buffer and the 3rd is argument is character to fill. --------------------------------------------------------------------------- PS-7769 - Fix use-after-return error in audit_log_exclude_accounts_validate --- *Problem:* `st_mysql_value::val_str` might return a pointer to `buf` which after the function called is deleted. Therefore the value in `save`, after reuturnin from the function, is invalid. In this particular case, the error is not manifesting as val_str` returns memory allocated with `thd_strmake` and it does not use `buf`. *Solution:* Allocate memory with `thd_strmake` so the memory in `save` is not local. --------------------------------------------------------------------------- Fix test main.bug12969156 when WITH_ASAN=ON *Problem:* ASAN complains about stack-buffer-overflow on function `mysql_heartbeat`: ``` ==90890==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7fe746d06d14 at pc 0x7fe760f5b017 bp 0x7fe746d06cd0 sp 0x7fe746d06478 WRITE of size 24 at 0x7fe746d06d14 thread T16777215 Address 0x7fe746d06d14 is located in stack of thread T26 at offset 340 in frame #0 0x7fe746d0a55c in mysql_heartbeat(void*) /home/yura/ws/percona-server/plugin/daemon_example/daemon_example.cc:62 This frame has 4 object(s): [48, 56) 'result' (line 66) [80, 112) '_db_stack_frame_' (line 63) [144, 200) 'tm_tmp' (line 67) [240, 340) 'buffer' (line 65) <== Memory access at offset 340 overflows this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork (longjmp and C++ exceptions *are* supported) Thread T26 created by T25 here: #0 0x7fe760f5f6d5 in __interceptor_pthread_create ../../../../src/libsanitizer/asan/asan_interceptors.cpp:216 #1 0x557ccbbcb857 in my_thread_create /home/yura/ws/percona-server/mysys/my_thread.c:104 #2 0x7fe746d0b21a in daemon_example_plugin_init /home/yura/ws/percona-server/plugin/daemon_example/daemon_example.cc:148 #3 0x557ccb4c69c7 in plugin_initialize /home/yura/ws/percona-server/sql/sql_plugin.cc:1279 #4 0x557ccb4d19cd in mysql_install_plugin /home/yura/ws/percona-server/sql/sql_plugin.cc:2279 #5 0x557ccb4d218f in Sql_cmd_install_plugin::execute(THD*) /home/yura/ws/percona-server/sql/sql_plugin.cc:4664 percona#6 0x557ccb47695e in mysql_execute_command(THD*, bool) /home/yura/ws/percona-server/sql/sql_parse.cc:5160 percona#7 0x557ccb47977c in mysql_parse(THD*, Parser_state*, bool) /home/yura/ws/percona-server/sql/sql_parse.cc:5952 percona#8 0x557ccb47b6c2 in dispatch_command(THD*, COM_DATA const*, enum_server_command) /home/yura/ws/percona-server/sql/sql_parse.cc:1544 percona#9 0x557ccb47de1d in do_command(THD*) /home/yura/ws/percona-server/sql/sql_parse.cc:1065 percona#10 0x557ccb6ac294 in handle_connection /home/yura/ws/percona-server/sql/conn_handler/connection_handler_per_thread.cc:325 percona#11 0x557ccbbfabb0 in pfs_spawn_thread /home/yura/ws/percona-server/storage/perfschema/pfs.cc:2198 percona#12 0x7fe760ab544f in start_thread nptl/pthread_create.c:473 ``` The reason is that `my_thread_cancel` is used to finish the daemon thread. This is not and orderly way of finishing the thread. ASAN does not register the stack variables are not used anymore which generates the error above. This is a benign error as all the variables are on the stack. *Solution*: Finish the thread in orderly way by using a signalling variable. --------------------------------------------------------------------------- PS-8204: Fix XML escape rules for audit plugin https://jira.percona.com/browse/PS-8204 There was a wrong length specified for some XML escape rules. As a result of this terminating null symbol from replacement rule was copied into resulting string. This lead to quer text truncation in audit log file. In addition added empty replacement rules for '\b' and 'f' symbols which just remove them from resulting string. These symboles are not supported in XML 1.0. --------------------------------------------------------------------------- PS-8854: Add main.percona_udf MTR test Add a test to check FNV1A_64, FNV_64, and MURMUR_HASH user-defined functions. --------------------------------------------------------------------------- PS-9218: Merge MySQL 8.4.0 (fix gcc-14 build) https://perconadev.atlassian.net/browse/PS-9218

…n read() syscall over network https://jira.percona.com/browse/PS-8592 Description ----------- GR suffered from problems caused by the security probes and network scanner processes connecting to the group replication communication port. This usually is not a problem, but poses a serious threat when another member tries to join the cluster by initialting a connection to the member which is affected by external processes using the port dedicated for group communication for longer durations. On such activites by external processes, the SSL enabled server stalled forever on the SSL_accept() call waiting for handshake data. Below is the stacktrace: Thread 55 (Thread 0x7f7bb77ff700 (LWP 2198598)): #0 in read () #1 in sock_read () #2 in BIO_read () #3 in ssl23_read_bytes () #4 in ssl23_get_client_hello () #5 in ssl23_accept () percona#6 in xcom_tcp_server_startup(Xcom_network_provider*) () When the server stalled in the above path forever, it prohibited other members to join the cluster resulting in the following messages on the joiner server's logs. [ERROR] [MY-011640] [Repl] Plugin group_replication reported: 'Timeout on wait for view after joining group' [ERROR] [MY-011735] [Repl] Plugin group_replication reported: '[GCS] The member is already leaving or joining a group.' Solution -------- This patch adds two new variables 1. group_replication_xcom_ssl_socket_timeout It is a file-descriptor level timeout in seconds for both accept() and SSL_accept() calls when group replication is listening on the xcom port. When set to a valid value, say for example 5 seconds, both accept() and SSL_accept() return after 5 seconds. The default value has been set to 0 (waits infinitely) for backward compatibility. This variable is effective only when GR is configred with SSL. 2. group_replication_xcom_ssl_accept_retries It defines the number of retries to be performed before closing the socket. For each retry the server thread calls SSL_accept() with timeout defined by the group_replication_xcom_ssl_socket_timeout for the SSL handshake process once the connection has been accepted by the first accept() call. The default value has been set to 10. This variable is effective only when GR is configred with SSL. Note: - Both of the above variables are dynamically configurable, but will become effective only on START GROUP_REPLICATION. ------------------------------------------------------------------------- PS-8844: Fix the failing main.mysqldump_gtid_purged https://jira.percona.com/browse/PS-8844 This patch fixes the test failure of main.mysqldump_gtid_purged that failed due to the uninitialized variable $redirect_stderr in the start_proc_in_background.inc. ---------------------------------------------------------------------- PS-9218: Merge MySQL 8.4.0 (fix terminology in replication tests) https://perconadev.atlassian.net/browse/PS-9218 mysql/mysql-server@44a77b5

Upstream commit ID : fb-mysql-5.6.35/8cb1dc836b68f1f13e8b2655b2b8cb2d57f400b3 PS-5217 : Merge fb-prod201803 Summary: Original report: https://jira.mariadb.org/browse/MDEV-15816 To reproduce this bug just following below steps, client 1: USE test; CREATE TABLE t1 (i INT) ENGINE=MyISAM; HANDLER t1 OPEN h; CREATE TABLE t2 (i INT) ENGINE=RocksDB; LOCK TABLES t2 WRITE; client 2: FLUSH TABLES WITH READ LOCK; client 1: INSERT INTO t2 VALUES (1); So client 1 acquired the lock and set m_lock_rows = RDB_LOCK_WRITE. Then client 2 calls store_lock(TL_IGNORE) and m_lock_rows was wrongly set to RDB_LOCK_NONE, as below ``` #0 myrocks::ha_rocksdb::store_lock (this=0x7fffbc03c7c8, thd=0x7fffc0000ba0, to=0x7fffc0011220, lock_type=TL_IGNORE) #1 get_lock_data (thd=0x7fffc0000ba0, table_ptr=0x7fffe84b7d20, count=1, flags=2) #2 mysql_lock_abort_for_thread (thd=0x7fffc0000ba0, table=0x7fffbc03bbc0) #3 THD::notify_shared_lock (this=0x7fffc0000ba0, ctx_in_use=0x7fffbc000bd8, needs_thr_lock_abort=true) #4 MDL_lock::notify_conflicting_locks (this=0x555557a82380, ctx=0x7fffc0000cc8) #5 MDL_context::acquire_lock (this=0x7fffc0000cc8, mdl_request=0x7fffe84b8350, lock_wait_timeout=2) percona#6 Global_read_lock::lock_global_read_lock (this=0x7fffc0003fe0, thd=0x7fffc0000ba0) ``` Finally, client 1 "INSERT INTO..." hits the Assertion 'm_lock_rows == RDB_LOCK_WRITE' failed in myrocks::ha_rocksdb::write_row() Fix this bug by not setting m_locks_rows if lock_type == TL_IGNORE. Closes facebook/mysql-5.6#838 Pull Request resolved: facebook/mysql-5.6#871 Differential Revision: D9417382 Pulled By: lth fbshipit-source-id: c36c164e06c

…s=0 and a local DDL executed https://perconadev.atlassian.net/browse/PS-9018 Problem ------- In high concurrency scenarios, MySQL replica can enter into a deadlock due to a race condition between the replica applier thread and the client thread performing a binlog group commit. Analysis -------- It needs at least 3 threads for this deadlock to happen 1. One client thread 2. Two replica applier threads How this deadlock happens? -------------------------- 0. Binlog is enabled on replica, but log_replica_updates is disabled. 1. Initially, both "Commit Order" and "Binlog Flush" queues are empty. 2. Replica applier thread 1 enters the group commit pipeline to register in the "Commit Order" queue since `log-replica-updates` is disabled on the replica node. 3. Since both "Commit Order" and "Binlog Flush" queues are empty, the applier thread 1 3.1. Becomes leader (In Commit_stage_manager::enroll_for()). 3.2. Registers in the commit order queue. 3.3. Acquires the lock MYSQL_BIN_LOG::LOCK_log. 3.4. Commit Order queue is emptied, but the lock MYSQL_BIN_LOG::LOCK_log is not yet released. NOTE: SE commit for applier thread is already done by the time it reaches here. 4. Replica applier thread 2 enters the group commit pipeline to register in the "Commit Order" queue since `log-replica-updates` is disabled on the replica node. 5. Since the "Commit Order" queue is empty (emptied by applier thread 1 in 3.4), the applier thread 2 5.1. Becomes leader (In Commit_stage_manager::enroll_for()) 5.2. Registers in the commit order queue. 5.3. Tries to acquire the lock MYSQL_BIN_LOG::LOCK_log. Since it is held by applier thread 1 it will wait until the lock is released. 6. Client thread enters the group commit pipeline to register in the "Binlog Flush" queue. 7. Since "Commit Order" queue is not empty (there is applier thread 2 in the queue), it enters the conditional wait `m_stage_cond_leader` with an intention to become the leader for both the "Binlog Flush" and "Commit Order" queues. 8. Applier thread 1 releases the lock MYSQL_BIN_LOG::LOCK_log and proceeds to update the GTID by calling gtid_state->update_commit_group() from Commit_order_manager::flush_engine_and_signal_threads(). 9. Applier thread 2 acquires the lock MYSQL_BIN_LOG::LOCK_log. 9.1. It checks if there is any thread waiting in the "Binlog Flush" queue to become the leader. Here it finds the client thread waiting to be the leader. 9.2. It releases the lock MYSQL_BIN_LOG::LOCK_log and signals on the cond_var `m_stage_cond_leader` and enters a conditional wait until the thread's `tx_commit_pending` is set to false by the client thread (will be done in the Commit_stage_manager::process_final_stage_for_ordered_commit_group() called by client thread from fetch_and_process_flush_stage_queue()). 10. The client thread wakes up from the cond_var `m_stage_cond_leader`. The thread has now become a leader and it is its responsibility to update GTID of applier thread 2. 10.1. It acquires the lock MYSQL_BIN_LOG::LOCK_log. 10.2. Returns from `enroll_for()` and proceeds to process the "Commit Order" and "Binlog Flush" queues. 10.3. Fetches the "Commit Order" and "Binlog Flush" queues. 10.4. Performs the storage engine flush by calling ha_flush_logs() from fetch_and_process_flush_stage_queue(). 10.5. Proceeds to update the GTID of threads in "Commit Order" queue by calling gtid_state->update_commit_group() from Commit_stage_manager::process_final_stage_for_ordered_commit_group(). 11. At this point, we will have - Client thread performing GTID update on behalf if applier thread 2 (from step 10.5), and - Applier thread 1 performing GTID update for itself (from step 8). Due to the lack of proper synchronization between the above two threads, there exists a time window where both threads can call gtid_state->update_commit_group() concurrently. In subsequent steps, both threads simultaneously try to modify the contents of the array `commit_group_sidnos` which is used to track the lock status of sidnos. This concurrent access to `update_commit_group()` can cause a lock-leak resulting in one thread acquiring the sidno lock and not releasing at all. ----------------------------------------------------------------------------------------------------------- Client thread Applier Thread 1 ----------------------------------------------------------------------------------------------------------- update_commit_group() => global_sid_lock->rdlock(); update_commit_group() => global_sid_lock->rdlock(); calls update_gtids_impl_lock_sidnos() calls update_gtids_impl_lock_sidnos() set commit_group_sidno[2] = true set commit_group_sidno[2] = true lock_sidno(2) -> successful lock_sidno(2) -> waits update_gtids_impl_own_gtid() -> Add the thd->owned_gtid in `executed_gtids()` if (commit_group_sidnos[2]) { unlock_sidno(2); commit_group_sidnos[2] = false; } Applier thread continues.. lock_sidno(2) -> successful update_gtids_impl_own_gtid() -> Add the thd->owned_gtid in `executed_gtids()` if (commit_group_sidnos[2]) { <=== this check fails and lock is not released. unlock_sidno(2); commit_group_sidnos[2] = false; } Client thread continues without releasing the lock ----------------------------------------------------------------------------------------------------------- 12. As the above lock-leak can also happen the other way i.e, the applier thread fails to unlock, there can be different consequences hereafter. 13. If the client thread continues without releasing the lock, then at a later stage, it can enter into a deadlock with the applier thread performing a GTID update with stack trace. Client_thread ------------- #1 __GI___lll_lock_wait #2 ___pthread_mutex_lock #3 native_mutex_lock <= waits for commit lock while holding sidno lock #4 Commit_stage_manager::enroll_for #5 MYSQL_BIN_LOG::change_stage percona#6 MYSQL_BIN_LOG::ordered_commit percona#7 MYSQL_BIN_LOG::commit percona#8 ha_commit_trans percona#9 trans_commit_implicit percona#10 mysql_create_like_table percona#11 Sql_cmd_create_table::execute percona#12 mysql_execute_command percona#13 dispatch_sql_command Applier thread -------------- #1 ___pthread_mutex_lock #2 native_mutex_lock #3 safe_mutex_lock #4 Gtid_state::update_gtids_impl_lock_sidnos <= waits for sidno lock #5 Gtid_state::update_commit_group percona#6 Commit_order_manager::flush_engine_and_signal_threads <= acquires commit lock here percona#7 Commit_order_manager::finish percona#8 Commit_order_manager::wait_and_finish percona#9 ha_commit_low percona#10 trx_coordinator::commit_in_engines percona#11 MYSQL_BIN_LOG::commit percona#12 ha_commit_trans percona#13 trans_commit percona#14 Xid_log_event::do_commit percona#15 Xid_apply_log_event::do_apply_event_worker percona#16 Slave_worker::slave_worker_exec_event percona#17 slave_worker_exec_job_group percona#18 handle_slave_worker 14. If the applier thread continues without releasing the lock, then at a later stage, it can perform recursive locking while setting the GTID for the next transaction (in set_gtid_next()). In debug builds the above case hits the assertion `safe_mutex_assert_not_owner()` meaning the lock is already acquired by the replica applier thread when it tries to re-acquire the lock. Solution -------- In the above problematic example, when seen from each thread individually, we can conclude that there is no problem in the order of lock acquisition, thus there is no need to change the lock order. However, the root cause for this problem is that multiple threads can concurrently access to the array `Gtid_state::commit_group_sidnos`. In its initial implementation, it was expected that threads should hold the `MYSQL_BIN_LOG::LOCK_commit` before modifying its contents. But it was not considered when upstream implemented WL#7846 (MTS: slave-preserve-commit-order when log-slave-updates/binlog is disabled). With this patch, we now ensure that `MYSQL_BIN_LOG::LOCK_commit` is acquired when the client thread (binlog flush leader) when it tries to perform GTID update on behalf of threads waiting in "Commit Order" queue, thus providing a guarantee that `Gtid_state::commit_group_sidnos` array is never accessed without the protection of `MYSQL_BIN_LOG::LOCK_commit`.

Upstream commit ID : fb-mysql-5.6.35/8cb1dc836b68f1f13e8b2655b2b8cb2d57f400b3 PS-5217 : Merge fb-prod201803 Summary: Original report: https://jira.mariadb.org/browse/MDEV-15816 To reproduce this bug just following below steps, client 1: USE test; CREATE TABLE t1 (i INT) ENGINE=MyISAM; HANDLER t1 OPEN h; CREATE TABLE t2 (i INT) ENGINE=RocksDB; LOCK TABLES t2 WRITE; client 2: FLUSH TABLES WITH READ LOCK; client 1: INSERT INTO t2 VALUES (1); So client 1 acquired the lock and set m_lock_rows = RDB_LOCK_WRITE. Then client 2 calls store_lock(TL_IGNORE) and m_lock_rows was wrongly set to RDB_LOCK_NONE, as below ``` #0 myrocks::ha_rocksdb::store_lock (this=0x7fffbc03c7c8, thd=0x7fffc0000ba0, to=0x7fffc0011220, lock_type=TL_IGNORE) #1 get_lock_data (thd=0x7fffc0000ba0, table_ptr=0x7fffe84b7d20, count=1, flags=2) #2 mysql_lock_abort_for_thread (thd=0x7fffc0000ba0, table=0x7fffbc03bbc0) #3 THD::notify_shared_lock (this=0x7fffc0000ba0, ctx_in_use=0x7fffbc000bd8, needs_thr_lock_abort=true) #4 MDL_lock::notify_conflicting_locks (this=0x555557a82380, ctx=0x7fffc0000cc8) #5 MDL_context::acquire_lock (this=0x7fffc0000cc8, mdl_request=0x7fffe84b8350, lock_wait_timeout=2) percona#6 Global_read_lock::lock_global_read_lock (this=0x7fffc0003fe0, thd=0x7fffc0000ba0) ``` Finally, client 1 "INSERT INTO..." hits the Assertion 'm_lock_rows == RDB_LOCK_WRITE' failed in myrocks::ha_rocksdb::write_row() Fix this bug by not setting m_locks_rows if lock_type == TL_IGNORE. Closes facebook/mysql-5.6#838 Pull Request resolved: facebook/mysql-5.6#871 Differential Revision: D9417382 Pulled By: lth fbshipit-source-id: c36c164e06c

…s=0 and a local DDL executed https://perconadev.atlassian.net/browse/PS-9018 Problem ------- In high concurrency scenarios, MySQL replica can enter into a deadlock due to a race condition between the replica applier thread and the client thread performing a binlog group commit. Analysis -------- It needs at least 3 threads for this deadlock to happen 1. One client thread 2. Two replica applier threads How this deadlock happens? -------------------------- 0. Binlog is enabled on replica, but log_replica_updates is disabled. 1. Initially, both "Commit Order" and "Binlog Flush" queues are empty. 2. Replica applier thread 1 enters the group commit pipeline to register in the "Commit Order" queue since `log-replica-updates` is disabled on the replica node. 3. Since both "Commit Order" and "Binlog Flush" queues are empty, the applier thread 1 3.1. Becomes leader (In Commit_stage_manager::enroll_for()). 3.2. Registers in the commit order queue. 3.3. Acquires the lock MYSQL_BIN_LOG::LOCK_log. 3.4. Commit Order queue is emptied, but the lock MYSQL_BIN_LOG::LOCK_log is not yet released. NOTE: SE commit for applier thread is already done by the time it reaches here. 4. Replica applier thread 2 enters the group commit pipeline to register in the "Commit Order" queue since `log-replica-updates` is disabled on the replica node. 5. Since the "Commit Order" queue is empty (emptied by applier thread 1 in 3.4), the applier thread 2 5.1. Becomes leader (In Commit_stage_manager::enroll_for()) 5.2. Registers in the commit order queue. 5.3. Tries to acquire the lock MYSQL_BIN_LOG::LOCK_log. Since it is held by applier thread 1 it will wait until the lock is released. 6. Client thread enters the group commit pipeline to register in the "Binlog Flush" queue. 7. Since "Commit Order" queue is not empty (there is applier thread 2 in the queue), it enters the conditional wait `m_stage_cond_leader` with an intention to become the leader for both the "Binlog Flush" and "Commit Order" queues. 8. Applier thread 1 releases the lock MYSQL_BIN_LOG::LOCK_log and proceeds to update the GTID by calling gtid_state->update_commit_group() from Commit_order_manager::flush_engine_and_signal_threads(). 9. Applier thread 2 acquires the lock MYSQL_BIN_LOG::LOCK_log. 9.1. It checks if there is any thread waiting in the "Binlog Flush" queue to become the leader. Here it finds the client thread waiting to be the leader. 9.2. It releases the lock MYSQL_BIN_LOG::LOCK_log and signals on the cond_var `m_stage_cond_leader` and enters a conditional wait until the thread's `tx_commit_pending` is set to false by the client thread (will be done in the Commit_stage_manager::process_final_stage_for_ordered_commit_group() called by client thread from fetch_and_process_flush_stage_queue()). 10. The client thread wakes up from the cond_var `m_stage_cond_leader`. The thread has now become a leader and it is its responsibility to update GTID of applier thread 2. 10.1. It acquires the lock MYSQL_BIN_LOG::LOCK_log. 10.2. Returns from `enroll_for()` and proceeds to process the "Commit Order" and "Binlog Flush" queues. 10.3. Fetches the "Commit Order" and "Binlog Flush" queues. 10.4. Performs the storage engine flush by calling ha_flush_logs() from fetch_and_process_flush_stage_queue(). 10.5. Proceeds to update the GTID of threads in "Commit Order" queue by calling gtid_state->update_commit_group() from Commit_stage_manager::process_final_stage_for_ordered_commit_group(). 11. At this point, we will have - Client thread performing GTID update on behalf if applier thread 2 (from step 10.5), and - Applier thread 1 performing GTID update for itself (from step 8). Due to the lack of proper synchronization between the above two threads, there exists a time window where both threads can call gtid_state->update_commit_group() concurrently. In subsequent steps, both threads simultaneously try to modify the contents of the array `commit_group_sidnos` which is used to track the lock status of sidnos. This concurrent access to `update_commit_group()` can cause a lock-leak resulting in one thread acquiring the sidno lock and not releasing at all. ----------------------------------------------------------------------------------------------------------- Client thread Applier Thread 1 ----------------------------------------------------------------------------------------------------------- update_commit_group() => global_sid_lock->rdlock(); update_commit_group() => global_sid_lock->rdlock(); calls update_gtids_impl_lock_sidnos() calls update_gtids_impl_lock_sidnos() set commit_group_sidno[2] = true set commit_group_sidno[2] = true lock_sidno(2) -> successful lock_sidno(2) -> waits update_gtids_impl_own_gtid() -> Add the thd->owned_gtid in `executed_gtids()` if (commit_group_sidnos[2]) { unlock_sidno(2); commit_group_sidnos[2] = false; } Applier thread continues.. lock_sidno(2) -> successful update_gtids_impl_own_gtid() -> Add the thd->owned_gtid in `executed_gtids()` if (commit_group_sidnos[2]) { <=== this check fails and lock is not released. unlock_sidno(2); commit_group_sidnos[2] = false; } Client thread continues without releasing the lock ----------------------------------------------------------------------------------------------------------- 12. As the above lock-leak can also happen the other way i.e, the applier thread fails to unlock, there can be different consequences hereafter. 13. If the client thread continues without releasing the lock, then at a later stage, it can enter into a deadlock with the applier thread performing a GTID update with stack trace. Client_thread ------------- #1 __GI___lll_lock_wait #2 ___pthread_mutex_lock #3 native_mutex_lock <= waits for commit lock while holding sidno lock #4 Commit_stage_manager::enroll_for #5 MYSQL_BIN_LOG::change_stage percona#6 MYSQL_BIN_LOG::ordered_commit percona#7 MYSQL_BIN_LOG::commit percona#8 ha_commit_trans percona#9 trans_commit_implicit percona#10 mysql_create_like_table percona#11 Sql_cmd_create_table::execute percona#12 mysql_execute_command percona#13 dispatch_sql_command Applier thread -------------- #1 ___pthread_mutex_lock #2 native_mutex_lock #3 safe_mutex_lock #4 Gtid_state::update_gtids_impl_lock_sidnos <= waits for sidno lock #5 Gtid_state::update_commit_group percona#6 Commit_order_manager::flush_engine_and_signal_threads <= acquires commit lock here percona#7 Commit_order_manager::finish percona#8 Commit_order_manager::wait_and_finish percona#9 ha_commit_low percona#10 trx_coordinator::commit_in_engines percona#11 MYSQL_BIN_LOG::commit percona#12 ha_commit_trans percona#13 trans_commit percona#14 Xid_log_event::do_commit percona#15 Xid_apply_log_event::do_apply_event_worker percona#16 Slave_worker::slave_worker_exec_event percona#17 slave_worker_exec_job_group percona#18 handle_slave_worker 14. If the applier thread continues without releasing the lock, then at a later stage, it can perform recursive locking while setting the GTID for the next transaction (in set_gtid_next()). In debug builds the above case hits the assertion `safe_mutex_assert_not_owner()` meaning the lock is already acquired by the replica applier thread when it tries to re-acquire the lock. Solution -------- In the above problematic example, when seen from each thread individually, we can conclude that there is no problem in the order of lock acquisition, thus there is no need to change the lock order. However, the root cause for this problem is that multiple threads can concurrently access to the array `Gtid_state::commit_group_sidnos`. In its initial implementation, it was expected that threads should hold the `MYSQL_BIN_LOG::LOCK_commit` before modifying its contents. But it was not considered when upstream implemented WL#7846 (MTS: slave-preserve-commit-order when log-slave-updates/binlog is disabled). With this patch, we now ensure that `MYSQL_BIN_LOG::LOCK_commit` is acquired when the client thread (binlog flush leader) when it tries to perform GTID update on behalf of threads waiting in "Commit Order" queue, thus providing a guarantee that `Gtid_state::commit_group_sidnos` array is never accessed without the protection of `MYSQL_BIN_LOG::LOCK_commit`.

PS-5741: Incorrect use of memset_s in keyring_vault. Fixed the usage of memset_s. The arguments should be: void memset_s(void *dest, size_t dest_max, int c, size_t n) where the 2nd argument is size of buffer and the 3rd is argument is character to fill. --------------------------------------------------------------------------- PS-7769 - Fix use-after-return error in audit_log_exclude_accounts_validate --- *Problem:* `st_mysql_value::val_str` might return a pointer to `buf` which after the function called is deleted. Therefore the value in `save`, after reuturnin from the function, is invalid. In this particular case, the error is not manifesting as val_str` returns memory allocated with `thd_strmake` and it does not use `buf`. *Solution:* Allocate memory with `thd_strmake` so the memory in `save` is not local. --------------------------------------------------------------------------- Fix test main.bug12969156 when WITH_ASAN=ON *Problem:* ASAN complains about stack-buffer-overflow on function `mysql_heartbeat`: ``` ==90890==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7fe746d06d14 at pc 0x7fe760f5b017 bp 0x7fe746d06cd0 sp 0x7fe746d06478 WRITE of size 24 at 0x7fe746d06d14 thread T16777215 Address 0x7fe746d06d14 is located in stack of thread T26 at offset 340 in frame #0 0x7fe746d0a55c in mysql_heartbeat(void*) /home/yura/ws/percona-server/plugin/daemon_example/daemon_example.cc:62 This frame has 4 object(s): [48, 56) 'result' (line 66) [80, 112) '_db_stack_frame_' (line 63) [144, 200) 'tm_tmp' (line 67) [240, 340) 'buffer' (line 65) <== Memory access at offset 340 overflows this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork (longjmp and C++ exceptions *are* supported) Thread T26 created by T25 here: #0 0x7fe760f5f6d5 in __interceptor_pthread_create ../../../../src/libsanitizer/asan/asan_interceptors.cpp:216 #1 0x557ccbbcb857 in my_thread_create /home/yura/ws/percona-server/mysys/my_thread.c:104 #2 0x7fe746d0b21a in daemon_example_plugin_init /home/yura/ws/percona-server/plugin/daemon_example/daemon_example.cc:148 #3 0x557ccb4c69c7 in plugin_initialize /home/yura/ws/percona-server/sql/sql_plugin.cc:1279 #4 0x557ccb4d19cd in mysql_install_plugin /home/yura/ws/percona-server/sql/sql_plugin.cc:2279 #5 0x557ccb4d218f in Sql_cmd_install_plugin::execute(THD*) /home/yura/ws/percona-server/sql/sql_plugin.cc:4664 percona#6 0x557ccb47695e in mysql_execute_command(THD*, bool) /home/yura/ws/percona-server/sql/sql_parse.cc:5160 percona#7 0x557ccb47977c in mysql_parse(THD*, Parser_state*, bool) /home/yura/ws/percona-server/sql/sql_parse.cc:5952 percona#8 0x557ccb47b6c2 in dispatch_command(THD*, COM_DATA const*, enum_server_command) /home/yura/ws/percona-server/sql/sql_parse.cc:1544 percona#9 0x557ccb47de1d in do_command(THD*) /home/yura/ws/percona-server/sql/sql_parse.cc:1065 percona#10 0x557ccb6ac294 in handle_connection /home/yura/ws/percona-server/sql/conn_handler/connection_handler_per_thread.cc:325 percona#11 0x557ccbbfabb0 in pfs_spawn_thread /home/yura/ws/percona-server/storage/perfschema/pfs.cc:2198 percona#12 0x7fe760ab544f in start_thread nptl/pthread_create.c:473 ``` The reason is that `my_thread_cancel` is used to finish the daemon thread. This is not and orderly way of finishing the thread. ASAN does not register the stack variables are not used anymore which generates the error above. This is a benign error as all the variables are on the stack. *Solution*: Finish the thread in orderly way by using a signalling variable. --------------------------------------------------------------------------- PS-8204: Fix XML escape rules for audit plugin https://jira.percona.com/browse/PS-8204 There was a wrong length specified for some XML escape rules. As a result of this terminating null symbol from replacement rule was copied into resulting string. This lead to quer text truncation in audit log file. In addition added empty replacement rules for '\b' and 'f' symbols which just remove them from resulting string. These symboles are not supported in XML 1.0. --------------------------------------------------------------------------- PS-8854: Add main.percona_udf MTR test Add a test to check FNV1A_64, FNV_64, and MURMUR_HASH user-defined functions. --------------------------------------------------------------------------- PS-9218: Merge MySQL 8.4.0 (fix gcc-14 build) https://perconadev.atlassian.net/browse/PS-9218

…n read() syscall over network https://jira.percona.com/browse/PS-8592 Description ----------- GR suffered from problems caused by the security probes and network scanner processes connecting to the group replication communication port. This usually is not a problem, but poses a serious threat when another member tries to join the cluster by initialting a connection to the member which is affected by external processes using the port dedicated for group communication for longer durations. On such activites by external processes, the SSL enabled server stalled forever on the SSL_accept() call waiting for handshake data. Below is the stacktrace: Thread 55 (Thread 0x7f7bb77ff700 (LWP 2198598)): #0 in read () #1 in sock_read () #2 in BIO_read () #3 in ssl23_read_bytes () #4 in ssl23_get_client_hello () #5 in ssl23_accept () percona#6 in xcom_tcp_server_startup(Xcom_network_provider*) () When the server stalled in the above path forever, it prohibited other members to join the cluster resulting in the following messages on the joiner server's logs. [ERROR] [MY-011640] [Repl] Plugin group_replication reported: 'Timeout on wait for view after joining group' [ERROR] [MY-011735] [Repl] Plugin group_replication reported: '[GCS] The member is already leaving or joining a group.' Solution -------- This patch adds two new variables 1. group_replication_xcom_ssl_socket_timeout It is a file-descriptor level timeout in seconds for both accept() and SSL_accept() calls when group replication is listening on the xcom port. When set to a valid value, say for example 5 seconds, both accept() and SSL_accept() return after 5 seconds. The default value has been set to 0 (waits infinitely) for backward compatibility. This variable is effective only when GR is configred with SSL. 2. group_replication_xcom_ssl_accept_retries It defines the number of retries to be performed before closing the socket. For each retry the server thread calls SSL_accept() with timeout defined by the group_replication_xcom_ssl_socket_timeout for the SSL handshake process once the connection has been accepted by the first accept() call. The default value has been set to 10. This variable is effective only when GR is configred with SSL. Note: - Both of the above variables are dynamically configurable, but will become effective only on START GROUP_REPLICATION. ------------------------------------------------------------------------- PS-8844: Fix the failing main.mysqldump_gtid_purged https://jira.percona.com/browse/PS-8844 This patch fixes the test failure of main.mysqldump_gtid_purged that failed due to the uninitialized variable $redirect_stderr in the start_proc_in_background.inc. ---------------------------------------------------------------------- PS-9218: Merge MySQL 8.4.0 (fix terminology in replication tests) https://perconadev.atlassian.net/browse/PS-9218 mysql/mysql-server@44a77b5

lukin-oleksiy and others added 3 commits October 2, 2024 14:43

Adding CONTRIBUTING file (3rd draft)

62bfba8

Used Gemini for Parahrasing

59f7204

Accidentally included README.md in the PR

db5b8ed

hulyav marked this pull request as draft October 4, 2024 20:50

hulyav closed this Oct 4, 2024

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Ps 9255 contributing guide #4

Ps 9255 contributing guide #4

hulyav commented Oct 3, 2024

Ps 9255 contributing guide #4

Ps 9255 contributing guide #4

Conversation

hulyav commented Oct 3, 2024