ASoC: SOF: Intel: hda: switch to use legacy IRQ mode #7

keyonjie · 2019-05-30T02:42:30Z

There is IPC IRQ missing issues during our stress test with MSI mode,
let's switch back to use legacy IRQ mode before we can verify that MSI
is reliable.

Signed-off-by: Keyon Jie yang.jie@linux.intel.com

There is IPC IRQ missing issues during our stress test with MSI mode, let's switch back to use legacy IRQ mode before we can verify that MSI is reliable. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>

… allocation After memory allocation failure vc_allocate() doesn't clean up data which has been initialized in visual_init(). In case of fbcon this leads to divide-by-0 in fbcon_init() on next open of the same tty. memory allocation in vc_allocate() may fail here: 1097: vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL); on next open() fbcon_init() skips vc_font.data initialization: 1088: if (!p->fontdata) { division by zero in fbcon_init() happens here: 1149: new_cols /= vc->vc_font.width; Additional check is needed in fbcon_deinit() to prevent usage of uninitialized vc_screenbuf: 1251: if (vc->vc_hi_font_mask && vc->vc_screenbuf) 1252: set_vc_hi_font(vc, false); Crash: #6 [ffffc90001eafa60] divide_error at ffffffff81a00be4 [exception RIP: fbcon_init+463] RIP: ffffffff814b860f RSP: ffffc90001eafb18 RFLAGS: 00010246 ... #7 [ffffc90001eafb60] visual_init at ffffffff8154c36e thesofproject#8 [ffffc90001eafb80] vc_allocate at ffffffff8154f53c thesofproject#9 [ffffc90001eafbc8] con_install at ffffffff8154f624 ... Signed-off-by: Grzegorz Halat <ghalat@redhat.com> Reviewed-by: Oleksandr Natalenko <oleksandr@redhat.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Ido Schimmel says: ==================== mlxsw: Various fixes This patchset contains various fixes for mlxsw. Patch #1 fixes an hash polarization problem when a nexthop device is a LAG device. This is caused by the fact that the same seed is used for the LAG and ECMP hash functions. Patch #2 fixes an issue in which the driver fails to refresh a nexthop neighbour after it becomes dead. This prevents the nexthop from ever being written to the adjacency table and used to forward traffic. Patch Patch #4 fixes a wrong extraction of TOS value in flower offload code. Patch #5 is a test case. Patch #6 works around a buffer issue in Spectrum-2 by reducing the default sizes of the shared buffer pools. Patch #7 prevents prio-tagged packets from entering the switch when PVID is removed from the bridge port. Please consider patches #2, #4 and #6 for 5.1.y ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

journal_head::b_transaction and journal_head::b_next_transaction could be accessed concurrently as noticed by KCSAN, LTP: starting fsync04 /dev/zero: Can't open blockdev EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) ================================================================== BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2] write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70: __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2] __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569 jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2] (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034 kjournald2+0x13b/0x450 [jbd2] kthread+0x1cd/0x1f0 ret_from_fork+0x27/0x50 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68: jbd2_write_access_granted+0x1b2/0x250 [jbd2] jbd2_write_access_granted at fs/jbd2/transaction.c:1155 jbd2_journal_get_write_access+0x2c/0x60 [jbd2] __ext4_journal_get_write_access+0x50/0x90 [ext4] ext4_mb_mark_diskspace_used+0x158/0x620 [ext4] ext4_mb_new_blocks+0x54f/0xca0 [ext4] ext4_ind_map_blocks+0xc79/0x1b40 [ext4] ext4_map_blocks+0x3b4/0x950 [ext4] _ext4_get_block+0xfc/0x270 [ext4] ext4_get_block+0x3b/0x50 [ext4] __block_write_begin_int+0x22e/0xae0 __block_write_begin+0x39/0x50 ext4_write_begin+0x388/0xb50 [ext4] generic_perform_write+0x15d/0x290 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe 5 locks held by fsync04/25724: #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260 #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4] #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2] #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4] #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2] irq event stamp: 1407125 hardirqs last enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790 softirqs last enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 The plain reads are outside of jh->b_state_lock critical section which result in data races. Fix them by adding pairs of READ|WRITE_ONCE(). Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pw Signed-off-by: Theodore Ts'o <tytso@mit.edu>

This BUG halt was reported a while back, but the patch somehow got missed: PID: 2879 TASK: c16adaa0 CPU: 1 COMMAND: "sctpn" #0 [f418dd28] crash_kexec at c04a7d8c #1 [f418dd7c] oops_end at c0863e02 #2 [f418dd90] do_invalid_op at c040aaca #3 [f418de28] error_code (via invalid_op) at c08631a5 EAX: f34baac0 EBX: 00000090 ECX: f418deb0 EDX: f5542950 EBP: 00000000 DS: 007b ESI: f34ba800 ES: 007b EDI: f418dea0 GS: 00e0 CS: 0060 EIP: c046fa5e ERR: ffffffff EFLAGS: 00010286 #4 [f418de5c] add_timer at c046fa5e #5 [f418de68] sctp_do_sm at f8db8c77 [sctp] #6 [f418df30] sctp_primitive_SHUTDOWN at f8dcc1b5 [sctp] #7 [f418df48] inet_shutdown at c080baf9 thesofproject#8 [f418df5c] sys_shutdown at c079eedf thesofproject#9 [f418df7] sys_socketcall at c079fe88 EAX: ffffffda EBX: 0000000d ECX: bfceea90 EDX: 0937af98 DS: 007b ESI: 0000000c ES: 007b EDI: b7150ae4 SS: 007b ESP: bfceea7c EBP: bfceeaa8 GS: 0033 CS: 0073 EIP: b775c424 ERR: 00000066 EFLAGS: 00000282 It appears that the side effect that starts the shutdown timer was processed multiple times, which can happen as multiple paths can trigger it. This of course leads to the BUG halt in add_timer getting called. Fix seems pretty straightforward, just check before the timer is added if its already been started. If it has mod the timer instead to min(current expiration, new expiration) Its been tested but not confirmed to fix the problem, as the issue has only occured in production environments where test kernels are enjoined from being installed. It appears to be a sane fix to me though. Also, recentely, Jere found a reproducer posted on list to confirm that this resolves the issues Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: jere.leppanen@nokia.com CC: marcelo.leitner@gmail.com CC: netdev@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

We had kernel panic, it is caused by unload module and last close confirmation. call trace: [1196029.743127] free_sess+0x15/0x50 [rtrs_client] [1196029.743128] rtrs_clt_close+0x4c/0x70 [rtrs_client] [1196029.743129] ? rnbd_clt_unmap_device+0x1b0/0x1b0 [rnbd_client] [1196029.743130] close_rtrs+0x25/0x50 [rnbd_client] [1196029.743131] rnbd_client_exit+0x93/0xb99 [rnbd_client] [1196029.743132] __x64_sys_delete_module+0x190/0x260 And in the crashdump confirmation kworker is also running. PID: 6943 TASK: ffff9e2ac8098000 CPU: 4 COMMAND: "kworker/4:2" #0 [ffffb206cf337c30] __schedule at ffffffff9f93f891 #1 [ffffb206cf337cc8] schedule at ffffffff9f93fe98 #2 [ffffb206cf337cd0] schedule_timeout at ffffffff9f943938 #3 [ffffb206cf337d50] wait_for_completion at ffffffff9f9410a7 #4 [ffffb206cf337da0] __flush_work at ffffffff9f08ce0e #5 [ffffb206cf337e20] rtrs_clt_close_conns at ffffffffc0d5f668 [rtrs_client] #6 [ffffb206cf337e48] rtrs_clt_close at ffffffffc0d5f801 [rtrs_client] #7 [ffffb206cf337e68] close_rtrs at ffffffffc0d26255 [rnbd_client] thesofproject#8 [ffffb206cf337e78] free_sess at ffffffffc0d262ad [rnbd_client] thesofproject#9 [ffffb206cf337e88] rnbd_clt_put_dev at ffffffffc0d266a7 [rnbd_client] The problem is both code path try to close same session, which lead to panic. To fix it, just skip the sess if the refcount already drop to 0. Fixes: f7a7a5c ("block/rnbd: client: main functionality") Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

ASoC: SOF: Intel: hda: switch to use legacy IRQ mode

08be9af

There is IPC IRQ missing issues during our stress test with MSI mode, let's switch back to use legacy IRQ mode before we can verify that MSI is reliable. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

ASoC: SOF: Intel: hda: switch to use legacy IRQ mode #7

ASoC: SOF: Intel: hda: switch to use legacy IRQ mode #7

keyonjie commented May 30, 2019

ASoC: SOF: Intel: hda: switch to use legacy IRQ mode #7

Are you sure you want to change the base?

ASoC: SOF: Intel: hda: switch to use legacy IRQ mode #7

Conversation

keyonjie commented May 30, 2019