locale(zh): Update Chinese (zh) localization (#1588)

src/locales/zh.json

@@ -1,6 +1,10 @@
 {
     "App": {
         "Notifications": {
+            "BrowserWarnings": {
+                "Description": "{name} 已过时且没有完整支持。当前版本是{version}，但是Mainsail需要{minVersion}或更高版本。",
+                "Headline": "过时的浏览器"
+            },
             "DependencyDescription": "当前版本的{name}并不支持Mainsail的全部功能。{name}需要至少更新到{neededVersion}版本。",
             "DependencyName": "依赖：{name}",
             "DismissAll": "全部忽略",
@@ -29,7 +33,7 @@
             "MustBeBetweenError": "必须在{min}和{max}之间！",
             "NoEmptyAllowedError": "输入值不能为空！"
         },
-        "Printers": "打印机集群",
+        "Printers": "打印机群组",
         "TheServiceWorker": {
             "DescriptionNeedUpdate": "本地缓存已过时，需要进行更新。请点击下面的按钮来更新缓存。",
             "TitleNeedUpdate": "PWA需要更新",
@@ -144,6 +148,7 @@
         "StartPrint": {
             "Cancel": "取消",
             "DoYouWantToStartFilename": "是否开始打印{filename}？",
+            "DoYouWantToStartFilenameFilament": "是否用以下耗材开始打印{filename}？",
             "Headline": "开始任务",
             "Print": "打印",
             "Timelapse": "延时摄影"
@@ -193,7 +198,7 @@
         "ExtruderTemp": "挤出机温度",
         "Filament": "耗材",
         "FilamentName": "耗材名称",
-        "FilamentType": "耗材规格",
+        "FilamentType": "耗材类型",
         "FilamentUsage": "耗材用量",
         "FilamentWeight": "耗材重量",
         "Files": "每页显示文件数",
@@ -219,7 +224,7 @@
         "Preheat": "预热",
         "PrintedFiles": "已打印文件",
         "PrintStart": "开始打印",
-        "PrintTime": "打印时间",
+        "PrintTime": "打印时长",
         "RefreshCurrentDirectory": "刷新当前路径",
         "Rename": "重命名",
         "RenameDirectory": "重命名文件夹",
@@ -316,7 +321,7 @@
     "History": {
         "AddNote": "添加便条",
         "AllJobs": "全部",
-        "AvgPrinttime": "平均打印时间",
+        "AvgPrinttime": "平均打印时长",
         "Cancel": "取消",
         "Chart": "图表",
         "CreateNote": "新建便条",
@@ -329,58 +334,58 @@
         "EndTime": "结束时间",
         "EstimatedFilament": "预估耗材用量",
         "EstimatedFilamentWeight": "预估耗材重量",
-        "EstimatedTime": "预估时长",
+        "EstimatedTime": "预估打印时长",
         "FilamentCalc": "耗材预估长度",
         "FilamentUsage": "耗材用量",
-        "FilamentUsed": "耗材使用长度",
+        "FilamentUsed": "实际耗材用量",
         "Filename": "文件名",
         "Filesize": "文件大小",
         "FirstLayerBedTemp": "首层热床温度",
-        "FirstLayerExtTemp": "首层仓内温度",
+        "FirstLayerExtTemp": "首层挤出温度",
         "FirstLayerHeight": "首层高度",
         "HistoryFilamentUsage": "耗材用量",
-        "HistoryPrinttimeAVG": "打印时间",
+        "HistoryPrinttimeAVG": "打印时长",
         "JobDetails": "任务详情",
         "Jobs": "每页显示任务数",
-        "LastModified": "上次修改",
+        "LastModified": "修改日期",
         "LayerHeight": "层高",
-        "LongestPrinttime": "最长打印时间",
+        "LongestPrinttime": "最长打印时长",
         "Note": "便条",
         "ObjectHeight": "物体高度",
         "PrintDuration": "打印耗时",
         "PrintHistory": "打印历史",
-        "PrintTime": "打印时长",
-        "PrinttimeAvg": "平均打印时间",
+        "PrintTime": "实际打印时长",
+        "PrinttimeAvg": "平均打印时长",
         "Reprint": "重新打印",
         "Save": "保存",
         "Search": "搜索",
         "SelectedFilamentUsed": "已选中的任务耗材使用量",
         "SelectedJobs": "已选中的任务",
-        "SelectedPrinttime": "已选中的任务打印时间",
+        "SelectedPrinttime": "已选中的任务打印时长",
         "Slicer": "切片软件",
         "SlicerVersion": "切片软件版本",
         "StartTime": "开始时间",
         "Statistics": "统计",
-        "Status": "状态",
+        "Status": "任务状态",
         "StatusValues": {
-            "cancelled": "取消",
-            "completed": "完成",
-            "error": "错误",
+            "cancelled": "取消打印",
+            "completed": "完成打印",
+            "error": "故障",
             "in_progress": "打印中",
             "klippy_disconnect": "Klippy失去连接",
-            "klippy_shutdown": "Klippy已关闭",
+            "klippy_shutdown": "Klippy关闭",
             "Others": "其他",
-            "server_exit": "服务器退出"
+            "server_exit": "服务终止"
         },
         "Table": "表格",
         "TitleExportHistory": "导出历史记录",
         "TitleRefreshHistory": "刷新历史记录",
         "TitleSettings": "设置",
-        "TotalDuration": "总时间",
+        "TotalDuration": "总消耗时长",
         "TotalFilamentUsed": "耗材使用总量",
         "TotalJobs": "任务次数",
-        "TotalPrinttime": "总打印时间",
-        "TotalTime": "总消耗时间"
+        "TotalPrinttime": "总打印时长",
+        "TotalTime": "总消耗时长"
     },
     "JobQueue": {
         "AllJobs": "全部任务",
@@ -422,7 +427,7 @@
             "FreeDisk": "剩余磁盘空间",
             "HiddenFiles": "显示隐藏文件",
             "HideBackupFiles": "隐藏备份文件",
-            "LastModified": "上次修改",
+            "LastModified": "修改日期",
             "Name": "名称",
             "RefreshDirectory": "刷新文件夹",
             "Rename": "重命名",
@@ -491,7 +496,7 @@
             "CommittedOnDate": "提交于{date}",
             "CommittedYesterday": "昨天提交",
             "ConfigChanges": "查看变更日志",
-            "Corrupt": "破坏",
+            "Corrupt": "异常",
             "CountPackagesCanBeUpgraded": "有{count}个软件包可以更新",
             "Detached": "独立分支",
             "Dirty": "被修改",
@@ -540,8 +545,8 @@
             "FirmwareRetractionSettings": {
                 "RetractLength": "回抽长度",
                 "RetractSpeed": "回抽速度",
-                "UnretractExtraLength": "回料长度",
-                "UnretractSpeed": "回料速度"
+                "UnretractExtraLength": "装填长度",
+                "UnretractSpeed": "装填速度"
             },
             "Headline": "挤出机",
             "LoadFilament": "装载耗材",
@@ -561,7 +566,7 @@
             "WebcamOff": "关闭"
         },
         "KlippyStatePanel": {
-            "CheckKlippyAndUdsAddress": "请检查Klipper服务是否启动并且moonraker.conf已经添加了klippy_uds_address配置。",
+            "CheckKlippyAndUdsAddress": "请检查Klipper服务是否启动。",
             "FirmwareRestart": "重启Klipper固件",
             "MoonrakerCannotConnect": "Moonraker无法连接到Klipper ！",
             "PowerOn": "开启电源",
@@ -584,6 +589,7 @@
             "Send": "发送"
         },
         "MiniconsolePanel": {
+            "Autoscroll": "自动滚动",
             "Headline": "控制台",
             "HideTemperatures": "隐藏温度变化消息",
             "HideTimelapse": "隐藏延时摄影消息",
@@ -616,6 +622,32 @@
             "On": "打开",
             "PowerControl": "电源控制"
         },
+        "SpoolmanPanel": {
+            "Cancel": "取消",
+            "ChangeSpool": "更换料盘",
+            "DaysAgo": "{days}天前",
+            "EjectSpool": "弹出料盘",
+            "EjectSpoolQuestion": "你确定要弹出耗材料盘吗？",
+            "Filament": "耗材",
+            "FilamentTypeMismatch": "已激活料盘的材料({spoolType})与G-Code的材料({fileType})不匹配。",
+            "Headline": "Spoolman",
+            "LastUsed": "最后使用",
+            "Location": "位置",
+            "Material": "材料",
+            "Never": "从未",
+            "NoActiveSpool": "耗材跟踪未激活。要开始，请选择一个料盘。",
+            "NoResults": "未找到符合当前搜索条件的料盘。",
+            "NoSpools": "没有可用料盘",
+            "NoSpoolSelected": "没有选择料盘。请选择一个料盘，否则将无法跟踪此打印。",
+            "OpenSpoolManager": "打开料盘管理器",
+            "Refresh": "刷新",
+            "Search": "搜索",
+            "SelectSpool": "选择料盘",
+            "Today": "今天",
+            "TooLessFilament": "当前料盘可能没有足够的耗材用于此次打印。(剩余{spoolWeight}克/需要{fileWeight}克)",
+            "Weight": "重量",
+            "Yesterday": "昨天"
+        },
         "StatusPanel": {
             "CancelPrint": "取消打印",
             "ClearPrintStats": "清除打印统计数据",
@@ -678,6 +710,7 @@
             },
             "Headline": "温度",
             "HideMcuHostSensors": "隐藏Host/MCU传感器",
+            "HideMonitors": "隐藏监视器",
             "Max": "最高",
             "Min": "最低",
             "Name": "名称",
@@ -720,9 +753,7 @@
             "SaveConfig": "保存配置",
             "SaveInfoDescription": "已经计算生成新的Z轴偏移。点击\"保存配置\"后会自动保存到printer.cfg中并重启Klipper。",
             "SaveInfoDescriptionPrint": "已经计算生成新的Z轴偏移。打印完成后点击\"保存配置\"后会自动保存到printer.cfg中并重启Klipper。",
-            "SaveInfoHeadline": "信息",
-            "ToEndstop": "距离限位",
-            "ToProbe": "距离Probe传感器"
+            "SaveInfoHeadline": "信息"
         }
     },
     "PowerDeviceChangeDialog": {
@@ -875,6 +906,8 @@
             "CannotReadJson": "无法读取/解析备份文件。",
             "DateFormat": "日期格式",
             "DbConsoleHistory": "控制台历史记录",
+            "DbHistoryJobs": "历史任务",
+            "DbHistoryTotals": "历史总计",
             "DBNavigation": "侧边栏",
             "DbTimelapseSettings": "延时摄影设置",
             "DbView": "视图设置",
@@ -956,7 +989,7 @@
             "UnableToLoadPreset": "无法加载预设"
         },
         "NavigationTab": {
-            "Navigation": "导航"
+            "Navigation": "侧边栏"
         },
         "PresetsTab": {
             "AddPreset": "添加预设",
@@ -1042,10 +1075,10 @@
             "Timelapse": "延时摄影",
             "TravelSpeed": "移动速度",
             "TravelSpeedDescription": "打印头移动到停靠位置和恢复到打印位置时的运动速度",
-            "UnretractDistance": "回料长度",
-            "UnretractDistanceDescription": "挤出机回抽后重新回料的长度",
-            "UnretractSpeed": "回料速度",
-            "UnretractSpeedDescription": "挤出机回抽后重新回料的速度",
+            "UnretractDistance": "装填长度",
+            "UnretractDistanceDescription": "挤出机回抽后重新装填的长度",
+            "UnretractSpeed": "装填速度",
+            "UnretractSpeedDescription": "挤出机回抽后重新装填的速度",
             "VariableFps": "可变FPS",
             "VariableFpsDescription": "如果开启，输出视频的帧率会根据目标时长来计算",
             "VariableFpsMax": "可变FPS最大值",
@@ -1055,7 +1088,8 @@
         },
         "UiSettingsTab": {
             "BedScrewsDialog": "底板螺丝对话框",
-            "BedScrewsDialogDescription": "显示 BED_SCREWS_ADJUST 的辅助程序对话框。",
+            "BedScrewsDialogDescription": "显示BED_SCREWS_ADJUST辅助对话框。",
+            "BigThumbnailBackground": "大缩略图背景颜色",
             "BoolBigThumbnail": "大缩略图",
             "BoolBigThumbnailDescription": "打印时在状态框中显示大缩略图",
             "BoolHideUploadAndPrintButton": "隐藏\"上传并打印\"按钮",
@@ -1086,18 +1120,18 @@
             "LockSlidersDescription": "在允许更改之前需要解锁触摸屏上的滑动条",
             "Logo": "Logo颜色",
             "ManualProbeDialog": "手动Probe助手对话框",
-            "ManualProbeDialogDescription": "显示 PROBE_CALIBRATE 或 Z_ENDSTOP_CALIBRATE 的辅助程序对话框。",
-            "NavigationStyle": "导航栏样式",
-            "NavigationStyleDescription": "更改导航栏外观",
+            "ManualProbeDialogDescription": "显示PROBE_CALIBRATE或Z_ENDSTOP_CALIBRATE辅助对话框。",
+            "NavigationStyle": "侧边栏样式",
+            "NavigationStyleDescription": "更改侧边栏外观",
             "NavigationStyleIconsAndText": "图标+文字",
             "NavigationStyleIconsOnly": "仅图标",
             "PowerDeviceName": "打印机电源设备",
             "PowerDeviceNameDescription": "请选择可以控制打印机供电的Moonraker电源设备。",
             "Primary": "高亮颜色",
             "ScrewsTiltAdjustDialog": "螺丝倾斜调整对话框",
-            "ScrewsTiltAdjustDialogDescription": "显示 SCREWS_TILT_CALCULATE 的辅助程序对话框。",
+            "ScrewsTiltAdjustDialogDescription": "显示SCREWS_TILT_CALCULATE辅助对话框。",
             "TempchartHeight": "温度图表高度",
-            "TempchartHeightDescription": "修改Dashboard上温度图表的高度。",
+            "TempchartHeightDescription": "修改控制面板上温度图表的高度。",
             "UiSettings": "UI设置"
         },
         "Update": "更新",
@@ -1121,7 +1155,7 @@
             "Ipstream": "IP摄像头",
             "JMuxerStream": "原始h264视频流 (jmuxer)",
             "Mjpegstreamer": "MJPEG-Streamer",
-            "MjpegstreamerAdaptive": "Adaptive MJPEG-Streamer (试验性)",
+            "MjpegstreamerAdaptive": "自适应MJPEG-Streamer(试验性)",
             "Name": "名称",
             "NameAlreadyExists": "名称已经存在",
             "Required": "需要填写名称",
@@ -1130,8 +1164,8 @@
             "Service": "服务",
             "TargetFPS": "目标FPS",
             "UpdateWebcam": "更新摄像头",
-            "UrlSnapshot": "快照地址(URL)",
-            "UrlStream": "视频流地址(URL)",
+            "UrlSnapshot": "快照URL",
+            "UrlStream": "视频流URL",
             "Uv4lMjpeg": "UV4L-MJPEG",
             "Vertically": "垂直",
             "Webcams": "摄像头",