put negate into another file so it cannot be inlined #177
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
name: JerryScript CI | |
on: [push, pull_request] | |
env: | |
RUNNER: tools/run-tests.py | |
jobs: | |
# Checks: | |
# runs-on: ubuntu-22.04 # needed for checker version stability | |
# steps: | |
# - uses: actions/checkout@v2 | |
# with: | |
# fetch-depth: 0 | |
# - uses: actions/setup-python@v2 | |
# with: | |
# python-version: '3.10' | |
# - run: sudo apt update | |
# - run: sudo apt install pylint doxygen cppcheck clang-format-15 | |
# - run: $RUNNER --check-signed-off=gh-actions | |
# if: ${{ always() }} | |
# - run: $RUNNER --check-doxygen | |
# if: ${{ always() }} | |
# - run: $RUNNER --check-format | |
# if: ${{ always() }} | |
# - run: $RUNNER --check-license | |
# if: ${{ always() }} | |
# - run: $RUNNER --check-strings | |
# if: ${{ always() }} | |
# - run: $RUNNER --check-pylint | |
# if: ${{ always() }} | |
# - run: $RUNNER --check-cppcheck | |
# if: ${{ always() }} | |
# | |
# Linux_x86-64_Build_Correctness_Debugger_Tests: | |
# runs-on: ubuntu-latest | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: $RUNNER -q --jerry-tests | |
# - run: $RUNNER -q --jerry-tests --build-debug | |
# - run: $RUNNER -q --jerry-debugger | |
# - run: $RUNNER -q --jerry-debugger --build-debug | |
# | |
# Linux_x86_cpointer-32bit_Build_Correctness_Tests: | |
# runs-on: ubuntu-latest | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: sudo apt update | |
# - run: sudo apt install gcc-multilib | |
# - run: $RUNNER -q --jerry-tests --buildoptions=--compile-flag=-m32,--cpointer-32bit=on | |
# - run: $RUNNER -q --jerry-tests --buildoptions=--compile-flag=-m32,--cpointer-32bit=on --build-debug | |
OSX_x86-64_Build_Correctness_Unit_Tests: | |
runs-on: macos-latest | |
steps: | |
- uses: actions/checkout@v2 | |
- uses: actions/setup-python@v4 | |
with: | |
python-version: '>=3.6' | |
- run: $RUNNER -q --jerry-tests | |
# - run: $RUNNER -q --unittests | |
# OSX_x86-64_Build_Correctness_Unit_Tests_Debug: | |
# runs-on: macos-latest | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: $RUNNER -q --jerry-tests --build-debug | |
# - run: $RUNNER -q --unittests --build-debug | |
# | |
# Linux_x86-64_Build_Option_Tests: | |
# runs-on: ubuntu-latest | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: sudo apt update | |
# - run: sudo apt install gcc-multilib | |
# - run: $RUNNER --buildoption-test | |
# | |
# Conformance_Tests_ESNext: | |
# runs-on: ubuntu-latest | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: $RUNNER --test262 update | |
# - uses: actions/upload-artifact@v2 | |
# if: success() || failure() | |
# with: | |
# name: Test262-ESNext-results | |
# path: | | |
# build/tests/test262_tests_esnext/local/bin/test262.report | |
# | |
# Conformance_Tests_ESNext_Debug_A: | |
# runs-on: ubuntu-latest | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: $RUNNER --test262 update --build-debug --test262-test-list=built-ins,annexB,harness,intl402 | |
# - uses: actions/upload-artifact@v2 | |
# if: success() || failure() | |
# with: | |
# name: Test262-ESNext-Debug-A-results | |
# path: | | |
# build/tests/test262_tests_esnext-debug/local/bin/test262.report | |
# | |
# Conformance_Tests_ESNext_Debug_B: | |
# runs-on: ubuntu-latest | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: $RUNNER --test262 update --build-debug --test262-test-list=language | |
# - uses: actions/upload-artifact@v2 | |
# if: success() || failure() | |
# with: | |
# name: Test262-ESNext-Debug-B-results | |
# path: | | |
# build/tests/test262_tests_esnext-debug/local/bin/test262.report | |
# | |
# Unit_Tests: | |
# runs-on: ubuntu-latest | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: $RUNNER -q --unittests | |
# - run: $RUNNER -q --unittests --build-debug | |
# | |
# Clang_Unit_Build_Option_Tests: | |
# runs-on: ubuntu-latest | |
# env: | |
# CC: clang | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: sudo apt update | |
# - run: sudo apt install gcc-multilib | |
# - run: $RUNNER -q --unittests | |
# # clang has bug in supporting lto | |
# - run: $RUNNER -q --buildoption-test --buildoptions=--lto=off | |
# | |
# ASAN_Tests: | |
# runs-on: ubuntu-latest | |
# env: | |
# ASAN_OPTIONS: detect_stack_use_after_return=1:check_initialization_order=true:strict_init_order=true | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: sudo apt update | |
# - run: sudo apt install gcc-multilib | |
# - run: >- | |
# $RUNNER -q --jerry-tests | |
# --buildoptions=--stack-limit=0,--compile-flag=-fsanitize=address,--compile-flag=-m32,--compile-flag=-fno-omit-frame-pointer,--compile-flag=-fno-common,--compile-flag=-O2,--debug,--system-allocator=on,--linker-flag=-fuse-ld=gold | |
# --skip-list=parser-oom.js,parser-oom2.js,stack-limit.js,regression-test-issue-4901.js,regression-test-issue-4848.js,regression-test-issue-4890.js,regression-test-issue-2190.js,regression-test-issue-2258-2963.js,regression-test-issue-2448.js,regression-test-issue-2905.js,regression-test-issue-3785.js,proxy-evil-recursion.js,regression-test-issue-5101.js | |
# | |
# ASAN_Tests_Debug: | |
# runs-on: ubuntu-latest | |
# env: | |
# ASAN_OPTIONS: detect_stack_use_after_return=1:check_initialization_order=true:strict_init_order=true | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: sudo apt update | |
# - run: sudo apt install gcc-multilib | |
# - run: >- | |
# $RUNNER -q --jerry-tests --build-debug | |
# --buildoptions=--stack-limit=0,--compile-flag=-fsanitize=address,--compile-flag=-m32,--compile-flag=-fno-omit-frame-pointer,--compile-flag=-fno-common,--compile-flag=-O2,--debug,--system-allocator=on,--linker-flag=-fuse-ld=gold | |
# --skip-list=parser-oom.js,parser-oom2.js,stack-limit.js,regression-test-issue-4901.js,regression-test-issue-4848.js,regression-test-issue-4890.js,regression-test-issue-2190.js,regression-test-issue-2258-2963.js,regression-test-issue-2448.js,regression-test-issue-2905.js,regression-test-issue-3785.js,proxy-evil-recursion.js,regression-test-issue-5101.js | |
# | |
# UBSAN_Tests: | |
# runs-on: ubuntu-latest | |
# env: | |
# UBSAN_OPTIONS: print_stacktrace=1 | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: sudo apt update | |
# - run: sudo apt install gcc-multilib | |
# - run: >- | |
# $RUNNER -q --jerry-tests | |
# --buildoptions=--compile-flag=-fsanitize=undefined,--compile-flag=-m32,--compile-flag=-fno-omit-frame-pointer,--compile-flag=-fno-common,--debug,--system-allocator=on,--linker-flag=-fuse-ld=gold | |
# --skip-list=parser-oom.js,parser-oom2.js | |
# - run: >- | |
# $RUNNER -q --jerry-tests --build-debug | |
# --buildoptions=--compile-flag=-fsanitize=undefined,--compile-flag=-m32,--compile-flag=-fno-omit-frame-pointer,--compile-flag=-fno-common,--debug,--system-allocator=on,--linker-flag=-fuse-ld=gold | |
# --skip-list=parser-oom.js,parser-oom2.js | |
# | |
# Linux_ARMv7l_Tests: | |
# runs-on: ubuntu-latest | |
# env: | |
# RUNTIME: qemu-arm-static | |
# TIMEOUT: 300 | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: sudo apt update | |
# - run: sudo apt install gcc-arm-linux-gnueabihf libc6-dev-armhf-cross qemu-user-static | |
# - run: >- | |
# $RUNNER -q --jerry-tests | |
# --buildoptions=--toolchain=cmake/toolchain_linux_armv7l.cmake,--linker-flag=-static | |
# | |
# Linux_ARMv7l_Tests_Debug: | |
# runs-on: ubuntu-latest | |
# env: | |
# RUNTIME: qemu-arm-static | |
# TIMEOUT: 300 | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: sudo apt update | |
# - run: sudo apt install gcc-arm-linux-gnueabihf libc6-dev-armhf-cross qemu-user-static | |
# - run: >- | |
# $RUNNER -q --jerry-tests --build-debug | |
# --buildoptions=--toolchain=cmake/toolchain_linux_armv7l.cmake,--linker-flag=-static | |
# | |
# Linux_AArch64_Tests: | |
# runs-on: ubuntu-latest | |
# env: | |
# RUNTIME: qemu-aarch64-static | |
# TIMEOUT: 300 | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: sudo apt update | |
# - run: sudo apt install gcc-aarch64-linux-gnu libc6-dev-armhf-cross qemu-user-static | |
# - run: >- | |
# $RUNNER -q --jerry-tests | |
# --buildoptions=--toolchain=cmake/toolchain_linux_aarch64.cmake,--linker-flag=-static | |
# | |
# Linux_AArch64_Tests_Debug: | |
# runs-on: ubuntu-latest | |
# env: | |
# RUNTIME: qemu-aarch64-static | |
# TIMEOUT: 300 | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: sudo apt update | |
# - run: sudo apt install gcc-aarch64-linux-gnu libc6-dev-armhf-cross qemu-user-static | |
# - run: >- | |
# $RUNNER -q --jerry-tests --build-debug | |
# --buildoptions=--toolchain=cmake/toolchain_linux_aarch64.cmake,--linker-flag=-static | |
# | |
# MbedOS_K64F_Build_Test: | |
# runs-on: ubuntu-latest | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: sudo apt update | |
# - run: sudo apt install gcc-arm-none-eabi ninja-build | |
# - run: make -f ./targets/os/mbedos/Makefile.travis install | |
# - run: make -f ./targets/os/mbedos/Makefile.travis script | |
# | |
# Zephyr_STM32F4_Build_Test: | |
# runs-on: ubuntu-latest | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: sudo apt update | |
# - run: sudo apt install gperf dfu-util device-tree-compiler | |
# - run: make -f ./targets/os/zephyr/Makefile.travis install | |
# - run: make -f ./targets/os/zephyr/Makefile.travis script | |
# | |
# NuttX_STM32F4_Build_Test: | |
# runs-on: ubuntu-latest | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.6' | |
# - run: sudo apt update | |
# - run: sudo apt install gcc-arm-none-eabi libnewlib-arm-none-eabi gperf | |
# - run: make -f ./targets/os/nuttx/Makefile.travis install-noapt | |
# - run: make -f ./targets/os/nuttx/Makefile.travis script | |
# | |
# RIOT_STM32F4_Build_Test: | |
# runs-on: ubuntu-latest | |
# env: | |
# CC: clang | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - run: sudo apt -y install clang gcc-arm-none-eabi | |
# - run: make -f ./targets/os/riot/Makefile.travis install-noapt | |
# - run: make -f ./targets/os/riot/Makefile.travis script | |
# | |
# ESP8266_RTOS_SDK_Build_Test: | |
# runs-on: ubuntu-latest | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '>=3.8' | |
# - run: make -f ./targets/baremetal-sdk/espressif/esp8266-rtos-sdk/Makefile.travis install-noapt | |
# - run: make -f ./targets/baremetal-sdk/espressif/esp8266-rtos-sdk/Makefile.travis script | |
# | |
# ESP_IDF_Build_Test: | |
# runs-on: ubuntu-latest | |
# steps: | |
# - uses: actions/checkout@v2 | |
# - uses: actions/setup-python@v4 | |
# with: | |
# python-version: '==3.8' | |
# - run: make -f ./targets/baremetal-sdk/espressif/esp-idf/Makefile.travis install-noapt | |
# - run: make -f ./targets/baremetal-sdk/espressif/esp-idf/Makefile.travis script | |
# | |
# Notification: | |
# runs-on: ubuntu-latest | |
# if: false && github.event_name == 'push' && github.repository == 'jerryscript-project/jerryscript' | |
# steps: | |
# - uses: rectalogic/notify-irc@v1 | |
# with: | |
# channel: '#jerryscript' | |
# nickname: jerryscript-notification | |
# message: | | |
# @${{ github.actor }}: ${{ github.repository }} (${{ github.ref }}#${{ github.sha }}) | |
# ${{ join(github.event.commits.*.message) }} | |
# ${{ github.event.compare }} |