Add support for 8 buttons to mouse report (qmk#10807)

* Add support for 8 buttons to mouse report

This includes support for 8 buttons in mousekeys.  However, this does move the keys around due to the fact that the last mousekey keycode is already 0xFF, so any past that would not work with register_code and the like, breaking them for tap hold keys, encoders, and other features.

* Update mouse key docs

* Add changes based on feedback

* Fix VUSB report size comment

Because drashna red gud

* Fix typo in action.c

* Fix IS_MOUSE_BUTTON check

* Change start range for mousekeys so that the end is 0xFF properly

* condense mousekeys check

docs/feature_mouse_keys.md

@@ -29,6 +29,9 @@ In your keymap you can use the following keycodes to map key presses to mouse ac
 |`KC_MS_BTN3`    |`KC_BTN3`|Press button 3   |
 |`KC_MS_BTN4`    |`KC_BTN4`|Press button 4   |
 |`KC_MS_BTN5`    |`KC_BTN5`|Press button 5   |
+|`KC_MS_BTN6`    |`KC_BTN6`|Press button 6   |
+|`KC_MS_BTN7`    |`KC_BTN7`|Press button 7   |
+|`KC_MS_BTN8`    |`KC_BTN8`|Press button 8   |
 |`KC_MS_WH_UP`   |`KC_WH_U`|Move wheel up    |
 |`KC_MS_WH_DOWN` |`KC_WH_D`|Move wheel down  |
 |`KC_MS_WH_LEFT` |`KC_WH_L`|Move wheel left  |

docs/feature_pointing_device.md

@@ -19,7 +19,7 @@ Keep in mind that a report_mouse_t (here "mouseReport") has the following proper
 * `mouseReport.y` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing movement (+ upward, - downward) on the y axis.
 * `mouseReport.v` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing vertical scrolling (+ upward, - downward).
 * `mouseReport.h` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing horizontal scrolling (+ right, - left).
-* `mouseReport.buttons` - this is a uint8_t in which the last 5 bits are used.  These bits represent the mouse button state - bit 3 is mouse button 5, and bit 7 is mouse button 1.
+* `mouseReport.buttons` - this is a uint8_t in which all 8 bits are used.  These bits represent the mouse button state - bit 0 is mouse button 1, and bit 7 is mouse button 8.
 
 Once you have made the necessary changes to the mouse report, you need to send it:
 

docs/ja/feature_mouse_keys.md

@@ -34,6 +34,9 @@ MOUSEKEY_ENABLE = yes
 | `KC_MS_BTN3` | `KC_BTN3` | ボタン3を押す |
 | `KC_MS_BTN4` | `KC_BTN4` | ボタン4を押す |
 | `KC_MS_BTN5` | `KC_BTN5` | ボタン5を押す |
+| `KC_MS_BTN6` | `KC_BTN6` | ボタン6を押す |
+| `KC_MS_BTN7` | `KC_BTN7` | ボタン7を押す |
+| `KC_MS_BTN8` | `KC_BTN8` | ボタン8を押す |
 | `KC_MS_WH_UP` | `KC_WH_U` | ホイールを向こう側に回転 |
 | `KC_MS_WH_DOWN` | `KC_WH_D` | ホイールを手前側に回転 |
 | `KC_MS_WH_LEFT` | `KC_WH_L` | ホイールを左に倒す |

tmk_core/common/action.c

@@ -443,6 +443,15 @@ void process_action(keyrecord_t *record, action_t action) {
                     case KC_MS_BTN5:
                         register_button(true, MOUSE_BTN5);
                         break;
+                    case KC_MS_BTN6:
+                        register_button(true, MOUSE_BTN6);
+                        break;
+                    case KC_MS_BTN7:
+                        register_button(true, MOUSE_BTN7);
+                        break;
+                    case KC_MS_BTN8:
+                        register_button(true, MOUSE_BTN8);
+                        break;
 #    endif
                     default:
                         mousekey_send();
@@ -469,6 +478,15 @@ void process_action(keyrecord_t *record, action_t action) {
                     case KC_MS_BTN5:
                         register_button(false, MOUSE_BTN5);
                         break;
+                    case KC_MS_BTN6:
+                        register_button(false, MOUSE_BTN6);
+                        break;
+                    case KC_MS_BTN7:
+                        register_button(false, MOUSE_BTN7);
+                        break;
+                    case KC_MS_BTN8:
+                        register_button(false, MOUSE_BTN8);
+                        break;
 #    endif
                     default:
                         mousekey_send();

tmk_core/common/keycode.h

@@ -39,7 +39,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define IS_MOUSEKEY(code) (KC_MS_UP <= (code) && (code) <= KC_MS_ACCEL2)
 #define IS_MOUSEKEY_MOVE(code) (KC_MS_UP <= (code) && (code) <= KC_MS_RIGHT)
-#define IS_MOUSEKEY_BUTTON(code) (KC_MS_BTN1 <= (code) && (code) <= KC_MS_BTN5)
+#define IS_MOUSEKEY_BUTTON(code) (KC_MS_BTN1 <= (code) && (code) <= KC_MS_BTN8)
 #define IS_MOUSEKEY_WHEEL(code) (KC_MS_WH_UP <= (code) && (code) <= KC_MS_WH_RIGHT)
 #define IS_MOUSEKEY_ACCEL(code) (KC_MS_ACCEL0 <= (code) && (code) <= KC_MS_ACCEL2)
 
@@ -205,6 +205,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define KC_BTN3 KC_MS_BTN3
 #define KC_BTN4 KC_MS_BTN4
 #define KC_BTN5 KC_MS_BTN5
+#define KC_BTN6 KC_MS_BTN6
+#define KC_BTN7 KC_MS_BTN7
+#define KC_BTN8 KC_MS_BTN8
 #define KC_WH_U KC_MS_WH_UP
 #define KC_WH_D KC_MS_WH_DOWN
 #define KC_WH_L KC_MS_WH_LEFT
@@ -521,15 +524,18 @@ enum internal_special_keycodes {
 
 enum mouse_keys {
     /* Mouse Buttons */
-    KC_MS_UP = 0xF0,
+    KC_MS_UP = 0xED,
     KC_MS_DOWN,
     KC_MS_LEFT,
-    KC_MS_RIGHT,
+    KC_MS_RIGHT,  // 0xF0
     KC_MS_BTN1,
     KC_MS_BTN2,
     KC_MS_BTN3,
     KC_MS_BTN4,
     KC_MS_BTN5,
+    KC_MS_BTN6,
+    KC_MS_BTN7,
+    KC_MS_BTN8,
 
     /* Mouse Wheel */
     KC_MS_WH_UP,
@@ -540,5 +546,5 @@ enum mouse_keys {
     /* Acceleration */
     KC_MS_ACCEL0,
     KC_MS_ACCEL1,
-    KC_MS_ACCEL2
+    KC_MS_ACCEL2  // 0xFF
 };

tmk_core/common/mousekey.c

@@ -278,16 +278,8 @@ void mousekey_on(uint8_t code) {
         mouse_report.h = wheel_unit() * -1;
     else if (code == KC_MS_WH_RIGHT)
         mouse_report.h = wheel_unit();
-    else if (code == KC_MS_BTN1)
-        mouse_report.buttons |= MOUSE_BTN1;
-    else if (code == KC_MS_BTN2)
-        mouse_report.buttons |= MOUSE_BTN2;
-    else if (code == KC_MS_BTN3)
-        mouse_report.buttons |= MOUSE_BTN3;
-    else if (code == KC_MS_BTN4)
-        mouse_report.buttons |= MOUSE_BTN4;
-    else if (code == KC_MS_BTN5)
-        mouse_report.buttons |= MOUSE_BTN5;
+    else if (IS_MOUSEKEY_BUTTON(code))
+        mouse_report.buttons |= 1 << (code - KC_MS_BTN1);
     else if (code == KC_MS_ACCEL0)
         mousekey_accel |= (1 << 0);
     else if (code == KC_MS_ACCEL1)
@@ -313,16 +305,8 @@ void mousekey_off(uint8_t code) {
         mouse_report.h = 0;
     else if (code == KC_MS_WH_RIGHT && mouse_report.h > 0)
         mouse_report.h = 0;
-    else if (code == KC_MS_BTN1)
-        mouse_report.buttons &= ~MOUSE_BTN1;
-    else if (code == KC_MS_BTN2)
-        mouse_report.buttons &= ~MOUSE_BTN2;
-    else if (code == KC_MS_BTN3)
-        mouse_report.buttons &= ~MOUSE_BTN3;
-    else if (code == KC_MS_BTN4)
-        mouse_report.buttons &= ~MOUSE_BTN4;
-    else if (code == KC_MS_BTN5)
-        mouse_report.buttons &= ~MOUSE_BTN5;
+    else if (IS_MOUSEKEY_BUTTON(code))
+        mouse_report.buttons &= ~(1 << (code - KC_MS_BTN1));
     else if (code == KC_MS_ACCEL0)
         mousekey_accel &= ~(1 << 0);
     else if (code == KC_MS_ACCEL1)
@@ -423,16 +407,8 @@ void mousekey_on(uint8_t code) {
         mouse_report.h = w_offset * -1;
     else if (code == KC_MS_WH_RIGHT)
         mouse_report.h = w_offset;
-    else if (code == KC_MS_BTN1)
-        mouse_report.buttons |= MOUSE_BTN1;
-    else if (code == KC_MS_BTN2)
-        mouse_report.buttons |= MOUSE_BTN2;
-    else if (code == KC_MS_BTN3)
-        mouse_report.buttons |= MOUSE_BTN3;
-    else if (code == KC_MS_BTN4)
-        mouse_report.buttons |= MOUSE_BTN4;
-    else if (code == KC_MS_BTN5)
-        mouse_report.buttons |= MOUSE_BTN5;
+    else if (IS_MOUSEKEY_BUTTON(code))
+        mouse_report.buttons |= 1 << (code - KC_MS_BTN1);
     else if (code == KC_MS_ACCEL0)
         mk_speed = mkspd_0;
     else if (code == KC_MS_ACCEL1)
@@ -462,16 +438,8 @@ void mousekey_off(uint8_t code) {
         mouse_report.h = 0;
     else if (code == KC_MS_WH_RIGHT && mouse_report.h > 0)
         mouse_report.h = 0;
-    else if (code == KC_MS_BTN1)
-        mouse_report.buttons &= ~MOUSE_BTN1;
-    else if (code == KC_MS_BTN2)
-        mouse_report.buttons &= ~MOUSE_BTN2;
-    else if (code == KC_MS_BTN3)
-        mouse_report.buttons &= ~MOUSE_BTN3;
-    else if (code == KC_MS_BTN4)
-        mouse_report.buttons &= ~MOUSE_BTN4;
-    else if (code == KC_MS_BTN5)
-        mouse_report.buttons &= ~MOUSE_BTN5;
+    else if (IS_MOUSEKEY_BUTTON(code))
+        mouse_report.buttons &= ~(1 << (code - KC_MS_BTN1));
 #    ifdef MK_MOMENTARY_ACCEL
     else if (code == KC_MS_ACCEL0)
         mk_speed = mkspd_DEFAULT;

tmk_core/common/report.h

@@ -39,7 +39,10 @@ enum mouse_buttons {
     MOUSE_BTN2 = (1 << 1),
     MOUSE_BTN3 = (1 << 2),
     MOUSE_BTN4 = (1 << 3),
-    MOUSE_BTN5 = (1 << 4)
+    MOUSE_BTN5 = (1 << 4),
+    MOUSE_BTN6 = (1 << 5),
+    MOUSE_BTN7 = (1 << 6),
+    MOUSE_BTN8 = (1 << 7)
 };
 
 /* Consumer Page (0x0C)

tmk_core/protocol/usb_descriptor.c

@@ -116,19 +116,15 @@ const USB_Descriptor_HIDReport_Datatype_t PROGMEM SharedReport[] = {
 #    endif
         HID_RI_USAGE(8, 0x01),             // Pointer
         HID_RI_COLLECTION(8, 0x00),        // Physical
-            // Buttons (5 bits)
+            // Buttons (8 bits)
             HID_RI_USAGE_PAGE(8, 0x09),    // Button
             HID_RI_USAGE_MINIMUM(8, 0x01), // Button 1
-            HID_RI_USAGE_MAXIMUM(8, 0x05), // Button 5
+            HID_RI_USAGE_MAXIMUM(8, 0x08), // Button 8
             HID_RI_LOGICAL_MINIMUM(8, 0x00),
             HID_RI_LOGICAL_MAXIMUM(8, 0x01),
-            HID_RI_REPORT_COUNT(8, 0x05),
+            HID_RI_REPORT_COUNT(8, 0x08),
             HID_RI_REPORT_SIZE(8, 0x01),
             HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
-            // Button padding (3 bits)
-            HID_RI_REPORT_COUNT(8, 0x01),
-            HID_RI_REPORT_SIZE(8, 0x03),
-            HID_RI_INPUT(8, HID_IOF_CONSTANT),
 
             // X/Y position (2 bytes)
             HID_RI_USAGE_PAGE(8, 0x01),    // Generic Desktop
@@ -356,7 +352,7 @@ const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = {
         .Type                   = DTYPE_Device
     },
     .USBSpecification           = VERSION_BCD(1, 1, 0),
-    
+
 #if VIRTSER_ENABLE
     .Class                      = USB_CSCP_IADDeviceClass,
     .SubClass                   = USB_CSCP_IADDeviceSubclass,

tmk_core/protocol/vusb/vusb.c

@@ -444,19 +444,15 @@ const PROGMEM uchar shared_hid_report[] = {
     0x85, REPORT_ID_MOUSE,  //   Report ID
     0x09, 0x01,             //   Usage (Pointer)
     0xA1, 0x00,             //   Collection (Physical)
-    // Buttons (5 bits)
+    // Buttons (8 bits)
     0x05, 0x09,  //     Usage Page (Button)
     0x19, 0x01,  //     Usage Minimum (Button 1)
-    0x29, 0x05,  //     Usage Maximum (Button 5)
+    0x29, 0x08,  //     Usage Maximum (Button 8)
     0x15, 0x00,  //     Logical Minimum (0)
     0x25, 0x01,  //     Logical Maximum (1)
-    0x95, 0x05,  //     Report Count (5)
+    0x95, 0x08,  //     Report Count (8)
     0x75, 0x01,  //     Report Size (1)
     0x81, 0x02,  //     Input (Data, Variable, Absolute)
-    // Button padding (3 bits)
-    0x95, 0x01,  //     Report Count (1)
-    0x75, 0x03,  //     Report Size (3)
-    0x81, 0x03,  //     Input (Constant)
 
     // X/Y position (2 bytes)
     0x05, 0x01,  //     Usage Page (Generic Desktop)