COLLECTION-model4841

Sources and required libraries for the MCCI® Model 4841 Air Quality Sensor.

This repo is mostly submodules; clone it using git clone --recursive.

The script build-with-cli.sh can be used to build the model4841-production-lorawan sketch using the arduino-cli.

This corresponds to MCCI document 234001363.

To build:

1. Clone this repository:

   git clone --recursive git@github.com:mcci-catena/COLLECTION-model4841.git

2. If building with a project secure key, get a copy of that key and put it someplace handy; please make sure it's password protected, at least.

3. Build with the following commands:

   • to build with the test-signing key:

     ./build-with-cli --test

   • to build with a project-specific key:

     ./build-with-cli --key={path-to-file}.pem

   • to build for 32 MHz clock, for Europe, with the test-signing key:

     ./build-with-cli.sh --clock=32 --region=eu868 --test

   • to build for multiple regions and multiple networks:

     ./build-with-cli.sh --test --verbose && ./build-with-cli.sh --test --verbose --region=au915 --network=ttn && ./build-with-cli.sh --test --verbose --region=eu868 --network=ttn

   The output shows up in {slug}/build/ide, where {slug} represents the sketch and key configuration options.

---

Meta

Trademarks and copyright

MCCI and MCCI Catena are registered trademarks of MCCI Corporation. LoRa is a registered trademark of Semtech Corporation. LoRaWAN is a registered trademark of the LoRa Alliance.

This document and the contents of this repository are copyright 2021-2022, MCCI Corporation.

License

This repository is released under the MIT license. Commercial licenses are also available from MCCI Corporation.

Support Open Source Hardware and Software

MCCI invests time and resources providing this open source code, please support MCCI and open-source hardware by purchasing products from MCCI, Adafruit and other open-source hardware/software vendors!

For information about MCCI's products, please visit store.mcci.com.