Kingroon KP3S 3.0 Marlin Firmware

Kingroon KP3S 3.0 with Titan extruder and GD32F103 and F303 chipset.

Marlin Firmware build from v2.1.2.x-bufix of 20240908

Main features:
MBL Manual Bed leveling,
ABL Automated Bed Leveling for BL Touch,
16 points for manual mesh leveling,
16 points for automated mesh leveling,
input shaping,
linear advance,
power loss recovery,
runout sensor support (off by default),
5 languages,
portrait screen,
long file name scrolling,
double touch select,
babystepping,
290°C and 350°C hotend (*)
110°C bed temp.

Choose the right firmware for you configuration, copy Robin_nano.bin file on the microSD, and insert the card into the SD slot of the printer. Switch on and wait for flashing.

Remember to add M420 S1 L1 to load mesh into your slicer's start Gcode for your printer.

(*) HT-NTC 100K B3950 thermistor with stainless steel capsule is mandatory for 350°C version. Due to the 3mm metal capsule an updated heatblock is needed.

How to flash. Download and uncompress ZIP archive. Choose the directory of your printer setup, copy Robin_nano.bin file into SD card, insert and switch on printer to update.