Update README.md

README.md

@@ -84,27 +84,32 @@ sc.exe start matrix
 ## Usage
 
 1. **Setup for VMware Workstation**
- - Build the Project: Follow the build instructions provided in the previous sections to compile the project.
+
+ Build the Project: Follow the build instructions provided in the previous sections to compile the project.
 
 2. **Set Up VMware Workstation**
- - Configure the VMware serial port for debugging.
+
+ Configure the VMware serial port for debugging.
 
 ![VMware Serial Port Settings](./images/vmware_serial.png)
 **Figure 1: VMware Serial Port Settings**
 
-- Ensure that `"Virtualize Intel VT-x/EPT or AMD-V/RVI"` is enabled and `"Virtualize IOMMU (IO memory management unit)"` is enabled.
+  Ensure that `"Virtualize Intel VT-x/EPT or AMD-V/RVI"` is enabled and `"Virtualize IOMMU (IO memory management unit)"` is enabled.
 
 ![VMware Processors Settings](./images/vmware_processors.png)
 **Figure 2: VMware Processors Settings**
 
 3. **Copy the Driver**
- - Copy the `matrix.sys` driver to the `C:\Windows\System32\drivers` directory.
+
+ Copy the `matrix.sys` driver to the `C:\Windows\System32\drivers` directory.
 
 4. **VMware Serial Port Debugging**
- - Execute the PowerShell script in the Serial Port Debugging section to open the serial port.
+
+ Execute the PowerShell script in the Serial Port Debugging section to open the serial port.
 
 5. **Load the Hypervisor**
- - Use the `load.ps1` PowerShell script shown in the Service Management section to create and start the hypervisor service.
+
+ Use the `load.ps1` PowerShell script shown in the Service Management section to create and start the hypervisor service.
 
 ![Load Hypervisor](./images/hypervisor_load.png)
 **Figure 3: Load Hypervisor**