Add support for TFA Dostmann 14.1504.V2 Radio-controlled grill and me…

…at thermometer (#2288)

include/rtl_433_devices.h

@@ -231,6 +231,7 @@
  DECL(fineoffset_wn34) \
  DECL(rubicson_pool_48942) \
  DECL(badger_orion) \
+ DECL(tfa_14_1504_v2) \
 
  /* Add new decoders here. */
 

src/CMakeLists.txt

@@ -203,6 +203,7 @@ add_library(r_433 STATIC
  devices/springfield.c
  devices/steelmate.c
  devices/telldus_ft0385r.c
+ devices/tfa_14_1504_v2.c
  devices/tfa_30_3196.c
  devices/tfa_30_3221.c
  devices/tfa_drop_30.3233.c

src/devices/tfa_14_1504_v2.c

@@ -0,0 +1,141 @@
+/** @file
+ Decoder for TFA Dostmann 14.1504.V2 (30.3254.01)
+ Radio-controlled grill and meat thermometer
+
+ Copyright (C) 2022-2023 Joël Bourquard <joel.bourquard@gmail.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+*/
+
+/**
+Decoder for TFA Dostmann 14.1504.V2 (30.3254.01)
+
+CAUTION: Do not confuse with TFA Dostmann 14.1504 (30.3201) which had a completely different protocol => [71] Maverick ET-732/733 BBQ Sensor
+
+Payload format:
+- Preamble {36} 0x7aaaaaa5c (for robustness we only use the tail: {24}0xaaaa5c)
+- Flags {4} OR between: 0x2=battery ok, 0x5=resync button
+- Temperature {12} Raw temperature value. Temperature in ºC = (value/4)-532. Example: 0x8a0 = 20 ºC
+- Separator {8} 0xff (differs if resync)
+- Digest {16} 16-bit LFSR digest + final XOR
+
+To get raw data:
+```
+rtl_433 -R 0 -X 'n=TFA-141504v2,m=FSK_PCM,s=360,l=360,r=4096,preamble={24}aaaa5c'
+```
+
+Example payloads (excluding preamble):
+- Resync = 7052f9cee3 (encoding differs from temperature readings => not handled)
+- No probe = 2700ffb791 (just like a temperature reading => in this case we report the appropriate probe status and no temperature reading)
+- ...
+- 20 ºC = 28a0ffce69
+- 21 ºC = 28a4ffa0f5
+- ...
+- 24 ºC = 28b0ff6438
+- ...
+- 44 ºC = 2900ff8c9d
+- ...
+*/
+
+#include "decoder.h"
+
+#define NUM_BITS_PREAMBLE 24
+#define NUM_BYTES_DATA 5
+#define OFFSET_MIC (NUM_BYTES_DATA - 2)
+#define NUM_BITS_DATA (NUM_BYTES_DATA * 8)
+#define NUM_BITS_TOTAL (NUM_BITS_PREAMBLE + NUM_BITS_DATA)
+#define NUM_BITS_MAX (NUM_BITS_TOTAL + 12)
+
+static int tfa_14_1504_v2_callback(r_device *decoder, bitbuffer_t *bitbuffer)
+{
+ uint8_t const preamble[] = {
+ 0xaa,
+ 0xaa,
+ 0x5c,
+ };
+
+ if (bitbuffer->num_rows != 1) {
+ return DECODE_ABORT_EARLY;
+ }
+ unsigned const row = 0;
+
+ // Optional optimization: Early exit if row too short
+ if (bitbuffer->bits_per_row[row] < NUM_BITS_TOTAL) {
+ return DECODE_ABORT_EARLY; // considered "early" because preamble not checked
+ }
+
+ // Sync on preamble
+ unsigned start_pos = bitbuffer_search(bitbuffer, row, 0, preamble, NUM_BITS_PREAMBLE);
+
+ if (start_pos == bitbuffer->bits_per_row[row]) {
+ return DECODE_ABORT_EARLY; // no preamble detected
+ }
+
+ const unsigned available_bits = bitbuffer->bits_per_row[row] - start_pos;
+
+ // check min length
+ if (available_bits < NUM_BITS_TOTAL ||
+ available_bits > NUM_BITS_MAX) {
+ return DECODE_ABORT_LENGTH;
+ }
+
+ uint8_t data[NUM_BYTES_DATA];
+ bitbuffer_extract_bytes(bitbuffer, row, start_pos + NUM_BITS_PREAMBLE, data, NUM_BITS_DATA);
+
+ uint8_t flags = data[0] >> 4;
+ // ignore resync button
+ if ((flags & 0x5) == 0x5) {
+ return DECODE_FAIL_SANITY;
+ }
+ unsigned battery_ok = (flags & 0x2) != 0;
+
+ if (data[2] != 0xff) {
+ return DECODE_FAIL_SANITY;
+ }
+
+ uint16_t calc_mic = lfsr_digest16(data, OFFSET_MIC, 0x8810, 0x0d42) ^ 0x16eb;
+ uint16_t data_mic = (data[OFFSET_MIC] << 8) + data[OFFSET_MIC+1];
+ if (calc_mic != data_mic) {
+ return DECODE_FAIL_MIC;
+ }
+
+ // we discard the last 2 bits as those are always zero
+ uint16_t raw_temp_c = ((data[0] & 0xf) << 6) + (data[1] >> 2);
+ unsigned is_probe_connected = (raw_temp_c != 0x1c0);
+ double temp_c = ((int)raw_temp_c) - 532;
+
+ /* clang-format off */
+ data_t *output = data_make(
+ "model", "", DATA_STRING, "TFA-141504v2",
+ "battery_ok", "Battery", DATA_INT, battery_ok,
+ "probe_fail", "Probe failure", DATA_INT, !is_probe_connected,
+ "temperature_C", "Temperature", DATA_COND, is_probe_connected, DATA_FORMAT, "%.0f C", DATA_DOUBLE, temp_c,
+ "mic", "Integrity", DATA_STRING, "CRC",
+ NULL);
+ /* clang-format on */
+
+ decoder_output_data(decoder, output);
+ return 1;
+}
+
+static char *output_fields[] = {
+ "model",
+ "battery_ok",
+ "probe_fail",
+ "temperature_C",
+ "mic",
+ NULL,
+};
+
+r_device tfa_14_1504_v2 = {
+ .name = "TFA Dostmann 14.1504.V2 Radio-controlled grill and meat thermometer",
+ .modulation = FSK_PULSE_PCM,
+ .short_width = 360,
+ .long_width = 360,
+ .reset_limit = 4096,
+ .decode_fn = &tfa_14_1504_v2_callback,
+ .fields = output_fields,
+};