Skip to content

Commit

Permalink
drivers: tty: serial: cpm_uart: fix styling issues
Browse files Browse the repository at this point in the history 
Fix checkpatch errors:

    ERROR: else should follow close brace '}'
    torvalds#121: FILE: drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c:121:
    +	}
    +	else

    WARNING: line over 80 characters
    torvalds#150: FILE: drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c:150:
    +					 pinfo->tx_fifosize), (void __force *)pinfo->mem_addr,

    WARNING: Block comments should align the * on each line
    torvalds#66: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:66:
    + * Check, if transmit buffers are processed
    +*/

    WARNING: braces {} are not necessary for any arm of this statement
    torvalds#170: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:170:
    +		if (IS_SMC(pinfo)) {
    [...]
    +		} else {
    [...]

    WARNING: labels should not be indented
    torvalds#292: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:292:
    +		      error_return:

    ERROR: code indent should use tabs where possible
    torvalds#299: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:299:
    +^I^I                        BD_SC_OV | BD_SC_ID);$

    WARNING: labels should not be indented
    torvalds#319: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:319:
    +      handle_error:

    WARNING: line over 80 characters
    torvalds#423: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:423:
    +		setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT));

    ERROR: space required before the open parenthesis '('
    torvalds#451: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:451:
    +		while(!cpm_uart_tx_empty(port)) {

    WARNING: Missing a blank line after declarations
    torvalds#462: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:462:
    +			smc_t __iomem *smcp = pinfo->smcp;
    +			clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);

    WARNING: line over 80 characters
    torvalds#466: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:466:
    +			clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);

    WARNING: Missing a blank line after declarations
    torvalds#466: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:466:
    +			scc_t __iomem *sccp = pinfo->sccp;
    +			clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);

    ERROR: code indent should use tabs where possible
    torvalds#484: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:484:
    +                                 struct ktermios *termios,$

    WARNING: please, no spaces at the start of a line
    torvalds#484: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:484:
    +                                 struct ktermios *termios,$

    ERROR: code indent should use tabs where possible
    torvalds#485: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:485:
    +                                 struct ktermios *old)$

    WARNING: please, no spaces at the start of a line
    torvalds#485: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:485:
    +                                 struct ktermios *old)$

    WARNING: line over 80 characters
    torvalds#624: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:624:
    +		/* Output in *one* operation, so we don't interrupt RX/TX if they

    WARNING: Block comments use a trailing */ on a separate line
    torvalds#625: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:625:
    +		 * were already enabled. */

    WARNING: line over 80 characters
    torvalds#629: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:629:
    +		out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize);

    WARNING: line over 80 characters
    torvalds#773: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:773:
    +	mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);

    ERROR: code indent should use tabs where possible
    torvalds#797: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:797:
    +^I         (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);$

    ERROR: code indent should use tabs where possible
    torvalds#799: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:799:
    +^I         (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);$

    ERROR: code indent should use tabs where possible
    torvalds#836: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:836:
    +^I         SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);$

    ERROR: code indent should use tabs where possible
    torvalds#859: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:859:
    +^I         (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);$

    ERROR: code indent should use tabs where possible
    torvalds#861: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:861:
    +^I         (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);$

    WARNING: space prohibited between function name and open parenthesis '('
    torvalds#866: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:866:
    +#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH)

    WARNING: line over 80 characters
    torvalds#921: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:921:
    +		clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);

    WARNING: Missing a blank line after declarations
    torvalds#462: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:462:
    +			smc_t __iomem *smcp = pinfo->smcp;
    +			clrbits16(&smcp->smc_smcmr,

    WARNING: Missing a blank line after declarations
    torvalds#467: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:467:
    +			scc_t __iomem *sccp = pinfo->sccp;
    +			clrbits32(&sccp->scc_gsmrl,

    ERROR: code indent should use tabs where possible
    #1151: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1151:
    +                              struct uart_cpm_port *pinfo)$

    WARNING: please, no spaces at the start of a line
    #1151: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1151:
    +                              struct uart_cpm_port *pinfo)$

    ERROR: "(foo*)" should be "(foo *)"
    #1161: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1161:
    +		struct clk *clk = clk_get(NULL, (const char*)data);

    WARNING: Missing a blank line after declarations
    #1162: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1162:
    +		struct clk *clk = clk_get(NULL, (const char*)data);
    +		if (!IS_ERR(clk))

    ERROR: code indent should use tabs where possible
    #1169: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1169:
    +^I^I^I                "fsl,cpm-brg property.\n", np);$

    ERROR: code indent should use tabs where possible
    #1178: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1178:
    +^I^I                "fsl,cpm-command property.\n", np);$

    ERROR: code indent should use tabs where possible
    #1192: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1192:

    WARNING: braces {} are not necessary for any arm of this statement
    #1279: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1279:
    +	if (unlikely(nolock)) {
    [...]
    +	} else {
    [...]

    WARNING: braces {} are not necessary for any arm of this statement
    #1287: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1287:
    +	if (unlikely(nolock)) {
    [...]
    +	} else {
    [...]

    WARNING: line over 80 characters
    #1354: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1354:
    +		clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);

    ERROR: Macros with complex values should be enclosed in parentheses
    #1394: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1394:
    +#define CPM_UART_CONSOLE	&cpm_scc_uart_console

    WARNING: Missing a blank line after declarations
    #1437: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1437:
    +	struct uart_cpm_port *pinfo = platform_get_drvdata(ofdev);
    +	return uart_remove_one_port(&cpm_reg, &pinfo->port);

    WARNING: please, no spaces at the start of a line
    #1464: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1464:
    + };$

    WARNING: Missing a blank line after declarations
    #1469: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1469:
    +	int ret = uart_register_driver(&cpm_reg);
    +	if (ret)

    WARNING: Missing a blank line after declarations
    torvalds#1062: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1062:
    +	int		i;
    +	volatile cbd_t	*bdp;

    ERROR: "foo * bar" should be "foo *bar"
    torvalds#19: FILE: drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h:19:
    +static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup)

    ERROR: "foo * bar" should be "foo *bar"
    torvalds#25: FILE: drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h:25:
    +static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up)

    WARNING: Improper SPDX comment style for 'drivers/tty/serial/cpm_uart/cpm_uart.h', please use '/*' instead
    #1: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:1:
    +// SPDX-License-Identifier: GPL-2.0

    WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
    #1: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:1:
    +// SPDX-License-Identifier: GPL-2.0

    WARNING: Block comments use * on subsequent lines
    torvalds#106: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:106:
    +/*
    +   virtual to phys transtalion

    ERROR: code indent should use tabs where possible
    torvalds#109: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:109:
    +                                         struct uart_cpm_port *pinfo)$

    WARNING: please, no spaces at the start of a line
    torvalds#109: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:109:
    +                                         struct uart_cpm_port *pinfo)$

    ERROR: code indent should use tabs where possible
    torvalds#125: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:125:
    +                                 struct uart_cpm_port *pinfo)$

    WARNING: please, no spaces at the start of a line
    torvalds#125: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:125:
    +                                 struct uart_cpm_port *pinfo)$

Signed-off-by: Enrico Weigelt <info@metux.net>
  • Loading branch information
@metux
metux committed Feb 8, 2021
1 parent 00f2be4 commit c413aa7
Show file tree
Hide file tree
Showing 4 changed files with 62 additions and 49 deletions.
8 changes: 4 additions & 4 deletions drivers/tty/serial/cpm_uart/cpm_uart.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -105,10 +105,10 @@ void scc3_lineif(struct uart_cpm_port *pinfo);
void scc4_lineif(struct uart_cpm_port *pinfo);

/*
virtual to phys transtalion
*/
* virtual to phys transtalion
*/
static inline unsigned long cpu2cpm_addr(void *addr,
struct uart_cpm_port *pinfo)
struct uart_cpm_port *pinfo)
{
int offset;
u32 val = (u32)addr;
Expand All @@ -124,7 +124,7 @@ static inline unsigned long cpu2cpm_addr(void *addr,
}

static inline void *cpm2cpu_addr(unsigned long addr,
struct uart_cpm_port *pinfo)
struct uart_cpm_port *pinfo)
{
int offset;
u32 val = addr;
Expand Down
93 changes: 53 additions & 40 deletions drivers/tty/serial/cpm_uart/cpm_uart_core.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -58,7 +58,7 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);

/*
* Check, if transmit buffers are processed
*/
*/
static unsigned int cpm_uart_tx_empty(struct uart_port *port)
{
struct uart_cpm_port *pinfo =
Expand Down Expand Up @@ -162,11 +162,10 @@ static void cpm_uart_start_tx(struct uart_port *port)
}

if (cpm_uart_tx_pump(port) != 0) {
if (IS_SMC(pinfo)) {
if (IS_SMC(pinfo))
setbits8(&smcp->smc_smcm, SMCM_TX);
} else {
else
setbits16(&sccp->scc_sccm, UART_SCCM_TX);
}
}
}

Expand Down Expand Up @@ -284,14 +283,14 @@ static void cpm_uart_int_rx(struct uart_port *port)
return;
}
#endif
error_return:
error_return:
tty_insert_flip_char(tport, ch, flg);

} /* End while (i--) */

/* This BD is ready to be used again. Clear status. get next */
clrbits16(&bdp->cbd_sc, BD_SC_BR | BD_SC_FR | BD_SC_PR |
BD_SC_OV | BD_SC_ID);
BD_SC_OV | BD_SC_ID);
setbits16(&bdp->cbd_sc, BD_SC_EMPTY);

if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
Expand All @@ -311,7 +310,7 @@ static void cpm_uart_int_rx(struct uart_port *port)

/* Error processing */

handle_error:
handle_error:
/* Statistics */
if (status & BD_SC_BR)
port->icount.brk++;
Expand Down Expand Up @@ -422,7 +421,8 @@ static int cpm_uart_startup(struct uart_port *port)
setbits16(&pinfo->smcp->smc_smcmr, (SMCMR_REN | SMCMR_TEN));
} else {
setbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX);
setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT));
setbits32(&pinfo->sccp->scc_gsmrl,
(SCC_GSMRL_ENR | SCC_GSMRL_ENT));
}

return 0;
Expand Down Expand Up @@ -450,7 +450,7 @@ static void cpm_uart_shutdown(struct uart_port *port)
/* If the port is not the console, disable Rx and Tx. */
if (!(pinfo->flags & FLAG_CONSOLE)) {
/* Wait for all the BDs marked sent */
while(!cpm_uart_tx_empty(port)) {
while (!cpm_uart_tx_empty(port)) {
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(2);
}
Expand All @@ -461,12 +461,17 @@ static void cpm_uart_shutdown(struct uart_port *port)
/* Stop uarts */
if (IS_SMC(pinfo)) {
smc_t __iomem *smcp = pinfo->smcp;
clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);

clrbits16(&smcp->smc_smcmr,
SMCMR_REN | SMCMR_TEN);
clrbits8(&smcp->smc_smcm, SMCM_RX | SMCM_TX);
} else {
scc_t __iomem *sccp = pinfo->sccp;
clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
clrbits16(&sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);

clrbits32(&sccp->scc_gsmrl,
SCC_GSMRL_ENR | SCC_GSMRL_ENT);
clrbits16(&sccp->scc_sccm,
UART_SCCM_TX | UART_SCCM_RX);
}

/* Shut them really down and reinit buffer descriptors */
Expand All @@ -483,8 +488,8 @@ static void cpm_uart_shutdown(struct uart_port *port)
}

static void cpm_uart_set_termios(struct uart_port *port,
struct ktermios *termios,
struct ktermios *old)
struct ktermios *termios,
struct ktermios *old)
{
int baud;
unsigned long flags;
Expand Down Expand Up @@ -621,12 +626,14 @@ static void cpm_uart_set_termios(struct uart_port *port,
* present.
*/
prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN);
/* Output in *one* operation, so we don't interrupt RX/TX if they
* were already enabled. */
/* Output in *one* operation, so we don't interrupt RX/TX if
* they were already enabled.
*/
out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval |
SMCMR_SM_UART | prev_mode);
} else {
out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize);
out_be16(&pinfo->sccup->scc_genscc.scc_mrblr,
pinfo->rx_fifosize);
out_be16(&pinfo->sccup->scc_maxidl, maxidl);
out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
}
Expand Down Expand Up @@ -770,7 +777,8 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
* buffers in the buffer descriptors, and the
* virtual address for us to work with.
*/
mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
mem_addr = pinfo->mem_addr +
L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
bdp = pinfo->tx_cur = pinfo->tx_bd_base;
for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo));
Expand All @@ -794,9 +802,9 @@ static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)

/* Store address */
out_be16(&pinfo->sccup->scc_genscc.scc_rbase,
(u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);
(u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);
out_be16(&pinfo->sccup->scc_genscc.scc_tbase,
(u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);
(u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);

/* Set up the uart parameters in the
* parameter ram.
Expand Down Expand Up @@ -833,7 +841,7 @@ static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
*/
out_be32(&scp->scc_gsmrh, 0);
out_be32(&scp->scc_gsmrl,
SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);

/* Enable rx interrupts and clear all pending events. */
out_be16(&scp->scc_sccm, 0);
Expand All @@ -856,9 +864,9 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)

/* Store address */
out_be16(&pinfo->smcup->smc_rbase,
(u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);
(u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);
out_be16(&pinfo->smcup->smc_tbase,
(u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);
(u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);

/*
* In case SMC is being relocated...
Expand Down Expand Up @@ -913,8 +921,10 @@ static int cpm_uart_request_port(struct uart_port *port)
clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX);
clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
} else {
clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
clrbits16(&pinfo->sccp->scc_sccm,
UART_SCCM_TX | UART_SCCM_RX);
clrbits32(&pinfo->sccp->scc_gsmrl,
SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}

ret = cpm_uart_allocbuf(pinfo, 0);
Expand Down Expand Up @@ -1044,9 +1054,10 @@ static int poll_chars;
static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo)
{
u_char c, *cp;
volatile cbd_t *bdp;
int i;

volatile cbd_t *bdp;

/* Get the address of the host memory buffer.
*/
bdp = pinfo->rx_cur;
Expand Down Expand Up @@ -1134,7 +1145,7 @@ static const struct uart_ops cpm_uart_pops = {
struct uart_cpm_port cpm_uart_ports[UART_NR];

static int cpm_uart_init_port(struct device_node *np,
struct uart_cpm_port *pinfo)
struct uart_cpm_port *pinfo)
{
const u32 *data;
void __iomem *mem, *pram;
Expand All @@ -1145,15 +1156,16 @@ static int cpm_uart_init_port(struct device_node *np,

data = of_get_property(np, "clock", NULL);
if (data) {
struct clk *clk = clk_get(NULL, (const char*)data);
struct clk *clk = clk_get(NULL, (const char *)data);

if (!IS_ERR(clk))
pinfo->clk = clk;
}
if (!pinfo->clk) {
data = of_get_property(np, "fsl,cpm-brg", &len);
if (!data || len != 4) {
dev_err(port->dev, "CPM UART %pOFn has no/invalid "
"fsl,cpm-brg property.\n", np);
"fsl,cpm-brg property.\n", np);
return -EINVAL;
}
pinfo->brg = *data;
Expand All @@ -1162,7 +1174,7 @@ static int cpm_uart_init_port(struct device_node *np,
data = of_get_property(np, "fsl,cpm-command", &len);
if (!data || len != 4) {
dev_err(port->dev, "CPM UART %pOFn has no/invalid "
"fsl,cpm-command property.\n", np);
"fsl,cpm-command property.\n", np);
return -EINVAL;
}
pinfo->command = *data;
Expand All @@ -1176,7 +1188,7 @@ static int cpm_uart_init_port(struct device_node *np,
pinfo->sccp = mem;
pinfo->sccup = pram = cpm_uart_map_pram(pinfo, np);
} else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") ||
of_device_is_compatible(np, "fsl,cpm2-smc-uart")) {
of_device_is_compatible(np, "fsl,cpm2-smc-uart")) {
pinfo->flags |= FLAG_SMC;
pinfo->smcp = mem;
pinfo->smcup = pram = cpm_uart_map_pram(pinfo, np);
Expand Down Expand Up @@ -1265,19 +1277,17 @@ static void cpm_uart_console_write(struct console *co, const char *s,
unsigned long flags;
int nolock = oops_in_progress;

if (unlikely(nolock)) {
if (unlikely(nolock))
local_irq_save(flags);
} else {
else
spin_lock_irqsave(&pinfo->port.lock, flags);
}

cpm_uart_early_write(pinfo, s, count, true);

if (unlikely(nolock)) {
if (unlikely(nolock))
local_irq_restore(flags);
} else {
else
spin_unlock_irqrestore(&pinfo->port.lock, flags);
}
}


Expand Down Expand Up @@ -1340,7 +1350,8 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
out_be16(&pinfo->sccup->scc_brkcr, 0);
cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX);
clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
clrbits32(&pinfo->sccp->scc_gsmrl,
SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}

ret = cpm_uart_allocbuf(pinfo, 1);
Expand Down Expand Up @@ -1381,7 +1392,7 @@ static int __init cpm_uart_console_init(void)

console_initcall(cpm_uart_console_init);

#define CPM_UART_CONSOLE &cpm_scc_uart_console
#define CPM_UART_CONSOLE (&cpm_scc_uart_console)
#else
#define CPM_UART_CONSOLE NULL
#endif
Expand Down Expand Up @@ -1424,6 +1435,7 @@ static int cpm_uart_probe(struct platform_device *ofdev)
static int cpm_uart_remove(struct platform_device *ofdev)
{
struct uart_cpm_port *pinfo = platform_get_drvdata(ofdev);

return uart_remove_one_port(&cpm_reg, &pinfo->port);
}

Expand Down Expand Up @@ -1451,11 +1463,12 @@ static struct platform_driver cpm_uart_driver = {
},
.probe = cpm_uart_probe,
.remove = cpm_uart_remove,
};
};

static int __init cpm_uart_init(void)
{
int ret = uart_register_driver(&cpm_reg);

if (ret)
return ret;

Expand Down
4 changes: 2 additions & 2 deletions drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -16,13 +16,13 @@ static inline void cpm_set_brg(int brg, int baud)
cpm_setbrg(brg, baud);
}

static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup)
static inline void cpm_set_scc_fcr(scc_uart_t __iomem *sup)
{
out_8(&sup->scc_genscc.scc_rfcr, SMC_EB);
out_8(&sup->scc_genscc.scc_tfcr, SMC_EB);
}

static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up)
static inline void cpm_set_smc_fcr(smc_uart_t __iomem *up)
{
out_8(&up->smc_rfcr, SMC_EB);
out_8(&up->smc_tfcr, SMC_EB);
Expand Down
6 changes: 3 additions & 3 deletions drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -117,8 +117,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
if (is_con) {
mem_addr = kzalloc(memsz, GFP_NOWAIT);
dma_addr = virt_to_bus(mem_addr);
}
else
} else
mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr,
GFP_KERNEL);

Expand Down Expand Up @@ -148,7 +147,8 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos *
pinfo->tx_fifosize), (void __force *)pinfo->mem_addr,
pinfo->tx_fifosize),
(void __force *)pinfo->mem_addr,
pinfo->dma_addr);

cpm_dpfree(pinfo->dp_addr);
Expand Down

0 comments on commit c413aa7

Please sign in to comment.