drivers: tty: serial: cpm_uart: fix styling issues

Fix checkpatch errors:

    ERROR: else should follow close brace '}'
    torvalds#121: FILE: drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c:121:
    +	}
    +	else

    WARNING: line over 80 characters
    torvalds#150: FILE: drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c:150:
    +					 pinfo->tx_fifosize), (void __force *)pinfo->mem_addr,

    WARNING: Block comments should align the * on each line
    torvalds#66: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:66:
    + * Check, if transmit buffers are processed
    +*/

    WARNING: braces {} are not necessary for any arm of this statement
    torvalds#170: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:170:
    +		if (IS_SMC(pinfo)) {
    [...]
    +		} else {
    [...]

    WARNING: labels should not be indented
    torvalds#292: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:292:
    +		      error_return:

    ERROR: code indent should use tabs where possible
    torvalds#299: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:299:
    +^I^I                        BD_SC_OV | BD_SC_ID);$

    WARNING: labels should not be indented
    torvalds#319: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:319:
    +      handle_error:

    WARNING: line over 80 characters
    torvalds#423: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:423:
    +		setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT));

    ERROR: space required before the open parenthesis '('
    torvalds#451: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:451:
    +		while(!cpm_uart_tx_empty(port)) {

    WARNING: Missing a blank line after declarations
    torvalds#462: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:462:
    +			smc_t __iomem *smcp = pinfo->smcp;
    +			clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);

    WARNING: line over 80 characters
    torvalds#466: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:466:
    +			clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);

    WARNING: Missing a blank line after declarations
    torvalds#466: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:466:
    +			scc_t __iomem *sccp = pinfo->sccp;
    +			clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);

    ERROR: code indent should use tabs where possible
    torvalds#484: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:484:
    +                                 struct ktermios *termios,$

    WARNING: please, no spaces at the start of a line
    torvalds#484: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:484:
    +                                 struct ktermios *termios,$

    ERROR: code indent should use tabs where possible
    torvalds#485: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:485:
    +                                 struct ktermios *old)$

    WARNING: please, no spaces at the start of a line
    torvalds#485: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:485:
    +                                 struct ktermios *old)$

    WARNING: line over 80 characters
    torvalds#624: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:624:
    +		/* Output in *one* operation, so we don't interrupt RX/TX if they

    WARNING: Block comments use a trailing */ on a separate line
    torvalds#625: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:625:
    +		 * were already enabled. */

    WARNING: line over 80 characters
    torvalds#629: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:629:
    +		out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize);

    WARNING: line over 80 characters
    torvalds#773: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:773:
    +	mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);

    ERROR: code indent should use tabs where possible
    torvalds#797: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:797:
    +^I         (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);$

    ERROR: code indent should use tabs where possible
    torvalds#799: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:799:
    +^I         (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);$

    ERROR: code indent should use tabs where possible
    torvalds#836: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:836:
    +^I         SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);$

    ERROR: code indent should use tabs where possible
    torvalds#859: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:859:
    +^I         (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);$

    ERROR: code indent should use tabs where possible
    torvalds#861: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:861:
    +^I         (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);$

    WARNING: space prohibited between function name and open parenthesis '('
    torvalds#866: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:866:
    +#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH)

    WARNING: line over 80 characters
    torvalds#921: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:921:
    +		clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);

    WARNING: Missing a blank line after declarations
    torvalds#462: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:462:
    +			smc_t __iomem *smcp = pinfo->smcp;
    +			clrbits16(&smcp->smc_smcmr,

    WARNING: Missing a blank line after declarations
    torvalds#467: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:467:
    +			scc_t __iomem *sccp = pinfo->sccp;
    +			clrbits32(&sccp->scc_gsmrl,

    ERROR: code indent should use tabs where possible
    #1151: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1151:
    +                              struct uart_cpm_port *pinfo)$

    WARNING: please, no spaces at the start of a line
    #1151: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1151:
    +                              struct uart_cpm_port *pinfo)$

    ERROR: "(foo*)" should be "(foo *)"
    #1161: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1161:
    +		struct clk *clk = clk_get(NULL, (const char*)data);

    WARNING: Missing a blank line after declarations
    #1162: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1162:
    +		struct clk *clk = clk_get(NULL, (const char*)data);
    +		if (!IS_ERR(clk))

    ERROR: code indent should use tabs where possible
    #1169: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1169:
    +^I^I^I                "fsl,cpm-brg property.\n", np);$

    ERROR: code indent should use tabs where possible
    #1178: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1178:
    +^I^I                "fsl,cpm-command property.\n", np);$

    ERROR: code indent should use tabs where possible
    #1192: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1192:

    WARNING: braces {} are not necessary for any arm of this statement
    #1279: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1279:
    +	if (unlikely(nolock)) {
    [...]
    +	} else {
    [...]

    WARNING: braces {} are not necessary for any arm of this statement
    #1287: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1287:
    +	if (unlikely(nolock)) {
    [...]
    +	} else {
    [...]

    WARNING: line over 80 characters
    #1354: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1354:
    +		clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);

    ERROR: Macros with complex values should be enclosed in parentheses
    #1394: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1394:
    +#define CPM_UART_CONSOLE	&cpm_scc_uart_console

    WARNING: Missing a blank line after declarations
    #1437: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1437:
    +	struct uart_cpm_port *pinfo = platform_get_drvdata(ofdev);
    +	return uart_remove_one_port(&cpm_reg, &pinfo->port);

    WARNING: please, no spaces at the start of a line
    #1464: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1464:
    + };$

    WARNING: Missing a blank line after declarations
    #1469: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1469:
    +	int ret = uart_register_driver(&cpm_reg);
    +	if (ret)

    WARNING: Missing a blank line after declarations
    torvalds#1062: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1062:
    +	int		i;
    +	volatile cbd_t	*bdp;

    ERROR: "foo * bar" should be "foo *bar"
    torvalds#19: FILE: drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h:19:
    +static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup)

    ERROR: "foo * bar" should be "foo *bar"
    torvalds#25: FILE: drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h:25:
    +static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up)

    WARNING: Improper SPDX comment style for 'drivers/tty/serial/cpm_uart/cpm_uart.h', please use '/*' instead
    #1: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:1:
    +// SPDX-License-Identifier: GPL-2.0

    WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
    #1: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:1:
    +// SPDX-License-Identifier: GPL-2.0

    WARNING: Block comments use * on subsequent lines
    torvalds#106: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:106:
    +/*
    +   virtual to phys transtalion

    ERROR: code indent should use tabs where possible
    torvalds#109: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:109:
    +                                         struct uart_cpm_port *pinfo)$

    WARNING: please, no spaces at the start of a line
    torvalds#109: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:109:
    +                                         struct uart_cpm_port *pinfo)$

    ERROR: code indent should use tabs where possible
    torvalds#125: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:125:
    +                                 struct uart_cpm_port *pinfo)$

    WARNING: please, no spaces at the start of a line
    torvalds#125: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:125:
    +                                 struct uart_cpm_port *pinfo)$

Signed-off-by: Enrico Weigelt <info@metux.net>

drivers/tty/serial/cpm_uart/cpm_uart.h

@@ -105,10 +105,10 @@ void scc3_lineif(struct uart_cpm_port *pinfo);
 void scc4_lineif(struct uart_cpm_port *pinfo);
 
 /*
-   virtual to phys transtalion
-*/
+ * virtual to phys transtalion
+ */
 static inline unsigned long cpu2cpm_addr(void *addr,
-                                         struct uart_cpm_port *pinfo)
+					 struct uart_cpm_port *pinfo)
 {
 	int offset;
 	u32 val = (u32)addr;
@@ -124,7 +124,7 @@ static inline unsigned long cpu2cpm_addr(void *addr,
 }
 
 static inline void *cpm2cpu_addr(unsigned long addr,
-                                 struct uart_cpm_port *pinfo)
+				 struct uart_cpm_port *pinfo)
 {
 	int offset;
 	u32 val = addr;

drivers/tty/serial/cpm_uart/cpm_uart_core.c

@@ -58,7 +58,7 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
 
 /*
  * Check, if transmit buffers are processed
-*/
+ */
 static unsigned int cpm_uart_tx_empty(struct uart_port *port)
 {
 	struct uart_cpm_port *pinfo =
@@ -162,11 +162,10 @@ static void cpm_uart_start_tx(struct uart_port *port)
 	}
 
 	if (cpm_uart_tx_pump(port) != 0) {
-		if (IS_SMC(pinfo)) {
+		if (IS_SMC(pinfo))
 			setbits8(&smcp->smc_smcm, SMCM_TX);
-		} else {
+		else
 			setbits16(&sccp->scc_sccm, UART_SCCM_TX);
-		}
 	}
 }
 
@@ -284,14 +283,14 @@ static void cpm_uart_int_rx(struct uart_port *port)
 				return;
 			}
 #endif
-		      error_return:
+error_return:
 			tty_insert_flip_char(tport, ch, flg);
 
 		}		/* End while (i--) */
 
 		/* This BD is ready to be used again. Clear status. get next */
 		clrbits16(&bdp->cbd_sc, BD_SC_BR | BD_SC_FR | BD_SC_PR |
-		                        BD_SC_OV | BD_SC_ID);
+					BD_SC_OV | BD_SC_ID);
 		setbits16(&bdp->cbd_sc, BD_SC_EMPTY);
 
 		if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
@@ -311,7 +310,7 @@ static void cpm_uart_int_rx(struct uart_port *port)
 
 	/* Error processing */
 
-      handle_error:
+handle_error:
 	/* Statistics */
 	if (status & BD_SC_BR)
 		port->icount.brk++;
@@ -422,7 +421,8 @@ static int cpm_uart_startup(struct uart_port *port)
 		setbits16(&pinfo->smcp->smc_smcmr, (SMCMR_REN | SMCMR_TEN));
 	} else {
 		setbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX);
-		setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT));
+		setbits32(&pinfo->sccp->scc_gsmrl,
+			  (SCC_GSMRL_ENR | SCC_GSMRL_ENT));
 	}
 
 	return 0;
@@ -450,7 +450,7 @@ static void cpm_uart_shutdown(struct uart_port *port)
 	/* If the port is not the console, disable Rx and Tx. */
 	if (!(pinfo->flags & FLAG_CONSOLE)) {
 		/* Wait for all the BDs marked sent */
-		while(!cpm_uart_tx_empty(port)) {
+		while (!cpm_uart_tx_empty(port)) {
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			schedule_timeout(2);
 		}
@@ -461,12 +461,17 @@ static void cpm_uart_shutdown(struct uart_port *port)
 		/* Stop uarts */
 		if (IS_SMC(pinfo)) {
 			smc_t __iomem *smcp = pinfo->smcp;
-			clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
+
+			clrbits16(&smcp->smc_smcmr,
+				  SMCMR_REN | SMCMR_TEN);
 			clrbits8(&smcp->smc_smcm, SMCM_RX | SMCM_TX);
 		} else {
 			scc_t __iomem *sccp = pinfo->sccp;
-			clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-			clrbits16(&sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
+
+			clrbits32(&sccp->scc_gsmrl,
+				  SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+			clrbits16(&sccp->scc_sccm,
+				  UART_SCCM_TX | UART_SCCM_RX);
 		}
 
 		/* Shut them really down and reinit buffer descriptors */
@@ -483,8 +488,8 @@ static void cpm_uart_shutdown(struct uart_port *port)
 }
 
 static void cpm_uart_set_termios(struct uart_port *port,
-                                 struct ktermios *termios,
-                                 struct ktermios *old)
+				 struct ktermios *termios,
+				 struct ktermios *old)
 {
 	int baud;
 	unsigned long flags;
@@ -621,12 +626,14 @@ static void cpm_uart_set_termios(struct uart_port *port,
 		 * present.
 		 */
 		prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN);
-		/* Output in *one* operation, so we don't interrupt RX/TX if they
-		 * were already enabled. */
+		/* Output in *one* operation, so we don't interrupt RX/TX if
+		 * they were already enabled.
+		 */
 		out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval |
 		    SMCMR_SM_UART | prev_mode);
 	} else {
-		out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize);
+		out_be16(&pinfo->sccup->scc_genscc.scc_mrblr,
+			 pinfo->rx_fifosize);
 		out_be16(&pinfo->sccup->scc_maxidl, maxidl);
 		out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
 	}
@@ -770,7 +777,8 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
 	 * buffers in the buffer descriptors, and the
 	 * virtual address for us to work with.
 	 */
-	mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
+	mem_addr = pinfo->mem_addr +
+		   L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
 	bdp = pinfo->tx_cur = pinfo->tx_bd_base;
 	for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
 		out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo));
@@ -794,9 +802,9 @@ static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
 
 	/* Store address */
 	out_be16(&pinfo->sccup->scc_genscc.scc_rbase,
-	         (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);
+		 (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);
 	out_be16(&pinfo->sccup->scc_genscc.scc_tbase,
-	         (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);
+		 (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);
 
 	/* Set up the uart parameters in the
 	 * parameter ram.
@@ -833,7 +841,7 @@ static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
 	 */
 	out_be32(&scp->scc_gsmrh, 0);
 	out_be32(&scp->scc_gsmrl,
-	         SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
+		 SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
 
 	/* Enable rx interrupts  and clear all pending events.  */
 	out_be16(&scp->scc_sccm, 0);
@@ -856,9 +864,9 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
 
 	/* Store address */
 	out_be16(&pinfo->smcup->smc_rbase,
-	         (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);
+		 (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);
 	out_be16(&pinfo->smcup->smc_tbase,
-	         (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);
+		 (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);
 
 /*
  *  In case SMC is being relocated...
@@ -913,8 +921,10 @@ static int cpm_uart_request_port(struct uart_port *port)
 		clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX);
 		clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
 	} else {
-		clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
-		clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+		clrbits16(&pinfo->sccp->scc_sccm,
+			  UART_SCCM_TX | UART_SCCM_RX);
+		clrbits32(&pinfo->sccp->scc_gsmrl,
+			  SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 	}
 
 	ret = cpm_uart_allocbuf(pinfo, 0);
@@ -1044,9 +1054,10 @@ static int poll_chars;
 static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo)
 {
 	u_char		c, *cp;
-	volatile cbd_t	*bdp;
 	int		i;
 
+	volatile cbd_t	*bdp;
+
 	/* Get the address of the host memory buffer.
 	 */
 	bdp = pinfo->rx_cur;
@@ -1134,7 +1145,7 @@ static const struct uart_ops cpm_uart_pops = {
 struct uart_cpm_port cpm_uart_ports[UART_NR];
 
 static int cpm_uart_init_port(struct device_node *np,
-                              struct uart_cpm_port *pinfo)
+			      struct uart_cpm_port *pinfo)
 {
 	const u32 *data;
 	void __iomem *mem, *pram;
@@ -1145,15 +1156,16 @@ static int cpm_uart_init_port(struct device_node *np,
 
 	data = of_get_property(np, "clock", NULL);
 	if (data) {
-		struct clk *clk = clk_get(NULL, (const char*)data);
+		struct clk *clk = clk_get(NULL, (const char *)data);
+
 		if (!IS_ERR(clk))
 			pinfo->clk = clk;
 	}
 	if (!pinfo->clk) {
 		data = of_get_property(np, "fsl,cpm-brg", &len);
 		if (!data || len != 4) {
 			dev_err(port->dev, "CPM UART %pOFn has no/invalid "
-			                "fsl,cpm-brg property.\n", np);
+					   "fsl,cpm-brg property.\n", np);
 			return -EINVAL;
 		}
 		pinfo->brg = *data;
@@ -1162,7 +1174,7 @@ static int cpm_uart_init_port(struct device_node *np,
 	data = of_get_property(np, "fsl,cpm-command", &len);
 	if (!data || len != 4) {
 		dev_err(port->dev, "CPM UART %pOFn has no/invalid "
-		                "fsl,cpm-command property.\n", np);
+				   "fsl,cpm-command property.\n", np);
 		return -EINVAL;
 	}
 	pinfo->command = *data;
@@ -1176,7 +1188,7 @@ static int cpm_uart_init_port(struct device_node *np,
 		pinfo->sccp = mem;
 		pinfo->sccup = pram = cpm_uart_map_pram(pinfo, np);
 	} else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") ||
-	           of_device_is_compatible(np, "fsl,cpm2-smc-uart")) {
+		   of_device_is_compatible(np, "fsl,cpm2-smc-uart")) {
 		pinfo->flags |= FLAG_SMC;
 		pinfo->smcp = mem;
 		pinfo->smcup = pram = cpm_uart_map_pram(pinfo, np);
@@ -1265,19 +1277,17 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 	unsigned long flags;
 	int nolock = oops_in_progress;
 
-	if (unlikely(nolock)) {
+	if (unlikely(nolock))
 		local_irq_save(flags);
-	} else {
+	else
 		spin_lock_irqsave(&pinfo->port.lock, flags);
-	}
 
 	cpm_uart_early_write(pinfo, s, count, true);
 
-	if (unlikely(nolock)) {
+	if (unlikely(nolock))
 		local_irq_restore(flags);
-	} else {
+	else
 		spin_unlock_irqrestore(&pinfo->port.lock, flags);
-	}
 }
 
 
@@ -1340,7 +1350,8 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 		out_be16(&pinfo->sccup->scc_brkcr, 0);
 		cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX);
 		clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
-		clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+		clrbits32(&pinfo->sccp->scc_gsmrl,
+			  SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 	}
 
 	ret = cpm_uart_allocbuf(pinfo, 1);
@@ -1381,7 +1392,7 @@ static int __init cpm_uart_console_init(void)
 
 console_initcall(cpm_uart_console_init);
 
-#define CPM_UART_CONSOLE	&cpm_scc_uart_console
+#define CPM_UART_CONSOLE	(&cpm_scc_uart_console)
 #else
 #define CPM_UART_CONSOLE	NULL
 #endif
@@ -1424,6 +1435,7 @@ static int cpm_uart_probe(struct platform_device *ofdev)
 static int cpm_uart_remove(struct platform_device *ofdev)
 {
 	struct uart_cpm_port *pinfo = platform_get_drvdata(ofdev);
+
 	return uart_remove_one_port(&cpm_reg, &pinfo->port);
 }
 
@@ -1451,11 +1463,12 @@ static struct platform_driver cpm_uart_driver = {
 	},
 	.probe = cpm_uart_probe,
 	.remove = cpm_uart_remove,
- };
+};
 
 static int __init cpm_uart_init(void)
 {
 	int ret = uart_register_driver(&cpm_reg);
+
 	if (ret)
 		return ret;
 

drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h

@@ -16,13 +16,13 @@ static inline void cpm_set_brg(int brg, int baud)
 	cpm_setbrg(brg, baud);
 }
 
-static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup)
+static inline void cpm_set_scc_fcr(scc_uart_t __iomem *sup)
 {
 	out_8(&sup->scc_genscc.scc_rfcr, SMC_EB);
 	out_8(&sup->scc_genscc.scc_tfcr, SMC_EB);
 }
 
-static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up)
+static inline void cpm_set_smc_fcr(smc_uart_t __iomem *up)
 {
 	out_8(&up->smc_rfcr, SMC_EB);
 	out_8(&up->smc_tfcr, SMC_EB);

drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c

@@ -117,8 +117,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 	if (is_con) {
 		mem_addr = kzalloc(memsz, GFP_NOWAIT);
 		dma_addr = virt_to_bus(mem_addr);
-	}
-	else
+	} else
 		mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr,
 					      GFP_KERNEL);
 
@@ -148,7 +147,8 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 	dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
 							  pinfo->rx_fifosize) +
 			  L1_CACHE_ALIGN(pinfo->tx_nrfifos *
-					 pinfo->tx_fifosize), (void __force *)pinfo->mem_addr,
+					 pinfo->tx_fifosize),
+			  (void __force *)pinfo->mem_addr,
 			  pinfo->dma_addr);
 
 	cpm_dpfree(pinfo->dp_addr);