Professional Firmware - Austral Spring version 20221002

- Shortcut option for turning off the backlight in toolbar
- Filament run-out sensor enable/disable in tune menu
- Enhanced Host printing support
- Better C10 support
- Axis value in dash board shows actual position of the axes, including Z leveling
- Raise Z to Probe Clearance position before of a Probing Z Reference
- New ProUI Info box
- Fix mriscoc#344
- Fix mesh slot load message bug
- Enable support for Creality Slicer G-code file with embedded thumbnail for Ender3V2 Neo
- Implements a user option for center the menu title by defining TITLE_CENTERED in configuration files
- Force drawing of Z-axis value on screen redrawing
- Automatically reboot to apply default settings on first boot after flash.
- Code optimization

From last Marlin bugfix 2.1.x
- Emergency Parse M524 (#24761)
- Fix inverse_accel redefine
- Minor planner optimization (#24737)
- UBL G28 leveling fix (#24622)
- Fix / refactor shared PID (#24673)
- Report M22 / M23 success / fail (#24706)
- Constrain UBL within mesh bounds (#24631)
- Other general fixes

.editorconfig

@@ -14,6 +14,10 @@ end_of_line = lf
 indent_style = space
 indent_size = 2
 
-[{*.py,*.conf,*.sublime-project}]
+[{*.py}]
+indent_style = space
+indent_size = 4
+
+[{*.conf,*.sublime-project}]
 indent_style = tab
 indent_size = 4

.github/contributing.md

@@ -34,8 +34,11 @@ This project and everyone participating in it is governed by the [Marlin Code of
 
 We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions.
 
-* [Marlin RepRap forum](https://reprap.org/forum/list.php?415)
-* [MarlinFirmware on Facebook](https://www.facebook.com/groups/1049718498464482/)
+- [Marlin Documentation](https://marlinfw.org) - Official Marlin documentation
+- Facebook Group ["Marlin Firmware"](https://www.facebook.com/groups/1049718498464482/)
+- RepRap.org [Marlin Forum](https://forums.reprap.org/list.php?415)
+- Facebook Group ["Marlin Firmware for 3D Printers"](https://www.facebook.com/groups/3Dtechtalk/)
+- [Marlin Configuration](https://www.youtube.com/results?search_query=marlin+configuration) on YouTube
 
 If chat is more your speed, you can join the MarlinFirmware Discord server:
 
@@ -50,13 +53,13 @@ If chat is more your speed, you can join the MarlinFirmware Discord server:
 
 This section guides you through submitting a Bug Report for Marlin. Following these guidelines helps maintainers and the community understand your report, reproduce the behavior, and find related reports.
 
-Before creating a Bug Report, please test the "nightly" development branch, as you might find out that you don't need to create one. When you are creating a Bug Report, please [include as many details as possible](#how-do-i-submit-a-good-bug-report). Fill out [the required template](issue_template.md), the information it asks for helps us resolve issues faster.
+Before creating a Bug Report, please test the "nightly" development branch, as you might find out that you don't need to create one. When you are creating a Bug Report, please [include as many details as possible](#how-do-i-submit-a-good-bug-report). Fill out [the required template](ISSUE_TEMPLATE/bug_report.yml), the information it asks for helps us resolve issues faster.
 
 > **Note:** Regressions can happen. If you find a **Closed** issue that seems like your issue, go ahead and open a new issue and include a link to the original issue in the body of your new one. All you need to create a link is the issue number, preceded by #. For example, #8888.
 
 #### How Do I Submit A (Good) Bug Report?
 
-Bugs are tracked as [GitHub issues](https://guides.github.com/features/issues/). Use the New Issue button to create an issue and provide the following information by filling in [the template](issue_template.md).
+Bugs are tracked as [GitHub issues](https://guides.github.com/features/issues/). Use the New Issue button to create an issue and provide the following information by filling in [the template](ISSUE_TEMPLATE/bug_report.yml).
 
 Explain the problem and include additional details to help maintainers reproduce the problem:
 
@@ -88,12 +91,12 @@ Include details about your configuration and environment:
 
 This section guides you through submitting a suggestion for Marlin, including completely new features and minor improvements to existing functionality. Following these guidelines helps maintainers and the community understand your suggestion and find related suggestions.
 
-Before creating a suggestion, please check [this list](#before-submitting-a-suggestion) as you might find out that you don't need to create one. When you are creating an enhancement suggestion, please [include as many details as possible](#how-do-i-submit-a-good-enhancement-suggestion). Fill in [the template](issue_template.md), including the steps that you imagine you would take if the feature you're requesting existed.
+Before creating a suggestion, please check [this list](https://github.com/MarlinFirmware/Marlin/issues?q=is%3Aopen+is%3Aissue+label%3A%22T%3A+Feature+Request%22) as you might find out that you don't need to create one. When you are creating an enhancement suggestion, please [include as many details as possible](#how-do-i-submit-a-good-feature-request). Fill in [the template](ISSUE_TEMPLATE/feature_request.yml), including the steps that you imagine you would take if the feature you're requesting existed.
 
 #### Before Submitting a Feature Request
 
 * **Check the [Marlin website](https://marlinfw.org/)** for tips — you might discover that the feature is already included. Most importantly, check if you're using [the latest version of Marlin](https://github.com/MarlinFirmware/Marlin/releases) and if you can get the desired behavior by changing [Marlin's config settings](https://marlinfw.org/docs/configuration/configuration.html).
-* **Perform a [cursory search](https://github.com/MarlinFirmware/Marlin/issues?q=is%3Aissue)** to see if the enhancement has already been suggested. If it has, add a comment to the existing issue instead of opening a new one.
+* **Perform a [cursory search](https://github.com/MarlinFirmware/Marlin/issues?q=is%3Aopen+is%3Aissue+label%3A%22T%3A+Feature+Request%22)** to see if the enhancement has already been suggested. If it has, add a comment to the existing issue instead of opening a new one.
 
 #### How Do I Submit A (Good) Feature Request?
 
@@ -116,7 +119,7 @@ Unsure where to begin contributing to Marlin? You can start by looking through t
 
 ### Pull Requests
 
-Pull Requests should always be targeted to working branches (e.g., `bugfix-1.1.x` and/or `bugfix-2.0.x`) and never to release branches (e.g., `1.1.x`). If this is your first Pull Request, please read our [Guide to Pull Requests](https://marlinfw.org/docs/development/getting_started_pull_requests.html) and Github's [Pull Request](https://help.github.com/articles/creating-a-pull-request/) documentation.
+Pull Requests should always be targeted to working branches (e.g., `bugfix-2.1.x` and/or `bugfix-1.1.x`) and never to release branches (e.g., `2.0.x` and/or `1.1.x`). If this is your first Pull Request, please read our [Guide to Pull Requests](https://marlinfw.org/docs/development/getting_started_pull_requests.html) and Github's [Pull Request](https://help.github.com/articles/creating-a-pull-request/) documentation.
 
 * Fill in [the required template](pull_request_template.md).
 * Don't include issue numbers in the PR title.

.github/pull_request_template.md

@@ -1,23 +1,33 @@
-### Requirements
+<!--
+
+Submitting a Pull Request
+
+- Please fill out all sections of this form. You can delete the helpful comments.
+- Pull Requests without clear information will take longer and may even be rejected.
+- We get a high volume of submissions so please be patient during review.
 
-* Filling out this template is required. Pull Requests without a clear description may be closed at the maintainers' discretion.
+-->
 
 ### Description
 
 <!--
 
-We must be able to understand your proposed change from this description. If we can't understand what the code will do from this description, the Pull Request may be closed at the maintainers' discretion. Keep in mind that the maintainer reviewing this PR may not be familiar with or have worked with the code recently, so please walk us through the concepts.
+Clearly describe the submitted changes with lots of details. Include images where helpful. Initial reviewers may not be familiar with the subject, so be as thorough as possible. You can use MarkDown syntax to improve readability with bullet lists, code blocks, and so on. PREVIEW and fix up formatting before submitting.
 
 -->
 
+### Requirements
+
+<!-- Does this PR require a specific board, LCD, etc.? -->
+
 ### Benefits
 
-<!-- What does this fix or improve? -->
+<!-- What does this PR fix or improve? -->
 
 ### Configurations
 
-<!-- Attach any Configuration.h, Configuration_adv.h, or platformio.ini files needed to compile/test your Pull Request. -->
+<!-- Attach Configurations ZIP and any other files needed to test this PR. -->
 
 ### Related Issues
 
-<!-- Whether this fixes a bug or fulfills a feature request, please list any related Issues here. -->
+<!-- Does this PR fix a bug or fulfill a Feature Request? Link related Issues here. -->

.github/workflows/check-pr.yml

@@ -31,4 +31,4 @@ jobs:
 
           It may help to set your fork's default branch to `bugfix-2.0.x`.
 
-          See [this page](http://marlinfw.org/docs/development/getting_started_pull_requests.html) for full instructions.
+          See [this page](https://marlinfw.org/docs/development/getting_started_pull_requests.html) for full instructions.

.github/workflows/test-builds.yml

@@ -8,15 +8,15 @@ name: CI
 on:
   pull_request:
     branches:
-    - bugfix-2.0.x
+    - bugfix-2.1.x
     paths-ignore:
     - config/**
     - data/**
     - docs/**
     - '**/*.md'
   push:
     branches:
-    - bugfix-2.0.x
+    - bugfix-2.1.x
     paths-ignore:
     - config/**
     - data/**
@@ -45,6 +45,7 @@ jobs:
         - teensy35
         - teensy41
         - SAMD51_grandcentral_m4
+        - PANDA_PI_V29
 
         # Extended AVR Environments
 
@@ -59,13 +60,13 @@ jobs:
         #- STM32F103RC_btt_maple
         - STM32F103RC_btt_USB_maple
         - STM32F103RC_fysetc_maple
-        - STM32F103RC_meeb
+        - STM32F103RC_meeb_maple
         - jgaurora_a5s_a1_maple
         - STM32F103VE_longer_maple
         #- mks_robin_maple
         - mks_robin_lite_maple
         - mks_robin_pro_maple
-        #- mks_robin_nano35_maple
+        #- mks_robin_nano_v1v2_maple
         #- STM32F103RE_creality_maple
         - STM32F103VE_ZM3E4V2_USB_maple
 
@@ -76,9 +77,9 @@ jobs:
         - STM32F103RE_btt
         - STM32F103RE_btt_USB
         - STM32F103RE_creality
+        - STM32F401RC_creality
         - STM32F103VE_longer
         - STM32F407VE_black
-        - STM32F401VE_STEVAL
         - BIGTREE_BTT002
         - BIGTREE_SKR_PRO
         - BIGTREE_GTR_V1_0
@@ -92,12 +93,17 @@ jobs:
         - rumba32
         - LERDGEX
         - LERDGEK
-        - mks_robin_nano35
+        - mks_robin_nano_v1v2
+        #- mks_robin_nano_v1v2_usbmod
+        #- mks_robin_nano_v1_3_f4_usbmod
         - NUCLEO_F767ZI
         - REMRAM_V1
         - BTT_SKR_SE_BX
         - chitu_f103
-        - Index_Mobo_Rev03
+        - Opulo_Lumen_REV3
+
+        # ESP32 environments
+        - mks_tinybee
 
         # Put lengthy tests last
 
@@ -113,32 +119,33 @@ jobs:
     steps:
 
     - name: Check out the PR
-      uses: actions/checkout@v2
+      uses: actions/checkout@v3
 
     - name: Cache pip
-      uses: actions/cache@v2
+      uses: actions/cache@v3
       with:
         path: ~/.cache/pip
         key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
         restore-keys: |
           ${{ runner.os }}-pip-
 
     - name: Cache PlatformIO
-      uses: actions/cache@v2
+      uses: actions/cache@v3
       with:
         path: ~/.platformio
         key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
 
     - name: Select Python 3.7
-      uses: actions/setup-python@v2
+      uses: actions/setup-python@v3
       with:
         python-version: '3.7' # Version range or exact version of a Python version to use, using semvers version range syntax.
         architecture: 'x64' # optional x64 or x86. Defaults to x64 if not specified
 
     - name: Install PlatformIO
       run: |
-        pip install -U https://github.com/platformio/platformio-core/archive/develop.zip
-        platformio update
+        pip install -U platformio
+        pio upgrade --dev
+        pio pkg update --global
 
     - name: Run ${{ matrix.test-platform }} Tests
       run: |