RFlow

RFlow is a Ruby framework inspired by flow-based programming (FBP), which was previously inspired by Communicating Sequential Processes (CSP). It has some conceptual similarities to Javascript's NoFlo system, Java's Storm, and Clojure's core.async library.

In short, components communicate with each other by sending/receiving messages via their output/input ports over connections. Ports are "wired" together output->input with connections, and messages are explicitly serialized before being sent over the connection. RFlow supports generalized connection types and message serialization, however only two are in current use, namely ZeroMQ connections and Avro serialization.

RFlow currently runs as a single-threaded, evented system on top of Eventmachine, meaning that any code should be coded in an asynchronous style so as to not block the Eventmachine reactor (and thus block all the other components). There is currently work being done to "shard" the workflow among multiple processes and/or threads.

Some of the long-term goals of RFlow are to allow for components and portions of the workflow to be defined in any language that supports Avro and ZeroMQ, which a numerous.

Definitions

• Component - the basic unit of RFlow computation. Each component is a shared-nothing, individual computation module that communicates with the rest of the system through explicit message passing via input and output ports.

• Port - a named entity on each component that is responsible for receiving data (and input port) or sending data (and output port). Ports can be "keyed" or "indexed" to allow better multiplexing of messages out/in a single port, as well as allow a single port to be accessed by an array.

• Connection - a directed link between an output port and an input port. RFlow supports generalized connection types, however only ZeroMQ IPC links are currently used.

• Message - a bit of serialized data that is sent out an output port and recieved on an input port. Due to the serialization, message types and schemas are explicitly defined. In a departure from "pure" FBP, RFlow supports sending multiple message types via a single connection.

• Workflow - the common name for the digraph created when the components (nodes) are wired together via connections to their respective output/input ports.

Component Examples

The following describes the API of an RFlow component:

class SimpleComponent < RFlow::Component
  input_port :in
  output_port :out

  def configure!(config); end
  def run!; end
  def process_message(input_port, input_port_key, connection, message); end
  def shutdown!; end
  def cleanup!; end
end

• input_port and output_port define the named ports that will receive data or send data, respectively. These class methods create accessors for their respective port names, to be used later in the process_message or run! methods. There can be multiple (or no) input and output ports.

• configure! (called with a hash configuration) is called after the component is instantiated but before the workflow has been wired or any messages have been sent. Note that this is called outside the Eventmachine reactor.

• run! is called after all the components have been wired together with connections and the entire workflow has been created. For a component that is a source of messages, this is where messages will be sent. For example, if the component is reading from a file, this is where the file will be opened, the contents read into a message, and the message sent out the output port. run! is called within the Eventmachine reactor.

• process_message is an evented callback that is called whenever the component receives a message on one of its input ports. process_message is called withing the Eventmachine reactor

• shutdown! is called when the flow is being terminated, and is meant to allow the components to do penultimate processing and send any final messages. All components in a flow will be told to shutdown! before they are told to cleanup!.

• cleanup! is the final call to each component, and allow the component to clean up any external resources that it might have outstanding, such as file handles or network sockets.

"Source" components will often do all of their work within the run! method, and often gather message data from an external source, such as file, database, or network socket. The following component generates a set of integers between a configured start/finish, incrementing by a configured step:

class RFlow::Components::GenerateIntegerSequence < RFlow::Component
  output_port :out

  def configure!(config)
    @start = config['start'].to_i
    @finish = config['finish'].to_i
    @step = config['step'] ? config['step'].to_i : 1
    # If interval seconds is not given, it will default to 0
    @interval_seconds = config['interval_seconds'].to_i
  end

  # Note that this uses the timer (sometimes with 0 interval) so as
  # not to block the reactor
  def run!
    timer = EM::PeriodicTimer.new(@interval_seconds) do
      message = RFlow::Message.new('RFlow::Message::Data::Integer')
      message.data.data_object = @start
      out.send_message message
      @start += @step
      timer.cancel if @start > @finish
    end
  end
end

"Middle" components receive messages on input port(s), perform a bit of computation, and then send a message out the output port(s). The following component accepts a Ruby expression string via its config, and then uses that as an expression to determine what port to send an incoming message:

class RFlow::Components::RubyProcFilter < RFlow::Component
  input_port :in
  output_port :filtered
  output_port :dropped
  output_port :errored

  def configure!(config)
    @filter_proc = eval("lambda {|message| #{config['filter_proc_string']} }")
  end

  def process_message(input_port, input_port_key, connection, message)
    begin
      if @filter_proc.call(message)
        filtered.send_message message
      else
        dropped.send_message message
      end
    rescue Exception => e
      errored.send_message message
    end
  end
end

"Sink" components accept messages on an input port and do not have an output port. They often operate on external sinks, such as writing messages to a file, database, or network socket. The following component writes the inspected message to a file (defined via the configuration):

class RFlow::Components::FileOutput < RFlow::Component
  input_port :in

  attr_accessor :output_file_path, :output_file

  def configure!(config)
    self.output_file_path = config['output_file_path']
    self.output_file = File.new output_file_path, 'w+'
  end

  def process_message(input_port, input_port_key, connection, message)
    output_file.puts message.data.data_object.inspect
    output_file.flush
  end

  def cleanup
    output_file.close
  end
end

RFlow Messages

RFlow messages are instances of RFlow::Message, which are ultimately serialized via an Avro schema.

There are two parts of the message "envelope": a provenance and the embedded data object "payload".

The provenance is a way for a component to annotate a message with a bit of data that should (by convention) be carried through the workflow with the message, as well as being copied to derived messages. For example, a TCP server component would spin up a TCP server and, upon recieving a connection and packets on a session, it would marshal the packets into RFlow::Messsages and send them out its output ports. Messages received on its input port, however, need to have a way to be matched to the corresponding underlying TCP connection. provenance provides a method for the TCP server component to add a bit of metadata (namely an identifier for the TCP connection) such that later messages that contain the same provenance can be matched to the correct underlying TCP connection.

The other parts of the message envelope are related to the embedded data object. In addition to the data object itself (which is encoded with a specific Avro schema), there are a few fields that describe the embedded data, namely the data_type_name, the data_serialization_type, and the data_schema. By including all this metadata in each message, the system is completely dynamic and allow for multiple message types to be included on a single connection, as well as enabling non-RFlow components to be created in any language. This does come at the expense of larger messages which results in greater message overhead.

For example, if we have a simple integer data type that we would like to serialize via Avro, we can register the schema with the following add_available_data_type code shown below:

long_integer_schema = '{"type": "long"}'
RFlow::Configuration.add_available_data_type('RFlow::Message::Data::Integer', 'avro', long_integer_schema)

This will make the schema and message type available to RFlow, such that it will be able to create a new message with:

message = RFlow::Message.new('RFlow::Message::Data::Integer')

and will automatically reconstitute a message from the connection and call a component's process_message.

The deserialized Avro Ruby object is available as the data_object accessor on the data class, i.e.:

message.data.data_object = 1024

The data_object is the deserialized Avro Ruby object and, as such, allows the Avro object to be accessed as a Ruby object. In order to provide a more convenient interface to the underlying Avro object, RFlow allows modules to be dynamically mixed in to the data class object.

For example, the module below provides a bit of extra functionality to the above-mentioned RFlow::Message::Data::Integer message type, namely to default the integer to 0 upon being mixed in, provide a better named accessor, and add a default? method to the data object:

module SimpleDataExtension
  def self.extended(base_data)
    base_data.data_object = 0
  end

  def int; data_object; end
  def int=(new_int); data_object = new_int; end

  def default?;
    data_object == 0
  end
end

Once a module is defined, it needs to be registered to the appropriate message data type. Note that multiple modules can be registered for a given message data type.

RFlow::Configuration.add_available_data_extension('RFlow::Message::Data::Integer', SimpleDataExtension)

The result of this is that the following code will work:

message = RFlow::Message.new('RFlow::Message::Data::Integer')
message.data.int == 0   # => true
message.data.default?   # => true
message.data.int = 1024
messaga.data.default?   # => false

RFlow Workflow Configuration

RFlow currently stores its configuration in a SQLite database which are internally accessed via ActiveRecord. Given that SQLite is a rather simple and standard interface, non-RFlow components could access it and determine their respsective ZMQ connections.

DB schemas for the configuration database are in lib/rflow/configuration/migrations and define the complete workflow configuration. Note that each of the tables uses a UUID primary key, and UUIDs are used within RFlow to identify specific components.

• settings - general application settings, such as log levels, app names, directories, etc

• components - a list of the components including its name, specification (Ruby class), and options. Note that the options are serialized to the database as YAML, and components should understand that the round-trip through the database might not be perfect (e.g. Ruby symbols might become strings). A component also has a number of input ports and output ports.

• ports - belonging to a component (via component_uuid foreign key), also has a type colum for ActiveRecord STI, which gets set to either a RFlow::Configuration::InputPort or RFlow::Configuration::OutputPort.

• connections - a connection between two ports via foriegn keys input_port_uuid and output_port_uuid. Like ports, connections are typed via AR STI (RFlow::Configuration::ZMQConnection or RFlow::Configuration::AMQPConnection) and have a YAML serialized options hash. A connection also (potentially) defines the port keys.

RFlow also provides a RubyDSL for configuration-like file to be used to load the database:

RFlow::Configuration::RubyDSL.configure do |config|
  # Configure the settings, which include paths for various files, log
  # levels, and component specific stuffs
  config.setting('rflow.log_level', 'DEBUG')
  config.setting('rflow.application_directory_path', '../tmp')

  config.setting('rflow.application_name', 'testapp')

  # Instantiate components
  config.component 'generate_ints1', 'RFlow::Components::GenerateIntegerSequence', {
    'start' => 0,
    'finish' => 10,
    'step' => 3,
    'interval_seconds' => 1
  }
  config.component 'generate_ints2', 'RFlow::Components::GenerateIntegerSequence', {
    'start' => 20,
    'finish' => 30
  }
  config.component 'filter', 'RFlow::Components::RubyProcFilter', {
    'filter_proc_string' => 'lambda {|message| true}'
  }
  config.component 'output1', 'RFlow::Components::FileOutput', {
    'output_file_path' => '/tmp/out1'
  }
  config.component 'output2', 'RFlow::Components::FileOutput', {
    'output_file_path' => '/tmp/out2'
  }

  # Wire components together
  config.connect 'generate_ints1#out' => 'filter#in'
  config.connect 'generate_ints2#out' => 'filter#in'
  config.connect 'filter#filtered' => 'replicate#in'
  config.connect 'filter#out' => 'output1#in'
  config.connect 'filter#filtered' => 'output2#in'
end

Command-Line Operation

RFlow includes the rflow binary that can load a database from a Ruby DSL, as well as start/stop the wokflow application as a daemon. Invoking the rflow binary without any options will give a brief help:

Usage: rflow [options] (start|stop|status|load)
    -d, --database DB                Config database (sqlite) path (GENERALLY REQUIRED)
    -c, --config CONFIG              Config file path (only valid for load)
    -e, --extensions FILE1[,FILE_N]  Extension file paths (will load)
    -g, --gems GEM1[,GEM_N]          Extension gems (will require)
    -l, --log LOGFILE                Initial startup log file (in addition to stdout)
    -v, --verbose [LEVEL]            Control the startup log (and stdout) verbosity (DEBUG, INFO, WARN) defaults to INFO
    -f                               Run in the foreground
        --version                    Show RFlow version and exit
    -h, --help                       Show this message and exit

In general, the process for getting started is to first create a configuration database via rflow load:

rflow load -d my_config.sqlite -c my_ruby_dsl.rb

which will create the my_config.sqlite configuration database loaded with the my_ruby_dsl.rb configuration DSL.

Once a config database exists, you can start up the application that it describes with rflow start. The --extensions argument allows loading of arbitrary Ruby code (via Ruby's load), which is usually where the component implementations are stored, as well as data type registrations.

rflow start -d my_config.sqlite -e my_component.rb,my_other_component.rb,my_data_type.rb

By default, RFlow will daemonize, write its pid file to ./run/app.pid and write its log file to ./log/app.log. The -f flag will keep RFlow in the foreground.

RFlow also supports two signals that allow for useful management of a running RFlow daemon's log. Sending a SIGUSR1 to the running RFlow process will cause RFlow to close and reopen its log file, which allows for easy log management without restarting RFlow. In addition, sending a SIGUSR2 will toggle RFlow's log-level to DEBUG, and a subsequent SIGUSR2 will toggle the log-level back to what was originally set. This allows for easy debugging of a running RFlow process.

Copyright 2014 RedJack LLC

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

   http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.