Merge test into next #1

mpe · 2015-02-06T00:47:52Z

No description provided.

Fix this: CC arch/powerpc/sysdev/fsl_pci.o arch/powerpc/sysdev/fsl_pci.c: In function 'fsl_pcie_check_link': arch/powerpc/sysdev/fsl_pci.c:91:1: error: the frame size of 1360 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] when configuring FRAME_WARN, by refactoring indirect_read_config() to take hose and bus number instead of the 1344-byte struct pci_bus. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

Probably we should have not upstreamed this in the first place Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

They seem to be leftovers from '14cf11a powerpc: Merge enough to start building in arch/powerpc' Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

PMCs on PowerPC increases towards 0x80000000 and triggers an overflow interrupt when the msb is set to collect a sample. Therefore, to setup for the next sample collection, pmu_start should set the pmc value to 0x80000000 - left instead of left which incorrectly delays the next overflow interrupt. Same as commit 9a45a94 ("powerpc/perf: power_pmu_start restores incorrect values, breaking frequency events") for book3s. Signed-off-by: Tom Huynh <tom.huynh@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

Some powerpc like the 8xx don't have a RW bit in PTE bits but a RO (Read Only) bit. This patch implements the handling of a _PAGE_RO flag to be used in place of _PAGE_RW Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [scottwood@freescale.com: fix whitespace] Signed-off-by: Scott Wood <scottwood@freescale.com>

On powerpc 8xx, in TLB entries, 0x400 bit is set to 1 for read-only pages and is set to 0 for RW pages. So we should use _PAGE_RO instead of _PAGE_RW Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>

This binding is for FMan MDIO, it covers FMan v2 & FMan v3. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> [scottwood@freescale.com: mark interrupts required only for external] Signed-off-by: Scott Wood <scottwood@freescale.com>

For nohash powerpc, when we run out of contexts, contexts are freed by stealing used contexts in-turn. When a victim has been selected, the associated TLB entries are freed using _tlbil_pid(). Unfortunatly, on the PPC 8xx, _tlbil_pid() does a tlbia, hence flushes ALL TLB entries and not only the one linked to the stolen context. Therefore, as implented today, at each task switch requiring a new context, all entries are flushed. This patch modifies the implementation so that when running out of contexts, all contexts get freed at once, hence dividing the number of calls to tlbia by 16. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>

Since commit 33fb845 ("powerpc/8xx: Don't use MD_TWC for walk"), MD_EPN and MD_TWC are not writen anymore in FixupDAR so saving r3 has become useless. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>

Kernel MMU handling code handles validity of entries via _PMD_PRESENT which corresponds to V bit in MD_TWC and MI_TWC. When the V bit is not set, MPC8xx triggers TLBError exception. So we don't have to check that and branch ourself to TLBError. We can set TLB entries with non present entries, remove all those tests and let the 8xx handle it. This reduce the number of cycle when the entries are valid which is the case most of the time, and doesn't significantly increase the time for handling invalid entries. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>

When pages are not 4K, PGDIR table is allocated with kmalloc(). In order to optimise TLB handlers, aligned memory is needed. kmalloc() doesn't provide aligned memory blocks, so lets use a kmem_cache pool instead. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>

L1 base address is now aligned so we can insert L1 index into r11 directly and then preserve r10 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>

All accessed to PGD entries are done via 0(r11). By using lower part of swapper_pg_dir as load index to r11, we can remove the ori instruction. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>

Signed-off-by: Esben Haabendal <eha@deif.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

Also, enable Vitesse PHY and fixed PHY support. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

Commit 746c9e9 "of/base: Fix PowerPC address parsing hack" limited the applicability of the workaround whereby a missing ranges is treated as an empty ranges. This workaround was hiding a bug in the etsec2 device tree nodes, which have children with reg, but did not have ranges. Signed-off-by: Scott Wood <scottwood@freescale.com> Reported-by: Alexander Graf <agraf@suse.de>

Add support for the Artesyn MVME2500 Single Board Computer. The MVME2500 is a 6U form factor VME64 computer with: - A single Freescale QorIQ P2010 CPU - 1 GB of DDR3 onboard memory - Three Gigabit Ethernets - Five 16550 compatible UARTS - One USB 2.0 port, one SHDC socket and one SATA connector - One PCI/PCI eXpress Mezzanine Card (PMC/XMC) Slot - MultiProcessor Interrupt Controller (MPIC) - A DS1375T Real Time Clock (RTC) and 512 KB of Non-Volatile Memory - Two 64 KB EEPROMs - U-Boot in 16 SPI Flash This patch is based on linux-3.18 and has been boot tested. Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <scottwood@freescale.com>

T1040 has a different version of corenet-cf, despite being incorrectly labelled with a fsl,corenet2-cf compatible. The t1040 version of corenet-cf has a version register that can be read to distinguish. The t4240/b4860 version officially does not, but testing shows that it does and has a different value, so use that. If somehow this ends up not being reliable and we treat a t4240/b4860 as a t1040 (the reverse should not happen, as t1040's version register is official), currently the worst that should happen is writing to reserved bits to enable events that don't exist. The changes to the t1040 version of corenet-cf that this driver cares about are the addition of two new error events. There are also changes to the format of cecar2, which is printed, but not interpreted, by this driver. Signed-off-by: Scott Wood <scottwood@freescale.com>

'ranges' are specified as <base size> not as <start end> Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

This supports SoC(s) with multiple B/QMan instances Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Geoff Thorpe <Geoff.Thorpe@freescale.com> Signed-off-by: Hai-Ying Wang <Haiying.Wang@freescale.com> [Emil Medve: Sync with the upstream binding] Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

Change-Id: I16e63db731e55a3d60d4e147573c1af8718082d3 Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Geoff Thorpe <Geoff.Thorpe@freescale.com> Signed-off-by: Hai-Ying Wang <Haiying.Wang@freescale.com> [Emil Medve: Sync with the upstream binding] Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

Fix the GPIO address in the device tree to match the documented location. Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <scottwood@freescale.com>

…ll "of_node_put" The of_node_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Scott Wood <scottwood@freescale.com>

Replace strcpy and strncpy with strlcpy to avoid strings that are too big, or lack null termination. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> [scottwood@freescale.com: cleaned up commit message] Signed-off-by: Scott Wood <scottwood@freescale.com>

When adding an event to the PMU with PERF_EF_START the STOPPED and UPTODATE flags need to be cleared in the hw.event status variable because they are preventing the update of the event count on overflow interrupt. Signed-off-by: Alexandru-Cezar Sardan <alexandru.sardan@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

These defconfigs contain the CONFIG_M25P80 symbol, which is now dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy the new dependency. At the same time, drop the now-nonexistent CONFIG_MTD_CHAR symbol. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Scott Wood <scottwood@freescale.com>

MMU_NO_CONTEXT is conditionally defined as 0 or (unsigned int)-1. However, in __flush_tlb_page() a corresponding variable is only tested for open coded 0, which can cause NULL pointer dereference if `mm' argument was legitimately passed as such. Bail out early in case the first argument is NULL, thus eliminate confusion between different values of MMU_NO_CONTEXT and avoid disabling and then re-enabling preemption unnecessarily. Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: Scott Wood <scottwood@freescale.com>

…scottwood/linux into next Freescale updates from Scott: "Highlights include 8xx optimizations, some more work on datapath device tree content, e300 machine check support, t1040 corenet error reporting, and various cleanups and fixes."

There is a panic in socket ioctl cmd SIOCGSKNS when NET_NS is not enabled. The reason is that nsfs tries to access ns->ops but the proc_ns_operations is not implemented in this case. [7.670023] Unable to handle kernel NULL pointer dereference at virtual address 00000010 [7.670268] pgd = 32b54000 [7.670544] [00000010] *pgd=00000000 [7.671861] Internal error: Oops: 5 [#1] SMP ARM [7.672315] Modules linked in: [7.672918] CPU: 0 PID: 1 Comm: systemd Not tainted 5.13.0-rc3-00375-g6799d4f2da49 torvalds#16 [7.673309] Hardware name: Generic DT based system [7.673642] PC is at nsfs_evict+0x24/0x30 [7.674486] LR is at clear_inode+0x20/0x9c The same to tun SIOCGSKNS command. To fix this problem, we make get_net_ns() return -EINVAL when NET_NS is disabled. Meanwhile move it to right place net/core/net_namespace.c. Signed-off-by: Changbin Du <changbin.du@gmail.com> Fixes: c62cce2 ("net: add an ioctl to get a socket network namespace") Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Christian Brauner <christian.brauner@ubuntu.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Our syzkaller trigger the "BUG_ON(!list_empty(&inode->i_wb_list))" in clear_inode: kernel BUG at fs/inode.c:519! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: Process syz-executor.0 (pid: 249, stack limit = 0x00000000a12409d7) CPU: 1 PID: 249 Comm: syz-executor.0 Not tainted 4.19.95 Hardware name: linux,dummy-virt (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : clear_inode+0x280/0x2a8 lr : clear_inode+0x280/0x2a8 Call trace: clear_inode+0x280/0x2a8 ext4_clear_inode+0x38/0xe8 ext4_free_inode+0x130/0xc68 ext4_evict_inode+0xb20/0xcb8 evict+0x1a8/0x3c0 iput+0x344/0x460 do_unlinkat+0x260/0x410 __arm64_sys_unlinkat+0x6c/0xc0 el0_svc_common+0xdc/0x3b0 el0_svc_handler+0xf8/0x160 el0_svc+0x10/0x218 Kernel panic - not syncing: Fatal exception A crash dump of this problem show that someone called __munlock_pagevec to clear page LRU without lock_page: do_mmap -> mmap_region -> do_munmap -> munlock_vma_pages_range -> __munlock_pagevec. As a result memory_failure will call identify_page_state without wait_on_page_writeback. And after truncate_error_page clear the mapping of this page. end_page_writeback won't call sb_clear_inode_writeback to clear inode->i_wb_list. That will trigger BUG_ON in clear_inode! Fix it by checking PageWriteback too to help determine should we skip wait_on_page_writeback. Link: https://lkml.kernel.org/r/20210604084705.3729204-1-yangerkun@huawei.com Fixes: 0bc1f8b ("hwpoison: fix the handling path of the victimized page frame that belong to non-LRU") Signed-off-by: yangerkun <yangerkun@huawei.com> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Jan Kara <jack@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The device can be requested to be attached despite being not probed. This situation is possible if devlink reload races with module removal, and the following kernel panic is an outcome of such race. mlx5_core 0000:00:09.0: firmware version: 4.7.9999 mlx5_core 0000:00:09.0: 0.000 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x255 link) BUG: unable to handle page fault for address: fffffffffffffff0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 3218067 P4D 3218067 PUD 321a067 PMD 0 Oops: 0000 [#1] SMP KASAN NOPTI CPU: 7 PID: 250 Comm: devlink Not tainted 5.12.0-rc2+ #2836 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_attach_device+0x80/0x280 [mlx5_core] Code: f8 48 c1 e8 03 42 80 3c 38 00 0f 85 80 01 00 00 48 8b 45 68 48 8d 78 f0 48 89 fe 48 c1 ee 03 42 80 3c 3e 00 0f 85 70 01 00 00 <48> 8b 40 f0 48 85 c0 74 0d 48 89 ef ff d0 85 c0 0f 85 84 05 0e 00 RSP: 0018:ffff8880129675f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff827407f1 RDX: 1ffff110011336cf RSI: 1ffffffffffffffe RDI: fffffffffffffff0 RBP: ffff888008e0c000 R08: 0000000000000008 R09: ffffffffa0662ee7 R10: fffffbfff40cc5dc R11: 0000000000000000 R12: ffff88800ea002e0 R13: ffffed1001d459f7 R14: ffffffffa05ef4f8 R15: dffffc0000000000 FS: 00007f51dfeaf740(0000) GS:ffff88806d5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffff0 CR3: 000000000bc82006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5_load_one+0x117/0x1d0 [mlx5_core] devlink_reload+0x2d5/0x520 ? devlink_remote_reload_actions_performed+0x30/0x30 ? mutex_trylock+0x24b/0x2d0 ? devlink_nl_cmd_reload+0x62b/0x1070 devlink_nl_cmd_reload+0x66d/0x1070 ? devlink_reload+0x520/0x520 ? devlink_nl_pre_doit+0x64/0x4d0 genl_family_rcv_msg_doit+0x1e9/0x2f0 ? mutex_lock_io_nested+0x1130/0x1130 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240 ? security_capable+0x51/0x90 genl_rcv_msg+0x27f/0x4a0 ? genl_get_cmd+0x3c0/0x3c0 ? lock_acquire+0x1a9/0x6d0 ? devlink_reload+0x520/0x520 ? lock_release+0x6c0/0x6c0 netlink_rcv_skb+0x11d/0x340 ? genl_get_cmd+0x3c0/0x3c0 ? netlink_ack+0x9f0/0x9f0 ? lock_release+0x1f9/0x6c0 genl_rcv+0x24/0x40 netlink_unicast+0x433/0x700 ? netlink_attachskb+0x730/0x730 ? _copy_from_iter_full+0x178/0x650 ? __alloc_skb+0x113/0x2b0 netlink_sendmsg+0x6f1/0xbd0 ? netlink_unicast+0x700/0x700 ? netlink_unicast+0x700/0x700 sock_sendmsg+0xb0/0xe0 __sys_sendto+0x193/0x240 ? __x64_sys_getpeername+0xb0/0xb0 ? copy_page_range+0x2300/0x2300 ? __up_read+0x1a1/0x7b0 ? do_user_addr_fault+0x219/0xdc0 __x64_sys_sendto+0xdd/0x1b0 ? syscall_enter_from_user_mode+0x1d/0x50 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f51dffb514a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c RSP: 002b:00007ffcaef22e78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f51dffb514a RDX: 0000000000000030 RSI: 000055750daf2440 RDI: 0000000000000003 RBP: 000055750daf2410 R08: 00007f51e0081200 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: mlx5_core(-) ptp pps_core ib_ipoib rdma_ucm rdma_cm iw_cm ib_cm ib_umad ib_uverbs ib_core [last unloaded: mlx5_ib] CR2: fffffffffffffff0 ---[ end trace 7789831bfe74fa42 ]--- Fixes: a925b5e ("net/mlx5: Register mlx5 devices to auxiliary virtual bus") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

…t set On systems without any specific PMU driver support registered, running perf record causes Oops. The relevant portion from call trace: BUG: Kernel NULL pointer dereference on read at 0x00000040 Faulting instruction address: 0xc0021f0c Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K PREEMPT CMPCPRO SAF3000 DIE NOTIFICATION CPU: 0 PID: 442 Comm: null_syscall Not tainted 5.13.0-rc6-s3k-dev-01645-g7649ee3d2957 #5164 NIP: c0021f0c LR: c00e8ad8 CTR: c00d8a5c NIP perf_instruction_pointer+0x10/0x60 LR perf_prepare_sample+0x344/0x674 Call Trace: perf_prepare_sample+0x7c/0x674 (unreliable) perf_event_output_forward+0x3c/0x94 __perf_event_overflow+0x74/0x14c perf_swevent_hrtimer+0xf8/0x170 __hrtimer_run_queues.constprop.0+0x160/0x318 hrtimer_interrupt+0x148/0x3b0 timer_interrupt+0xc4/0x22c Decrementer_virt+0xb8/0xbc During perf record session, perf_instruction_pointer() is called to capture the sample IP. This function in core-book3s accesses ppmu->flags. If a platform specific PMU driver is not registered, ppmu is set to NULL and accessing its members results in a crash. Fix this crash by checking if ppmu is set. Fixes: 2ca13a4 ("powerpc/perf: Use regs->nip when SIAR is zero") Cc: stable@vger.kernel.org # v5.11+ Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1623952506-1431-1-git-send-email-atrajeev@linux.vnet.ibm.com

Andreas reported commit fc85047 ("riscv: bpf: Avoid breaking W^X") breaks booting with one kind of defconfig, I reproduced a kernel panic with the defconfig: [ 0.138553] Unable to handle kernel paging request at virtual address ffffffff81201220 [ 0.139159] Oops [#1] [ 0.139303] Modules linked in: [ 0.139601] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc5-default+ #1 [ 0.139934] Hardware name: riscv-virtio,qemu (DT) [ 0.140193] epc : __memset+0xc4/0xfc [ 0.140416] ra : skb_flow_dissector_init+0x1e/0x82 [ 0.140609] epc : ffffffff8029806c ra : ffffffff8033be78 sp : ffffffe001647da0 [ 0.140878] gp : ffffffff81134b08 tp : ffffffe001654380 t0 : ffffffff81201158 [ 0.141156] t1 : 0000000000000002 t2 : 0000000000000154 s0 : ffffffe001647dd0 [ 0.141424] s1 : ffffffff80a43250 a0 : ffffffff81201220 a1 : 0000000000000000 [ 0.141654] a2 : 000000000000003c a3 : ffffffff81201258 a4 : 0000000000000064 [ 0.141893] a5 : ffffffff8029806c a6 : 0000000000000040 a7 : ffffffffffffffff [ 0.142126] s2 : ffffffff81201220 s3 : 0000000000000009 s4 : ffffffff81135088 [ 0.142353] s5 : ffffffff81135038 s6 : ffffffff8080ce80 s7 : ffffffff80800438 [ 0.142584] s8 : ffffffff80bc6578 s9 : 0000000000000008 s10: ffffffff806000ac [ 0.142810] s11: 0000000000000000 t3 : fffffffffffffffc t4 : 0000000000000000 [ 0.143042] t5 : 0000000000000155 t6 : 00000000000003ff [ 0.143220] status: 0000000000000120 badaddr: ffffffff81201220 cause: 000000000000000f [ 0.143560] [<ffffffff8029806c>] __memset+0xc4/0xfc [ 0.143859] [<ffffffff8061e984>] init_default_flow_dissectors+0x22/0x60 [ 0.144092] [<ffffffff800010fc>] do_one_initcall+0x3e/0x168 [ 0.144278] [<ffffffff80600df0>] kernel_init_freeable+0x1c8/0x224 [ 0.144479] [<ffffffff804868a8>] kernel_init+0x12/0x110 [ 0.144658] [<ffffffff800022de>] ret_from_exception+0x0/0xc [ 0.145124] ---[ end trace f1e9643daa46d591 ]--- After some investigation, I think I found the root cause: commit 2bfc6cd ("move kernel mapping outside of linear mapping") moves BPF JIT region after the kernel: | #define BPF_JIT_REGION_START PFN_ALIGN((unsigned long)&_end) The &_end is unlikely aligned with PMD size, so the front bpf jit region sits with part of kernel .data section in one PMD size mapping. But kernel is mapped in PMD SIZE, when bpf_jit_binary_lock_ro() is called to make the first bpf jit prog ROX, we will make part of kernel .data section RO too, so when we write to, for example memset the .data section, MMU will trigger a store page fault. To fix the issue, we need to ensure the BPF JIT region is PMD size aligned. This patch acchieve this goal by restoring the BPF JIT region to original position, I.E the 128MB before kernel .text section. The modification to kasan_init.c is inspired by Alexandre. Fixes: fc85047 ("riscv: bpf: Avoid breaking W^X") Reported-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

ASan reported a memory leak of BPF-related ksymbols map and dso. The leak is caused by refount never reaching 0, due to missing __put calls in the function machine__process_ksymbol_register. Once the dso is inserted in the map, dso__put() should be called (map__new2() increases the refcount to 2). The same thing applies for the map when it's inserted into maps (maps__insert() increases the refcount to 2). $ sudo ./perf record -- sleep 5 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ] ================================================================= ==297735==ERROR: LeakSanitizer: detected memory leaks Direct leak of 6992 byte(s) in 19 object(s) allocated from: #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7) #1 0x8e4e53 in map__new2 /home/user/linux/tools/perf/util/map.c:216:20 #2 0x8cf68c in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:778:10 [...] Indirect leak of 8702 byte(s) in 19 object(s) allocated from: #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7) #1 0x8728d7 in dso__new_id /home/user/linux/tools/perf/util/dso.c:1256:20 #2 0x872015 in dso__new /home/user/linux/tools/perf/util/dso.c:1295:9 #3 0x8cf623 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:774:21 [...] Indirect leak of 1520 byte(s) in 19 object(s) allocated from: #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7) #1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23 #2 0x888954 in map__process_kallsym_symbol /home/user/linux/tools/perf/util/symbol.c:710:8 [...] Indirect leak of 1406 byte(s) in 19 object(s) allocated from: #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7) #1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23 #2 0x8cfbd8 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:803:8 [...] Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tommi Rantala <tommi.t.rantala@nokia.com> Link: http://lore.kernel.org/lkml/20210612173751.188582-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

RAC flush causes kernel panics on BCM6358 with EHCI/OHCI when booting from TP1: [ 3.881739] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 3.895011] Reserved instruction in kernel code[#1]: [ 3.900113] CPU: 0 PID: 1 Comm: init Not tainted 5.10.16 #0 [ 3.905829] $ 0 : 00000000 10008700 00000000 77d94060 [ 3.911238] $ 4 : 7fd1f088 00000000 81431cac 81431ca0 [ 3.916641] $ 8 : 00000000 ffffefff 8075cd34 00000000 [ 3.922043] $12 : 806f8d40 f3e812b7 00000000 000d9aaa [ 3.927446] $16 : 7fd1f068 7fd1f080 7ff559b8 81428470 [ 3.932848] $20 : 00000000 00000000 55590000 77d70000 [ 3.938251] $24 : 00000018 00000010 [ 3.943655] $28 : 81430000 81431e60 81431f28 800157fc [ 3.949058] Hi : 00000000 [ 3.952013] Lo : 00000000 [ 3.955019] epc : 80015808 setup_sigcontext+0x54/0x24c [ 3.960464] ra : 800157fc setup_sigcontext+0x48/0x24c [ 3.965913] Status: 10008703 KERNEL EXL IE [ 3.970216] Cause : 00800028 (ExcCode 0a) [ 3.974340] PrId : 0002a010 (Broadcom BMIPS4350) [ 3.979170] Modules linked in: ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common [ 3.992907] Process init (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=77e22ec8) [ 4.000776] Stack : 81431ef4 7fd1f080 81431f28 81428470 7fd1f068 81431edc 7ff559b8 81428470 [ 4.009467] 81431f28 7fd1f080 55590000 77d70000 77d5498c 80015c70 806f0000 8063ae74 [ 4.018149] 08100002 81431f28 0000000a 08100002 81431f28 0000000a 77d6b418 00000003 [ 4.026831] ffffffff 80016414 80080734 81431ecc 81431ecc 00000001 00000000 04000000 [ 4.035512] 77d54874 00000000 00000000 00000000 00000000 00000012 00000002 00000000 [ 4.044196] ... [ 4.046706] Call Trace: [ 4.049238] [<80015808>] setup_sigcontext+0x54/0x24c [ 4.054356] [<80015c70>] setup_frame+0xdc/0x124 [ 4.059015] [<80016414>] do_notify_resume+0x1dc/0x288 [ 4.064207] [<80011b50>] work_notifysig+0x10/0x18 [ 4.069036] [ 4.070538] Code: 8fc300b4 00001025 26240008 <ac820000> ac830004 3c048063 0c0228aa 24846a00 26240010 [ 4.080686] [ 4.082517] ---[ end trace 22a8edb41f5f983b ]--- [ 4.087374] Kernel panic - not syncing: Fatal exception [ 4.092753] Rebooting in 1 seconds.. Because the bootloader (CFE) is not initializing the Read-ahead cache properly on the second thread (TP1). Since the RAC was not initialized properly, we should avoid flushing it at the risk of corrupting the instruction stream as seen in the trace above. Fixes: d59098a ("MIPS: bmips: use generic dma noncoherent ops") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The failover txq is inited as 16 queues. when a packet is transmitted from the failover device firstly, the failover device will select the queue which is returned from the primary device if the primary device is UP and running. If the primary device txq is bigger than the default 16, it can lead to the following warning: eth0 selects TX queue 18, but real number of TX queues is 16 The warning backtrace is: [ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1 [ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014 [ 32.147730] Call Trace: [ 32.147971] <TASK> [ 32.148183] dump_stack_lvl+0x48/0x70 [ 32.148514] dump_stack+0x10/0x20 [ 32.148820] netdev_core_pick_tx+0xb1/0xe0 [ 32.149180] __dev_queue_xmit+0x529/0xcf0 [ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0 [ 32.149967] ip_finish_output2+0x278/0x560 [ 32.150327] __ip_finish_output+0x1fe/0x2f0 [ 32.150690] ip_finish_output+0x2a/0xd0 [ 32.151032] ip_output+0x7a/0x110 [ 32.151337] ? __pfx_ip_finish_output+0x10/0x10 [ 32.151733] ip_local_out+0x5e/0x70 [ 32.152054] ip_send_skb+0x19/0x50 [ 32.152366] udp_send_skb.isra.0+0x163/0x3a0 [ 32.152736] udp_sendmsg+0xba8/0xec0 [ 32.153060] ? __folio_memcg_unlock+0x25/0x60 [ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 32.153854] ? sock_has_perm+0x85/0xa0 [ 32.154190] inet_sendmsg+0x6d/0x80 [ 32.154508] ? inet_sendmsg+0x6d/0x80 [ 32.154838] sock_sendmsg+0x62/0x70 [ 32.155152] ____sys_sendmsg+0x134/0x290 [ 32.155499] ___sys_sendmsg+0x81/0xc0 [ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0 [ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0 [ 32.156649] ? get_random_u16+0x69/0xf0 [ 32.156989] ? __fget_light+0xcf/0x110 [ 32.157326] __sys_sendmmsg+0xc4/0x210 [ 32.157657] ? __sys_connect+0xb7/0xe0 [ 32.157995] ? __audit_syscall_entry+0xce/0x140 [ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0 [ 32.158820] __x64_sys_sendmmsg+0x24/0x30 [ 32.159171] do_syscall_64+0x38/0x90 [ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fix that by reducing txq number as the non-existent primary-dev does. Fixes: cfc80d9 ("net: Introduce net_failover driver") Signed-off-by: Faicker Mo <faicker.mo@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>

… into HEAD KVM/riscv fixes for 6.3, take #1 - Fix VM hang in case of timer delta being zero

snd_card_ymfpci_remove() was removed in commit c6e6bb5 ("ALSA: ymfpci: Allocate resources with device-managed APIs"), but the call to snd_card_new() was not replaced with snd_devm_card_new(). Since there was no longer a call to snd_card_free, unloading the module would eventually result in Oops: [697561.532887] BUG: unable to handle page fault for address: ffffffffc0924480 [697561.532893] #PF: supervisor read access in kernel mode [697561.532896] #PF: error_code(0x0000) - not-present page [697561.532899] PGD ae1e15067 P4D ae1e15067 PUD ae1e17067 PMD 11a8f5067 PTE 0 [697561.532905] Oops: 0000 [#1] PREEMPT SMP NOPTI [697561.532909] CPU: 21 PID: 5080 Comm: wireplumber Tainted: G W OE 6.2.7 #1 [697561.532914] Hardware name: System manufacturer System Product Name/TUF GAMING X570-PLUS, BIOS 4408 10/28/2022 [697561.532916] RIP: 0010:try_module_get.part.0+0x1a/0xe0 [697561.532924] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 49 89 fc bf 01 00 00 00 e8 56 3c f8 ff <41> 83 3c 24 02 0f 84 96 00 00 00 41 8b 84 24 30 03 00 00 85 c0 0f [697561.532927] RSP: 0018:ffffbe9b858c3bd8 EFLAGS: 00010246 [697561.532930] RAX: ffff9815d14f1900 RBX: ffff9815c14e6000 RCX: 0000000000000000 [697561.532933] RDX: 0000000000000000 RSI: ffffffffc055092c RDI: ffffffffb3778c1a [697561.532935] RBP: ffffbe9b858c3be8 R08: 0000000000000040 R09: ffff981a1a741380 [697561.532937] R10: ffffbe9b858c3c80 R11: 00000009d56533a6 R12: ffffffffc0924480 [697561.532939] R13: ffff9823439d8500 R14: 0000000000000025 R15: ffff9815cd109f80 [697561.532942] FS: 00007f13084f1f80(0000) GS:ffff9824aef40000(0000) knlGS:0000000000000000 [697561.532945] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [697561.532947] CR2: ffffffffc0924480 CR3: 0000000145344000 CR4: 0000000000350ee0 [697561.532949] Call Trace: [697561.532951] <TASK> [697561.532955] try_module_get+0x13/0x30 [697561.532960] snd_ctl_open+0x61/0x1c0 [snd] [697561.532976] snd_open+0xb4/0x1e0 [snd] [697561.532989] chrdev_open+0xc7/0x240 [697561.532995] ? fsnotify_perm.part.0+0x6e/0x160 [697561.533000] ? __pfx_chrdev_open+0x10/0x10 [697561.533005] do_dentry_open+0x169/0x440 [697561.533009] vfs_open+0x2d/0x40 [697561.533012] path_openat+0xa9d/0x10d0 [697561.533017] ? debug_smp_processor_id+0x17/0x20 [697561.533022] ? trigger_load_balance+0x65/0x370 [697561.533026] do_filp_open+0xb2/0x160 [697561.533032] ? _raw_spin_unlock+0x19/0x40 [697561.533036] ? alloc_fd+0xa9/0x190 [697561.533040] do_sys_openat2+0x9f/0x160 [697561.533044] __x64_sys_openat+0x55/0x90 [697561.533048] do_syscall_64+0x3b/0x90 [697561.533052] entry_SYSCALL_64_after_hwframe+0x72/0xdc [697561.533056] RIP: 0033:0x7f1308a40db4 [697561.533059] Code: 24 20 eb 8f 66 90 44 89 54 24 0c e8 46 68 f8 ff 44 8b 54 24 0c 44 89 e2 48 89 ee 41 89 c0 bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 32 44 89 c7 89 44 24 0c e8 78 68 f8 ff 8b 44 [697561.533062] RSP: 002b:00007ffcce664450 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 [697561.533066] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1308a40db4 [697561.533068] RDX: 0000000000080000 RSI: 00007ffcce664690 RDI: 00000000ffffff9c [697561.533070] RBP: 00007ffcce664690 R08: 0000000000000000 R09: 0000000000000012 [697561.533072] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000080000 [697561.533074] R13: 00007f13054b069b R14: 0000565209f83200 R15: 0000000000000000 [697561.533078] </TASK> Fixes: c6e6bb5 ("ALSA: ymfpci: Allocate resources with device-managed APIs") Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Link: https://lore.kernel.org/r/20230329032422.170024-1-tasos@tasossah.com Signed-off-by: Takashi Iwai <tiwai@suse.de>

The snd_dma_buffer.bytes field now contains the aligned size, which this snd_BUG_ON() did not account for, resulting in the following: [ 9.625915] ------------[ cut here ]------------ [ 9.633440] WARNING: CPU: 0 PID: 126 at sound/pci/ymfpci/ymfpci_main.c:2168 snd_ymfpci_create+0x681/0x698 [snd_ymfpci] [ 9.648926] Modules linked in: snd_ymfpci(+) snd_intel_dspcfg kvm(+) snd_intel_sdw_acpi snd_ac97_codec snd_mpu401_uart snd_opl3_lib irqbypass snd_hda_codec gameport snd_rawmidi crct10dif_pclmul crc32_pclmul cfg80211 snd_hda_core polyval_clmulni polyval_generic gf128mul snd_seq_device ghash_clmulni_intel snd_hwdep ac97_bus sha512_ssse3 rfkill snd_pcm aesni_intel tg3 snd_timer crypto_simd snd mxm_wmi libphy cryptd k10temp fam15h_power pcspkr soundcore sp5100_tco wmi acpi_cpufreq mac_hid dm_multipath sg loop fuse dm_mod bpf_preload ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 sr_mod cdrom ata_generic pata_acpi firewire_ohci crc32c_intel firewire_core xhci_pci crc_itu_t pata_via xhci_pci_renesas floppy [ 9.711849] CPU: 0 PID: 126 Comm: kworker/0:2 Not tainted 6.1.21-1-lts #1 08d2e5ece03136efa7c6aeea9a9c40916b1bd8da [ 9.722200] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 9.732204] Workqueue: events work_for_cpu_fn [ 9.736580] RIP: 0010:snd_ymfpci_create+0x681/0x698 [snd_ymfpci] [ 9.742594] Code: 8c c0 4c 89 e2 48 89 df 48 c7 c6 92 c6 8c c0 e8 15 d0 e9 ff 48 83 c4 08 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f e9 d3 7a 33 e3 <0f> 0b e9 cb fd ff ff 41 bd fb ff ff ff eb db 41 bd f4 ff ff ff eb [ 9.761358] RSP: 0018:ffffab64804e7da0 EFLAGS: 00010287 [ 9.766594] RAX: ffff8fa2df06c400 RBX: ffff8fa3073a8000 RCX: ffff8fa303fbc4a8 [ 9.773734] RDX: ffff8fa2df06d000 RSI: 0000000000000010 RDI: 0000000000000020 [ 9.780876] RBP: ffff8fa300b5d0d0 R08: ffff8fa3073a8e50 R09: 00000000df06bf00 [ 9.788018] R10: ffff8fa2df06bf00 R11: 00000000df068200 R12: ffff8fa3073a8918 [ 9.795159] R13: 0000000000000000 R14: 0000000000000080 R15: ffff8fa2df068200 [ 9.802317] FS: 0000000000000000(0000) GS:ffff8fa9fec00000(0000) knlGS:0000000000000000 [ 9.810414] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.816158] CR2: 000055febaf66500 CR3: 0000000101a2e000 CR4: 00000000000406f0 [ 9.823301] Call Trace: [ 9.825747] <TASK> [ 9.827889] snd_card_ymfpci_probe+0x194/0x950 [snd_ymfpci b78a5fe64b5663a6390a909c67808567e3e73615] [ 9.837030] ? finish_task_switch.isra.0+0x90/0x2d0 [ 9.841918] local_pci_probe+0x45/0x80 [ 9.845680] work_for_cpu_fn+0x1a/0x30 [ 9.849431] process_one_work+0x1c7/0x380 [ 9.853464] worker_thread+0x1af/0x390 [ 9.857225] ? rescuer_thread+0x3b0/0x3b0 [ 9.861254] kthread+0xde/0x110 [ 9.864414] ? kthread_complete_and_exit+0x20/0x20 [ 9.869210] ret_from_fork+0x22/0x30 [ 9.872792] </TASK> [ 9.874985] ---[ end trace 0000000000000000 ]--- Fixes: 5c1733e ("ALSA: memalloc: Align buffer allocations in page size") Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Link: https://lore.kernel.org/r/20230329032808.170403-1-tasos@tasossah.com Signed-off-by: Takashi Iwai <tiwai@suse.de>

Commit 3e45352 ("md: Free resources in __md_stop") tried to fix null-ptr-deference for 'active_io' by moving percpu_ref_exit() to __md_stop(), however, the commit also moving 'writes_pending' to __md_stop(), and this will cause mdadm tests broken: BUG: kernel NULL pointer dereference, address: 0000000000000038 Oops: 0000 [#1] PREEMPT SMP CPU: 15 PID: 17830 Comm: mdadm Not tainted 6.3.0-rc3-next-20230324-00009-g520d37 RIP: 0010:free_percpu+0x465/0x670 Call Trace: <TASK> __percpu_ref_exit+0x48/0x70 percpu_ref_exit+0x1a/0x90 __md_stop+0xe9/0x170 do_md_stop+0x1e1/0x7b0 md_ioctl+0x90c/0x1aa0 blkdev_ioctl+0x19b/0x400 vfs_ioctl+0x20/0x50 __x64_sys_ioctl+0xba/0xe0 do_syscall_64+0x6c/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0xcd And the problem can be reporduced 100% by following test: mdadm -CR /dev/md0 -l1 -n1 /dev/sda --force echo inactive > /sys/block/md0/md/array_state echo read-auto > /sys/block/md0/md/array_state echo inactive > /sys/block/md0/md/array_state Root cause: // start raid raid1_run mddev_init_writes_pending percpu_ref_init // inactive raid array_state_store do_md_stop __md_stop percpu_ref_exit // start raid again array_state_store do_md_run raid1_run mddev_init_writes_pending if (mddev->writes_pending.percpu_count_ptr) // won't reinit // inactive raid again ... percpu_ref_exit -> null-ptr-deference Before the commit, 'writes_pending' is exited when mddev is freed, and it's safe to restart raid because mddev_init_writes_pending() already make sure that 'writes_pending' will only be initialized once. Fix the prblem by moving 'writes_pending' back, it's a litter hard to find the relationship between alloc memory and free memory, however, code changes is much less and we lived with this for a long time already. Fixes: 3e45352 ("md: Free resources in __md_stop") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230328094400.1448955-1-yukuai1@huaweicloud.com

The global rwsem dmar_global_lock was introduced by commit 3a5670e ("iommu/vt-d: Introduce a rwsem to protect global data structures"). It is used to protect DMAR related global data from DMAR hotplug operations. Using dmar_global_lock in intel_irq_remapping_alloc() is unnecessary as the DMAR global data structures are not touched there. Remove it to avoid below lockdep warning. ====================================================== WARNING: possible circular locking dependency detected 6.3.0-rc2 torvalds#468 Not tainted ------------------------------------------------------ swapper/0/1 is trying to acquire lock: ff1db4cb40178698 (&domain->mutex){+.+.}-{3:3}, at: __irq_domain_alloc_irqs+0x3b/0xa0 but task is already holding lock: ffffffffa0c1cdf0 (dmar_global_lock){++++}-{3:3}, at: intel_iommu_init+0x58e/0x880 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (dmar_global_lock){++++}-{3:3}: lock_acquire+0xd6/0x320 down_read+0x42/0x180 intel_irq_remapping_alloc+0xad/0x750 mp_irqdomain_alloc+0xb8/0x2b0 irq_domain_alloc_irqs_locked+0x12f/0x2d0 __irq_domain_alloc_irqs+0x56/0xa0 alloc_isa_irq_from_domain.isra.7+0xa0/0xe0 mp_map_pin_to_irq+0x1dc/0x330 setup_IO_APIC+0x128/0x210 apic_intr_mode_init+0x67/0x110 x86_late_time_init+0x24/0x40 start_kernel+0x41e/0x7e0 secondary_startup_64_no_verify+0xe0/0xeb -> #0 (&domain->mutex){+.+.}-{3:3}: check_prevs_add+0x160/0xef0 __lock_acquire+0x147d/0x1950 lock_acquire+0xd6/0x320 __mutex_lock+0x9c/0xfc0 __irq_domain_alloc_irqs+0x3b/0xa0 dmar_alloc_hwirq+0x9e/0x120 iommu_pmu_register+0x11d/0x200 intel_iommu_init+0x5de/0x880 pci_iommu_init+0x12/0x40 do_one_initcall+0x65/0x350 kernel_init_freeable+0x3ca/0x610 kernel_init+0x1a/0x140 ret_from_fork+0x29/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(dmar_global_lock); lock(&domain->mutex); lock(dmar_global_lock); lock(&domain->mutex); *** DEADLOCK *** Fixes: 9dbb8e3 ("irqdomain: Switch to per-domain locking") Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Tested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20230314051836.23817-1-baolu.lu@linux.intel.com Link: https://lore.kernel.org/r/20230329134721.469447-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch platform, the following kernel panic occurs: [...] Oops[#1]: CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ torvalds#18 Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018 ... ... ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560 ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 0000000c (PPLV0 +PIE +PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000000040 PRID: 0014c011 (Loongson-64bit, Loongson-3C5000) Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...) Stack : ... Call Trace: [<9000000004162774>] copy_page_to_iter+0x74/0x1c0 [<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560 [<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0 [<90000000049aae34>] inet_recvmsg+0x54/0x100 [<900000000481ad5c>] sock_recvmsg+0x7c/0xe0 [<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0 [<900000000481e27c>] sys_recvfrom+0x1c/0x40 [<9000000004c076ec>] do_syscall+0x8c/0xc0 [<9000000003731da4>] handle_syscall+0xc4/0x160 Code: ... ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception Kernel relocated by 0x3510000 .text @ 0x9000000003710000 .data @ 0x9000000004d70000 .bss @ 0x9000000006469400 ---[ end Kernel panic - not syncing: Fatal exception ]--- [...] This crash happens every time when running sockmap_skb_verdict_shutdown subtest in sockmap_basic. This crash is because a NULL pointer is passed to page_address() in the sk_msg_recvmsg(). Due to the different implementations depending on the architecture, page_address(NULL) will trigger a panic on Loongarch platform but not on x86 platform. So this bug was hidden on x86 platform for a while, but now it is exposed on Loongarch platform. The root cause is that a zero length skb (skb->len == 0) was put on the queue. This zero length skb is a TCP FIN packet, which was sent by shutdown(), invoked in test_sockmap_skb_verdict_shutdown(): shutdown(p1, SHUT_WR); In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no page is put to this sge (see sg_set_page in sg_set_page), but this empty sge is queued into ingress_msg list. And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it to kmap_local_page() and to page_address(), then kernel panics. To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(), if copy is zero, that means it's a zero length skb, skip invoking copy_page_to_iter(). We are using the EFAULT return triggered by copy_page_to_iter to check for is_fin in tcp_bpf.c. Fixes: 604326b ("bpf, sockmap: convert to generic sk_msg interface") Suggested-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/e3a16eacdc6740658ee02a33489b1b9d4912f378.1719992715.git.tanggeliang@kylinos.cn

nft_chain_validate already performs loop detection because a cycle will result in a call stack overflow (ctx->level >= NFT_JUMP_STACK_SIZE). It also follows maps via ->validate callback in nft_lookup, so there appears no reason to iterate the maps again. nf_tables_check_loops() and all its helper functions can be removed. This improves ruleset load time significantly, from 23s down to 12s. This also fixes a crash bug. Old loop detection code can result in unbounded recursion: BUG: TASK stack guard page was hit at .... Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN CPU: 4 PID: 1539 Comm: nft Not tainted 6.10.0-rc5+ #1 [..] with a suitable ruleset during validation of register stores. I can't see any actual reason to attempt to check for this from nft_validate_register_store(), at this point the transaction is still in progress, so we don't have a full picture of the rule graph. For nf-next it might make sense to either remove it or make this depend on table->validate_state in case we could catch an error earlier (for improved error reporting to userspace). Fixes: 20a6934 ("netfilter: nf_tables: add netlink set API") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following batch contains Netfilter fixes for net: Patch #1 fixes a bogus WARN_ON splat in nfnetlink_queue. Patch #2 fixes a crash due to stack overflow in chain loop detection by using the existing chain validation routines Both patches from Florian Westphal. netfilter pull request 24-07-11 * tag 'nf-24-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: prefer nft_chain_validate netfilter: nfnetlink_queue: drop bogus WARN_ON ==================== Link: https://patch.msgid.link/20240711093948.3816-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When putting an inode during extent map shrinking we're doing a standard iput() but that may take a long time in case the inode is dirty and we are doing the final iput that triggers eviction - the VFS will have to wait for writeback before calling the btrfs evict callback (see fs/inode.c:evict()). This slows down the task running the shrinker which may have been triggered while updating some tree for example, meaning locks are held as well as an open transaction handle. Also if the iput() ends up triggering eviction and the inode has no links anymore, then we trigger item truncation which requires flushing delayed items, space reservation to start a transaction and that may trigger the space reclaim task and wait for it, resulting in deadlocks in case the reclaim task needs for example to commit a transaction and the shrinker is being triggered from a path holding a transaction handle. Syzbot reported such a case with the following stack traces: ====================================================== WARNING: possible circular locking dependency detected 6.10.0-rc2-syzkaller-00010-g2ab795141095 #0 Not tainted ------------------------------------------------------ kswapd0/111 is trying to acquire lock: ffff88801eae4610 (sb_internal#3){.+.+}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x110/0x330 fs/btrfs/delayed-inode.c:1275 but task is already holding lock: ffffffff8dd3a9a0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0xa88/0x1970 mm/vmscan.c:6924 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (fs_reclaim){+.+.}-{0:0}: __fs_reclaim_acquire mm/page_alloc.c:3783 [inline] fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3797 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3890 [inline] slab_alloc_node mm/slub.c:3980 [inline] kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4019 btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411 alloc_inode+0x5d/0x230 fs/inode.c:261 iget5_locked fs/inode.c:1235 [inline] iget5_locked+0x1c9/0x2c0 fs/inode.c:1228 btrfs_iget_locked fs/btrfs/inode.c:5590 [inline] btrfs_iget_path fs/btrfs/inode.c:5607 [inline] btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636 create_reloc_inode+0x403/0x820 fs/btrfs/relocation.c:3911 btrfs_relocate_block_group+0x471/0xe60 fs/btrfs/relocation.c:4114 btrfs_relocate_chunk+0x143/0x450 fs/btrfs/volumes.c:3373 __btrfs_balance fs/btrfs/volumes.c:4157 [inline] btrfs_balance+0x211a/0x3f00 fs/btrfs/volumes.c:4534 btrfs_ioctl_balance fs/btrfs/ioctl.c:3675 [inline] btrfs_ioctl+0x12ed/0x8290 fs/btrfs/ioctl.c:4742 __do_compat_sys_ioctl+0x2c3/0x330 fs/ioctl.c:1007 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #2 (btrfs_trans_num_extwriters){++++}-{0:0}: join_transaction+0x164/0xf40 fs/btrfs/transaction.c:315 start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700 btrfs_rebuild_free_space_tree+0xaa/0x480 fs/btrfs/free-space-tree.c:1323 btrfs_start_pre_rw_mount+0x218/0xf60 fs/btrfs/disk-io.c:2999 open_ctree+0x41ab/0x52e0 fs/btrfs/disk-io.c:3554 btrfs_fill_super fs/btrfs/super.c:946 [inline] btrfs_get_tree_super fs/btrfs/super.c:1863 [inline] btrfs_get_tree+0x11e9/0x1b90 fs/btrfs/super.c:2089 vfs_get_tree+0x8f/0x380 fs/super.c:1780 fc_mount+0x16/0xc0 fs/namespace.c:1125 btrfs_get_tree_subvol fs/btrfs/super.c:2052 [inline] btrfs_get_tree+0xa53/0x1b90 fs/btrfs/super.c:2090 vfs_get_tree+0x8f/0x380 fs/super.c:1780 do_new_mount fs/namespace.c:3352 [inline] path_mount+0x6e1/0x1f10 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount fs/namespace.c:3875 [inline] __ia32_sys_mount+0x295/0x320 fs/namespace.c:3875 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #1 (btrfs_trans_num_writers){++++}-{0:0}: join_transaction+0x148/0xf40 fs/btrfs/transaction.c:314 start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700 btrfs_rebuild_free_space_tree+0xaa/0x480 fs/btrfs/free-space-tree.c:1323 btrfs_start_pre_rw_mount+0x218/0xf60 fs/btrfs/disk-io.c:2999 open_ctree+0x41ab/0x52e0 fs/btrfs/disk-io.c:3554 btrfs_fill_super fs/btrfs/super.c:946 [inline] btrfs_get_tree_super fs/btrfs/super.c:1863 [inline] btrfs_get_tree+0x11e9/0x1b90 fs/btrfs/super.c:2089 vfs_get_tree+0x8f/0x380 fs/super.c:1780 fc_mount+0x16/0xc0 fs/namespace.c:1125 btrfs_get_tree_subvol fs/btrfs/super.c:2052 [inline] btrfs_get_tree+0xa53/0x1b90 fs/btrfs/super.c:2090 vfs_get_tree+0x8f/0x380 fs/super.c:1780 do_new_mount fs/namespace.c:3352 [inline] path_mount+0x6e1/0x1f10 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount fs/namespace.c:3875 [inline] __ia32_sys_mount+0x295/0x320 fs/namespace.c:3875 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #0 (sb_internal#3){.+.+}-{0:0}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write include/linux/fs.h:1655 [inline] sb_start_intwrite include/linux/fs.h:1838 [inline] start_transaction+0xbc1/0x1a70 fs/btrfs/transaction.c:694 btrfs_commit_inode_delayed_inode+0x110/0x330 fs/btrfs/delayed-inode.c:1275 btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291 evict+0x2ed/0x6c0 fs/inode.c:667 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 btrfs_scan_root fs/btrfs/extent_map.c:1118 [inline] btrfs_free_extent_maps+0xbd3/0x1320 fs/btrfs/extent_map.c:1189 super_cache_scan+0x409/0x550 fs/super.c:227 do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435 shrink_slab+0x18a/0x1310 mm/shrinker.c:662 shrink_one+0x493/0x7c0 mm/vmscan.c:4790 shrink_many mm/vmscan.c:4851 [inline] lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951 shrink_node mm/vmscan.c:5910 [inline] kswapd_shrink_node mm/vmscan.c:6720 [inline] balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911 kswapd+0x5ea/0xbf0 mm/vmscan.c:7180 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 other info that might help us debug this: Chain exists of: sb_internal#3 --> btrfs_trans_num_extwriters --> fs_reclaim Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(btrfs_trans_num_extwriters); lock(fs_reclaim); rlock(sb_internal#3); *** DEADLOCK *** 2 locks held by kswapd0/111: #0: ffffffff8dd3a9a0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0xa88/0x1970 mm/vmscan.c:6924 #1: ffff88801eae40e0 (&type->s_umount_key#62){++++}-{3:3}, at: super_trylock_shared fs/super.c:562 [inline] #1: ffff88801eae40e0 (&type->s_umount_key#62){++++}-{3:3}, at: super_cache_scan+0x96/0x550 fs/super.c:196 stack backtrace: CPU: 0 PID: 111 Comm: kswapd0 Not tainted 6.10.0-rc2-syzkaller-00010-g2ab795141095 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write include/linux/fs.h:1655 [inline] sb_start_intwrite include/linux/fs.h:1838 [inline] start_transaction+0xbc1/0x1a70 fs/btrfs/transaction.c:694 btrfs_commit_inode_delayed_inode+0x110/0x330 fs/btrfs/delayed-inode.c:1275 btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291 evict+0x2ed/0x6c0 fs/inode.c:667 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 btrfs_scan_root fs/btrfs/extent_map.c:1118 [inline] btrfs_free_extent_maps+0xbd3/0x1320 fs/btrfs/extent_map.c:1189 super_cache_scan+0x409/0x550 fs/super.c:227 do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435 shrink_slab+0x18a/0x1310 mm/shrinker.c:662 shrink_one+0x493/0x7c0 mm/vmscan.c:4790 shrink_many mm/vmscan.c:4851 [inline] lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951 shrink_node mm/vmscan.c:5910 [inline] kswapd_shrink_node mm/vmscan.c:6720 [inline] balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911 kswapd+0x5ea/0xbf0 mm/vmscan.c:7180 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> So fix this by using btrfs_add_delayed_iput() so that the final iput is delegated to the cleaner kthread. Link: https://lore.kernel.org/linux-btrfs/000000000000892280061a344581@google.com/ Reported-by: syzbot+3dad89b3993a4b275e72@syzkaller.appspotmail.com Fixes: 956a17d ("btrfs: add a shrinker for extent maps") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

On older chips not supporting multiple RSS contexts, reducing ethtool channels will crash: BUG: kernel NULL pointer dereference, address: 00000000000000b8 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 7032 Comm: ethtool Tainted: G S 6.10.0-rc4 #1 Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:bnxt_get_max_rss_ctx_ring+0x4c/0x90 [bnxt_en] Code: c3 d3 eb 4c 8b 83 38 01 00 00 48 8d bb 38 01 00 00 4c 39 c7 74 42 41 8d 54 24 ff 31 c0 0f b7 d2 4c 8d 4c 12 02 66 85 ed 74 1d <49> 8b 90 b8 00 00 00 49 8d 34 11 0f b7 0a 66 39 c8 0f 42 c1 48 83 RSP: 0018:ffffaaa501d23ba8 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff8efdf600c940 RCX: 0000000000000000 RDX: 000000000000007f RSI: ffffffffacf429c4 RDI: ffff8efdf600ca78 RBP: 0000000000000080 R08: 0000000000000000 R09: 0000000000000100 R10: 0000000000000001 R11: ffffaaa501d238c0 R12: 0000000000000080 R13: 0000000000000000 R14: ffff8efdf600c000 R15: 0000000000000006 FS: 00007f977a7d2740(0000) GS:ffff8f041f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000b8 CR3: 00000002320aa004 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body+0x15/0x60 ? page_fault_oops+0x157/0x440 ? do_user_addr_fault+0x60/0x770 ? _raw_spin_lock_irqsave+0x12/0x40 ? exc_page_fault+0x61/0x120 ? asm_exc_page_fault+0x22/0x30 ? bnxt_get_max_rss_ctx_ring+0x4c/0x90 [bnxt_en] ? bnxt_get_max_rss_ctx_ring+0x25/0x90 [bnxt_en] bnxt_set_channels+0x9d/0x340 [bnxt_en] ethtool_set_channels+0x14b/0x210 __dev_ethtool+0xdf8/0x2890 ? preempt_count_add+0x6a/0xa0 ? percpu_counter_add_batch+0x23/0x90 ? filemap_map_pages+0x417/0x4a0 ? avc_has_extended_perms+0x185/0x420 ? __pfx_udp_ioctl+0x10/0x10 ? sk_ioctl+0x55/0xf0 ? kmalloc_trace_noprof+0xe0/0x210 ? dev_ethtool+0x54/0x170 dev_ethtool+0xa2/0x170 dev_ioctl+0xbe/0x530 sock_do_ioctl+0xa3/0xf0 sock_ioctl+0x20d/0x2e0 bp->rss_ctx_list is not initialized if the chip or firmware does not support multiple RSS contexts. Fix it by adding a check in bnxt_get_max_rss_ctx_ring() before proceeding to reference bp->rss_ctx_list. Fixes: 0d1b7d6 ("bnxt: fix crashes when reducing ring count with active RSS contexts") Reported-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/netdev/ZpFEJeNpwxW1aW9k@gmail.com/ Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20240712175318.166811-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Enqueue packets in dql after dma engine starts causes race condition. Tx transfer starts once dma engine is started and may execute dql dequeue in completion before it gets queued. It results in following kernel crash while running iperf stress test: kernel BUG at lib/dynamic_queue_limits.c:99! <snip> Internal error: Oops - BUG: 00000000f2000800 [#1] SMP pc : dql_completed+0x238/0x248 lr : dql_completed+0x3c/0x248 Call trace: dql_completed+0x238/0x248 axienet_dma_tx_cb+0xa0/0x170 xilinx_dma_do_tasklet+0xdc/0x290 tasklet_action_common+0xf8/0x11c tasklet_action+0x30/0x3c handle_softirqs+0xf8/0x230 <snip> Start dmaengine after enqueue in dql fixes the crash. Fixes: 6a91b84 ("net: axienet: Introduce dmaengine support") Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com> Link: https://patch.msgid.link/20241030062533.2527042-2-suraj.gupta2@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Recently, we got a customer report that CIFS triggers oops while reconnecting to a server. [0] The workload runs on Kubernetes, and some pods mount CIFS servers in non-root network namespaces. The problem rarely happened, but it was always while the pod was dying. The root cause is wrong reference counting for network namespace. CIFS uses kernel sockets, which do not hold refcnt of the netns that the socket belongs to. That means CIFS must ensure the socket is always freed before its netns; otherwise, use-after-free happens. The repro steps are roughly: 1. mount CIFS in a non-root netns 2. drop packets from the netns 3. destroy the netns 4. unmount CIFS We can reproduce the issue quickly with the script [1] below and see the splat [2] if CONFIG_NET_NS_REFCNT_TRACKER is enabled. When the socket is TCP, it is hard to guarantee the netns lifetime without holding refcnt due to async timers. Let's hold netns refcnt for each socket as done for SMC in commit 9744d2b ("smc: Fix use-after-free in tcp_write_timer_handler()."). Note that we need to move put_net() from cifs_put_tcp_session() to clean_demultiplex_info(); otherwise, __sock_create() still could touch a freed netns while cifsd tries to reconnect from cifs_demultiplex_thread(). Also, maybe_get_net() cannot be put just before __sock_create() because the code is not under RCU and there is a small chance that the same address happened to be reallocated to another netns. [0]: CIFS: VFS: \\XXXXXXXXXXX has not responded in 15 seconds. Reconnecting... CIFS: Serverclose failed 4 times, giving up Unable to handle kernel paging request at virtual address 14de99e461f84a07 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [14de99e461f84a07] address between user and kernel address ranges Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: cls_bpf sch_ingress nls_utf8 cifs cifs_arc4 cifs_md4 dns_resolver tcp_diag inet_diag veth xt_state xt_connmark nf_conntrack_netlink xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sm4_ce_cipher sm4 sm3_ce sm3 sha3_ce sha512_ce sha512_arm64 sha1_ce ena button sch_fq_codel loop fuse configfs dmi_sysfs sha2_ce sha256_arm64 dm_mirror dm_region_hash dm_log dm_mod dax efivarfs CPU: 5 PID: 2690970 Comm: cifsd Not tainted 6.1.103-109.184.amzn2023.aarch64 #1 Hardware name: Amazon EC2 r7g.4xlarge/, BIOS 1.0 11/1/2018 pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : fib_rules_lookup+0x44/0x238 lr : __fib_lookup+0x64/0xbc sp : ffff8000265db790 x29: ffff8000265db790 x28: 0000000000000000 x27: 000000000000bd01 x26: 0000000000000000 x25: ffff000b4baf8000 x24: ffff00047b5e4580 x23: ffff8000265db7e0 x22: 0000000000000000 x21: ffff00047b5e4500 x20: ffff0010e3f694f8 x19: 14de99e461f849f7 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 3f92800abd010002 x11: 0000000000000001 x10: ffff0010e3f69420 x9 : ffff800008a6f294 x8 : 0000000000000000 x7 : 0000000000000006 x6 : 0000000000000000 x5 : 0000000000000001 x4 : ffff001924354280 x3 : ffff8000265db7e0 x2 : 0000000000000000 x1 : ffff0010e3f694f8 x0 : ffff00047b5e4500 Call trace: fib_rules_lookup+0x44/0x238 __fib_lookup+0x64/0xbc ip_route_output_key_hash_rcu+0x2c4/0x398 ip_route_output_key_hash+0x60/0x8c tcp_v4_connect+0x290/0x488 __inet_stream_connect+0x108/0x3d0 inet_stream_connect+0x50/0x78 kernel_connect+0x6c/0xac generic_ip_connect+0x10c/0x6c8 [cifs] __reconnect_target_unlocked+0xa0/0x214 [cifs] reconnect_dfs_server+0x144/0x460 [cifs] cifs_reconnect+0x88/0x148 [cifs] cifs_readv_from_socket+0x230/0x430 [cifs] cifs_read_from_socket+0x74/0xa8 [cifs] cifs_demultiplex_thread+0xf8/0x704 [cifs] kthread+0xd0/0xd4 Code: aa0003f8 f8480f13 eb18027f 540006c0 (b9401264) [1]: CIFS_CRED="/root/cred.cifs" CIFS_USER="Administrator" CIFS_PASS="Password" CIFS_IP="X.X.X.X" CIFS_PATH="//${CIFS_IP}/Users/Administrator/Desktop/CIFS_TEST" CIFS_MNT="/mnt/smb" DEV="enp0s3" cat <<EOF > ${CIFS_CRED} username=${CIFS_USER} password=${CIFS_PASS} domain=EXAMPLE.COM EOF unshare -n bash -c " mkdir -p ${CIFS_MNT} ip netns attach root 1 ip link add eth0 type veth peer veth0 netns root ip link set eth0 up ip -n root link set veth0 up ip addr add 192.168.0.2/24 dev eth0 ip -n root addr add 192.168.0.1/24 dev veth0 ip route add default via 192.168.0.1 dev eth0 ip netns exec root sysctl net.ipv4.ip_forward=1 ip netns exec root iptables -t nat -A POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE mount -t cifs ${CIFS_PATH} ${CIFS_MNT} -o vers=3.0,sec=ntlmssp,credentials=${CIFS_CRED},rsize=65536,wsize=65536,cache=none,echo_interval=1 touch ${CIFS_MNT}/a.txt ip netns exec root iptables -t nat -D POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE " umount ${CIFS_MNT} [2]: ref_tracker: net notrefcnt@000000004bbc008d has 1/1 users at sk_alloc (./include/net/net_namespace.h:339 net/core/sock.c:2227) inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1576) generic_ip_connect (fs/smb/client/connect.c:3075) cifs_get_tcp_session.part.0 (fs/smb/client/connect.c:3160 fs/smb/client/connect.c:1798) cifs_mount_get_session (fs/smb/client/trace.h:959 fs/smb/client/connect.c:3366) dfs_mount_share (fs/smb/client/dfs.c:63 fs/smb/client/dfs.c:285) cifs_mount (fs/smb/client/connect.c:3622) cifs_smb3_do_mount (fs/smb/client/cifsfs.c:949) smb3_get_tree (fs/smb/client/fs_context.c:784 fs/smb/client/fs_context.c:802 fs/smb/client/fs_context.c:794) vfs_get_tree (fs/super.c:1800) path_mount (fs/namespace.c:3508 fs/namespace.c:3834) __x64_sys_mount (fs/namespace.c:3848 fs/namespace.c:4057 fs/namespace.c:4034 fs/namespace.c:4034) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fixes: 26abe14 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>

Unloading the ice driver while switchdev port representors are added to a bridge can lead to kernel panic. Reproducer: modprobe ice devlink dev eswitch set $PF1_PCI mode switchdev ip link add $BR type bridge ip link set $BR up echo 2 > /sys/class/net/$PF1/device/sriov_numvfs sleep 2 ip link set $PF1 master $BR ip link set $VF1_PR master $BR ip link set $VF2_PR master $BR ip link set $PF1 up ip link set $VF1_PR up ip link set $VF2_PR up ip link set $VF1 up rmmod irdma ice When unloading the driver, ice_eswitch_detach() is eventually called as part of VF freeing. First, it removes a port representor from xarray, then unregister_netdev() is called (via repr->ops.rem()), finally representor is deallocated. The problem comes from the bridge doing its own deinit at the same time. unregister_netdev() triggers a notifier chain, resulting in ice_eswitch_br_port_deinit() being called. It should set repr->br_port = NULL, but this does not happen since repr has already been removed from xarray and is not found. Regardless, it finishes up deallocating br_port. At this point, repr is still not freed and an fdb event can happen, in which ice_eswitch_br_fdb_event_work() takes repr->br_port and tries to use it, which causes a panic (use after free). Note that this only happens with 2 or more port representors added to the bridge, since with only one representor port, the bridge deinit is slightly different (ice_eswitch_br_port_deinit() is called via ice_eswitch_br_ports_flush(), not ice_eswitch_br_port_unlink()). Trace: Oops: general protection fault, probably for non-canonical address 0xf129010fd1a93284: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x8948287e8d499420-0x8948287e8d499427] (...) Workqueue: ice_bridge_wq ice_eswitch_br_fdb_event_work [ice] RIP: 0010:__rht_bucket_nested+0xb4/0x180 (...) Call Trace: (...) ice_eswitch_br_fdb_find+0x3fa/0x550 [ice] ? __pfx_ice_eswitch_br_fdb_find+0x10/0x10 [ice] ice_eswitch_br_fdb_event_work+0x2de/0x1e60 [ice] ? __schedule+0xf60/0x5210 ? mutex_lock+0x91/0xe0 ? __pfx_ice_eswitch_br_fdb_event_work+0x10/0x10 [ice] ? ice_eswitch_br_update_work+0x1f4/0x310 [ice] (...) A workaround is available: brctl setageing $BR 0, which stops the bridge from adding fdb entries altogether. Change the order of operations in ice_eswitch_detach(): move the call to unregister_netdev() before removing repr from xarray. This way repr->br_port will be correctly set to NULL in ice_eswitch_br_port_deinit(), preventing a panic. Fixes: fff292b ("ice: add VF representors one by one") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The RTC update work involves runtime resuming the UFS controller. Hence, only start the RTC update work after runtime power management in the UFS driver has been fully initialized. This patch fixes the following kernel crash: Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Workqueue: events ufshcd_rtc_work Call trace: _raw_spin_lock_irqsave+0x34/0x8c (P) pm_runtime_get_if_active+0x24/0x9c (L) pm_runtime_get_if_active+0x24/0x9c ufshcd_rtc_work+0x138/0x1b4 process_one_work+0x148/0x288 worker_thread+0x2cc/0x3d4 kthread+0x110/0x114 ret_from_fork+0x10/0x20 Reported-by: Neil Armstrong <neil.armstrong@linaro.org> Closes: https://lore.kernel.org/linux-scsi/0c0bc528-fdc2-4106-bc99-f23ae377f6f5@linaro.org/ Fixes: 6bf999e ("scsi: ufs: core: Add UFS RTC support") Cc: Bean Huo <beanhuo@micron.com> Cc: stable@vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241031212632.2799127-1-bvanassche@acm.org Reviewed-by: Peter Wang <peter.wang@mediatek.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In unlikely event that we fail during sending the new VF GGTT configuration to the GuC, we will free only the GGTT node data struct but will miss to release the actual GGTT allocation. This will later lead to list corruption, GGTT space leak and finally risking crash when unloading the driver: [ ] ... [drm] GT0: PF: Failed to provision VF1 with 1073741824 (1.00 GiB) GGTT (-EIO) [ ] ... [drm] GT0: PF: VF1 provisioning remains at 0 (0 B) GGTT [ ] list_add corruption. next->prev should be prev (ffff88813cfcd628), but was 0000000000000000. (next=ffff88813cfe2028). [ ] RIP: 0010:__list_add_valid_or_report+0x6b/0xb0 [ ] Call Trace: [ ] drm_mm_insert_node_in_range+0x2c0/0x4e0 [ ] xe_ggtt_node_insert+0x46/0x70 [xe] [ ] pf_provision_vf_ggtt+0x7f5/0xa70 [xe] [ ] xe_gt_sriov_pf_config_set_ggtt+0x5e/0x770 [xe] [ ] ggtt_set+0x4b/0x70 [xe] [ ] simple_attr_write_xsigned.constprop.0.isra.0+0xb0/0x110 [ ] ... [drm] GT0: PF: Failed to provision VF1 with 1073741824 (1.00 GiB) GGTT (-ENOSPC) [ ] ... [drm] GT0: PF: VF1 provisioning remains at 0 (0 B) GGTT [ ] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b7b: 0000 [#1] PREEMPT SMP NOPTI [ ] RIP: 0010:drm_mm_remove_node+0x1b7/0x390 [ ] Call Trace: [ ] <TASK> [ ] ? die_addr+0x2e/0x80 [ ] ? exc_general_protection+0x1a1/0x3e0 [ ] ? asm_exc_general_protection+0x22/0x30 [ ] ? drm_mm_remove_node+0x1b7/0x390 [ ] ggtt_node_remove+0xa5/0xf0 [xe] [ ] xe_ggtt_node_remove+0x35/0x70 [xe] [ ] xe_ttm_bo_destroy+0x123/0x220 [xe] [ ] intel_user_framebuffer_destroy+0x44/0x70 [xe] [ ] intel_plane_destroy_state+0x3b/0xc0 [xe] [ ] drm_atomic_state_default_clear+0x1cd/0x2f0 [ ] intel_atomic_state_clear+0x9/0x20 [xe] [ ] __drm_atomic_state_free+0x1d/0xb0 Fix that by using pf_release_ggtt() on the error path, which now works regardless if the node has GGTT allocation or not. Fixes: 34e8042 ("drm/xe: Make xe_ggtt_node struct independent") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241104144901.1903-1-michal.wajdeczko@intel.com (cherry picked from commit 43b1dd2) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

vp_modern_avq_cleanup() and vp_del_vqs() clean up admin vq resources by virtio_pci_vq_info pointer. The info pointer of admin vq is stored in vp_dev->admin_vq.info instead of vp_dev->vqs[]. Using the info pointer from vp_dev->vqs[] for admin vq causes a kernel NULL pointer dereference bug. In vp_modern_avq_cleanup() and vp_del_vqs(), get the info pointer from vp_dev->admin_vq.info for admin vq to clean up the resources. Also make info ptr as argument of vp_del_vq() to be symmetric with vp_setup_vq(). vp_reset calls vp_modern_avq_cleanup, and causes the Call Trace: ================================================================== BUG: kernel NULL pointer dereference, address:0000000000000000 ... CPU: 49 UID: 0 PID: 4439 Comm: modprobe Not tainted 6.11.0-rc5 #1 RIP: 0010:vp_reset+0x57/0x90 [virtio_pci] Call Trace: <TASK> ... ? vp_reset+0x57/0x90 [virtio_pci] ? vp_reset+0x38/0x90 [virtio_pci] virtio_reset_device+0x1d/0x30 remove_vq_common+0x1c/0x1a0 [virtio_net] virtnet_remove+0xa1/0xc0 [virtio_net] virtio_dev_remove+0x46/0xa0 ... virtio_pci_driver_exit+0x14/0x810 [virtio_pci] ================================================================== Fixes: 4c3b54a ("virtio_pci_modern: use completion instead of busy loop to wait on admin cmd result") Signed-off-by: Feng Liu <feliu@nvidia.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Message-Id: <20241024135406.81388-1-feliu@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

In the error recovery path of mlx5_vdpa_dev_add(), the cleanup is executed and at the end put_device() is called which ends up calling mlx5_vdpa_free(). This function will execute the same cleanup all over again. Most resources support being cleaned up twice, but the recent mlx5_vdpa_destroy_mr_resources() doesn't. This change drops the explicit cleanup from within the mlx5_vdpa_dev_add() and lets mlx5_vdpa_free() do its work. This issue was discovered while trying to add 2 vdpa devices with the same name: $> vdpa dev add name vdpa-0 mgmtdev auxiliary/mlx5_core.sf.2 $> vdpa dev add name vdpa-0 mgmtdev auxiliary/mlx5_core.sf.3 ... yields the following dump: BUG: kernel NULL pointer dereference, address: 00000000000000b8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 4 UID: 0 PID: 2811 Comm: vdpa Not tainted 6.12.0-rc6 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:destroy_workqueue+0xe/0x2a0 Code: ... RSP: 0018:ffff88814920b9a8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888105c10000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff888100400168 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888100120c00 R09: ffffffff828578c0 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff888131fd99a0 R14: 0000000000000000 R15: ffff888105c10580 FS: 00007fdfa6b4f740(0000) GS:ffff88852ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000b8 CR3: 000000018db09006 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? destroy_workqueue+0xe/0x2a0 mlx5_vdpa_destroy_mr_resources+0x2b/0x40 [mlx5_vdpa] mlx5_vdpa_free+0x45/0x150 [mlx5_vdpa] vdpa_release_dev+0x1e/0x50 [vdpa] device_release+0x31/0x90 kobject_put+0x8d/0x230 mlx5_vdpa_dev_add+0x328/0x8b0 [mlx5_vdpa] vdpa_nl_cmd_dev_add_set_doit+0x2b8/0x4c0 [vdpa] genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x180/0x2b0 ? __vdpa_alloc_device+0x1b0/0x1b0 [vdpa] ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1fc/0x2d0 netlink_sendmsg+0x1e4/0x410 __sock_sendmsg+0x38/0x60 ? sockfd_lookup_light+0x12/0x60 __sys_sendto+0x105/0x160 ? __count_memcg_events+0x53/0xe0 ? handle_mm_fault+0x100/0x220 ? do_user_addr_fault+0x40d/0x620 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fdfa6c66b57 Code: ... RSP: 002b:00007ffeace22998 EFLAGS: 00000202 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055a498608350 RCX: 00007fdfa6c66b57 RDX: 000000000000006c RSI: 000055a498608350 RDI: 0000000000000003 RBP: 00007ffeace229c0 R08: 00007fdfa6d35200 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000202 R12: 000055a4986082a0 R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeace233f3 </TASK> Modules linked in: ... CR2: 00000000000000b8 Fixes: 6211165 ("vdpa/mlx5: Postpone MR deletion") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Message-Id: <20241105185101.1323272-2-dtatulea@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com>

Eric reported a division by zero splat in the MPTCP protocol: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 6094 Comm: syz-executor317 Not tainted 6.12.0-rc5-syzkaller-00291-g05b92660cdfe #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__tcp_select_window+0x5b4/0x1310 net/ipv4/tcp_output.c:3163 Code: f6 44 01 e3 89 df e8 9b 75 09 f8 44 39 f3 0f 8d 11 ff ff ff e8 0d 74 09 f8 45 89 f4 e9 04 ff ff ff e8 00 74 09 f8 44 89 f0 99 <f7> 7c 24 14 41 29 d6 45 89 f4 e9 ec fe ff ff e8 e8 73 09 f8 48 89 RSP: 0018:ffffc900041f7930 EFLAGS: 00010293 RAX: 0000000000017e67 RBX: 0000000000017e67 RCX: ffffffff8983314b RDX: 0000000000000000 RSI: ffffffff898331b0 RDI: 0000000000000004 RBP: 00000000005d6000 R08: 0000000000000004 R09: 0000000000017e67 R10: 0000000000003e80 R11: 0000000000000000 R12: 0000000000003e80 R13: ffff888031d9b440 R14: 0000000000017e67 R15: 00000000002eb000 FS: 00007feb5d7f16c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb5d8adbb8 CR3: 0000000074e4c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __tcp_cleanup_rbuf+0x3e7/0x4b0 net/ipv4/tcp.c:1493 mptcp_rcv_space_adjust net/mptcp/protocol.c:2085 [inline] mptcp_recvmsg+0x2156/0x2600 net/mptcp/protocol.c:2289 inet_recvmsg+0x469/0x6a0 net/ipv4/af_inet.c:885 sock_recvmsg_nosec net/socket.c:1051 [inline] sock_recvmsg+0x1b2/0x250 net/socket.c:1073 __sys_recvfrom+0x1a5/0x2e0 net/socket.c:2265 __do_sys_recvfrom net/socket.c:2283 [inline] __se_sys_recvfrom net/socket.c:2279 [inline] __x64_sys_recvfrom+0xe0/0x1c0 net/socket.c:2279 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7feb5d857559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007feb5d7f1208 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007feb5d8e1318 RCX: 00007feb5d857559 RDX: 000000800000000e RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007feb5d8e1310 R08: 0000000000000000 R09: ffffffff81000000 R10: 0000000000000100 R11: 0000000000000246 R12: 00007feb5d8e131c R13: 00007feb5d8ae074 R14: 000000800000000e R15: 00000000fffffdef and provided a nice reproducer. The root cause is the current bad handling of racing disconnect. After the blamed commit below, sk_wait_data() can return (with error) with the underlying socket disconnected and a zero rcv_mss. Catch the error and return without performing any additional operations on the current socket. Reported-by: Eric Dumazet <edumazet@google.com> Fixes: 419ce13 ("tcp: allow again tcp_disconnect() when threads are waiting") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/8c82ecf71662ecbc47bf390f9905de70884c9f2d.1731060874.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot and Daan report a NULL pointer crash in the new full swap cluster reclaim work: > Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI > KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] > CPU: 1 UID: 0 PID: 51 Comm: kworker/1:1 Not tainted 6.12.0-rc6-syzkaller #0 > Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 > Workqueue: events swap_reclaim_work > RIP: 0010:__list_del_entry_valid_or_report+0x20/0x1c0 lib/list_debug.c:49 > Code: 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 48 89 fe 48 83 c7 08 48 83 ec 18 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 19 01 00 00 48 89 f2 48 8b 4e 08 48 b8 00 00 00 > RSP: 0018:ffffc90000bb7c30 EFLAGS: 00010202 > RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff88807b9ae078 > RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000008 > RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 > R10: 0000000000000001 R11: 000000000000004f R12: dffffc0000000000 > R13: ffffffffffffffb8 R14: ffff88807b9ae000 R15: ffffc90003af1000 > FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00007fffaca68fb8 CR3: 00000000791c8000 CR4: 00000000003526f0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > Call Trace: > <TASK> > __list_del_entry_valid include/linux/list.h:124 [inline] > __list_del_entry include/linux/list.h:215 [inline] > list_move_tail include/linux/list.h:310 [inline] > swap_reclaim_full_clusters+0x109/0x460 mm/swapfile.c:748 > swap_reclaim_work+0x2e/0x40 mm/swapfile.c:779 The syzbot console output indicates a virtual environment where swapfile is on a rotational device. In this case, clusters aren't actually used, and si->full_clusters is not initialized. Daan's report is from qemu, so likely rotational too. Make sure to only schedule the cluster reclaim work when clusters are actually in use. Link: https://lkml.kernel.org/r/20241107142335.GB1172372@cmpxchg.org Link: https://lore.kernel.org/lkml/672ac50b.050a0220.2edce.1517.GAE@google.com/ Link: systemd/systemd#35044 Fixes: 5168a68 ("mm, swap: avoid over reclaim of full clusters") Reported-by: syzbot+078be8bfa863cb9e0c6b@syzkaller.appspotmail.com Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com> Cc: Kairui Song <ryncsn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The kdump kernel is broken on SME systems with CONFIG_IMA_KEXEC=y enabled. Debugging traced the issue back to b69a2af ("x86/kexec: Carry forward IMA measurement log on kexec"). Testing was previously not conducted on SME systems with CONFIG_IMA_KEXEC enabled, which led to the oversight, with the following incarnation: ... ima: No TPM chip found, activating TPM-bypass! Loading compiled-in module X.509 certificates Loaded X.509 cert 'Build time autogenerated kernel key: 18ae0bc7e79b64700122bb1d6a904b070fef2656' ima: Allocated hash algorithm: sha256 Oops: general protection fault, probably for non-canonical address 0xcfacfdfe6660003e: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc2+ torvalds#14 Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS 1.20.0 05/03/2023 RIP: 0010:ima_restore_measurement_list Call Trace: <TASK> ? show_trace_log_lvl ? show_trace_log_lvl ? ima_load_kexec_buffer ? __die_body.cold ? die_addr ? exc_general_protection ? asm_exc_general_protection ? ima_restore_measurement_list ? vprintk_emit ? ima_load_kexec_buffer ima_load_kexec_buffer ima_init ? __pfx_init_ima init_ima ? __pfx_init_ima do_one_initcall do_initcalls ? __pfx_kernel_init kernel_init_freeable kernel_init ret_from_fork ? __pfx_kernel_init ret_from_fork_asm </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- ... Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Rebooting in 10 seconds.. Adding debug printks showed that the stored addr and size of ima_kexec buffer are not decrypted correctly like: ima: ima_load_kexec_buffer, buffer:0xcfacfdfe6660003e, size:0xe48066052d5df359 Three types of setup_data info — SETUP_EFI, - SETUP_IMA, and - SETUP_RNG_SEED are passed to the kexec/kdump kernel. Only the ima_kexec buffer experienced incorrect decryption. Debugging identified a bug in early_memremap_is_setup_data(), where an incorrect range calculation occurred due to the len variable in struct setup_data ended up only representing the length of the data field, excluding the struct's size, and thus leading to miscalculation. Address a similar issue in memremap_is_setup_data() while at it. [ bp: Heavily massage. ] Fixes: b3c72fc ("x86/boot: Introduce setup_indirect") Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20240911081615.262202-3-bhe@redhat.com

Accessing `mr_table->mfc_cache_list` is protected by an RCU lock. In the following code flow, the RCU read lock is not held, causing the following error when `RCU_PROVE` is not held. The same problem might show up in the IPv6 code path. 6.12.0-rc5-kbuilder-01145-gbac17284bdcb torvalds#33 Tainted: G E N ----------------------------- net/ipv4/ipmr_base.c:313 RCU-list traversed in non-reader section!! rcu_scheduler_active = 2, debug_locks = 1 2 locks held by RetransmitAggre/3519: #0: ffff88816188c6c0 (nlk_cb_mutex-ROUTE){+.+.}-{3:3}, at: __netlink_dump_start+0x8a/0x290 #1: ffffffff83fcf7a8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_dumpit+0x6b/0x90 stack backtrace: lockdep_rcu_suspicious mr_table_dump ipmr_rtm_dumproute rtnl_dump_all rtnl_dumpit netlink_dump __netlink_dump_start rtnetlink_rcv_msg netlink_rcv_skb netlink_unicast netlink_sendmsg This is not a problem per see, since the RTNL lock is held here, so, it is safe to iterate in the list without the RCU read lock, as suggested by Eric. To alleviate the concern, modify the code to use list_for_each_entry_rcu() with the RTNL-held argument. The annotation will raise an error only if RTNL or RCU read lock are missing during iteration, signaling a legitimate problem, otherwise it will avoid this false positive. This will solve the IPv6 case as well, since ip6mr_rtm_dumproute() calls this function as well. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20241108-ipmr_rcu-v2-1-c718998e209b@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

kimphill and others added 30 commits January 29, 2015 19:56

powerpc/dts: Remove T4240 emulator support

e8d2081

Probably we should have not upstreamed this in the first place Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

powerpc: Remove duplicate tlbcam_index declarations

238cac1

They seem to be leftovers from '14cf11a powerpc: Merge enough to start building in arch/powerpc' Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

power/fsl: add MDIO dt binding for FMan

7f93c9d

This binding is for FMan MDIO, it covers FMan v2 & FMan v3. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> [scottwood@freescale.com: mark interrupts required only for external] Signed-off-by: Scott Wood <scottwood@freescale.com>

powerpc/8xx: Take benefit of aligned PGDIR

17bb312

L1 base address is now aligned so we can insert L1 index into r11 directly and then preserve r10 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>

powerpc/8xx: Remove duplicated code in set_context()

4545ff7

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>

powerpc: Add machine_check cpu function for e300c3 cpus

974ff4e

Signed-off-by: Esben Haabendal <eha@deif.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

powerpc/config: Enable MDIO support

cbe8c43

Also, enable Vitesse PHY and fixed PHY support. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

dt/bindings: b/qman: Fix the alloc-ranges in the example(s)

1ee9df4

'ranges' are specified as <base size> not as <start end> Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

dt/bindings: b/qman: Add phandle to the portals

7af98c7

This supports SoC(s) with multiple B/QMan instances Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>

powerpc: dts: pq3/85xx: Fix GPIO address

fd5f491

Fix the GPIO address in the device tree to match the documented location. Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <scottwood@freescale.com>

mpe pushed a commit that referenced this pull request Apr 2, 2023

Merge tag 'kvm-riscv-fixes-6.3-1' of https://github.com/kvm-riscv/linux…

9e347ba

… into HEAD KVM/riscv fixes for 6.3, take #1 - Fix VM hang in case of timer delta being zero

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Merge test into next #1

Merge test into next #1

mpe commented Feb 6, 2015

Merge test into next #1

Merge test into next #1

Conversation

mpe commented Feb 6, 2015