Ender-3 V2/S1 Professional Firmware 20230904 #1076
Replies: 31 comments 71 replies
-
|
Hi! Sorry for the long absence while I was traveling. Can I get a CVLM F4 build of 20230904 for testing when you get the chance, please? |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I will post it shortly! Thanks by sponsoring this project. |
Beta Was this translation helpful? Give feedback.
-
|
You are quite welcome! No rush on getting it posted; I'll give it a try later this week. I'm gonna be doing more work with the laser to solidify my process for turning designs into final cuts/engravings and look forward to giving octoprint laser jobs a try finally. 😎 |
Beta Was this translation helpful? Give feedback.
-
|
The new firmware is ready here: https://github.com/mriscoc/Special_Configurations/releases/tag/CVLM |
Beta Was this translation helpful? Give feedback.
-
|
Incredible work, congratulations |
Beta Was this translation helpful? Give feedback.
-
|
Hi, Mr. Mriscoc, thankyou for this awesome work! I have i problem, my Ender 3 v2, my lcd display is touch, off course its a shame, but i dont undertant about programming code, etc...i see many people on reddit using on skr mini e3 v3 one upgraded creality touch display like me, but on ender 5, not 3 creality printer. Escuse me for asking, but too many peaple have the touch display,and as like me, dont know if work or even how to pin on board or configure on marlin. Any advice to solution this? Thanks in advance, best regards from Brasil. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, sorry I don't support touch screens, I only have the former one with the encoder knob. |
Beta Was this translation helpful? Give feedback.
-
|
Awesome, thanks! |
Beta Was this translation helpful? Give feedback.
-
|
The previous versions had the JPEG display at 230x180. This firmware is 190x190. If I load a previously sliced file will it still display properly, display truncated or will it cause an issue and the file will no longer be printable ? I haven't updated yet but I want to be aware of what I am getting into before I make the leap :) |
Beta Was this translation helpful? Give feedback.
-
|
The 190x190 requirement is only for compatibility with TJC displays, these displays need a square thumbnail. Other displays, such as DWIN, can still use the 230x180 image size like any other size that fits on the screen. |
Beta Was this translation helpful? Give feedback.
-
|
Thank you...I must have missed that in the documentation....I am running my Ender 3 v2 with full stock hardware. The only update I have done is your firmware...older version installed currently. |
Beta Was this translation helpful? Give feedback.
-
|
howdy! I'm looking forward to using your ui, but I'm trying to use it on my ender3_v2 with a 4.2.7 board which is mostly normal except i have a 400x400x500 build space and a prob...I could only locate the source code for the 4.2.2 board... is the source code for the 4.2.7 board in the works? Update! I realize I can just edit that from the Home Screen! thanks! |
Beta Was this translation helpful? Give feedback.
-
|
Advanced / Physical Settings, and also I recommend to use https://github.com/mriscoc/Ender3V2S1/wiki/Configuration-files |
Beta Was this translation helpful? Give feedback.
-
|
Awesome, just a newbie question…where do I implement the G-Code? I got my printer working by changing the bed parameters from the printer screen (and it prints using all 400x400), but when I try to make a bed mesh, it only probes the 220x220 of the original bed size…what do I need to fix? |
Beta Was this translation helpful? Give feedback.
-
|
https://github.com/mriscoc/Ender3V2S1/wiki/Calibration-Guides |
Beta Was this translation helpful? Give feedback.
-
|
You have to go though the config page. It explains how to reset your mesh max and center Thanks,RoyOn Sep 17, 2023, at 11:30 AM, Supermac05 ***@***.***> wrote:
Awesome, just a newbie question…where do I implement the G-Code? I got my printer working by changing the bed parameters from the printer screen (and it prints using all 400x400), but when I try to make a bed mesh, it only probes the 220x220 of the original bed size…what do I need to fix?
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Ok, so I simply put what Gcode I want on the SD card, and flash it to my printer? |
Beta Was this translation helpful? Give feedback.
-
|
I'm running into an issue with the thumbnails with Cura 5.4.0 and Ender3v2. Anyone has an advice? May be I shouldn't have updated the python script, I'll try to revert. |
Beta Was this translation helpful? Give feedback.
-
The problem is in the image itself, seems like there is missing a light or the filament color is black. It is not a problem with the display or firmware.
With increased brightness: |
Beta Was this translation helpful? Give feedback.
-
|
Ok I see, the two lines I thought I was seeing was the white blob at the bottom. This is a silver filament and rendered silver in Cura. I'm going to uninstall and reinstall Cura since something went wrong when I updated the script. I'll let you know. |
Beta Was this translation helpful? Give feedback.
-
|
Perhaps the silver material is simply reflecting the black environment. |
Beta Was this translation helpful? Give feedback.
-
|
Whatever filament color I use (red, blue, orange, green), I always get the same result... So it might be a light issue as you said. |
Beta Was this translation helpful? Give feedback.
-
|
After reinstalling Cura everything works including the new thumbnail script. Black or silver filaments display without an issue on the stock screen and latest firmware. |
Beta Was this translation helpful? Give feedback.
-
|
Hello mriscoc, I had a few question regarding the latest UBL firmware
I would appreciate any help to solve these issues and I apologize if my following issues have been addressed within your documentation. Thanks! |
Beta Was this translation helpful? Give feedback.
-
|
Please check note 2 at: https://github.com/mriscoc/Ender3V2S1/releases |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for your response, Regarding note2, would I be able to change |
Beta Was this translation helpful? Give feedback.
-
|
By custom compile you can enable/disable as many features as program memory your SoC supports. Free support for custom builds is currently restricted due to lack of free time. |
Beta Was this translation helpful? Give feedback.
-
|
Installed latest (sommer 2023) official version of the software for mine Ender S1 F104 - it works. |
Beta Was this translation helpful? Give feedback.
-
|
Sorry, let me repeat in different way. I had followed all the steps to install the official firmware updates from the Creality site - it is 2023 update. Works fine. I used the last official updates for the S1 F104. |
Beta Was this translation helpful? Give feedback.
-
|
Could be a display firmware compatibility issue: #966 |
Beta Was this translation helpful? Give feedback.
-
|
Downgrading works perfect. My steps (for Ender 3 S1):
|
Beta Was this translation helpful? Give feedback.
-
|
fair to say, I'm not sure if you could just install mriscoc firmware after the official 2023 and just downgrade the screen. |
Beta Was this translation helpful? Give feedback.
-
|
I have the same problem and I cannot install the professional software again, the screen freezes. and then I can only install the initial software from Creality. |
Beta Was this translation helpful? Give feedback.
-
|
As a newbie, I accidentally installed the latest Ender3V2-422-BLTUBL version instead of the MM version. After I realized the difference, I downloaded the correct MM version to the SD card, but as my printer restarted, it ignored the firmware installation and still showed the BLTUBL version. |
Beta Was this translation helpful? Give feedback.
-
|
I just figured it out! |
Beta Was this translation helpful? Give feedback.
-
|
Hello Mriscoc, is it possible to use this FW on a 4.2.2 board with GD32F303 chip? I have an Ender3v2 with 4.2.2 board with GD CPU. If the answer is no is there any alternative? Thank you |
Beta Was this translation helpful? Give feedback.
-
|
Check previous issues and discussions: #235 |
Beta Was this translation helpful? Give feedback.
-
|
working fine for me and my GD chip! |
Beta Was this translation helpful? Give feedback.
-
|
I'm loving this firmware. Fairly new to printing and when my Neo heat block stripped, I installed Hero Me in order to fit an upgraded hotend. This firmware takes all the gcode fiddling out of it and between the built in screen and octoprint, makes using an upgraded Ender so much easier to tune. I have to admit, I've been checking in every day this month looking for October's release. Anything new on the horizon? |
Beta Was this translation helpful? Give feedback.
-
|
I see the professionalfirmware is pip but CreateHeaderAndThumbnail is pip3... could that be it? |
Beta Was this translation helpful? Give feedback.
-
|
So I clicked scan files in the slicer thumbnails plugin and got the image, sweet. Now gotta figure out broken arc-welding but I'm printing so it will have to be later. |
Beta Was this translation helpful? Give feedback.
-
|
If you install the professionalfirmware script you should remove the CreateJPEGThumbnail script because the professionalfirmware script already generates the preview image. Separate the scripts with ; and a new line |
Beta Was this translation helpful? Give feedback.
-
|
Hope this isn't too stupid of a question, but with AML enabled, there is no longer a need or ability to manually set z-offset? |
Beta Was this translation helpful? Give feedback.
-
|
No, a proper Probe Z-offset is an important step in printer calibration. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, first off thanks for your work on the firmware :) |
Beta Was this translation helpful? Give feedback.
-
|
new SD card/format and changing firmware filename are the usual ways to successfully installing the new firmware. |
Beta Was this translation helpful? Give feedback.
-
|
Try a really short, unique file name. Like 123 or mrneo |
Beta Was this translation helpful? Give feedback.
-
|
Hey, first off thanks for your reply :), so I have still been playing around with this trying to get it to work, but I just can not get it to work. for clarity, i have an Ender 3 v2 neo running totally stock any one manage to update their neo? anyone managed to use a TJC screen many thanks |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
First time back since last year and this version is even better than before!! Thank you for all your hard work sir! |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for this, I tried for months to get my sprite pro upgrade to my ender 3 v2 to work but this solved it. One question though I can create a manual mesh via the display but my previous g29 code in print startup no longer works do you know why this would be I feel like I'm missing something obvious but I just can't get it to ABL before the print anymore? |
Beta Was this translation helpful? Give feedback.
-
|
Verify that you are using an ABL and not a UBL firmware. UBL firmware needs |
Beta Was this translation helpful? Give feedback.
-
|
Hello, first of all thank you for your work with the firmware. |
Beta Was this translation helpful? Give feedback.
-
|
Hello, thanks for the hard work to develop this firmware. I seem to be having problems updating my S1 with the F4 chip and DACAI screen. Had an earlier version that worked fine but now it will only boot to a black screen. Any Ideas? Updated both the screen and main board as per instruction. After many failed attempts I updated to stock firmware and seems to work but still can't switch to Professional firmware. Any possible solutions to this problem? |
Beta Was this translation helpful? Give feedback.
-
|
Maybe related to: #966 |
Beta Was this translation helpful? Give feedback.
-
|
Hello all. Maybe a newbie question, but I recently purchased an Ender 3 S1 (3.0.3 stock firmware) and overall it prints decently. I did confirm I have the F4 chip and was looking to see if there is new firmware out there to migrate to even help printing more. Obviously off the Creality site I found there's a 3.0.4 and then even newer ones based off Merlin, but searching around I also found these professional firmware upgrades as well. So question as a new 3d printer user - would you recommend moving to these Pro Firmwares (i.e the Sept 23 F04 edition) for some major benefits or better printing quality? (Or would you recommend sticking with Creality supplied firmware, or not even upgrade at all?) I saw in one post that it said that due to the lack of memory space some features are disabled in the migration to the Pro firmware - has anyone noticed a large impact from this? Thanks again - like I saw - still somewhat new to 3d printing with Creality but thought if there are some major opportunities in an upgrade to get better printing/better features, I might as well make the move. Thanks in advance to any opinions..... Bob |
Beta Was this translation helpful? Give feedback.
-
|
Hi All |
Beta Was this translation helpful? Give feedback.
-
|
You need a customized version. |
Beta Was this translation helpful? Give feedback.
-
|
Thank you. Where can I get it and what will the cost be? |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
sorry if i sound rude or unappreciative iv been working on and off with it for over a month and about rdy to go back to Default crealty everything.. everything online all forums almost every video bring me here for firmware Ender-3V2 Skr mini e3 V3 the compiling allways have a ton of errors marlen dont match configs or vice vs |
Beta Was this translation helpful? Give feedback.
-
|
Please read the firmware documentation, touch screens are not supported: |
Beta Was this translation helpful? Give feedback.
-
|
I have the same problem. vscode doesn't want to compile. And no, I don't have a touch screen. The pre compiled file for the skr mini E3 V3 works, but is for an standard hotend and I think doesn't have all the cool features. |
Beta Was this translation helpful? Give feedback.
-
|
do u have the {ender3v2-skrme3v3-bltubl-t13-la-mpc.bin} Zip files or source files before you compiled them |
Beta Was this translation helpful? Give feedback.
-
|
I would love to have a pre compiled version of this, Ender3v2-skr-mini-E3V3-BltUbl-T13-Homeoffs-La-Is-Mpc.bin |
Beta Was this translation helpful? Give feedback.
-
|
Hi I am new to all this 3D printing stuff, I like 3D printing because although I am disabled I can do it. unfortunately not everything. I tried to compile a custom .bin file for my printer, but no succes. I don't get it, and my special computer can't help me with it. |
Beta Was this translation helpful? Give feedback.
-
|
Hi mriscoc, again - really appreciate your work and the firmware you created is much better than the stock firmware. |
Beta Was this translation helpful? Give feedback.
-
|
Verify in the Control/Info page that you are using a TJC version firmware. |
Beta Was this translation helpful? Give feedback.
-
|
Not sure, I didn't get that far to build my own SW yet and used [Ender3V2-427-BLTUBL-MPC-20230904.bin] V2.1.3 official build. Nothing mentioned about any display on the info screen. I guess last time you provided a dedicated build for the TJC display - this is probably the issue here. But thanks for your kind and quick response. |
Beta Was this translation helpful? Give feedback.
-
|
You can download TJC versions from here: https://github.com/mriscoc/Special_Configurations/releases/tag/tjc |
Beta Was this translation helpful? Give feedback.
-
|
If you like circles more, you can change the mesh viewer to circle mode by sending C29 V0, or to return to squares C29 V1 |
Beta Was this translation helpful? Give feedback.
-
|
Thanks, this is exactly what I was looking for. I looked into the section for the TJC yesterday but for some reason I didn't see this firmware. Thank you so much for your kind support and the great work you do. The only thing which didn't work for me is the thumbnail. I installed the script and enabled it in Cura with resolution 180x180 as mentioned. It doesn't come back with an error saying that the resolution isn't correct. Seems to load for some time but just doesn't show anything. Even the testfile which you provided doesn't show a thumbnail. But to be honest, it's just a nice to have for me. Might need some TJC firmware upgrade but not sure. Can leave it as it is. Your firmware ist just working great - absolute outstanding :-) |
Beta Was this translation helpful? Give feedback.
-
|
Let me see if I can get this right this time. |
Beta Was this translation helpful? Give feedback.
-
|
Display firmwares (like dacai_update) must be uncompressed and copied to the root of the µSD card, then turn off the printer and put the card inside of the display unit, then turn on the printer for start the update process. |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for your support. |
Beta Was this translation helpful? Give feedback.
-
|
Hi. Is this profess formware available for Creality Ender 3 V3 SE? I am planning to buy new printer but not ready to stop using the Professional Firmware. |
Beta Was this translation helpful? Give feedback.
-
|
Sorry but no, I don't have access to that printer. |
Beta Was this translation helpful? Give feedback.
-
|
Hi the Software is just amazing. I changed to klipper Software but after a week I reinstalled MRISCOC.
|
Beta Was this translation helpful? Give feedback.
-
|
Hi, if you compile your custom version, use the special configuration repository to get the configurator and associated files and the main repository, more info: https://github.com/mriscoc/Special_Configurations#creating-your-own-custom-configuration |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for your great support.
DocPaul
… On Nov 24, 2023, at 8:01 PM, Miguel Risco-Castillo ***@***.***> wrote:
Hi, if you compile your custom version, use the special configuration repository to get the configurator and associated files and the main repository, more info: https://github.com/mriscoc/Special_Configurations
—
Reply to this email directly, view it on GitHub <#1076 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BEE6WHE63L3X4HSVJXQFZBTYGE7NJAVCNFSM6AAAAAA4KVDJIWVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TMNRUGI4DG>.
You are receiving this because you commented.
|
Beta Was this translation helpful? Give feedback.
-
|
Hi, Complete noob to this so apologies if it is something stupid i'm doing. I've followed the steps labeled out, i have a E3V2Neo, attempting to install the Ender3V2-422-BLTUBL-MPC-20230904 firmware (checked board V4.2.2) but i keep getting stuck on the Creality screen. I can revert back to the Creality firmware and it works but can't seem to get this to load on. I have installed a sprite pro kit and have dual z axis motors installed (not sure if this affects it) |
Beta Was this translation helpful? Give feedback.
-
|
You must check if it is a problem with the printer's control board or with the display unit. Some displays have a firmware that is incompatible. So, try connecting the printer to a PC via USB and control it with Pronterface, if the printer responds to serial commands, there is a problem with the display unit and maybe this can helps: #966 |
Beta Was this translation helpful? Give feedback.
-
|
hello mriscoc |
Beta Was this translation helpful? Give feedback.
-
|
I removed it from the 20230904 release because now there is a 422 BLT in the latest 20231202 release. |
Beta Was this translation helpful? Give feedback.
-
|
Sorry for the newbie question, I am looking for 427 with bl touch for ender 3 v2. In the asset section of the release I can only see links to 422 binaries. Where can I get 427 versions? |
Beta Was this translation helpful? Give feedback.
-
|
https://github.com/mriscoc/Special_Configurations/releases/tag/demo |
Beta Was this translation helpful? Give feedback.
and others
-
SEPTEMBER 2023
What's new in this release
Donations
Thank you for your support, I receive donations through Patreon and Paypal
Beta Was this translation helpful? Give feedback.
All reactions