fix devicetree overlay for mcp2515 #2

msperl · 2015-04-17T16:58:54Z

See this pull request:
raspberrypi#933

[ Upstream commit c5a94f4 ] It was observed that a process blocked indefintely in __fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP to be cleared via fscache_wait_for_deferred_lookup(). At this time, ->backing_objects was empty, which would normaly prevent __fscache_read_or_alloc_page() from getting to the point of waiting. This implies that ->backing_objects was cleared *after* __fscache_read_or_alloc_page was was entered. When an object is "killed" and then "dropped", FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is ->backing_objects cleared. This leaves a window where something else can set FSCACHE_COOKIE_LOOKING_UP and __fscache_read_or_alloc_page() can start waiting, before ->backing_objects is cleared There is some uncertainty in this analysis, but it seems to be fit the observations. Adding the wake in this patch will be handled correctly by __fscache_read_or_alloc_page(), as it checks if ->backing_objects is empty again, after waiting. Customer which reported the hang, also report that the hang cannot be reproduced with this fix. The backtrace for the blocked process looked like: PID: 29360 TASK: ffff881ff2ac0f80 CPU: 3 COMMAND: "zsh" #0 [ffff881ff43efbf8] schedule at ffffffff815e56f1 #1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed #2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8 #3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e #4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache] #5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache] #6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs] #7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs] #8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73 #9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs] #10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756 #11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa #12 [ffff881ff43eff18] sys_read at ffffffff811fda62 #13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit e58725d upstream. UBIFS's recovery code strictly assumes that a deleted inode will never come back, therefore it removes all data which belongs to that inode as soon it faces an inode with link count 0 in the replay list. Before O_TMPFILE this assumption was perfectly fine. With O_TMPFILE it can lead to data loss upon a power-cut. Consider a journal with entries like: 0: inode X (nlink = 0) /* O_TMPFILE was created */ 1: data for inode X /* Someone writes to the temp file */ 2: inode X (nlink = 0) /* inode was changed, xattr, chmod, … */ 3: inode X (nlink = 1) /* inode was re-linked via linkat() */ Upon replay of entry #2 UBIFS will drop all data that belongs to inode X, this will lead to an empty file after mounting. As solution for this problem, scan the replay list for a re-link entry before dropping data. Fixes: 474b937 ("ubifs: Implement O_TMPFILE") Cc: stable@vger.kernel.org # 4.9-4.18 Cc: Russell Senior <russell@personaltelco.net> Cc: Rafał Miłecki <zajec5@gmail.com> Reported-by: Russell Senior <russell@personaltelco.net> Reported-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Richard Weinberger <richard@nod.at> [rmilecki: update ubifs_assert() calls to compile with 4.18 and older] Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit e58725d) Signed-off-by: Sasha Levin <sashal@kernel.org>

This patch modified test_btf pretty print test to cover the bitfield with struct member equal to or greater 256. Without the previous kernel patch fix, the modified test will fail: $ test_btf -p ...... BTF pretty print array(#1)......unexpected pprint output expected: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x1} read: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x0} BTF pretty print array(#2)......unexpected pprint output expected: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x1} read: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x0} PASS:6 SKIP:0 FAIL:2 With the kernel fix, the modified test will succeed: $ test_btf -p ...... BTF pretty print array(#1)......OK BTF pretty print array(#2)......OK PASS:8 SKIP:0 FAIL:0 Fixes: 9d5f9f7 ("bpf: btf: fix struct/union/fwd types with kind_flag") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Yonghong Song says: ==================== The previous BTF kind_flag support patch set introduced a bug for kernel bpffs pretty printing and another bug for bpftool map pretty printing. If a bitfield struct member offset is greater than 256 bits, printed value for that struct member will be incorrect. - Patch #1 fixed the bug in kernel bpffs pretty printing. - Patch #2 enhanced the test_btf test case to cover the issue exposed by patch #1. - Patch #3 fixed the bug in bpftool map pretty printing. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Taehee Yoo says: ==================== net: bpfilter: fix two bugs in bpfilter This patches fix two bugs in the bpfilter_umh which are related in iptables command. The first patch adds an exit code for UMH process. This provides an opportunity to cleanup members of the umh_info to modules which use the UMH. In order to identify UMH processes, a new flag PF_UMH is added. The second patch makes the bpfilter_umh use UMH cleanup callback. The third patch adds re-start routine for the bpfilter_umh. The bpfilter_umh does not re-start after error occurred. because there is no re-start routine in the module. The fourth patch ensures that the bpfilter.ko module will not removed while it's being used. The bpfilter.ko is not protected by locks or module reference counter. Therefore that can be removed while module is being used. In order to protect that, mutex is used. The first and second patch are preparation patches for the third and fourth patch. TEST #1 while : do modprobe bpfilter kill -9 <pid of the bpfilter_umh> iptables -vnL done TEST #2 while : do iptables -I FORWARD -m string --string ap --algo kmp & iptables -F & modprobe -rv bpfilter & done TEST #3 while : do modprobe bpfilter & modprobe -rv bpfilter & done The TEST1 makes a failure of iptables command. This is fixed by the third patch. The TEST2 makes a panic because of a race condition in the bpfilter_umh module. This is fixed by the fourth patch. The TEST3 makes a double-create UMH process. This is fixed by the third and fourth patch. v4 : - declare the exit_umh() as static inline - check stop flag in the load_umh() to avoid a double-create UMH v3 : - Avoid unnecessary list lookup for non-UMH processes - Add a new PF_UMH flag v2 : add the first and second patch v1 : Initial patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot reports following splat: BUG: KMSAN: uninit-value in strlen+0x3b/0xa0 lib/string.c:486 CPU: 1 PID: 11057 Comm: syz-executor0 Not tainted 4.20.0-rc7+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:295 strlen+0x3b/0xa0 lib/string.c:486 nla_put_string include/net/netlink.h:1154 [inline] tipc_nl_compat_link_reset_stats+0x1f0/0x360 net/tipc/netlink_compat.c:760 __tipc_nl_compat_doit net/tipc/netlink_compat.c:311 [inline] tipc_nl_compat_doit+0x3aa/0xaf0 net/tipc/netlink_compat.c:344 tipc_nl_compat_handle net/tipc/netlink_compat.c:1107 [inline] tipc_nl_compat_recv+0x14d7/0x2760 net/tipc/netlink_compat.c:1210 genl_family_rcv_msg net/netlink/genetlink.c:601 [inline] genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626 netlink_rcv_skb+0x444/0x640 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:637 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0xf40/0x1020 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116 __sys_sendmsg net/socket.c:2154 [inline] __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2161 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x457ec9 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f2557338c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457ec9 RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f25573396d4 R13: 00000000004cb478 R14: 00000000004d86c8 R15: 00000000ffffffff Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2759 [inline] __kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383 __kmalloc_reserve net/core/skbuff.c:137 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:205 alloc_skb include/linux/skbuff.h:998 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline] netlink_sendmsg+0xb82/0x1300 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116 __sys_sendmsg net/socket.c:2154 [inline] __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2161 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 The uninitialised access happened in tipc_nl_compat_link_reset_stats: nla_put_string(skb, TIPC_NLA_LINK_NAME, name) This is because name string is not validated before it's used. Reported-by: syzbot+e01d94b5a4c266be6e4c@syzkaller.appspotmail.com Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot reports following splat: BUG: KMSAN: uninit-value in strlen+0x3b/0xa0 lib/string.c:486 CPU: 1 PID: 9306 Comm: syz-executor172 Not tainted 4.20.0-rc7+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 strlen+0x3b/0xa0 lib/string.c:486 nla_put_string include/net/netlink.h:1154 [inline] __tipc_nl_compat_link_set net/tipc/netlink_compat.c:708 [inline] tipc_nl_compat_link_set+0x929/0x1220 net/tipc/netlink_compat.c:744 __tipc_nl_compat_doit net/tipc/netlink_compat.c:311 [inline] tipc_nl_compat_doit+0x3aa/0xaf0 net/tipc/netlink_compat.c:344 tipc_nl_compat_handle net/tipc/netlink_compat.c:1107 [inline] tipc_nl_compat_recv+0x14d7/0x2760 net/tipc/netlink_compat.c:1210 genl_family_rcv_msg net/netlink/genetlink.c:601 [inline] genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626 netlink_rcv_skb+0x444/0x640 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:637 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0xf40/0x1020 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116 __sys_sendmsg net/socket.c:2154 [inline] __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2161 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 The uninitialised access happened in nla_put_string(skb, TIPC_NLA_LINK_NAME, lc->name) This is because lc->name string is not validated before it's used. Reported-by: syzbot+d78b8a29241a195aefb8@syzkaller.appspotmail.com Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says: ==================== mlxsw: Various fixes This patchset contains small fixes in mlxsw and one fix in the bridge driver. Patches #1-#4 perform small adjustments in PCI and FID code following recent tests that were performed on the Spectrum-2 ASIC. Patch #5 fixes the bridge driver to mark FDB entries that were added by user as such. Otherwise, these entries will be ignored by underlying switch drivers. Patch #6 fixes a long standing issue in mlxsw where the driver incorrectly programmed static FDB entries as both static and sticky. Patches #7-#8 add test cases for above mentioned bugs. Please consider patches #1, #2 and #4 for stable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

[ Upstream commit d63967e ] Since capi_ioctl() copies 64 bytes after calling capi20_get_manufacturer() we need to ensure to not leak information to user. BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 CPU: 0 PID: 11245 Comm: syz-executor633 Not tainted 4.20.0-rc7+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 kmsan_internal_check_memory+0x9d4/0xb00 mm/kmsan/kmsan.c:704 kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601 _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 capi_ioctl include/linux/uaccess.h:177 [inline] capi_unlocked_ioctl+0x1a0b/0x1bf0 drivers/isdn/capi/capi.c:939 do_vfs_ioctl+0xebd/0x2bf0 fs/ioctl.c:46 ksys_ioctl fs/ioctl.c:713 [inline] __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl+0x1da/0x270 fs/ioctl.c:718 __x64_sys_ioctl+0x4a/0x70 fs/ioctl.c:718 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x440019 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdd4659fb8 EFLAGS: 00000213 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440019 RDX: 0000000020000080 RSI: 00000000c0044306 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8 R10: 0000000000000000 R11: 0000000000000213 R12: 00000000004018a0 R13: 0000000000401930 R14: 0000000000000000 R15: 0000000000000000 Local variable description: ----data.i@capi_unlocked_ioctl Variable was created at: capi_ioctl drivers/isdn/capi/capi.c:747 [inline] capi_unlocked_ioctl+0x82/0x1bf0 drivers/isdn/capi/capi.c:939 do_vfs_ioctl+0xebd/0x2bf0 fs/ioctl.c:46 Bytes 12-63 of 64 are uninitialized Memory access of size 64 starts at ffff88807ac5fce8 Data copied to user address 0000000020000080 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…er shutdown commit 60a161b upstream. Suppose adapter (open) recovery is between opened QDIO queues and before (the end of) initial posting of status read buffers (SRBs). This time window can be seconds long due to FSF_PROT_HOST_CONNECTION_INITIALIZING causing by design looping with exponential increase sleeps in the function performing exchange config data during recovery [zfcp_erp_adapter_strat_fsf_xconf()]. Recovery triggered by local link up. Suppose an event occurs for which the FCP channel would send an unsolicited notification to zfcp by means of a previously posted SRB. We saw it with local cable pull (link down) in multi-initiator zoning with multiple NPIV-enabled subchannels of the same shared FCP channel. As soon as zfcp_erp_adapter_strategy_open_fsf() starts posting the initial status read buffers from within the adapter's ERP thread, the channel does send an unsolicited notification. Since v2.6.27 commit d26ab06 ("[SCSI] zfcp: receiving an unsolicted status can lead to I/O stall"), zfcp_fsf_status_read_handler() schedules adapter->stat_work to re-fill the just consumed SRB from a work item. Now the ERP thread and the work item post SRBs in parallel. Both contexts call the helper function zfcp_status_read_refill(). The tracking of missing (to be posted / re-filled) SRBs is not thread-safe due to separate atomic_read() and atomic_dec(), in order to depend on posting success. Hence, both contexts can see atomic_read(&adapter->stat_miss) == 1. One of the two contexts posts one too many SRB. Zfcp gets QDIO_ERROR_SLSB_STATE on the output queue (trace tag "qdireq1") leading to zfcp_erp_adapter_shutdown() in zfcp_qdio_handler_error(). An obvious and seemingly clean fix would be to schedule stat_work from the ERP thread and wait for it to finish. This would serialize all SRB re-fills. However, we already have another work item wait on the ERP thread: adapter->scan_work runs zfcp_fc_scan_ports() which calls zfcp_fc_eval_gpn_ft(). The latter calls zfcp_erp_wait() to wait for all the open port recoveries during zfcp auto port scan, but in fact it waits for any pending recovery including an adapter recovery. This approach leads to a deadlock. [see also v3.19 commit 18f87a6 ("zfcp: auto port scan resiliency"); v2.6.37 commit d3e1088 ("[SCSI] zfcp: No ERP escalation on gpn_ft eval"); v2.6.28 commit fca55b6 ("[SCSI] zfcp: fix deadlock between wq triggered port scan and ERP") fixing v2.6.27 commit c57a39a ("[SCSI] zfcp: wait until adapter is finished with ERP during auto-port"); v2.6.27 commit cc8c282 ("[SCSI] zfcp: Automatically attach remote ports")] Instead make the accounting of missing SRBs atomic for parallel execution in both the ERP thread and adapter->stat_work. Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: d26ab06 ("[SCSI] zfcp: receiving an unsolicted status can lead to I/O stall") Cc: <stable@vger.kernel.org> #2.6.27+ Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8b66fee upstream. syzbot reports following splat: BUG: KMSAN: uninit-value in strlen+0x3b/0xa0 lib/string.c:486 CPU: 1 PID: 11057 Comm: syz-executor0 Not tainted 4.20.0-rc7+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:295 strlen+0x3b/0xa0 lib/string.c:486 nla_put_string include/net/netlink.h:1154 [inline] tipc_nl_compat_link_reset_stats+0x1f0/0x360 net/tipc/netlink_compat.c:760 __tipc_nl_compat_doit net/tipc/netlink_compat.c:311 [inline] tipc_nl_compat_doit+0x3aa/0xaf0 net/tipc/netlink_compat.c:344 tipc_nl_compat_handle net/tipc/netlink_compat.c:1107 [inline] tipc_nl_compat_recv+0x14d7/0x2760 net/tipc/netlink_compat.c:1210 genl_family_rcv_msg net/netlink/genetlink.c:601 [inline] genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626 netlink_rcv_skb+0x444/0x640 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:637 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0xf40/0x1020 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116 __sys_sendmsg net/socket.c:2154 [inline] __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2161 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x457ec9 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f2557338c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457ec9 RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f25573396d4 R13: 00000000004cb478 R14: 00000000004d86c8 R15: 00000000ffffffff Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2759 [inline] __kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383 __kmalloc_reserve net/core/skbuff.c:137 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:205 alloc_skb include/linux/skbuff.h:998 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline] netlink_sendmsg+0xb82/0x1300 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116 __sys_sendmsg net/socket.c:2154 [inline] __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2161 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 The uninitialised access happened in tipc_nl_compat_link_reset_stats: nla_put_string(skb, TIPC_NLA_LINK_NAME, name) This is because name string is not validated before it's used. Reported-by: syzbot+e01d94b5a4c266be6e4c@syzkaller.appspotmail.com Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit edf5ff0 upstream. syzbot reports following splat: BUG: KMSAN: uninit-value in strlen+0x3b/0xa0 lib/string.c:486 CPU: 1 PID: 9306 Comm: syz-executor172 Not tainted 4.20.0-rc7+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 strlen+0x3b/0xa0 lib/string.c:486 nla_put_string include/net/netlink.h:1154 [inline] __tipc_nl_compat_link_set net/tipc/netlink_compat.c:708 [inline] tipc_nl_compat_link_set+0x929/0x1220 net/tipc/netlink_compat.c:744 __tipc_nl_compat_doit net/tipc/netlink_compat.c:311 [inline] tipc_nl_compat_doit+0x3aa/0xaf0 net/tipc/netlink_compat.c:344 tipc_nl_compat_handle net/tipc/netlink_compat.c:1107 [inline] tipc_nl_compat_recv+0x14d7/0x2760 net/tipc/netlink_compat.c:1210 genl_family_rcv_msg net/netlink/genetlink.c:601 [inline] genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626 netlink_rcv_skb+0x444/0x640 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:637 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0xf40/0x1020 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116 __sys_sendmsg net/socket.c:2154 [inline] __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2161 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 The uninitialised access happened in nla_put_string(skb, TIPC_NLA_LINK_NAME, lc->name) This is because lc->name string is not validated before it's used. Reported-by: syzbot+d78b8a29241a195aefb8@syzkaller.appspotmail.com Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4f4b374 ] This is the much more correct fix for my earlier attempt at: https://lkml.org/lkml/2018/12/10/118 Short recap: - There's not actually a locking issue, it's just lockdep being a bit too eager to complain about a possible deadlock. - Contrary to what I claimed the real problem is recursion on kn->count. Greg pointed me at sysfs_break_active_protection(), used by the scsi subsystem to allow a sysfs file to unbind itself. That would be a real deadlock, which isn't what's happening here. Also, breaking the active protection means we'd need to manually handle all the lifetime fun. - With Rafael we discussed the task_work approach, which kinda works, but has two downsides: It's a functional change for a lockdep annotation issue, and it won't work for the bind file (which needs to get the errno from the driver load function back to userspace). - Greg also asked why this never showed up: To hit this you need to unregister a 2nd driver from the unload code of your first driver. I guess only gpus do that. The bug has always been there, but only with a recent patch series did we add more locks so that lockdep built a chain from unbinding the snd-hda driver to the acpi_video_unregister call. Full lockdep splat: [12301.898799] ============================================ [12301.898805] WARNING: possible recursive locking detected [12301.898811] 4.20.0-rc7+ raspberrypi#84 Not tainted [12301.898815] -------------------------------------------- [12301.898821] bash/5297 is trying to acquire lock: [12301.898826] 00000000f61c6093 (kn->count#39){++++}, at: kernfs_remove_by_name_ns+0x3b/0x80 [12301.898841] but task is already holding lock: [12301.898847] 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190 [12301.898856] other info that might help us debug this: [12301.898862] Possible unsafe locking scenario: [12301.898867] CPU0 [12301.898870] ---- [12301.898874] lock(kn->count#39); [12301.898879] lock(kn->count#39); [12301.898883] *** DEADLOCK *** [12301.898891] May be due to missing lock nesting notation [12301.898899] 5 locks held by bash/5297: [12301.898903] #0: 00000000cd800e54 (sb_writers#4){.+.+}, at: vfs_write+0x17f/0x1b0 [12301.898915] #1: 000000000465e7c2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xd3/0x190 [12301.898925] #2: 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190 [12301.898936] #3: 00000000414ef7ac (&dev->mutex){....}, at: device_release_driver_internal+0x34/0x240 [12301.898950] #4: 000000003218fbdf (register_count_mutex){+.+.}, at: acpi_video_unregister+0xe/0x40 [12301.898960] stack backtrace: [12301.898968] CPU: 1 PID: 5297 Comm: bash Not tainted 4.20.0-rc7+ raspberrypi#84 [12301.898974] Hardware name: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.01 03/11/2011 [12301.898982] Call Trace: [12301.898989] dump_stack+0x67/0x9b [12301.898997] __lock_acquire+0x6ad/0x1410 [12301.899003] ? kernfs_remove_by_name_ns+0x3b/0x80 [12301.899010] ? find_held_lock+0x2d/0x90 [12301.899017] ? mutex_spin_on_owner+0xe4/0x150 [12301.899023] ? find_held_lock+0x2d/0x90 [12301.899030] ? lock_acquire+0x90/0x180 [12301.899036] lock_acquire+0x90/0x180 [12301.899042] ? kernfs_remove_by_name_ns+0x3b/0x80 [12301.899049] __kernfs_remove+0x296/0x310 [12301.899055] ? kernfs_remove_by_name_ns+0x3b/0x80 [12301.899060] ? kernfs_name_hash+0xd/0x80 [12301.899066] ? kernfs_find_ns+0x6c/0x100 [12301.899073] kernfs_remove_by_name_ns+0x3b/0x80 [12301.899080] bus_remove_driver+0x92/0xa0 [12301.899085] acpi_video_unregister+0x24/0x40 [12301.899127] i915_driver_unload+0x42/0x130 [i915] [12301.899160] i915_pci_remove+0x19/0x30 [i915] [12301.899169] pci_device_remove+0x36/0xb0 [12301.899176] device_release_driver_internal+0x185/0x240 [12301.899183] unbind_store+0xaf/0x180 [12301.899189] kernfs_fop_write+0x104/0x190 [12301.899195] __vfs_write+0x31/0x180 [12301.899203] ? rcu_read_lock_sched_held+0x6f/0x80 [12301.899209] ? rcu_sync_lockdep_assert+0x29/0x50 [12301.899216] ? __sb_start_write+0x13c/0x1a0 [12301.899221] ? vfs_write+0x17f/0x1b0 [12301.899227] vfs_write+0xb9/0x1b0 [12301.899233] ksys_write+0x50/0xc0 [12301.899239] do_syscall_64+0x4b/0x180 [12301.899247] entry_SYSCALL_64_after_hwframe+0x49/0xbe [12301.899253] RIP: 0033:0x7f452ac7f7a4 [12301.899259] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 aa f0 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83 [12301.899273] RSP: 002b:00007ffceafa6918 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [12301.899282] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f452ac7f7a4 [12301.899288] RDX: 000000000000000d RSI: 00005612a1abf7c0 RDI: 0000000000000001 [12301.899295] RBP: 00005612a1abf7c0 R08: 000000000000000a R09: 00005612a1c46730 [12301.899301] R10: 000000000000000a R11: 0000000000000246 R12: 000000000000000d [12301.899308] R13: 0000000000000001 R14: 00007f452af4a740 R15: 000000000000000d Looking around I've noticed that usb and i2c already handle similar recursion problems, where a sysfs file can unbind the same type of sysfs somewhere else in the hierarchy. Relevant commits are: commit 356c05d Author: Alan Stern <stern@rowland.harvard.edu> Date: Mon May 14 13:30:03 2012 -0400 sysfs: get rid of some lockdep false positives commit e9b526f Author: Alexander Sverdlin <alexander.sverdlin@nsn.com> Date: Fri May 17 14:56:35 2013 +0200 i2c: suppress lockdep warning on delete_device Implement the same trick for driver bind/unbind. v2: Put the macro into bus.c (Greg). Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Arend van Spriel <aspriel@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 532e1e5 ] mount.ocfs2 ignore the inconsistent error that journal is clean but local alloc is unrecovered. After mount, local alloc not empty, then reserver cluster didn't alloc a new local alloc window, reserveration map is empty(ocfs2_reservation_map.m_bitmap_len = 0), that triggered the following panic. This issue was reported at https://oss.oracle.com/pipermail/ocfs2-devel/2015-May/010854.html and was advised to fixed during mount. But this is a very unusual inconsistent state, usually journal dirty flag should be cleared at the last stage of umount until every other things go right. We may need do further debug to check that. Any way to avoid possible futher corruption, mount should be abort and fsck should be run. (mount.ocfs2,1765,1):ocfs2_load_local_alloc:353 ERROR: Local alloc hasn't been recovered! found = 6518, set = 6518, taken = 8192, off = 15912372 ocfs2: Mounting device (202,64) on (node 0, slot 3) with ordered data mode. o2dlm: Joining domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 8 ) 8 nodes ocfs2: Mounting device (202,80) on (node 0, slot 3) with ordered data mode. o2hb: Region 89CEAC63CC4F4D03AC185B44E0EE0F3F (xvdf) is now a quorum device o2net: Accepted connection from node yvwsoa17p (num 7) at 172.22.77.88:7777 o2dlm: Node 7 joins domain 64FE421C8C984E6D96ED12C55FEE2435 ( 0 1 2 3 4 5 6 7 8 ) 9 nodes o2dlm: Node 7 joins domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 7 8 ) 9 nodes ------------[ cut here ]------------ kernel BUG at fs/ocfs2/reservations.c:507! invalid opcode: 0000 [#1] SMP Modules linked in: ocfs2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc ipt_REJECT nf_reject_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 ovmapi ppdev parport_pc parport xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea acpi_cpufreq pcspkr i2c_piix4 i2c_core sg ext4 jbd2 mbcache2 sr_mod cdrom xen_blkfront pata_acpi ata_generic ata_piix floppy dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 4349 Comm: startWebLogic.s Not tainted 4.1.12-124.19.2.el6uek.x86_64 #2 Hardware name: Xen HVM domU, BIOS 4.4.4OVM 09/06/2018 task: ffff8803fb04e200 ti: ffff8800ea4d8000 task.ti: ffff8800ea4d8000 RIP: 0010:[<ffffffffa05e96a8>] [<ffffffffa05e96a8>] __ocfs2_resv_find_window+0x498/0x760 [ocfs2] Call Trace: ocfs2_resmap_resv_bits+0x10d/0x400 [ocfs2] ocfs2_claim_local_alloc_bits+0xd0/0x640 [ocfs2] __ocfs2_claim_clusters+0x178/0x360 [ocfs2] ocfs2_claim_clusters+0x1f/0x30 [ocfs2] ocfs2_convert_inline_data_to_extents+0x634/0xa60 [ocfs2] ocfs2_write_begin_nolock+0x1c6/0x1da0 [ocfs2] ocfs2_write_begin+0x13e/0x230 [ocfs2] generic_perform_write+0xbf/0x1c0 __generic_file_write_iter+0x19c/0x1d0 ocfs2_file_write_iter+0x589/0x1360 [ocfs2] __vfs_write+0xb8/0x110 vfs_write+0xa9/0x1b0 SyS_write+0x46/0xb0 system_call_fastpath+0x18/0xd7 Code: ff ff 8b 75 b8 39 75 b0 8b 45 c8 89 45 98 0f 84 e5 fe ff ff 45 8b 74 24 18 41 8b 54 24 1c e9 56 fc ff ff 85 c0 0f 85 48 ff ff ff <0f> 0b 48 8b 05 cf c3 de ff 48 ba 00 00 00 00 00 00 00 10 48 85 RIP __ocfs2_resv_find_window+0x498/0x760 [ocfs2] RSP <ffff8800ea4db668> ---[ end trace 566f07529f2edf3c ]--- Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Link: http://lkml.kernel.org/r/20181121020023.3034-2-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com> Acked-by: Joseph Qi <jiangqi903@gmail.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit bb61b84 upstream. Presently when an error is encountered during probe of the cxlflash adapter, a deadlock is seen with cpu thread stuck inside cxlflash_remove(). Below is the trace of the deadlock as logged by khungtaskd: cxlflash 0006:00:00.0: cxlflash_probe: init_afu failed rc=-16 INFO: task kworker/80:1:890 blocked for more than 120 seconds. Not tainted 5.0.0-rc4-capi2-kexec+ #2 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/80:1 D 0 890 2 0x00000808 Workqueue: events work_for_cpu_fn Call Trace: 0x4d72136320 (unreliable) __switch_to+0x2cc/0x460 __schedule+0x2bc/0xac0 schedule+0x40/0xb0 cxlflash_remove+0xec/0x640 [cxlflash] cxlflash_probe+0x370/0x8f0 [cxlflash] local_pci_probe+0x6c/0x140 work_for_cpu_fn+0x38/0x60 process_one_work+0x260/0x530 worker_thread+0x280/0x5d0 kthread+0x1a8/0x1b0 ret_from_kernel_thread+0x5c/0x80 INFO: task systemd-udevd:5160 blocked for more than 120 seconds. The deadlock occurs as cxlflash_remove() is called from cxlflash_probe() without setting 'cxlflash_cfg->state' to STATE_PROBED and the probe thread starts to wait on 'cxlflash_cfg->reset_waitq'. Since the device was never successfully probed the 'cxlflash_cfg->state' never changes from STATE_PROBING hence the deadlock occurs. We fix this deadlock by setting the variable 'cxlflash_cfg->state' to STATE_PROBED in case an error occurs during cxlflash_probe() and just before calling cxlflash_remove(). Cc: stable@vger.kernel.org Fixes: c21e0bb("cxlflash: Base support for IBM CXL Flash Adapter") Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b284909 upstream. With the following commit: 73d5e2b ("cpu/hotplug: detect SMT disabled by BIOS") ... the hotplug code attempted to detect when SMT was disabled by BIOS, in which case it reported SMT as permanently disabled. However, that code broke a virt hotplug scenario, where the guest is booted with only primary CPU threads, and a sibling is brought online later. The problem is that there doesn't seem to be a way to reliably distinguish between the HW "SMT disabled by BIOS" case and the virt "sibling not yet brought online" case. So the above-mentioned commit was a bit misguided, as it permanently disabled SMT for both cases, preventing future virt sibling hotplugs. Going back and reviewing the original problems which were attempted to be solved by that commit, when SMT was disabled in BIOS: 1) /sys/devices/system/cpu/smt/control showed "on" instead of "notsupported"; and 2) vmx_vm_init() was incorrectly showing the L1TF_MSG_SMT warning. I'd propose that we instead consider #1 above to not actually be a problem. Because, at least in the virt case, it's possible that SMT wasn't disabled by BIOS and a sibling thread could be brought online later. So it makes sense to just always default the smt control to "on" to allow for that possibility (assuming cpuid indicates that the CPU supports SMT). The real problem is #2, which has a simple fix: change vmx_vm_init() to query the actual current SMT state -- i.e., whether any siblings are currently online -- instead of looking at the SMT "control" sysfs value. So fix it by: a) reverting the original "fix" and its followup fix: 73d5e2b ("cpu/hotplug: detect SMT disabled by BIOS") bc2d8d2 ("cpu/hotplug: Fix SMT supported evaluation") and b) changing vmx_vm_init() to query the actual current SMT state -- instead of the sysfs control value -- to determine whether the L1TF warning is needed. This also requires the 'sched_smt_present' variable to exported, instead of 'cpu_smt_control'. Fixes: 73d5e2b ("cpu/hotplug: detect SMT disabled by BIOS") Reported-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Joe Mario <jmario@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/e3a85d585da28cc333ecbc1e78ee9216e6da9396.1548794349.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5845f70 ] It can be reproduced by following steps: 1. virtio_net NIC is configured with gso/tso on 2. configure nginx as http server with an index file bigger than 1M bytes 3. use tc netem to produce duplicate packets and delay: tc qdisc add dev eth0 root netem delay 100ms 10ms 30% duplicate 90% 4. continually curl the nginx http server to get index file on client 5. BUG_ON is seen quickly [10258690.371129] kernel BUG at net/core/skbuff.c:4028! [10258690.371748] invalid opcode: 0000 [#1] SMP PTI [10258690.372094] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G W 5.0.0-rc6 #2 [10258690.372094] RSP: 0018:ffffa05797b43da0 EFLAGS: 00010202 [10258690.372094] RBP: 00000000000005ea R08: 0000000000000000 R09: 00000000000005ea [10258690.372094] R10: ffffa0579334d800 R11: 00000000000002c0 R12: 0000000000000002 [10258690.372094] R13: 0000000000000000 R14: ffffa05793122900 R15: ffffa0578f7cb028 [10258690.372094] FS: 0000000000000000(0000) GS:ffffa05797b40000(0000) knlGS:0000000000000000 [10258690.372094] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10258690.372094] CR2: 00007f1a6dc00868 CR3: 000000001000e000 CR4: 00000000000006e0 [10258690.372094] Call Trace: [10258690.372094] <IRQ> [10258690.372094] skb_to_sgvec+0x11/0x40 [10258690.372094] start_xmit+0x38c/0x520 [virtio_net] [10258690.372094] dev_hard_start_xmit+0x9b/0x200 [10258690.372094] sch_direct_xmit+0xff/0x260 [10258690.372094] __qdisc_run+0x15e/0x4e0 [10258690.372094] net_tx_action+0x137/0x210 [10258690.372094] __do_softirq+0xd6/0x2a9 [10258690.372094] irq_exit+0xde/0xf0 [10258690.372094] smp_apic_timer_interrupt+0x74/0x140 [10258690.372094] apic_timer_interrupt+0xf/0x20 [10258690.372094] </IRQ> In __skb_to_sgvec(), the skb->len is not equal to the sum of the skb's linear data size and nonlinear data size, thus BUG_ON triggered. Because the skb is cloned and a part of nonlinear data is split off. Duplicate packet is cloned in netem_enqueue() and may be delayed some time in qdisc. When qdisc len reached the limit and returns NET_XMIT_DROP, the skb will be retransmit later in write queue. the skb will be fragmented by tso_fragment(), the limit size that depends on cwnd and mss decrease, the skb's nonlinear data will be split off. The length of the skb cloned by netem will not be updated. When we use virtio_net NIC and invoke skb_to_sgvec(), the BUG_ON trigger. To fix it, netem returns NET_XMIT_SUCCESS to upper stack when it clones a duplicate packet. Fixes: 35d889d ("sch_netem: fix skb leak in netem_enqueue()") Signed-off-by: Sheng Lan <lansheng@huawei.com> Reported-by: Qin Ji <jiqin.ji@huawei.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit afc9f65 ] When building the kernel as Thumb-2 with binutils 2.29 or newer, if the assembler has seen the .type directive (via ENDPROC()) for a symbol, it automatically handles the setting of the lowest bit when the symbol is used with ADR. The badr macro on the other hand handles this lowest bit manually. This leads to a jump to a wrong address in the wrong state in the syscall return path: Internal error: Oops - undefined instruction: 0 [#2] SMP THUMB2 Modules linked in: CPU: 0 PID: 652 Comm: modprobe Tainted: G D 4.18.0-rc3+ #8 PC is at ret_fast_syscall+0x4/0x62 LR is at sys_brk+0x109/0x128 pc : [<80101004>] lr : [<801c8a35>] psr: 60000013 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 50c5387d Table: 9e82006a DAC: 00000051 Process modprobe (pid: 652, stack limit = 0x(ptrval)) 80101000 <ret_fast_syscall>: 80101000: b672 cpsid i 80101002: f8d9 2008 ldr.w r2, [r9, #8] 80101006: f1b2 4ffe cmp.w r2, #2130706432 ; 0x7f000000 80101184 <local_restart>: 80101184: f8d9 a000 ldr.w sl, [r9] 80101188: e92d 0030 stmdb sp!, {r4, r5} 8010118c: f01a 0ff0 tst.w sl, raspberrypi#240 ; 0xf0 80101190: d117 bne.n 801011c2 <__sys_trace> 80101192: 46ba mov sl, r7 80101194: f5ba 7fc8 cmp.w sl, raspberrypi#400 ; 0x190 80101198: bf28 it cs 8010119a: f04f 0a00 movcs.w sl, #0 8010119e: f3af 8014 nop.w {20} 801011a2: f2af 1ea2 subw lr, pc, raspberrypi#418 ; 0x1a2 To fix this, add a new symbol name which doesn't have ENDPROC used on it and use that with badr. We can't remove the badr usage since that would would cause breakage with older binutils. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a843dc4 ] In func check_6rd,tunnel->ip6rd.relay_prefixlen may equal to 32,so UBSAN complain about it. UBSAN: Undefined behaviour in net/ipv6/sit.c:781:47 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 6 PID: 20036 Comm: syz-executor.0 Not tainted 4.19.27 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 ubsan_epilogue+0xe/0x81 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x293/0x2e8 lib/ubsan.c:425 check_6rd.constprop.9+0x433/0x4e0 net/ipv6/sit.c:781 try_6rd net/ipv6/sit.c:806 [inline] ipip6_tunnel_xmit net/ipv6/sit.c:866 [inline] sit_tunnel_xmit+0x141c/0x2720 net/ipv6/sit.c:1033 __netdev_start_xmit include/linux/netdevice.h:4300 [inline] netdev_start_xmit include/linux/netdevice.h:4309 [inline] xmit_one net/core/dev.c:3243 [inline] dev_hard_start_xmit+0x17c/0x780 net/core/dev.c:3259 __dev_queue_xmit+0x1656/0x2500 net/core/dev.c:3829 neigh_output include/net/neighbour.h:501 [inline] ip6_finish_output2+0xa36/0x2290 net/ipv6/ip6_output.c:120 ip6_finish_output+0x3e7/0xa20 net/ipv6/ip6_output.c:154 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip6_output+0x1e2/0x720 net/ipv6/ip6_output.c:171 dst_output include/net/dst.h:444 [inline] ip6_local_out+0x99/0x170 net/ipv6/output_core.c:176 ip6_send_skb+0x9d/0x2f0 net/ipv6/ip6_output.c:1697 ip6_push_pending_frames+0xc0/0x100 net/ipv6/ip6_output.c:1717 rawv6_push_pending_frames net/ipv6/raw.c:616 [inline] rawv6_sendmsg+0x2435/0x3530 net/ipv6/raw.c:946 inet_sendmsg+0xf8/0x5c0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xc8/0x110 net/socket.c:631 ___sys_sendmsg+0x6cf/0x890 net/socket.c:2114 __sys_sendmsg+0xf0/0x1b0 net/socket.c:2152 do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: linmiaohe <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 09db512 ] On ESP output, sk_wmem_alloc is incremented for the added padding if a socket is associated to the skb. When replying with TCP SYNACKs over IPsec, the associated sk is a casted request socket, only. Increasing sk_wmem_alloc on a request socket results in a write at an arbitrary struct offset. In the best case, this produces the following WARNING: WARNING: CPU: 1 PID: 0 at lib/refcount.c:102 esp_output_head+0x2e4/0x308 [esp4] refcount_t: addition on 0; use-after-free. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc3 #2 Hardware name: Marvell Armada 380/385 (Device Tree) [...] [<bf0ff354>] (esp_output_head [esp4]) from [<bf1006a4>] (esp_output+0xb8/0x180 [esp4]) [<bf1006a4>] (esp_output [esp4]) from [<c05dee64>] (xfrm_output_resume+0x558/0x664) [<c05dee64>] (xfrm_output_resume) from [<c05d07b0>] (xfrm4_output+0x44/0xc4) [<c05d07b0>] (xfrm4_output) from [<c05956bc>] (tcp_v4_send_synack+0xa8/0xe8) [<c05956bc>] (tcp_v4_send_synack) from [<c0586ad8>] (tcp_conn_request+0x7f4/0x948) [<c0586ad8>] (tcp_conn_request) from [<c058c404>] (tcp_rcv_state_process+0x2a0/0xe64) [<c058c404>] (tcp_rcv_state_process) from [<c05958ac>] (tcp_v4_do_rcv+0xf0/0x1f4) [<c05958ac>] (tcp_v4_do_rcv) from [<c0598a4c>] (tcp_v4_rcv+0xdb8/0xe20) [<c0598a4c>] (tcp_v4_rcv) from [<c056eb74>] (ip_protocol_deliver_rcu+0x2c/0x2dc) [<c056eb74>] (ip_protocol_deliver_rcu) from [<c056ee6c>] (ip_local_deliver_finish+0x48/0x54) [<c056ee6c>] (ip_local_deliver_finish) from [<c056eecc>] (ip_local_deliver+0x54/0xec) [<c056eecc>] (ip_local_deliver) from [<c056efac>] (ip_rcv+0x48/0xb8) [<c056efac>] (ip_rcv) from [<c0519c2c>] (__netif_receive_skb_one_core+0x50/0x6c) [...] The issue triggers only when not using TCP syncookies, as for syncookies no socket is associated. Fixes: cac2661 ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30 ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit fe67888 upstream. An already deleted SCSI device can exist on the Scsi_Host and remain there because something still holds a reference. A new SCSI device with the same H:C:T:L and FCP device, target port WWPN, and FCP LUN can be created. When we try to unblock an rport, we still find the deleted SCSI device and return early because the zfcp_scsi_dev of that SCSI device is not ZFCP_STATUS_COMMON_UNBLOCKED. Hence we miss to unblock the rport, even if the new proper SCSI device would be in good state. Therefore, skip deleted SCSI devices when iterating the sdevs of the shost. [cf. __scsi_device_lookup{_by_target}() or scsi_device_get()] The following abbreviated trace sequence can indicate such problem: Area : REC Tag : ersfs_3 LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x40000000 not ZFCP_STATUS_COMMON_UNBLOCKED Ready count : n not incremented yet Running count : 0x00000000 ERP want : 0x01 ERP need : 0xc1 ZFCP_ERP_ACTION_NONE Area : REC Tag : ersfs_3 LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x41000000 Ready count : n+1 Running count : 0x00000000 ERP want : 0x01 ERP need : 0x01 ... Area : REC Level : 4 only with increased trace level Tag : ertru_l LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x40000000 Request ID : 0x0000000000000000 ERP status : 0x01800000 ERP step : 0x1000 ERP action : 0x01 ERP count : 0x00 NOT followed by a trace record with tag "scpaddy" for WWPN 0x50050763031bd327. Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: 6f2ce1c ("scsi: zfcp: fix rport unblock race with LUN recovery") Cc: <stable@vger.kernel.org> #2.6.32+ Reviewed-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 92d1d07 ] Kmemleak throws endless warnings during boot due to in __alloc_alien_cache(), alc = kmalloc_node(memsize, gfp, node); init_arraycache(&alc->ac, entries, batch); kmemleak_no_scan(ac); Kmemleak does not track the array cache (alc->ac) but the alien cache (alc) instead, so let it track the latter by lifting kmemleak_no_scan() out of init_arraycache(). There is another place that calls init_arraycache(), but alloc_kmem_cache_cpus() uses the percpu allocation where will never be considered as a leak. kmemleak: Found object by alias at 0xffff8007b9aa7e38 CPU: 190 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2+ #2 Call trace: dump_backtrace+0x0/0x168 show_stack+0x24/0x30 dump_stack+0x88/0xb0 lookup_object+0x84/0xac find_and_get_object+0x84/0xe4 kmemleak_no_scan+0x74/0xf4 setup_kmem_cache_node+0x2b4/0x35c __do_tune_cpucache+0x250/0x2d4 do_tune_cpucache+0x4c/0xe4 enable_cpucache+0xc8/0x110 setup_cpu_cache+0x40/0x1b8 __kmem_cache_create+0x240/0x358 create_cache+0xc0/0x198 kmem_cache_create_usercopy+0x158/0x20c kmem_cache_create+0x50/0x64 fsnotify_init+0x58/0x6c do_one_initcall+0x194/0x388 kernel_init_freeable+0x668/0x688 kernel_init+0x18/0x124 ret_from_fork+0x10/0x18 kmemleak: Object 0xffff8007b9aa7e00 (size 256): kmemleak: comm "swapper/0", pid 1, jiffies 4294697137 kmemleak: min_count = 1 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: kmemleak_alloc+0x84/0xb8 kmem_cache_alloc_node_trace+0x31c/0x3a0 __kmalloc_node+0x58/0x78 setup_kmem_cache_node+0x26c/0x35c __do_tune_cpucache+0x250/0x2d4 do_tune_cpucache+0x4c/0xe4 enable_cpucache+0xc8/0x110 setup_cpu_cache+0x40/0x1b8 __kmem_cache_create+0x240/0x358 create_cache+0xc0/0x198 kmem_cache_create_usercopy+0x158/0x20c kmem_cache_create+0x50/0x64 fsnotify_init+0x58/0x6c do_one_initcall+0x194/0x388 kernel_init_freeable+0x668/0x688 kernel_init+0x18/0x124 kmemleak: Not scanning unknown object at 0xffff8007b9aa7e38 CPU: 190 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2+ #2 Call trace: dump_backtrace+0x0/0x168 show_stack+0x24/0x30 dump_stack+0x88/0xb0 kmemleak_no_scan+0x90/0xf4 setup_kmem_cache_node+0x2b4/0x35c __do_tune_cpucache+0x250/0x2d4 do_tune_cpucache+0x4c/0xe4 enable_cpucache+0xc8/0x110 setup_cpu_cache+0x40/0x1b8 __kmem_cache_create+0x240/0x358 create_cache+0xc0/0x198 kmem_cache_create_usercopy+0x158/0x20c kmem_cache_create+0x50/0x64 fsnotify_init+0x58/0x6c do_one_initcall+0x194/0x388 kernel_init_freeable+0x668/0x688 kernel_init+0x18/0x124 ret_from_fork+0x10/0x18 Link: http://lkml.kernel.org/r/20190129184518.39808-1-cai@lca.pw Fixes: 1fe00d5 ("slab: factor out initialization of array cache") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…_map [ Upstream commit 39df730 ] Detected via gcc's ASan: Direct leak of 2048 byte(s) in 64 object(s) allocated from: 6 #0 0x7f606512e370 in __interceptor_realloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee370) 7 #1 0x556b0f1d7ddd in thread_map__realloc util/thread_map.c:43 8 #2 0x556b0f1d84c7 in thread_map__new_by_tid util/thread_map.c:85 9 #3 0x556b0f0e045e in is_event_supported util/parse-events.c:2250 10 #4 0x556b0f0e1aa1 in print_hwcache_events util/parse-events.c:2382 11 #5 0x556b0f0e3231 in print_events util/parse-events.c:2514 12 #6 0x556b0ee0a66e in cmd_list /home/changbin/work/linux/tools/perf/builtin-list.c:58 13 #7 0x556b0f01e0ae in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 14 #8 0x556b0f01e859 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 15 #9 0x556b0f01edc8 in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 16 #10 0x556b0f01f71f in main /home/changbin/work/linux/tools/perf/perf.c:520 17 #11 0x7f6062ccf09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: Changbin Du <changbin.du@gmail.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Fixes: 8989605 ("perf tools: Do not put a variable sized type not at the end of a struct") Link: http://lkml.kernel.org/r/20190316080556.3075-3-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 54569ba ] Detected with gcc's ASan: Direct leak of 66 byte(s) in 5 object(s) allocated from: #0 0x7ff3b1f32070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070) #1 0x560c8761034d in collect_config util/config.c:597 #2 0x560c8760d9cb in get_value util/config.c:169 #3 0x560c8760dfd7 in perf_parse_file util/config.c:285 #4 0x560c8760e0d2 in perf_config_from_file util/config.c:476 #5 0x560c876108fd in perf_config_set__init util/config.c:661 #6 0x560c87610c72 in perf_config_set__new util/config.c:709 #7 0x560c87610d2f in perf_config__init util/config.c:718 #8 0x560c87610e5d in perf_config util/config.c:730 #9 0x560c875ddea0 in main /home/changbin/work/linux/tools/perf/perf.c:442 #10 0x7ff3afb8609a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: Changbin Du <changbin.du@gmail.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Taeung Song <treeze.taeung@gmail.com> Fixes: 20105ca ("perf config: Introduce perf_config_set class") Link: http://lkml.kernel.org/r/20190316080556.3075-6-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8bde851 ] Detected with gcc's ASan: Direct leak of 4356 byte(s) in 120 object(s) allocated from: #0 0x7ff1a2b5a070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070) #1 0x55719aef4814 in build_id_cache__origname util/build-id.c:215 #2 0x55719af649b6 in print_sdt_events util/parse-events.c:2339 #3 0x55719af66272 in print_events util/parse-events.c:2542 #4 0x55719ad1ecaa in cmd_list /home/changbin/work/linux/tools/perf/builtin-list.c:58 #5 0x55719aec745d in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #6 0x55719aec7d1a in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #7 0x55719aec8184 in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #8 0x55719aeca41a in main /home/changbin/work/linux/tools/perf/perf.c:520 #9 0x7ff1a07ae09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: Changbin Du <changbin.du@gmail.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Fixes: 40218da ("perf list: Show SDT and pre-cached events") Link: http://lkml.kernel.org/r/20190316080556.3075-7-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 42dfa45 ] Using gcc's ASan, Changbin reports: ================================================================= ==7494==ERROR: LeakSanitizer: detected memory leaks Direct leak of 48 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e5330a5e in zalloc util/util.h:23 #2 0x5625e5330a9b in perf_counts__new util/counts.c:10 #3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #7 0x5625e51528e6 in run_test tests/builtin-test.c:358 #8 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #10 0x5625e515572f in cmd_test tests/builtin-test.c:722 #11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Indirect leak of 72 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e532560d in zalloc util/util.h:23 #2 0x5625e532566b in xyarray__new util/xyarray.c:10 #3 0x5625e5330aba in perf_counts__new util/counts.c:15 #4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #8 0x5625e51528e6 in run_test tests/builtin-test.c:358 #9 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #11 0x5625e515572f in cmd_test tests/builtin-test.c:722 #12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) His patch took care of evsel->prev_raw_counts, but the above backtraces are about evsel->counts, so fix that instead. Reported-by: Changbin Du <changbin.du@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lkml.kernel.org/n/tip-hd1x13g59f0nuhe4anxhsmfp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…_event_on_all_cpus test [ Upstream commit 93faa52 ] ================================================================= ==7497==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f0333a88f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30) #1 0x5625e5326213 in cpu_map__trim_new util/cpumap.c:45 #2 0x5625e5326703 in cpu_map__read util/cpumap.c:103 #3 0x5625e53267ef in cpu_map__read_all_cpu_map util/cpumap.c:120 #4 0x5625e5326915 in cpu_map__new util/cpumap.c:135 #5 0x5625e517b355 in test__openat_syscall_event_on_all_cpus tests/openat-syscall-all-cpus.c:36 #6 0x5625e51528e6 in run_test tests/builtin-test.c:358 #7 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #8 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #9 0x5625e515572f in cmd_test tests/builtin-test.c:722 #10 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #11 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #12 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #13 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #14 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: Changbin Du <changbin.du@gmail.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Fixes: f30a79b ("perf tools: Add reference counting for cpu_map object") Link: http://lkml.kernel.org/r/20190316080556.3075-15-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f97a899 ] ================================================================= ==7506==ERROR: LeakSanitizer: detected memory leaks Direct leak of 13 byte(s) in 3 object(s) allocated from: #0 0x7f03339d6070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070) #1 0x5625e53aaef0 in expr__find_other util/expr.y:221 #2 0x5625e51bcd3f in test__expr tests/expr.c:52 #3 0x5625e51528e6 in run_test tests/builtin-test.c:358 #4 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #5 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #6 0x5625e515572f in cmd_test tests/builtin-test.c:722 #7 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #8 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #9 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #10 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #11 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: Changbin Du <changbin.du@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Fixes: 0751673 ("perf tools: Add a simple expression parser for JSON") Link: http://lkml.kernel.org/r/20190316080556.3075-16-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d982b33 ] ================================================================= ==20875==ERROR: LeakSanitizer: detected memory leaks Direct leak of 1160 byte(s) in 1 object(s) allocated from: #0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x55bd50005599 in zalloc util/util.h:23 #2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327 #3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216 #4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69 #5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358 #6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388 #7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583 #8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722 #9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520 #13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Indirect leak of 19 byte(s) in 1 object(s) allocated from: #0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30) #1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f) Signed-off-by: Changbin Du <changbin.du@gmail.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Fixes: 6a6cd11 ("perf test: Add test for the sched tracepoint format fields") Link: http://lkml.kernel.org/r/20190316080556.3075-17-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bd18bff ] A VMEnter that VMFails (as opposed to VMExits) does not touch host state beyond registers that are explicitly noted in the VMFail path, e.g. EFLAGS. Host state does not need to be loaded because VMFail is only signaled for consistency checks that occur before the CPU starts to load guest state, i.e. there is no need to restore any state as nothing has been modified. But in the case where a VMFail is detected by hardware and not by KVM (due to deferring consistency checks to hardware), KVM has already loaded some amount of guest state. Luckily, "loaded" only means loaded to KVM's software model, i.e. vmcs01 has not been modified. So, unwind our software model to the pre-VMEntry host state. Not restoring host state in this VMFail path leads to a variety of failures because we end up with stale data in vcpu->arch, e.g. CR0, CR4, EFER, etc... will all be out of sync relative to vmcs01. Any significant delta in the stale data is all but guaranteed to crash L1, e.g. emulation of SMEP, SMAP, UMIP, WP, etc... will be wrong. An alternative to this "soft" reload would be to load host state from vmcs12 as if we triggered a VMExit (as opposed to VMFail), but that is wildly inconsistent with respect to the VMX architecture, e.g. an L1 VMM with separate VMExit and VMFail paths would explode. Note that this approach does not mean KVM is 100% accurate with respect to VMX hardware behavior, even at an architectural level (the exact order of consistency checks is microarchitecture specific). But 100% emulation accuracy isn't the goal (with this patch), rather the goal is to be consistent in the information delivered to L1, e.g. a VMExit should not fall-through VMENTER, and a VMFail should not jump to HOST_RIP. This technically reverts commit "5af4157388ad (KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure)", but retains the core aspects of that patch, just in an open coded form due to the need to pull state from vmcs01 instead of vmcs12. Restoring host state resolves a variety of issues introduced by commit "4f350c6dbcb9 (kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly)", which remedied the incorrect behavior of treating VMFail like VMExit but in doing so neglected to restore arch state that had been modified prior to attempting nested VMEnter. A sample failure that occurs due to stale vcpu.arch state is a fault of some form while emulating an LGDT (due to emulated UMIP) from L1 after a failed VMEntry to L3, in this case when running the KVM unit test test_tpr_threshold_values in L1. L0 also hits a WARN in this case due to a stale arch.cr4.UMIP. L1: BUG: unable to handle kernel paging request at ffffc90000663b9e PGD 276512067 P4D 276512067 PUD 276513067 PMD 274efa067 PTE 8000000271de2163 Oops: 0009 [#1] SMP CPU: 5 PID: 12495 Comm: qemu-system-x86 Tainted: G W 4.18.0-rc2+ #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:native_load_gdt+0x0/0x10 ... Call Trace: load_fixmap_gdt+0x22/0x30 __vmx_load_host_state+0x10e/0x1c0 [kvm_intel] vmx_switch_vmcs+0x2d/0x50 [kvm_intel] nested_vmx_vmexit+0x222/0x9c0 [kvm_intel] vmx_handle_exit+0x246/0x15a0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x850/0x1830 [kvm] kvm_vcpu_ioctl+0x3a1/0x5c0 [kvm] do_vfs_ioctl+0x9f/0x600 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x4f/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 L0: WARNING: CPU: 2 PID: 3529 at arch/x86/kvm/vmx.c:6618 handle_desc+0x28/0x30 [kvm_intel] ... CPU: 2 PID: 3529 Comm: qemu-system-x86 Not tainted 4.17.2-coffee+ raspberrypi#76 Hardware name: Intel Corporation Kabylake Client platform/KBL S RIP: 0010:handle_desc+0x28/0x30 [kvm_intel] ... Call Trace: kvm_arch_vcpu_ioctl_run+0x863/0x1840 [kvm] kvm_vcpu_ioctl+0x3a1/0x5c0 [kvm] do_vfs_ioctl+0x9f/0x5e0 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x49/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 5af4157 (KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure) Fixes: 4f350c6 (kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly) Cc: Jim Mattson <jmattson@google.com> Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim KrÄmÃ¡Å™ <rkrcmar@redhat.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 9002b21 upstream. Commit 32a5ad9 ("sysctl: handle overflow for file-max") hooked up min/max values for the file-max sysctl parameter via the .extra1 and .extra2 fields in the corresponding struct ctl_table entry. Unfortunately, the minimum value points at the global 'zero' variable, which is an int. This results in a KASAN splat when accessed as a long by proc_doulongvec_minmax on 64-bit architectures: | BUG: KASAN: global-out-of-bounds in __do_proc_doulongvec_minmax+0x5d8/0x6a0 | Read of size 8 at addr ffff2000133d1c20 by task systemd/1 | | CPU: 0 PID: 1 Comm: systemd Not tainted 5.1.0-rc3-00012-g40b114779944 #2 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x228 | show_stack+0x14/0x20 | dump_stack+0xe8/0x124 | print_address_description+0x60/0x258 | kasan_report+0x140/0x1a0 | __asan_report_load8_noabort+0x18/0x20 | __do_proc_doulongvec_minmax+0x5d8/0x6a0 | proc_doulongvec_minmax+0x4c/0x78 | proc_sys_call_handler.isra.19+0x144/0x1d8 | proc_sys_write+0x34/0x58 | __vfs_write+0x54/0xe8 | vfs_write+0x124/0x3c0 | ksys_write+0xbc/0x168 | __arm64_sys_write+0x68/0x98 | el0_svc_common+0x100/0x258 | el0_svc_handler+0x48/0xc0 | el0_svc+0x8/0xc | | The buggy address belongs to the variable: | zero+0x0/0x40 | | Memory state around the buggy address: | ffff2000133d1b00: 00 00 00 00 00 00 00 00 fa fa fa fa 04 fa fa fa | ffff2000133d1b80: fa fa fa fa 04 fa fa fa fa fa fa fa 04 fa fa fa | >ffff2000133d1c00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 | ^ | ffff2000133d1c80: fa fa fa fa 00 fa fa fa fa fa fa fa 00 00 00 00 | ffff2000133d1d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fix the splat by introducing a unsigned long 'zero_ul' and using that instead. Link: http://lkml.kernel.org/r/20190403153409.17307-1-will.deacon@arm.com Fixes: 32a5ad9 ("sysctl: handle overflow for file-max") Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Christian Brauner <christian@brauner.io> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matteo Croce <mcroce@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

msperl closed this as completed Apr 17, 2015

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

fix devicetree overlay for mcp2515 #2

fix devicetree overlay for mcp2515 #2

msperl commented Apr 17, 2015

fix devicetree overlay for mcp2515 #2

fix devicetree overlay for mcp2515 #2

Comments

msperl commented Apr 17, 2015