Ice subfunction in switchdev #1

mswiatko · 2023-12-20T15:33:51Z

No description provided.

The function i40e_pf_wait_queues_disabled() iterates all PF's VSIs up to 'pf->hw.func_caps.num_vsis' but this is incorrect because the real number of VSIs can be up to 'pf->num_alloc_vsi' that can be higher. Fix this loop. Fixes: 69129dc ("i40e: Modify Tx disable wait flow in case of DCB reconfiguration") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>

Mask used for clearing PRTDCB_RETSTCC register in function i40e_dcb_hw_rx_ets_bw_config() is incorrect as there is used define I40E_PRTDCB_RETSTCC_ETSTC_SHIFT instead of define I40E_PRTDCB_RETSTCC_ETSTC_MASK. The PRTDCB_RETSTCC register is used to configure whether ETS or strict priority is used as TSA in Rx for particular TC. In practice it means that once the register is set to use ETS as TSA then it is not possible to switch back to strict priority without CoreR reset. Fix the value in the clearing mask. Fixes: 90bc8e0 ("i40e: Add hardware configuration for software based DCB") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>

For more than 15 years this code has passed in a request for a page and masked off that page when read/writing. This code has been here forever, but FIELD_PREP finds the bug when converted to use it. Change the code to do exactly the same thing but allow the conversion to FIELD_PREP in a later patch. To make it clear what we lost when making this change I left a comment, but there is no point to change the code to generate a correct sequence at this point. This is not a Fixes tagged patch on purpose because it doesn't change the binary output. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

This series is introducing the use of FIELD_GET and FIELD_PREP which requires bitfield.h to be included. Fix all the includes in this one change, and rearrange includes into alphabetical order to ease readability and future maintenance. virtchnl.h and it's usage was modified to have it's own includes as it should. This required including bits.h for virtchnl.h. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

@prep2

Refactor several older Intel drivers to use FIELD_PREP(), which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. @prep2@ constant shift,mask; type T; expression a; @@ -(((T)(a) << shift) & mask) +FIELD_PREP(mask, a) @prep@ constant shift,mask; type T; expression a; @@ -((T)((a) << shift) & mask) +FIELD_PREP(mask, a) Cc: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

@prep2

Refactor i40e driver to use FIELD_PREP(), which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. Refactor one function with multiple if's to return quickly to make lines fit in 80 columns. @prep2@ constant shift,mask; type T; expression a; @@ -(((T)(a) << shift) & mask) +FIELD_PREP(mask, a) @prep@ constant shift,mask; type T; expression a; @@ -((T)((a) << shift) & mask) +FIELD_PREP(mask, a) Cc: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

@prep2

Refactor iavf driver to use FIELD_PREP(), which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. Clean up a couple spots in the code that had repetitive y = cpu_to_*((blah << blah_blah) & blat) y |= cpu_to_*((blahs << blahs_blahs) & blats) to x = FIELD_PREP(blat blah) x |= FIELD_PREP(blats, blahs) y = cpu_to_*(x); @prep2@ constant shift,mask; type T; expression a; @@ -(((T)(a) << shift) & mask) +FIELD_PREP(mask, a) @prep@ constant shift,mask; type T; expression a; @@ -((T)((a) << shift) & mask) +FIELD_PREP(mask, a) Cc: Julia Lawall <Julia.Lawall@inria.fr> Cc: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

@prep2

Refactor ice driver to use FIELD_PREP(), which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. Several places I changed to OR into a single variable with |= instead of using a multi-line statement with trailing OR operators, as it (subjectively) makes the code clearer. A local variable vmvf_and_timeout was created and used to avoid multiple logical ORs being __le16 converted, which shortened some lines and makes the code cleaner. Also clean up a couple of places where conversions were made to have the code read more clearly/consistently. @prep2@ constant shift,mask; type T; expression a; @@ -(((T)(a) << shift) & mask) +FIELD_PREP(mask, a) @prep@ constant shift,mask; type T; expression a; @@ -((T)((a) << shift) & mask) +FIELD_PREP(mask, a) Cc: Julia Lawall <Julia.Lawall@inria.fr> CC: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

While converting to FIELD_PREP() and FIELD_GET(), it was noticed that some of the RSS defines had *included* the shift in their definitions. This is completely outside of normal, such that a developer could easily make a mistake and shift at the usage site (like when using FIELD_PREP()). Rename the defines and set them to the "pre-shifted values" so they match the template the driver normally uses for masks and the member bits of the mask, which also allows the driver to use FIELD_PREP correctly with these values. Use GENMASK() for this changed MASK value. Do the same for the VLAN EMODE defines as well. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

@prep2

Refactor igc driver to use FIELD_PREP(), which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired in a later patch. @prep2@ constant shift,mask; type T; expression a; @@ -(((T)(a) << shift) & mask) +FIELD_PREP(mask, a) @prep@ constant shift,mask; type T; expression a; @@ -((T)((a) << shift) & mask) +FIELD_PREP(mask, a) Cc: Julia Lawall <Julia.Lawall@inria.fr> Cc: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

@get

Refactor several older Intel drivers to use FIELD_GET(), which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. @get@ constant shift,mask; type T; expression a; @@ ( -((T)((a) & mask) >> shift) +FIELD_GET(mask, a) and applied via: spatch --sp-file field_prep.cocci --in-place --dir \ drivers/net/ethernet/intel/ Cc: Julia Lawall <Julia.Lawall@inria.fr> CC: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

@get

Refactor the igc driver to use FIELD_GET() for mask and shift reads, which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired in a later patch. @get@ constant shift,mask; type T; expression a; @@ -((T)((a) & mask) >> shift) +FIELD_GET(mask, a) and applied via: spatch --sp-file field_prep.cocci --in-place --dir \ drivers/net/ethernet/intel/ Cc: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

@get

Refactor the i40e driver to use FIELD_GET() for mask and shift reads, which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. While making one of the conversions, an if() check was inverted to return early and avoid un-necessary indentation of the remainder of the function. In some other cases a stack variable was moved inside the block where it was used while doing cleanups/review. A couple places were changed to use le16_get_bits() instead of FIELD_GET with a le16_to_cpu combination. @get@ constant shift,mask; metavariable type T; expression a; @@ -(((T)(a) & mask) >> shift) +FIELD_GET(mask, a) and applied via: spatch --sp-file field_prep.cocci --in-place --dir \ drivers/net/ethernet/intel/ Cc: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

@get

Refactor the iavf driver to use FIELD_GET() for mask and shift reads, which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired in a later patch. @get@ constant shift,mask; type T; expression a; @@ -((T)((a) & mask) >> shift) +FIELD_GET(mask, a) and applied via: spatch --sp-file field_prep.cocci --in-place --dir \ drivers/net/ethernet/intel/ Cc: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

@get

Refactor the ice driver to use FIELD_GET() for mask and shift reads, which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. @get@ constant shift,mask; type T; expression a; @@ -(((T)(a) & mask) >> shift) +FIELD_GET(mask, a) and applied via: spatch --sp-file field_prep.cocci --in-place --dir \ drivers/net/ethernet/intel/ CC: Alexander Lobakin <aleksander.lobakin@intel.com> Cc: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

It was found while doing further testing of the previous commit fbf32a9bab91 ("ice: field get conversion") that one of the FIELD_GET conversions should really be a FIELD_PREP. The previous code was styled as a match to the FIELD_GET conversion, which always worked because the shift value was 0. The code makes way more sense as a FIELD_PREP and was in fact the only FIELD_GET with two constant arguments in this series. Didn't squash this patch to make it easier to call out the (non-impactful) bug. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

@prep2

Most of idpf correctly uses FIELD_GET and FIELD_PREP, but a couple spots were missed so fix those. Automated conversion with coccinelle script and manually fixed up, including audits for opportunities to convert to {get,encode,replace} bits functions. Add conversions to le16_get/encode/replace_bits where appropriate. And in one place fix up a cast from a u16 to a u16. @prep2@ constant shift,mask; type T; expression a; @@ -(((T)(a) << shift) & mask) +FIELD_PREP(mask, a) @prep@ constant shift,mask; type T; expression a; @@ -((T)((a) << shift) & mask) +FIELD_PREP(mask, a) @get@ constant shift,mask; type T; expression a; @@ -((T)((a) & mask) >> shift) +FIELD_GET(mask, a) and applied via: spatch --sp-file field_prep.cocci --in-place --dir \ drivers/net/ethernet/intel/ CC: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

Use existing i40e_find_vsi_by_type() to find a VSI associated with flow director. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com>

Introduce i40e_for_each_vsi() and i40e_for_each_veb() helper macros and use them to iterate relevant arrays. Replace pattern: for (i = 0; i < pf->num_alloc_vsi; i++) by: i40e_for_each_vsi(pf, i, vsi) and pattern: for (i = 0; i < I40E_MAX_VEB; i++) by i40e_for_each_veb(pf, i, veb) These macros also check if array item pf->vsi[i] or pf->veb[i] are not NULL and skip such items so we can remove redundant checks from loop bodies. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com>

Add two helpers i40e_(veb|vsi)_get_by_seid() to find corresponding VEB or VSI by their SEID value and use these helpers to replace existing open-coded loops. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com>

Although the i40e supports so-called floating VEB (VEB without an uplink connection to external network), this support is broken. This functionality is currently unused (except debugfs) but it will be used by subsequent series for switchdev mode slow-path. Fix this by following: 1) Handle correctly floating VEB (VEB with uplink_seid == 0) in i40e_reconstitute_veb() and look for owner VSI and create it only for non-floating VEBs and also set bridge mode only for such VEBs as the floating ones are using always VEB mode. 2) Handle correctly floating VEB in i40e_veb_release() and disallow its release when there are some VSIs. This is different from regular VEB that have owner VSI that is connected to VEB's uplink after VEB deletion by FW. 3) Fix i40e_add_veb() to handle 'vsi' that is NULL for floating VEBs. For floating VEB use 0 for downlink SEID and 'true' for 'default_port' parameters as per datasheet. 4) Fix 'add relay' command in i40e_dbg_command_write() to allow to create floating VEB by 'add relay 0 0' or 'add relay' Tested using debugfs: 1) Initial state [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 173.701286] i40e 0000:02:00.0: header: 3 reported 3 total [ 173.706701] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 173.713241] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 173.719507] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 2) Add floating VEB [root@host net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command" [root@host net-next]# echo add relay > $CMD [root@host net-next]# dmesg -c [ 245.551720] i40e 0000:02:00.0: added relay 162 [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 276.984371] i40e 0000:02:00.0: header: 4 reported 4 total [ 276.989779] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 276.996302] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 277.002569] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 [ 277.009091] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 3) Add VMDQ2 VSI to this new VEB [root@host net-next]# echo add vsi 162 > $CMD [root@host net-next]# dmesg -c [ 332.314030] i40e 0000:02:00.0: added VSI 394 to relay 162 [ 332.337486] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 387.284490] i40e 0000:02:00.0: header: 5 reported 5 total [ 387.289904] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 387.296446] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 387.302708] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 387.309234] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 387.315500] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 4) Try to delete the VEB [root@host net-next]# echo del relay 162 > $CMD [root@host net-next]# dmesg -c [ 428.749297] i40e 0000:02:00.0: deleting relay 162 [ 428.754011] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left 5) Do PF reset and check switch status after rebuild [root@host net-next]# echo pfr > $CMD [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 738.056172] i40e 0000:02:00.0: header: 5 reported 5 total [ 738.061577] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 738.068104] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 738.074367] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 738.080892] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 738.087160] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 6) Delete VSI and delete VEB [root@host net-next]# echo del vsi 394 > $CMD [root@host net-next]# echo del relay 162 > $CMD [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 1233.081126] i40e 0000:02:00.0: deleting VSI 394 [ 1239.345139] i40e 0000:02:00.0: deleting relay 162 [ 1244.886920] i40e 0000:02:00.0: header: 3 reported 3 total [ 1244.892328] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 1244.898853] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 1244.905119] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com>

The VEB (virtual embedded switch) as a switch element can be connected according datasheet though its uplink to: - Physical port - Port Virtualizer (not used directly by i40e driver but can be present in MFP mode where the physical port is shared between PFs) - No uplink (aka floating VEB) But VEB uplink cannot be connected to another VEB and any attempt to do so results in: "i40e 0000:02:00.0: couldn't add VEB, err -EIO aq_err I40E_AQ_RC_ENOENT" that indicates "the uplink SEID does not point to valid element". Remove this logic from the driver code this way: 1) For debugfs only allow to build floating VEB (uplink_seid == 0) or main VEB (uplink_seid == mac_seid) 2) Do not recurse in i40e_veb_link_event() as no VEB cannot have sub-VEBs 3) Ditto for i40e_veb_rebuild() + simplify the function as we know that the VEB for rebuild can be only the main LAN VEB or some of the floating VEBs 4) In i40e_rebuild() there is no need to check veb->uplink_seid as the possible ones are 0 and MAC SEID 5) In i40e_vsi_release() do not take into account VEBs whose uplink is another VEB as this is not possible 6) Remove veb_idx field from i40e_veb as a VEB cannot have sub-VEBs Tested using i40e debugfs interface: 1) Initial state [root@cnb-03 net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command" [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c [ 98.440641] i40e 0000:02:00.0: header: 3 reported 3 total [ 98.446053] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 98.452593] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 98.458856] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 2) Add floating VEB [root@cnb-03 net-next]# echo add relay > $CMD [root@cnb-03 net-next]# dmesg -c [ 122.745630] i40e 0000:02:00.0: added relay 162 [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c [ 136.650049] i40e 0000:02:00.0: header: 4 reported 4 total [ 136.655466] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 136.661994] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 136.668264] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 [ 136.674787] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 3) Add VMDQ2 VSI to this new VEB [root@cnb-03 net-next]# dmesg -c [ 168.351763] i40e 0000:02:00.0: added VSI 394 to relay 162 [ 168.374652] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c [ 195.683204] i40e 0000:02:00.0: header: 5 reported 5 total [ 195.688611] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 195.695143] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 195.701410] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 195.707935] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 195.714201] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 4) Try to delete the VEB [root@cnb-03 net-next]# echo del relay 162 > $CMD [root@cnb-03 net-next]# dmesg -c [ 239.260901] i40e 0000:02:00.0: deleting relay 162 [ 239.265621] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left 5) Do PF reset and check switch status after rebuild [root@cnb-03 net-next]# echo pfr > $CMD [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c ... [ 272.333655] i40e 0000:02:00.0: header: 5 reported 5 total [ 272.339066] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 272.345599] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 272.351862] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 272.358387] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 272.364654] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 6) Delete VSI and delete VEB [ 297.199116] i40e 0000:02:00.0: deleting VSI 394 [ 299.807580] i40e 0000:02:00.0: deleting relay 162 [ 309.767905] i40e 0000:02:00.0: header: 3 reported 3 total [ 309.773318] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 309.779845] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 309.786111] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com>

Prevent VF from configuring filters with unsupported actions or use REDIRECT action with invalid tc number. Current checks could cause out of bounds access on PF side. Fixes: e284fc2 ("i40e: Add and delete cloud filter") Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>

ST code value for clause 45 that has been changed by commit 8196b5f ("i40e: Refactor I40E_MDIO_CLAUSE* macros") is currently wrong. The mentioned commit refactored ..MDIO_CLAUSE??_STCODE_MASK so their value is the same for both clauses. The value is correct for clause 22 but not for clause 45. Fix the issue by adding a parameter to I40E_GLGEN_MSCA_STCODE_MASK macro that specifies required value. Fixes: 8196b5f ("i40e: Refactor I40E_MDIO_CLAUSE* macros") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>

To map phy types reported by the hardware to ethtool link mode bits, ice uses two lookup tables (phy_type_low_lkup, phy_type_high_lkup). The "low" table has 64 elements to cover every possible bit the hardware may report, but the "high" table has only 13. If the hardware reports a higher bit in phy_types_high, the driver would access memory beyond the lookup table's end. Instead of iterating through all 64 bits of phy_types_{low,high}, use the sizes of the respective lookup tables. Fixes: 9136e1f ("ice: refactor PHY type to ethtool link mode") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>

The ice_vf_create_vsi() function and its VF ops helper introduced by commit a4c785e8162e ("ice: convert vf_ops .vsi_rebuild to .create_vsi") are used during an individual VF reset to re-create the VSI. This was done in order to ensure that the VSI gets properly reconfigured within the hardware. This is somewhat heavy handed as we completely release the VSI memory and structure, and then create a new VSI. This can also potentially force a change of the VSI index as we will re-use the first open slot in the VSI array which may not be the same. As part of implementing devlink reload, commit 6624e78 ("ice: split ice_vsi_setup into smaller functions") split VSI setup into smaller functions, introducing both ice_vsi_cfg() and ice_vsi_decfg() which can be used to configure or deconfigure an existing software VSI structure. Rather than completely removing the VSI and adding a new one using the .create_vsi() VF operation, simply use ice_vsi_decfg() to remove the current configuration. Save the VSI type and then call ice_vsi_cfg() to reconfigure the VSI as the same type that it was before. The existing reset logic assumes that all hardware filters will be removed, so also call ice_fltr_remove_all() before re-configuring the VSI. This new operation does not re-create the VSI, so rename it to ice_vf_reconfig_vsi(). The new approach can safely share the exact same flow for both SR-IOV VFs as well as the Scalable IOV VFs being worked on. This uses less code and is a better abstraction over fully deleting the VSI and adding a new one. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Petr Oros <poros@redhat.com>

Schedule service task and EXTTS in the top half to avoid bottom half scheduling if possible, which significantly reduces timestamping delay. Co-developed-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>

Introduce new capability - Low Latency Timestamping with Interrupt. On supported devices, driver can request a single timestamp from FW without polling the register afterwards. Instead, FW can issue a dedicated interrupt when the timestamp was read from the PHY register and its value is available to read from the register. This eliminates the need of bottom half scheduling, which results in minimal delay for timestamping. For this mode, allocate TS indices sequentially, so that timestamps are always completed in FIFO manner. Co-developed-by: Yochai Hagvi <yochai.hagvi@intel.com> Signed-off-by: Yochai Hagvi <yochai.hagvi@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>

Currently, if a VF is disabled using the 'ip link set dev $ETHX vf $VF_NUM state disable' command, the VF is still able to receive traffic. Fix the behavior of the 'ip link set dev $ETHX vf $VF_NUM state disable' to completely shutdown the VF's queues making it entirely disabled and not able to receive or send any traffic. Modify the behavior of the 'ip link set $ETHX vf $VF_NUM state enable' command to make a VF do reinitialization bringing the queues back up. Co-developed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>

Currently the driver allows to configure matching by VLAN EtherType. However, the retrieval function does not report it back to the user. Add it. Before: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | Action: Direct to queue 0 After: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x8100 mask: 0x0 | VLAN: 0x0 mask: 0xffff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 0 Fixes: 2b477d0 ("igc: Integrate flex filter into ethtool ops") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>

Store subfunction and VF pointer in port representor structure as an union. Add port representor type to distinguish between each of them. Keep the same flow of port representor creation, but instead of general attach function create helpers for VF and subfunction attach function. Type of port representor can be also known based on VSI type, but it is more clean to have it directly saved in port representor structure. Create port representor when subfunction port is activated. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>

Now there is another type of port representor. Correct checking if parent device is ready to reflect also new PR type. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>

Subfunction port representor needs the basic netdevice ops to work correctly. Create them. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>

Flow for creating Tx topology is the same as for VF port representors, but the devlink port is stored in different place (sf->devlink_port). When creating VF devlink lock isn't taken, when creating subfunction it is. Setting Tx topology function needs to take this lock, check if it was taken before to not do it twice. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>

Implement add / delete vlan for subfunction type VSI. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>

When processing a packed profile in unpack_profile() described like "profile :ns::samba-dcerpcd /usr/lib*/samba/{,samba/}samba-dcerpcd {...}" a string ":samba-dcerpcd" is unpacked as a fully-qualified name and then passed to aa_splitn_fqname(). aa_splitn_fqname() treats ":samba-dcerpcd" as only containing a namespace. Thus it returns NULL for tmpname, meanwhile tmpns is non-NULL. Later aa_alloc_profile() crashes as the new profile name is NULL now. general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 6 PID: 1657 Comm: apparmor_parser Not tainted 6.7.0-rc2-dirty torvalds#16 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:strlen+0x1e/0xa0 Call Trace: <TASK> ? strlen+0x1e/0xa0 aa_policy_init+0x1bb/0x230 aa_alloc_profile+0xb1/0x480 unpack_profile+0x3bc/0x4960 aa_unpack+0x309/0x15e0 aa_replace_profiles+0x213/0x33c0 policy_update+0x261/0x370 profile_replace+0x20e/0x2a0 vfs_write+0x2af/0xe00 ksys_write+0x126/0x250 do_syscall_64+0x46/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:strlen+0x1e/0xa0 It seems such behaviour of aa_splitn_fqname() is expected and checked in other places where it is called (e.g. aa_remove_profiles). Well, there is an explicit comment "a ns name without a following profile is allowed" inside. AFAICS, nothing can prevent unpacked "name" to be in form like ":samba-dcerpcd" - it is passed from userspace. Deny the whole profile set replacement in such case and inform user with EPROTO and an explaining message. Found by Linux Verification Center (linuxtesting.org). Fixes: 04dc715 ("apparmor: audit policy ns specified in policy load") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: John Johansen <john.johansen@canonical.com>

====================================================== WARNING: possible circular locking dependency detected 6.5.0-kfd-fkuehlin torvalds#276 Not tainted ------------------------------------------------------ kworker/8:2/2676 is trying to acquire lock: ffff9435aae95c88 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}, at: __flush_work+0x52/0x550 but task is already holding lock: ffff9435cd8e1720 (&svms->lock){+.+.}-{3:3}, at: svm_range_deferred_list_work+0xe8/0x340 [amdgpu] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&svms->lock){+.+.}-{3:3}: __mutex_lock+0x97/0xd30 kfd_ioctl_alloc_memory_of_gpu+0x6d/0x3c0 [amdgpu] kfd_ioctl+0x1b2/0x5d0 [amdgpu] __x64_sys_ioctl+0x86/0xc0 do_syscall_64+0x39/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #1 (&mm->mmap_lock){++++}-{3:3}: down_read+0x42/0x160 svm_range_evict_svm_bo_worker+0x8b/0x340 [amdgpu] process_one_work+0x27a/0x540 worker_thread+0x53/0x3e0 kthread+0xeb/0x120 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x11/0x20 -> #0 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}: __lock_acquire+0x1426/0x2200 lock_acquire+0xc1/0x2b0 __flush_work+0x80/0x550 __cancel_work_timer+0x109/0x190 svm_range_bo_release+0xdc/0x1c0 [amdgpu] svm_range_free+0x175/0x180 [amdgpu] svm_range_deferred_list_work+0x15d/0x340 [amdgpu] process_one_work+0x27a/0x540 worker_thread+0x53/0x3e0 kthread+0xeb/0x120 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x11/0x20 other info that might help us debug this: Chain exists of: (work_completion)(&svm_bo->eviction_work) --> &mm->mmap_lock --> &svms->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&svms->lock); lock(&mm->mmap_lock); lock(&svms->lock); lock((work_completion)(&svm_bo->eviction_work)); I believe this cannot really lead to a deadlock in practice, because svm_range_evict_svm_bo_worker only takes the mmap_read_lock if the BO refcount is non-0. That means it's impossible that svm_range_bo_release is running concurrently. However, there is no good way to annotate this. To avoid the problem, take a BO reference in svm_range_schedule_evict_svm_bo instead of in the worker. That way it's impossible for a BO to get freed while eviction work is pending and the cancel_work_sync call in svm_range_bo_release can be eliminated. v2: Use svm_bo_ref_unless_zero and explained why that's safe. Also removed redundant checks that are already done in amdkfd_fence_enable_signaling. Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

====================================================== WARNING: possible circular locking dependency detected 6.5.0-kfd-yangp #2289 Not tainted ------------------------------------------------------ kworker/0:2/996 is trying to acquire lock: (srcu){.+.+}-{0:0}, at: __synchronize_srcu+0x5/0x1a0 but task is already holding lock: ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}, at: process_one_work+0x211/0x560 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}: __flush_work+0x88/0x4f0 svm_range_list_lock_and_flush_work+0x3d/0x110 [amdgpu] svm_range_set_attr+0xd6/0x14c0 [amdgpu] kfd_ioctl+0x1d1/0x630 [amdgpu] __x64_sys_ioctl+0x88/0xc0 -> #2 (&info->lock#2){+.+.}-{3:3}: __mutex_lock+0x99/0xc70 amdgpu_amdkfd_gpuvm_restore_process_bos+0x54/0x740 [amdgpu] restore_process_helper+0x22/0x80 [amdgpu] restore_process_worker+0x2d/0xa0 [amdgpu] process_one_work+0x29b/0x560 worker_thread+0x3d/0x3d0 -> #1 ((work_completion)(&(&process->restore_work)->work)){+.+.}-{0:0}: __flush_work+0x88/0x4f0 __cancel_work_timer+0x12c/0x1c0 kfd_process_notifier_release_internal+0x37/0x1f0 [amdgpu] __mmu_notifier_release+0xad/0x240 exit_mmap+0x6a/0x3a0 mmput+0x6a/0x120 do_exit+0x322/0xb90 do_group_exit+0x37/0xa0 __x64_sys_exit_group+0x18/0x20 do_syscall_64+0x38/0x80 -> #0 (srcu){.+.+}-{0:0}: __lock_acquire+0x1521/0x2510 lock_sync+0x5f/0x90 __synchronize_srcu+0x4f/0x1a0 __mmu_notifier_release+0x128/0x240 exit_mmap+0x6a/0x3a0 mmput+0x6a/0x120 svm_range_deferred_list_work+0x19f/0x350 [amdgpu] process_one_work+0x29b/0x560 worker_thread+0x3d/0x3d0 other info that might help us debug this: Chain exists of: srcu --> &info->lock#2 --> (work_completion)(&svms->deferred_list_work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&svms->deferred_list_work)); lock(&info->lock#2); lock((work_completion)(&svms->deferred_list_work)); sync(srcu); Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When QoS is disabled, the queue priority value will not map to the correct ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS is disabled to prevent trying to stop/wake a non-existent queue and failing to stop/wake the actual queue instantiated. Log of issue before change (with kernel parameter qos=0): [ +5.112651] ------------[ cut here ]------------ [ +0.000005] WARNING: CPU: 7 PID: 25513 at net/mac80211/util.c:449 __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000067] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3 [ +0.000044] videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common [ +0.000055] usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43(O)] [ +0.000009] CPU: 7 PID: 25513 Comm: irq/17-b43 Tainted: G W O 6.6.7 #1-NixOS [ +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019 [ +0.000001] RIP: 0010:__ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000046] Code: 00 45 85 e4 0f 85 9b 00 00 00 48 8d bd 40 09 00 00 f0 48 0f ba ad 48 09 00 00 00 72 0f 5b 5d 41 5c 41 5d 41 5e e9 cb 6d 3c d0 <0f> 0b 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc 48 8d b4 16 94 00 00 [ +0.000002] RSP: 0018:ffffc90003c77d60 EFLAGS: 00010097 [ +0.000001] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000 [ +0.000001] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff88820b924900 [ +0.000002] RBP: ffff88820b924900 R08: ffffc90003c77d90 R09: 000000000003bfd0 [ +0.000001] R10: ffff88820b924900 R11: ffffc90003c77c68 R12: 0000000000000000 [ +0.000001] R13: 0000000000000000 R14: ffffc90003c77d90 R15: ffffffffc0fa6f40 [ +0.000001] FS: 0000000000000000(0000) GS:ffff88846fb80000(0000) knlGS:0000000000000000 [ +0.000001] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000001] CR2: 00007fafda7ae008 CR3: 000000046d220005 CR4: 00000000000606e0 [ +0.000002] Call Trace: [ +0.000003] <TASK> [ +0.000001] ? __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000044] ? __warn+0x81/0x130 [ +0.000005] ? __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000045] ? report_bug+0x171/0x1a0 [ +0.000004] ? handle_bug+0x41/0x70 [ +0.000004] ? exc_invalid_op+0x17/0x70 [ +0.000003] ? asm_exc_invalid_op+0x1a/0x20 [ +0.000005] ? __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000043] ieee80211_wake_queue+0x4a/0x80 [mac80211] [ +0.000044] b43_dma_handle_txstatus+0x29c/0x3a0 [b43] [ +0.000016] ? __pfx_irq_thread_fn+0x10/0x10 [ +0.000002] b43_handle_txstatus+0x61/0x80 [b43] [ +0.000012] b43_interrupt_thread_handler+0x3f9/0x6b0 [b43] [ +0.000011] irq_thread_fn+0x23/0x60 [ +0.000002] irq_thread+0xfe/0x1c0 [ +0.000002] ? __pfx_irq_thread_dtor+0x10/0x10 [ +0.000001] ? __pfx_irq_thread+0x10/0x10 [ +0.000001] kthread+0xe8/0x120 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000003] ret_from_fork+0x34/0x50 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000002] ret_from_fork_asm+0x1b/0x30 [ +0.000004] </TASK> [ +0.000001] ---[ end trace 0000000000000000 ]--- [ +0.000065] ------------[ cut here ]------------ [ +0.000001] WARNING: CPU: 0 PID: 56077 at net/mac80211/util.c:514 __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000077] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3 [ +0.000073] videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common [ +0.000084] usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43] [ +0.000012] CPU: 0 PID: 56077 Comm: kworker/u16:17 Tainted: G W O 6.6.7 #1-NixOS [ +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019 [ +0.000001] Workqueue: phy7 b43_tx_work [b43] [ +0.000019] RIP: 0010:__ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000076] Code: 74 11 48 8b 78 08 0f b7 d6 89 e9 4c 89 e6 e8 ab f4 00 00 65 ff 0d 9c b7 34 3f 0f 85 55 ff ff ff 0f 1f 44 00 00 e9 4b ff ff ff <0f> 0b 5b 5d 41 5c 41 5d c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 [ +0.000002] RSP: 0000:ffffc90004157d50 EFLAGS: 00010097 [ +0.000002] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000 [ +0.000002] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8882d65d0900 [ +0.000002] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ +0.000001] R10: 00000000000000ff R11: ffff88814d0155a0 R12: ffff8882d65d0900 [ +0.000002] R13: 0000000000000000 R14: ffff8881002d2800 R15: 00000000000000d0 [ +0.000002] FS: 0000000000000000(0000) GS:ffff88846f800000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000002] CR2: 00007f2e8c10c880 CR3: 0000000385b66005 CR4: 00000000000606f0 [ +0.000002] Call Trace: [ +0.000001] <TASK> [ +0.000001] ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000075] ? __warn+0x81/0x130 [ +0.000004] ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000075] ? report_bug+0x171/0x1a0 [ +0.000005] ? handle_bug+0x41/0x70 [ +0.000003] ? exc_invalid_op+0x17/0x70 [ +0.000004] ? asm_exc_invalid_op+0x1a/0x20 [ +0.000004] ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000076] ieee80211_stop_queue+0x36/0x50 [mac80211] [ +0.000077] b43_dma_tx+0x550/0x780 [b43] [ +0.000023] b43_tx_work+0x90/0x130 [b43] [ +0.000018] process_one_work+0x174/0x340 [ +0.000003] worker_thread+0x27b/0x3a0 [ +0.000004] ? __pfx_worker_thread+0x10/0x10 [ +0.000002] kthread+0xe8/0x120 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000004] ret_from_fork+0x34/0x50 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000003] ret_from_fork_asm+0x1b/0x30 [ +0.000006] </TASK> [ +0.000001] ---[ end trace 0000000000000000 ]--- Fixes: e6f5b93 ("b43: Add QOS support") Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231231050300.122806-2-sergeantsagara@protonmail.com

Currently, if `v3d_job_init()` fails (e.g. in the IGT test "bad-in-sync", where we submit an invalid in-sync to the IOCTL), then we end up with the following NULL pointer dereference: [ 34.146279] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000078 [ 34.146301] Mem abort info: [ 34.146306] ESR = 0x0000000096000005 [ 34.146315] EC = 0x25: DABT (current EL), IL = 32 bits [ 34.146322] SET = 0, FnV = 0 [ 34.146328] EA = 0, S1PTW = 0 [ 34.146334] FSC = 0x05: level 1 translation fault [ 34.146340] Data abort info: [ 34.146345] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 34.146351] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 34.146357] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 34.146366] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001232e6000 [ 34.146375] [0000000000000078] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 34.146399] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 34.146406] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device algif_hash aes_neon_bs aes_neon_blk algif_skcipher af_alg bnep hid_logitech_hidpp brcmfmac_wcc brcmfmac brcmutil hci_uart vc4 btbcm cfg80211 bluetooth bcm2835_v4l2(C) snd_soc_hdmi_codec binfmt_misc cec drm_display_helper hid_logitech_dj bcm2835_mmal_vchiq(C) drm_dma_helper drm_kms_helper videobuf2_v4l2 raspberrypi_hwmon ecdh_generic videobuf2_vmalloc videobuf2_memops ecc videobuf2_common rfkill videodev libaes snd_soc_core dwc2 i2c_brcmstb snd_pcm_dmaengine snd_bcm2835(C) i2c_bcm2835 pwm_bcm2835 snd_pcm mc v3d snd_timer snd gpu_sched drm_shmem_helper nvmem_rmem uio_pdrv_genirq uio i2c_dev drm fuse dm_mod drm_panel_orientation_quirks backlight configfs ip_tables x_tables ipv6 [ 34.146556] CPU: 1 PID: 1890 Comm: v3d_submit_csd Tainted: G C 6.7.0-rc3-g49ddab089611 torvalds#68 [ 34.146563] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 34.146569] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 34.146575] pc : drm_sched_job_cleanup+0x3c/0x190 [gpu_sched] [ 34.146611] lr : v3d_submit_csd_ioctl+0x1b4/0x460 [v3d] [ 34.146653] sp : ffffffc083cbbb80 [ 34.146658] x29: ffffffc083cbbb90 x28: ffffff81035afc00 x27: ffffffe77a641168 [ 34.146668] x26: ffffff81056a8000 x25: 0000000000000058 x24: 0000000000000000 [ 34.146677] x23: ffffff81065e2000 x22: ffffff81035afe00 x21: ffffffc083cbbcf0 [ 34.146686] x20: ffffff81035afe00 x19: 00000000ffffffea x18: 0000000000000000 [ 34.146694] x17: 0000000000000000 x16: ffffffe7989e34b0 x15: 0000000000000000 [ 34.146703] x14: 0000000004000004 x13: ffffff81035afe80 x12: ffffffc083cb8000 [ 34.146711] x11: cc57e05dfbe5ef00 x10: cc57e05dfbe5ef00 x9 : ffffffe77a64131c [ 34.146719] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f [ 34.146727] x5 : 0000000000000040 x4 : ffffff81fefb03f0 x3 : ffffffc083cbba40 [ 34.146736] x2 : ffffff81056a8000 x1 : ffffffe7989e35e8 x0 : 0000000000000000 [ 34.146745] Call trace: [ 34.146748] drm_sched_job_cleanup+0x3c/0x190 [gpu_sched] [ 34.146768] v3d_submit_csd_ioctl+0x1b4/0x460 [v3d] [ 34.146791] drm_ioctl_kernel+0xe0/0x120 [drm] [ 34.147029] drm_ioctl+0x264/0x408 [drm] [ 34.147135] __arm64_sys_ioctl+0x9c/0xe0 [ 34.147152] invoke_syscall+0x4c/0x118 [ 34.147162] el0_svc_common+0xb8/0xf0 [ 34.147168] do_el0_svc+0x28/0x40 [ 34.147174] el0_svc+0x38/0x88 [ 34.147184] el0t_64_sync_handler+0x84/0x100 [ 34.147191] el0t_64_sync+0x190/0x198 [ 34.147201] Code: aa0003f4 f90007e8 f9401008 aa0803e0 (b8478c09) [ 34.147210] ---[ end trace 0000000000000000 ]--- This happens because we are calling `drm_sched_job_cleanup()` twice: once at `v3d_job_init()` and again when we call `v3d_job_cleanup()`. To mitigate this issue, we can return to the same approach that we used to use before 464c61e: deallocate the job after `v3d_job_init()` fails and assign it to NULL. Then, when we call `v3d_job_cleanup()`, job is NULL and the function returns. Fixes: 464c61e ("drm/v3d: Decouple job allocation from job initiation") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240109142857.1122704-1-mcanal@igalia.com

The btrfs CI reported a lockdep warning as follows by running generic generic/129. WARNING: possible circular locking dependency detected 6.7.0-rc5+ #1 Not tainted ------------------------------------------------------ kworker/u5:5/793427 is trying to acquire lock: ffff88813256d028 (&cache->lock){+.+.}-{2:2}, at: btrfs_zone_finish_one_bg+0x5e/0x130 but task is already holding lock: ffff88810a23a318 (&fs_info->zone_active_bgs_lock){+.+.}-{2:2}, at: btrfs_zone_finish_one_bg+0x34/0x130 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&fs_info->zone_active_bgs_lock){+.+.}-{2:2}: ... -> #0 (&cache->lock){+.+.}-{2:2}: ... This is because we take fs_info->zone_active_bgs_lock after a block_group's lock in btrfs_zone_activate() while doing the opposite in other places. Fix the issue by expanding the fs_info->zone_active_bgs_lock's critical section and taking it before a block_group's lock. Fixes: a7e1ac7 ("btrfs: zoned: reserve zones for an active metadata/system block group") CC: stable@vger.kernel.org # 6.6 Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

QXL driver doesn't use any device for DMA mappings or allocations so dev_to_node() will panic inside ttm_device_init() on NUMA systems: general protection fault, probably for non-canonical address 0xdffffc000000007a: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000003d0-0x00000000000003d7] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.7.0+ torvalds#9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:ttm_device_init+0x10e/0x340 Call Trace: <TASK> qxl_ttm_init+0xaa/0x310 qxl_device_init+0x1071/0x2000 qxl_pci_probe+0x167/0x3f0 local_pci_probe+0xe1/0x1b0 pci_device_probe+0x29d/0x790 really_probe+0x251/0x910 __driver_probe_device+0x1ea/0x390 driver_probe_device+0x4e/0x2e0 __driver_attach+0x1e3/0x600 bus_for_each_dev+0x12d/0x1c0 bus_add_driver+0x25a/0x590 driver_register+0x15c/0x4b0 qxl_pci_driver_init+0x67/0x80 do_one_initcall+0xf5/0x5d0 kernel_init_freeable+0x637/0xb10 kernel_init+0x1c/0x2e0 ret_from_fork+0x48/0x80 ret_from_fork_asm+0x1b/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:ttm_device_init+0x10e/0x340 Fall back to NUMA_NO_NODE if there is no device for DMA. Found by Linux Verification Center (linuxtesting.org). Fixes: b0a7ce5 ("drm/ttm: Schedule delayed_delete worker closer") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Link: https://patchwork.freedesktop.org/patch/msgid/20240113213347.9562-1-pchelkin@ispras.ru Signed-off-by: Christian König <christian.koenig@amd.com>

The driver relies on netdev_get_num_tc() to get the number of HW offloaded mqprio TCs to allocate and free TX rings. This won't work and can potentially crash the system if software mqprio or taprio TCs have been setup. netdev_get_num_tc() will return the number of software TCs and it may cause the driver to allocate or free more TX rings that it should. Fix it by adding a bp->num_tc field to store the number of HW offload mqprio TCs for the device. Use bp->num_tc instead of netdev_get_num_tc(). This fixes a crash like this: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 42b8404067 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 120 PID: 8661 Comm: ifconfig Kdump: loaded Tainted: G OE 5.18.16 #1 Hardware name: Lenovo ThinkSystem SR650 V3/SB27A92818, BIOS ESE114N-2.12 04/25/2023 RIP: 0010:bnxt_hwrm_cp_ring_alloc_p5+0x10/0x90 [bnxt_en] Code: 41 5c 41 5d 41 5e c3 cc cc cc cc 41 8b 44 24 08 66 89 03 eb c6 e8 b0 f1 7d db 0f 1f 44 00 00 41 56 41 55 41 54 55 48 89 fd 53 <48> 8b 06 48 89 f3 48 81 c6 28 01 00 00 0f b6 96 13 ff ff ff 44 8b RSP: 0018:ff65907660d1fa88 EFLAGS: 00010202 RAX: 0000000000000010 RBX: ff4dde1d907e4980 RCX: f400000000000000 RDX: 0000000000000010 RSI: 0000000000000000 RDI: ff4dde1d907e4980 RBP: ff4dde1d907e4980 R08: 000000000000000f R09: 0000000000000000 R10: ff4dde5f02671800 R11: 0000000000000008 R12: 0000000088888889 R13: 0500000000000000 R14: 00f0000000000000 R15: ff4dde5f02671800 FS: 00007f4b126b5740(0000) GS:ff4dde9bff600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000416f9c6002 CR4: 0000000000771ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> bnxt_hwrm_ring_alloc+0x204/0x770 [bnxt_en] bnxt_init_chip+0x4d/0x680 [bnxt_en] ? bnxt_poll+0x1a0/0x1a0 [bnxt_en] __bnxt_open_nic+0xd2/0x740 [bnxt_en] bnxt_open+0x10b/0x220 [bnxt_en] ? raw_notifier_call_chain+0x41/0x60 __dev_open+0xf3/0x1b0 __dev_change_flags+0x1db/0x250 dev_change_flags+0x21/0x60 devinet_ioctl+0x590/0x720 ? avc_has_extended_perms+0x1b7/0x420 ? _copy_from_user+0x3a/0x60 inet_ioctl+0x189/0x1c0 ? wp_page_copy+0x45a/0x6e0 sock_do_ioctl+0x42/0xf0 ? ioctl_has_perm.constprop.0.isra.0+0xbd/0x120 sock_ioctl+0x1ce/0x2e0 __x64_sys_ioctl+0x87/0xc0 do_syscall_64+0x59/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x69/0x90 ? exc_page_fault+0x62/0x150 Fixes: c0c050c ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240117234515.226944-6-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot was able to trick llc_ui_sendmsg(), allocating an skb with no headroom, but subsequently trying to push 14 bytes of Ethernet header [1] Like some others, llc_ui_sendmsg() releases the socket lock before calling sock_alloc_send_skb(). Then it acquires it again, but does not redo all the sanity checks that were performed. This fix: - Uses LL_RESERVED_SPACE() to reserve space. - Check all conditions again after socket lock is held again. - Do not account Ethernet header for mtu limitation. [1] skbuff: skb_under_panic: text:ffff800088baa334 len:1514 put:14 head:ffff0000c9c37000 data:ffff0000c9c36ff2 tail:0x5dc end:0x6c0 dev:bond0 kernel BUG at net/core/skbuff.c:193 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6875 Comm: syz-executor.0 Not tainted 6.7.0-rc8-syzkaller-00101-g0802e17d9aca-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:189 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 lr : skb_panic net/core/skbuff.c:189 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 sp : ffff800096f97000 x29: ffff800096f97010 x28: ffff80008cc8d668 x27: dfff800000000000 x26: ffff0000cb970c90 x25: 00000000000005dc x24: ffff0000c9c36ff2 x23: ffff0000c9c37000 x22: 00000000000005ea x21: 00000000000006c0 x20: 000000000000000e x19: ffff800088baa334 x18: 1fffe000368261ce x17: ffff80008e4ed000 x16: ffff80008a8310f8 x15: 0000000000000001 x14: 1ffff00012df2d58 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000ff0100 x9 : e28a51f1087e8400 x8 : e28a51f1087e8400 x7 : ffff80008028f8d0 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : ffff800082b78714 x2 : 0000000000000001 x1 : 0000000100000000 x0 : 0000000000000089 Call trace: skb_panic net/core/skbuff.c:189 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 skb_push+0xf0/0x108 net/core/skbuff.c:2451 eth_header+0x44/0x1f8 net/ethernet/eth.c:83 dev_hard_header include/linux/netdevice.h:3188 [inline] llc_mac_hdr_init+0x110/0x17c net/llc/llc_output.c:33 llc_sap_action_send_xid_c+0x170/0x344 net/llc/llc_s_ac.c:85 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x1ec/0x774 net/llc/llc_sap.c:209 llc_build_and_send_xid_pkt+0x12c/0x1c0 net/llc/llc_sap.c:270 llc_ui_sendmsg+0x7bc/0xb1c net/llc/af_llc.c:997 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x194/0x274 net/socket.c:767 splice_to_socket+0x7cc/0xd58 fs/splice.c:881 do_splice_from fs/splice.c:933 [inline] direct_splice_actor+0xe4/0x1c0 fs/splice.c:1142 splice_direct_to_actor+0x2a0/0x7e4 fs/splice.c:1088 do_splice_direct+0x20c/0x348 fs/splice.c:1194 do_sendfile+0x4bc/0xc70 fs/read_write.c:1254 __do_sys_sendfile64 fs/read_write.c:1322 [inline] __se_sys_sendfile64 fs/read_write.c:1308 [inline] __arm64_sys_sendfile64+0x160/0x3b4 fs/read_write.c:1308 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x54/0x158 arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:595 Code: aa1803e6 aa1903e7 a90023f5 94792f6a (d4210000) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+2a7024e9502df538e8ef@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240118183625.4007013-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut. It should be freed by kvfree not kfree. Or umount will triger: [ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008 [ 406.830676 ] #PF: supervisor read access in kernel mode [ 406.831643 ] #PF: error_code(0x0000) - not-present page [ 406.832487 ] PGD 0 P4D 0 [ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI [ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ torvalds#90 [ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 406.835796 ] RIP: 0010:kfree+0x62/0x140 [ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6 [ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286 [ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4 [ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000 [ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001 [ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80 [ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000 [ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000 [ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0 [ 406.841464 ] Call Trace: [ 406.841583 ] <TASK> [ 406.841682 ] ? __die+0x1f/0x70 [ 406.841828 ] ? page_fault_oops+0x159/0x470 [ 406.842014 ] ? fixup_exception+0x22/0x310 [ 406.842198 ] ? exc_page_fault+0x1ed/0x200 [ 406.842382 ] ? asm_exc_page_fault+0x22/0x30 [ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs] [ 406.842842 ] ? kfree+0x62/0x140 [ 406.842988 ] ? kfree+0x104/0x140 [ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs] [ 406.843390 ] kobject_put+0xb7/0x170 [ 406.843552 ] deactivate_locked_super+0x2f/0xa0 [ 406.843756 ] cleanup_mnt+0xba/0x150 [ 406.843917 ] task_work_run+0x59/0xa0 [ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0 [ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40 [ 406.844510 ] do_syscall_64+0x4e/0xf0 [ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 406.844907 ] RIP: 0033:0x7f0a2664e4fb Signed-off-by: Su Yue <glass.su@suse.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When I was testing mongodb over bcachefs with compression, there is a lockdep warning when snapshotting mongodb data volume. $ cat test.sh prog=bcachefs $prog subvolume create /mnt/data $prog subvolume create /mnt/data/snapshots while true;do $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s) sleep 1s done $ cat /etc/mongodb.conf systemLog: destination: file logAppend: true path: /mnt/data/mongod.log storage: dbPath: /mnt/data/ lockdep reports: [ 3437.452330] ====================================================== [ 3437.452750] WARNING: possible circular locking dependency detected [ 3437.453168] 6.7.0-rc7-custom+ torvalds#85 Tainted: G E [ 3437.453562] ------------------------------------------------------ [ 3437.453981] bcachefs/35533 is trying to acquire lock: [ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190 [ 3437.454875] but task is already holding lock: [ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.456009] which lock already depends on the new lock. [ 3437.456553] the existing dependency chain (in reverse order) is: [ 3437.457054] -> #3 (&type->s_umount_key#48){.+.+}-{3:3}: [ 3437.457507] down_read+0x3e/0x170 [ 3437.457772] bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.458206] __x64_sys_ioctl+0x93/0xd0 [ 3437.458498] do_syscall_64+0x42/0xf0 [ 3437.458779] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.459155] -> #2 (&c->snapshot_create_lock){++++}-{3:3}: [ 3437.459615] down_read+0x3e/0x170 [ 3437.459878] bch2_truncate+0x82/0x110 [bcachefs] [ 3437.460276] bchfs_truncate+0x254/0x3c0 [bcachefs] [ 3437.460686] notify_change+0x1f1/0x4a0 [ 3437.461283] do_truncate+0x7f/0xd0 [ 3437.461555] path_openat+0xa57/0xce0 [ 3437.461836] do_filp_open+0xb4/0x160 [ 3437.462116] do_sys_openat2+0x91/0xc0 [ 3437.462402] __x64_sys_openat+0x53/0xa0 [ 3437.462701] do_syscall_64+0x42/0xf0 [ 3437.462982] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.463359] -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}: [ 3437.463843] down_write+0x3b/0xc0 [ 3437.464223] bch2_write_iter+0x5b/0xcc0 [bcachefs] [ 3437.464493] vfs_write+0x21b/0x4c0 [ 3437.464653] ksys_write+0x69/0xf0 [ 3437.464839] do_syscall_64+0x42/0xf0 [ 3437.465009] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.465231] -> #0 (sb_writers#10){.+.+}-{0:0}: [ 3437.465471] __lock_acquire+0x1455/0x21b0 [ 3437.465656] lock_acquire+0xc6/0x2b0 [ 3437.465822] mnt_want_write+0x46/0x1a0 [ 3437.465996] filename_create+0x62/0x190 [ 3437.466175] user_path_create+0x2d/0x50 [ 3437.466352] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.466617] __x64_sys_ioctl+0x93/0xd0 [ 3437.466791] do_syscall_64+0x42/0xf0 [ 3437.466957] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.467180] other info that might help us debug this: [ 3437.469670] 2 locks held by bcachefs/35533: other info that might help us debug this: [ 3437.467507] Chain exists of: sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48 [ 3437.467979] Possible unsafe locking scenario: [ 3437.468223] CPU0 CPU1 [ 3437.468405] ---- ---- [ 3437.468585] rlock(&type->s_umount_key#48); [ 3437.468758] lock(&c->snapshot_create_lock); [ 3437.469030] lock(&type->s_umount_key#48); [ 3437.469291] rlock(sb_writers#10); [ 3437.469434] *** DEADLOCK *** [ 3437.469670] 2 locks held by bcachefs/35533: [ 3437.469838] #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs] [ 3437.470294] #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.470744] stack backtrace: [ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G E 6.7.0-rc7-custom+ torvalds#85 [ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 3437.471694] Call Trace: [ 3437.471795] <TASK> [ 3437.471884] dump_stack_lvl+0x57/0x90 [ 3437.472035] check_noncircular+0x132/0x150 [ 3437.472202] __lock_acquire+0x1455/0x21b0 [ 3437.472369] lock_acquire+0xc6/0x2b0 [ 3437.472518] ? filename_create+0x62/0x190 [ 3437.472683] ? lock_is_held_type+0x97/0x110 [ 3437.472856] mnt_want_write+0x46/0x1a0 [ 3437.473025] ? filename_create+0x62/0x190 [ 3437.473204] filename_create+0x62/0x190 [ 3437.473380] user_path_create+0x2d/0x50 [ 3437.473555] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.473819] ? lock_acquire+0xc6/0x2b0 [ 3437.474002] ? __fget_files+0x2a/0x190 [ 3437.474195] ? __fget_files+0xbc/0x190 [ 3437.474380] ? lock_release+0xc5/0x270 [ 3437.474567] ? __x64_sys_ioctl+0x93/0xd0 [ 3437.474764] ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs] [ 3437.475090] __x64_sys_ioctl+0x93/0xd0 [ 3437.475277] do_syscall_64+0x42/0xf0 [ 3437.475454] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.475691] RIP: 0033:0x7f2743c313af ====================================================== In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally and unlock it at the end of the function. There is a comment "why do we need this lock?" about the lock coming from commit 42d2373 ("bcachefs: Snapshot creation, deletion") The reason is that __bch2_ioctl_subvolume_create() calls sync_inodes_sb() which enforce locked s_umount to writeback all dirty nodes before doing snapshot works. Fix it by read locking s_umount for snapshotting only and unlocking s_umount after sync_inodes_sb(). Signed-off-by: Su Yue <glass.su@suse.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Arkadiusz Kubalewski says: ==================== dpll: fix unordered unbind/bind registerer issues Fix issues when performing unordered unbind/bind of a kernel modules which are using a dpll device with DPLL_PIN_TYPE_MUX pins. Currently only serialized bind/unbind of such use case works, fix the issues and allow for unserialized kernel module bind order. The issues are observed on the ice driver, i.e., $ echo 0000:af:00.0 > /sys/bus/pci/drivers/ice/unbind $ echo 0000:af:00.1 > /sys/bus/pci/drivers/ice/unbind results in: ice 0000:af:00.0: Removed PTP clock BUG: kernel NULL pointer dereference, address: 0000000000000010 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 71848 Comm: bash Kdump: loaded Not tainted 6.6.0-rc5_next-queue_19th-Oct-2023-01625-g039e5d15e451 #1 Hardware name: Intel Corporation S2600STB/S2600STB, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 RIP: 0010:ice_dpll_rclk_state_on_pin_get+0x2f/0x90 [ice] Code: 41 57 4d 89 cf 41 56 41 55 4d 89 c5 41 54 55 48 89 f5 53 4c 8b 66 08 48 89 cb 4d 8d b4 24 f0 49 00 00 4c 89 f7 e8 71 ec 1f c5 <0f> b6 5b 10 41 0f b6 84 24 30 4b 00 00 29 c3 41 0f b6 84 24 28 4b RSP: 0018:ffffc902b179fb60 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff8882c1398000 RSI: ffff888c7435cc60 RDI: ffff888c7435cb90 RBP: ffff888c7435cc60 R08: ffffc902b179fbb0 R09: 0000000000000000 R10: ffff888ef1fc8050 R11: fffffffffff82700 R12: ffff888c743581a0 R13: ffffc902b179fbb0 R14: ffff888c7435cb90 R15: 0000000000000000 FS: 00007fdc7dae0740(0000) GS:ffff888c105c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000000132c24002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x76/0x170 ? exc_page_fault+0x65/0x150 ? asm_exc_page_fault+0x22/0x30 ? ice_dpll_rclk_state_on_pin_get+0x2f/0x90 [ice] ? __pfx_ice_dpll_rclk_state_on_pin_get+0x10/0x10 [ice] dpll_msg_add_pin_parents+0x142/0x1d0 dpll_pin_event_send+0x7d/0x150 dpll_pin_on_pin_unregister+0x3f/0x100 ice_dpll_deinit_pins+0xa1/0x230 [ice] ice_dpll_deinit+0x29/0xe0 [ice] ice_remove+0xcd/0x200 [ice] pci_device_remove+0x33/0xa0 device_release_driver_internal+0x193/0x200 unbind_store+0x9d/0xb0 kernfs_fop_write_iter+0x128/0x1c0 vfs_write+0x2bb/0x3e0 ksys_write+0x5f/0xe0 do_syscall_64+0x59/0x90 ? filp_close+0x1b/0x30 ? do_dup2+0x7d/0xd0 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7fdc7d93eb97 Code: 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007fff2aa91028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fdc7d93eb97 RDX: 000000000000000d RSI: 00005644814ec9b0 RDI: 0000000000000001 RBP: 00005644814ec9b0 R08: 0000000000000000 R09: 00007fdc7d9b14e0 R10: 00007fdc7d9b13e0 R11: 0000000000000246 R12: 000000000000000d R13: 00007fdc7d9fb780 R14: 000000000000000d R15: 00007fdc7d9f69e0 </TASK> Modules linked in: uinput vfio_pci vfio_pci_core vfio_iommu_type1 vfio irqbypass ixgbevf snd_seq_dummy snd_hrtimer snd_seq snd_timer snd_seq_device snd soundcore overlay qrtr rfkill vfat fat xfs libcrc32c rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm intel_rapl_msr intel_rapl_common intel_uncore_frequency intel_uncore_frequency_common isst_if_common skx_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp irdma rapl intel_cstate ib_uverbs iTCO_wdt iTCO_vendor_support acpi_ipmi intel_uncore mei_me ipmi_si pcspkr i2c_i801 ib_core mei ipmi_devintf intel_pch_thermal ioatdma i2c_smbus ipmi_msghandler lpc_ich joydev acpi_power_meter acpi_pad ext4 mbcache jbd2 sd_mod t10_pi sg ast i2c_algo_bit drm_shmem_helper drm_kms_helper ice crct10dif_pclmul ixgbe crc32_pclmul drm crc32c_intel ahci i40e libahci ghash_clmulni_intel libata mdio dca gnss wmi fuse [last unloaded: iavf] CR2: 0000000000000010 v6: - fix memory corruption on error path in patch [v5 2/4] ==================== Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>

Syzcaller UBSAN crash occurs in rds_cmsg_recv(), which reads inc->i_rx_lat_trace[j + 1] with index 4 (3 + 1), but with array size of 4 (RDS_RX_MAX_TRACES). Here 'j' is assigned from rs->rs_rx_trace[i] and in-turn from trace.rx_trace_pos[i] in rds_recv_track_latency(), with both arrays sized 3 (RDS_MSG_RX_DGRAM_TRACE_MAX). So fix the off-by-one bounds check in rds_recv_track_latency() to prevent a potential crash in rds_cmsg_recv(). Found by syzcaller: ================================================================= UBSAN: array-index-out-of-bounds in net/rds/recv.c:585:39 index 4 is out of range for type 'u64 [4]' CPU: 1 PID: 8058 Comm: syz-executor228 Not tainted 6.6.0-gd2f51b3516da #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x136/0x150 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0xd5/0x130 lib/ubsan.c:348 rds_cmsg_recv+0x60d/0x700 net/rds/recv.c:585 rds_recvmsg+0x3fb/0x1610 net/rds/recv.c:716 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0xe2/0x160 net/socket.c:1066 __sys_recvfrom+0x1b6/0x2f0 net/socket.c:2246 __do_sys_recvfrom net/socket.c:2264 [inline] __se_sys_recvfrom net/socket.c:2260 [inline] __x64_sys_recvfrom+0xe0/0x1b0 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b ================================================================== Fixes: 3289025 ("RDS: add receive message trace used by application") Reported-by: Chenyuan Yang <chenyuan0y@gmail.com> Closes: https://lore.kernel.org/linux-rdma/CALGdzuoVdq-wtQ4Az9iottBqC5cv9ZhcE5q8N7LfYFvkRsOVcw@mail.gmail.com/ Signed-off-by: Sharath Srinivasan <sharath.srinivasan@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

The QXL driver doesn't use any device for DMA mappings or allocations so dev_to_node() will panic inside ttm_device_init() on NUMA systems: general protection fault, probably for non-canonical address 0xdffffc000000007a: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000003d0-0x00000000000003d7] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.7.0+ torvalds#9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:ttm_device_init+0x10e/0x340 Call Trace: qxl_ttm_init+0xaa/0x310 qxl_device_init+0x1071/0x2000 qxl_pci_probe+0x167/0x3f0 local_pci_probe+0xe1/0x1b0 pci_device_probe+0x29d/0x790 really_probe+0x251/0x910 __driver_probe_device+0x1ea/0x390 driver_probe_device+0x4e/0x2e0 __driver_attach+0x1e3/0x600 bus_for_each_dev+0x12d/0x1c0 bus_add_driver+0x25a/0x590 driver_register+0x15c/0x4b0 qxl_pci_driver_init+0x67/0x80 do_one_initcall+0xf5/0x5d0 kernel_init_freeable+0x637/0xb10 kernel_init+0x1c/0x2e0 ret_from_fork+0x48/0x80 ret_from_fork_asm+0x1b/0x30 RIP: 0010:ttm_device_init+0x10e/0x340 Fall back to NUMA_NO_NODE if there is no device for DMA. Found by Linux Verification Center (linuxtesting.org). Fixes: b0a7ce5 ("drm/ttm: Schedule delayed_delete worker closer") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Christian König <christian.koenig@amd.com> Reported-by: Steven Rostedt <rostedt@goodmis.org> Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We encountered a kernel crash triggered by the bpf_tcp_ca testcase as show below: Unable to handle kernel paging request at virtual address ff60000088554500 Oops [#1] ... CPU: 3 PID: 458 Comm: test_progs Tainted: G OE 6.8.0-rc1-kselftest_plain #1 Hardware name: riscv-virtio,qemu (DT) epc : 0xff60000088554500 ra : tcp_ack+0x288/0x1232 epc : ff60000088554500 ra : ffffffff80cc7166 sp : ff2000000117ba50 gp : ffffffff82587b60 tp : ff60000087be0040 t0 : ff60000088554500 t1 : ffffffff801ed24e t2 : 0000000000000000 s0 : ff2000000117bbc0 s1 : 0000000000000500 a0 : ff20000000691000 a1 : 0000000000000018 a2 : 0000000000000001 a3 : ff60000087be03a0 a4 : 0000000000000000 a5 : 0000000000000000 a6 : 0000000000000021 a7 : ffffffff8263f880 s2 : 000000004ac3c13b s3 : 000000004ac3c13a s4 : 0000000000008200 s5 : 0000000000000001 s6 : 0000000000000104 s7 : ff2000000117bb00 s8 : ff600000885544c0 s9 : 0000000000000000 s10: ff60000086ff0b80 s11: 000055557983a9c0 t3 : 0000000000000000 t4 : 000000000000ffc4 t5 : ffffffff8154f170 t6 : 0000000000000030 status: 0000000200000120 badaddr: ff60000088554500 cause: 000000000000000c Code: c796 67d7 0000 0000 0052 0002 c13b 4ac3 0000 0000 (0001) 0000 ---[ end trace 0000000000000000 ]--- The reason is that commit 2cd3e37 ("x86/cfi,bpf: Fix bpf_struct_ops CFI") changes the func_addr of arch_prepare_bpf_trampoline in struct_ops from NULL to non-NULL, while we use func_addr on RV64 to differentiate between struct_ops and regular trampoline. When the struct_ops testcase is triggered, it emits wrong prologue and epilogue, and lead to unpredictable issues. After commit 2cd3e37, we can use BPF_TRAMP_F_INDIRECT to distinguish them as it always be set in struct_ops. Fixes: 2cd3e37 ("x86/cfi,bpf: Fix bpf_struct_ops CFI") Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20240123023207.1917284-1-pulehui@huaweicloud.com

Hou Tao says: ==================== The motivation of inlining bpf_kptr_xchg() comes from the performance profiling of bpf memory allocator benchmark [1]. The benchmark uses bpf_kptr_xchg() to stash the allocated objects and to pop the stashed objects for free. After inling bpf_kptr_xchg(), the performance for object free on 8-CPUs VM increases about 2%~10%. However the performance gain comes with costs: both the kasan and kcsan checks on the pointer will be unavailable. Initially the inline is implemented in do_jit() for x86-64 directly, but I think it will more portable to implement the inline in verifier. Patch #1 supports inlining bpf_kptr_xchg() helper and enables it on x86-4. Patch #2 factors out a helper for newly-added test in patch #3. Patch #3 tests whether the inlining of bpf_kptr_xchg() is expected. Please see individual patches for more details. And comments are always welcome. Change Log: v3: * rebased on bpf-next tree * patch 1 & 2: Add Rvb-by and Ack-by tags from Eduard * patch 3: use inline assembly and naked function instead of c code (suggested by Eduard) v2: https://lore.kernel.org/bpf/20231223104042.1432300-1-houtao@huaweicloud.com/ * rebased on bpf-next tree * drop patch #1 in v1 due to discussion in [2] * patch #1: add the motivation in the commit message, merge patch #1 and #3 into the new patch in v2. (Daniel) * patch #2/#3: newly-added patch to test the inlining of bpf_kptr_xchg() (Eduard) v1: https://lore.kernel.org/bpf/95b8c2cd-44d5-5fe1-60b5-7e8218779566@huaweicloud.com/ [1]: https://lore.kernel.org/bpf/20231221141501.3588586-1-houtao@huaweicloud.com/ [2]: https://lore.kernel.org/bpf/fd94efb9-4a56-c982-dc2e-c66be5202cb7@huaweicloud.com/ ==================== Link: https://lore.kernel.org/r/20240105104819.3916743-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

…skb" This reverts commit b34ab35. Using skb_ensure_writable_head_tail without a call to skb_unshare causes the MACsec stack to operate on the original skb rather than a copy in the macsec_encrypt path. This causes the buffer to be exceeded in space, and leads to warnings generated by skb_put operations. Opting to revert this change since skb_copy_expand is more efficient than skb_ensure_writable_head_tail followed by a call to skb_unshare. Log: ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:2464! invalid opcode: 0000 [#1] SMP KASAN CPU: 21 PID: 61997 Comm: iperf3 Not tainted 6.7.0-rc8_for_upstream_debug_2024_01_07_17_05 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_put+0x113/0x190 Code: 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 70 3b 9d bc 00 00 00 77 0e 48 83 c4 08 4c 89 e8 5b 5d 41 5d c3 <0f> 0b 4c 8b 6c 24 20 89 74 24 04 e8 6d b7 f0 fe 8b 74 24 04 48 c7 RSP: 0018:ffff8882694e7278 EFLAGS: 00010202 RAX: 0000000000000025 RBX: 0000000000000100 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000010 RDI: ffff88816ae0bad4 RBP: ffff88816ae0ba60 R08: 0000000000000004 R09: 0000000000000004 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88811ba5abfa R13: ffff8882bdecc100 R14: ffff88816ae0ba60 R15: ffff8882bdecc0ae FS: 00007fe54df02740(0000) GS:ffff88881f080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe54d92e320 CR3: 000000010a345003 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? die+0x33/0x90 ? skb_put+0x113/0x190 ? do_trap+0x1b4/0x3b0 ? skb_put+0x113/0x190 ? do_error_trap+0xb6/0x180 ? skb_put+0x113/0x190 ? handle_invalid_op+0x2c/0x30 ? skb_put+0x113/0x190 ? exc_invalid_op+0x2b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? skb_put+0x113/0x190 ? macsec_start_xmit+0x4e9/0x21d0 macsec_start_xmit+0x830/0x21d0 ? get_txsa_from_nl+0x400/0x400 ? lock_downgrade+0x690/0x690 ? dev_queue_xmit_nit+0x78b/0xae0 dev_hard_start_xmit+0x151/0x560 __dev_queue_xmit+0x1580/0x28f0 ? check_chain_key+0x1c5/0x490 ? netdev_core_pick_tx+0x2d0/0x2d0 ? __ip_queue_xmit+0x798/0x1e00 ? lock_downgrade+0x690/0x690 ? mark_held_locks+0x9f/0xe0 ip_finish_output2+0x11e4/0x2050 ? ip_mc_finish_output+0x520/0x520 ? ip_fragment.constprop.0+0x230/0x230 ? __ip_queue_xmit+0x798/0x1e00 __ip_queue_xmit+0x798/0x1e00 ? __skb_clone+0x57a/0x760 __tcp_transmit_skb+0x169d/0x3490 ? lock_downgrade+0x690/0x690 ? __tcp_select_window+0x1320/0x1320 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x286/0x400 ? tcp_small_queue_check.isra.0+0x120/0x3d0 tcp_write_xmit+0x12b6/0x7100 ? skb_page_frag_refill+0x1e8/0x460 __tcp_push_pending_frames+0x92/0x320 tcp_sendmsg_locked+0x1ed4/0x3190 ? tcp_sendmsg_fastopen+0x650/0x650 ? tcp_sendmsg+0x1a/0x40 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x286/0x400 tcp_sendmsg+0x28/0x40 ? inet_send_prepare+0x1b0/0x1b0 __sock_sendmsg+0xc5/0x190 sock_write_iter+0x222/0x380 ? __sock_sendmsg+0x190/0x190 ? kfree+0x96/0x130 vfs_write+0x842/0xbd0 ? kernel_write+0x530/0x530 ? __fget_light+0x51/0x220 ? __fget_light+0x51/0x220 ksys_write+0x172/0x1d0 ? update_socket_protocol+0x10/0x10 ? __x64_sys_read+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x286/0x400 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0x7fe54d9018b7 Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffdbd4191d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000025 RCX: 00007fe54d9018b7 RDX: 0000000000000025 RSI: 0000000000d9859c RDI: 0000000000000004 RBP: 0000000000d9859c R08: 0000000000000004 R09: 0000000000000000 R10: 00007fe54d80afe0 R11: 0000000000000246 R12: 0000000000000004 R13: 0000000000000025 R14: 00007fe54e00ec00 R15: 0000000000d982a0 </TASK> Modules linked in: 8021q garp mrp iptable_raw bonding vfio_pci rdma_ucm ib_umad mlx5_vfio_pci mlx5_ib vfio_pci_core vfio_iommu_type1 ib_uverbs vfio mlx5_core ip_gre nf_tables ipip tunnel4 ib_ipoib ip6_gre gre ip6_tunnel tunnel6 geneve openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core zram zsmalloc fuse [last unloaded: ib_uverbs] ---[ end trace 0000000000000000 ]--- Cc: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20240118191811.50271-1-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently when packet is shrunk via bpf_xdp_adjust_tail() and memory type is set to MEM_TYPE_XSK_BUFF_POOL, null ptr dereference happens: [1136314.192256] BUG: kernel NULL pointer dereference, address: 0000000000000034 [1136314.203943] #PF: supervisor read access in kernel mode [1136314.213768] #PF: error_code(0x0000) - not-present page [1136314.223550] PGD 0 P4D 0 [1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI [1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ torvalds#257 [1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210 [1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86 [1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246 [1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX: 0000000000000000 [1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffc9003168c000 [1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09: 0000000000010000 [1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12: 0000000000000001 [1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15: 0000000000000001 [1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000) knlGS:0000000000000000 [1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4: 00000000007706f0 [1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1136314.431890] PKRU: 55555554 [1136314.439143] Call Trace: [1136314.446058] <IRQ> [1136314.452465] ? __die+0x20/0x70 [1136314.459881] ? page_fault_oops+0x15b/0x440 [1136314.468305] ? exc_page_fault+0x6a/0x150 [1136314.476491] ? asm_exc_page_fault+0x22/0x30 [1136314.484927] ? __xdp_return+0x6c/0x210 [1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0 [1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60 [1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice] [1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice] [1136314.528506] ice_napi_poll+0x467/0x670 [ice] [1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0 [1136314.546010] __napi_poll+0x29/0x1b0 [1136314.553462] net_rx_action+0x133/0x270 [1136314.561619] __do_softirq+0xbe/0x28e [1136314.569303] do_softirq+0x3f/0x60 This comes from __xdp_return() call with xdp_buff argument passed as NULL which is supposed to be consumed by xsk_buff_free() call. To address this properly, in ZC case, a node that represents the frag being removed has to be pulled out of xskb_list. Introduce appropriate xsk helpers to do such node operation and use them accordingly within bpf_xdp_adjust_tail(). Fixes: 24ea501 ("xsk: support mbuf on ZC RX") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> # For the xsk header part Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-4-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

With the introduction of the pool_rwlock (reader-writer lock), several fast paths end up taking the pool_rwlock as readers. Furthermore, stack_depot_put() unconditionally takes the pool_rwlock as a writer. Despite allowing readers to make forward-progress concurrently, reader-writer locks have inherent cache contention issues, which does not scale well on systems with large CPU counts. Rework the synchronization story of stack depot to again avoid taking any locks in the fast paths. This is done by relying on RCU-protected list traversal, and the NMI-safe subset of RCU to delay reuse of freed stack records. See code comments for more details. Along with the performance issues, this also fixes incorrect nesting of rwlock within a raw_spinlock, given that stack depot should still be usable from anywhere: | [ BUG: Invalid wait context ] | ----------------------------- | swapper/0/1 is trying to lock: | ffffffff89869be8 (pool_rwlock){..--}-{3:3}, at: stack_depot_save_flags | other info that might help us debug this: | context-{5:5} | 2 locks held by swapper/0/1: | #0: ffffffff89632440 (rcu_read_lock){....}-{1:3}, at: __queue_work | #1: ffff888100092018 (&pool->lock){-.-.}-{2:2}, at: __queue_work <-- raw_spin_lock Stack depot usage stats are similar to the previous version after a KASAN kernel boot: $ cat /sys/kernel/debug/stackdepot/stats pools: 838 allocations: 29865 frees: 6604 in_use: 23261 freelist_size: 1879 The number of pools is the same as previously. The freelist size is minimally larger, but this may also be due to variance across system boots. This shows that even though we do not eagerly wait for the next RCU grace period (such as with synchronize_rcu() or call_rcu()) after freeing a stack record - requiring depot_pop_free() to "poll" if an entry may be used - new allocations are very likely to happen in later RCU grace periods. Link: https://lkml.kernel.org/r/20240118110216.2539519-2-elver@google.com Fixes: 108be8d ("lib/stackdepot: allow users to evict stack traces") Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The stacktrace was: [ 86.305548] BUG: kernel NULL pointer dereference, address: 0000000000000092 [ 86.306815] #PF: supervisor read access in kernel mode [ 86.307717] #PF: error_code(0x0000) - not-present page [ 86.308624] PGD 0 P4D 0 [ 86.309091] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 86.309883] CPU: 2 PID: 3139 Comm: pimd Tainted: G U 6.8.0-6wind-knet #1 [ 86.311027] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014 [ 86.312728] RIP: 0010:ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985) [ 86.313399] Code: f9 1f 0f 87 85 03 00 00 48 8d 04 5b 48 8d 04 83 49 8d 44 c5 00 48 8b 40 70 48 39 c2 0f 84 d9 00 00 00 49 8b 46 58 48 83 e0 fe <80> b8 92 00 00 00 00 0f 84 55 ff ff ff 49 83 47 38 01 45 85 e4 0f [ 86.316565] RSP: 0018:ffffad21c0583ae0 EFLAGS: 00010246 [ 86.317497] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 86.318596] RDX: ffff9559cb46c000 RSI: 0000000000000000 RDI: 0000000000000000 [ 86.319627] RBP: ffffad21c0583b30 R08: 0000000000000000 R09: 0000000000000000 [ 86.320650] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 86.321672] R13: ffff9559c093a000 R14: ffff9559cc00b800 R15: ffff9559c09c1d80 [ 86.322873] FS: 00007f85db661980(0000) GS:ffff955a79d00000(0000) knlGS:0000000000000000 [ 86.324291] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 86.325314] CR2: 0000000000000092 CR3: 000000002f13a000 CR4: 0000000000350ef0 [ 86.326589] Call Trace: [ 86.327036] <TASK> [ 86.327434] ? show_regs (/build/work/knet/arch/x86/kernel/dumpstack.c:479) [ 86.328049] ? __die (/build/work/knet/arch/x86/kernel/dumpstack.c:421 /build/work/knet/arch/x86/kernel/dumpstack.c:434) [ 86.328508] ? page_fault_oops (/build/work/knet/arch/x86/mm/fault.c:707) [ 86.329107] ? do_user_addr_fault (/build/work/knet/arch/x86/mm/fault.c:1264) [ 86.329756] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.330350] ? __irq_work_queue_local (/build/work/knet/kernel/irq_work.c:111 (discriminator 1)) [ 86.331013] ? exc_page_fault (/build/work/knet/./arch/x86/include/asm/paravirt.h:693 /build/work/knet/arch/x86/mm/fault.c:1515 /build/work/knet/arch/x86/mm/fault.c:1563) [ 86.331702] ? asm_exc_page_fault (/build/work/knet/./arch/x86/include/asm/idtentry.h:570) [ 86.332468] ? ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985) [ 86.333183] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.333920] ipmr_mfc_add (/build/work/knet/./include/linux/rcupdate.h:782 /build/work/knet/net/ipv4/ipmr.c:1009 /build/work/knet/net/ipv4/ipmr.c:1273) [ 86.334583] ? __pfx_ipmr_hash_cmp (/build/work/knet/net/ipv4/ipmr.c:363) [ 86.335357] ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470) [ 86.336135] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.336854] ? ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470) [ 86.337679] do_ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:944) [ 86.338408] ? __pfx_unix_stream_read_actor (/build/work/knet/net/unix/af_unix.c:2862) [ 86.339232] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.339809] ? aa_sk_perm (/build/work/knet/security/apparmor/include/cred.h:153 /build/work/knet/security/apparmor/net.c:181) [ 86.340342] ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:1415) [ 86.340859] raw_setsockopt (/build/work/knet/net/ipv4/raw.c:836) [ 86.341408] ? security_socket_setsockopt (/build/work/knet/security/security.c:4561 (discriminator 13)) [ 86.342116] sock_common_setsockopt (/build/work/knet/net/core/sock.c:3716) [ 86.342747] do_sock_setsockopt (/build/work/knet/net/socket.c:2313) [ 86.343363] __sys_setsockopt (/build/work/knet/./include/linux/file.h:32 /build/work/knet/net/socket.c:2336) [ 86.344020] __x64_sys_setsockopt (/build/work/knet/net/socket.c:2340) [ 86.344766] do_syscall_64 (/build/work/knet/arch/x86/entry/common.c:52 /build/work/knet/arch/x86/entry/common.c:83) [ 86.345433] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.346161] ? syscall_exit_work (/build/work/knet/./include/linux/audit.h:357 /build/work/knet/kernel/entry/common.c:160) [ 86.346938] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.347657] ? syscall_exit_to_user_mode (/build/work/knet/kernel/entry/common.c:215) [ 86.348538] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.349262] ? do_syscall_64 (/build/work/knet/./arch/x86/include/asm/cpufeature.h:171 /build/work/knet/arch/x86/entry/common.c:98) [ 86.349971] entry_SYSCALL_64_after_hwframe (/build/work/knet/arch/x86/entry/entry_64.S:129) The original packet in ipmr_cache_report() may be queued and then forwarded with ip_mr_forward(). This last function has the assumption that the skb dst is set. After the below commit, the skb dst is dropped by ipv4_pktinfo_prepare(), which causes the oops. Fixes: bb74036 ("ipmr: support IP_PKTINFO on cache report IGMP msg") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240125141847.1931933-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Petr Machata says: ==================== mlxsw: Refactor reference counting code Amit Cohen writes: This set converts all reference counters defined as 'unsigned int' to refcount_t type. The reference counting of LAGs can be simplified, so first refactor the related code and then change the type of the reference counter. Patch set overview: Patches #1-#4 are preparations for LAG refactor Patch #5 refactors LAG code and change the type of reference counter Patch #6 converts the remaining reference counters in mlxsw driver ==================== Link: https://lore.kernel.org/r/cover.1706293430.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

syzbot reported a lockdep splat [1]. Blamed commit hinted about the possible lockdep violation, and code used unix_state_lock_nested() in an attempt to silence lockdep. It is not sufficient, because unix_state_lock_nested() is already used from unix_state_double_lock(). We need to use a separate subclass. This patch adds a distinct enumeration to make things more explicit. Also use swap() in unix_state_double_lock() as a clean up. v2: add a missing inline keyword to unix_state_lock_nested() [1] WARNING: possible circular locking dependency detected 6.8.0-rc1-syzkaller-00356-g8a696a29c690 #0 Not tainted syz-executor.1/2542 is trying to acquire lock: ffff88808b5df9e8 (rlock-AF_UNIX){+.+.}-{2:2}, at: skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863 but task is already holding lock: ffff88808b5dfe70 (&u->lock/1){+.+.}-{2:2}, at: unix_dgram_sendmsg+0xfc7/0x2200 net/unix/af_unix.c:2089 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&u->lock/1){+.+.}-{2:2}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 _raw_spin_lock_nested+0x31/0x40 kernel/locking/spinlock.c:378 sk_diag_dump_icons net/unix/diag.c:87 [inline] sk_diag_fill+0x6ea/0xfe0 net/unix/diag.c:157 sk_diag_dump net/unix/diag.c:196 [inline] unix_diag_dump+0x3e9/0x630 net/unix/diag.c:220 netlink_dump+0x5c1/0xcd0 net/netlink/af_netlink.c:2264 __netlink_dump_start+0x5d7/0x780 net/netlink/af_netlink.c:2370 netlink_dump_start include/linux/netlink.h:338 [inline] unix_diag_handler_dump+0x1c3/0x8f0 net/unix/diag.c:319 sock_diag_rcv_msg+0xe3/0x400 netlink_rcv_skb+0x1df/0x430 net/netlink/af_netlink.c:2543 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7e6/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa37/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_write_iter+0x39a/0x520 net/socket.c:1160 call_write_iter include/linux/fs.h:2085 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xa74/0xca0 fs/read_write.c:590 ksys_write+0x1a0/0x2c0 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b -> #0 (rlock-AF_UNIX){+.+.}-{2:2}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x1909/0x5ab0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863 unix_dgram_sendmsg+0x15d9/0x2200 net/unix/af_unix.c:2112 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x592/0x890 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmmsg+0x3b2/0x730 net/socket.c:2724 __do_sys_sendmmsg net/socket.c:2753 [inline] __se_sys_sendmmsg net/socket.c:2750 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2750 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&u->lock/1); lock(rlock-AF_UNIX); lock(&u->lock/1); lock(rlock-AF_UNIX); *** DEADLOCK *** 1 lock held by syz-executor.1/2542: #0: ffff88808b5dfe70 (&u->lock/1){+.+.}-{2:2}, at: unix_dgram_sendmsg+0xfc7/0x2200 net/unix/af_unix.c:2089 stack backtrace: CPU: 1 PID: 2542 Comm: syz-executor.1 Not tainted 6.8.0-rc1-syzkaller-00356-g8a696a29c690 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 check_noncircular+0x366/0x490 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x1909/0x5ab0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863 unix_dgram_sendmsg+0x15d9/0x2200 net/unix/af_unix.c:2112 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x592/0x890 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmmsg+0x3b2/0x730 net/socket.c:2724 __do_sys_sendmmsg net/socket.c:2753 [inline] __se_sys_sendmmsg net/socket.c:2750 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2750 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7f26d887cda9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f26d95a60c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f26d89abf80 RCX: 00007f26d887cda9 RDX: 000000000000003e RSI: 00000000200bd000 RDI: 0000000000000004 RBP: 00007f26d88c947a R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000008c0 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f26d89abf80 R15: 00007ffcfe081a68 Fixes: 2aac7a2 ("unix_diag: Pending connections IDs NLA") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240130184235.1620738-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ivan Vecera and others added 30 commits December 19, 2023 11:25

i40e: Use existing helper to find flow director VSI

43fcdba

Use existing i40e_find_vsi_by_type() to find a VSI associated with flow director. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com>

Michal Swiatkowski added 5 commits January 5, 2024 14:49

ice: netdevice ops for SF representor

29aca87

Subfunction port representor needs the basic netdevice ops to work correctly. Create them. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>

ice: basic support for VLAN in subfunctions

18df6ea

Implement add / delete vlan for subfunction type VSI. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>

mswiatko force-pushed the dev-queue branch from 087c173 to ac9a786 Compare January 25, 2024 11:41

mswiatko force-pushed the dev-queue branch from 04fbb9f to 4bd95f6 Compare February 9, 2024 07:16

mswiatko force-pushed the dev-queue branch from 4bd95f6 to 3128acb Compare March 1, 2024 11:14

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Ice subfunction in switchdev #1

Ice subfunction in switchdev #1

mswiatko commented Dec 20, 2023

Ice subfunction in switchdev #1

Are you sure you want to change the base?

Ice subfunction in switchdev #1

Conversation

mswiatko commented Dec 20, 2023