[syzkaller] KASAN: wild-memory-access Write in subflow_req_destructor #125
Comments
|
Different stack-trace but same issue (I guess ;-) ): |
|
Last seen on 01/14/2021 - Keeping open for now. |
|
Closing. |
|
It came back! HEAD is at: CONFIG-file: No reproducer... |
|
Should be fixed by a patch from @pabeni , see the ML |
|
Yes - closing. |
|
Patch ref: 2195b45: mptcp: init mptcp request socket earlier |
jenkins-tessares
pushed a commit
that referenced
this issue
Nov 18, 2021
When SUSPEND_DISCONNECTING bit is set that means Disconnect is pending but the code was evaluating if the list is empty before calling hci_conn_del which does the actual cleanup and remove the connection from the list thus the bit is never cleared causing the suspend procedure to always timeout when there are connections to be disconnected: Suspend/Resume - Success 5 (Pairing - Legacy) - waiting done Set the system into Suspend via force_suspend = mgmt-tester: Suspend/Resume - Success 5 (Pairing -.. 17:03:13.200458 = mgmt-tester: Set the system into Suspend via force_suspend 17:03:13.205812 < HCI Command: Write Scan E.. (0x03|0x001a) plen 1 #122 [hci0] 17:03:13.213561 Scan enable: No Scans (0x00) > HCI Event: Command Complete (0x0e) plen 4 #123 [hci0] 17:03:13.214710 Write Scan Enable (0x03|0x001a) ncmd 1 Status: Success (0x00) < HCI Command: Disconnect (0x01|0x0006) plen 3 #124 [hci0] 17:03:13.215830 Handle: 42 Reason: Remote Device Terminated due to Power Off (0x15) > HCI Event: Command Status (0x0f) plen 4 #125 [hci0] 17:03:13.216602 Disconnect (0x01|0x0006) ncmd 1 Status: Success (0x00) > HCI Event: Disconnect Complete (0x05) plen 4 #126 [hci0] 17:03:13.217342 Status: Success (0x00) Handle: 42 Reason: Remote Device Terminated due to Power Off (0x15) @ MGMT Event: Device Disconn.. (0x000c) plen 8 {0x0002} [hci0] 17:03:13.217688 BR/EDR Address: 00:AA:01:01:00:00 (Intel Corporation) Reason: Connection terminated by local host for suspend (0x05) @ MGMT Event: Device Disconn.. (0x000c) plen 8 {0x0001} [hci0] 17:03:13.217688 BR/EDR Address: 00:AA:01:01:00:00 (Intel Corporation) Reason: Connection terminated by local host for suspend (0x05) Suspend/Resume - Success 5 (Pairing - Legacy) - test timed out = mgmt-tester: Suspend/Resume - Success 5 (Pairing -.. 17:03:13.939317 Suspend/Resume - Success 5 (Pairing - Legacy) - teardown = mgmt-tester: Suspend/Resume - Success 5 (Pairing -.. 17:03:13.947267 [ 13.284291] Bluetooth: hci0: Timed out waiting for suspend events [ 13.287324] Bluetooth: hci0: Suspend timeout bit: 6 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
jenkins-tessares
pushed a commit
that referenced
this issue
Jan 25, 2022
…ed bind() Syzbot detected a NULL pointer dereference of nfc_llcp_sock->dev pointer (which is a 'struct nfc_dev *') with calls to llcp_sock_sendmsg() after a failed llcp_sock_bind(). The message being sent is a SOCK_DGRAM. KASAN report: BUG: KASAN: null-ptr-deref in nfc_alloc_send_skb+0x2d/0xc0 Read of size 4 at addr 00000000000005c8 by task llcp_sock_nfc_a/899 CPU: 5 PID: 899 Comm: llcp_sock_nfc_a Not tainted 5.16.0-rc6-next-20211224-00001-gc6437fbf18b0 #125 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x45/0x59 ? nfc_alloc_send_skb+0x2d/0xc0 __kasan_report.cold+0x117/0x11c ? mark_lock+0x480/0x4f0 ? nfc_alloc_send_skb+0x2d/0xc0 kasan_report+0x38/0x50 nfc_alloc_send_skb+0x2d/0xc0 nfc_llcp_send_ui_frame+0x18c/0x2a0 ? nfc_llcp_send_i_frame+0x230/0x230 ? __local_bh_enable_ip+0x86/0xe0 ? llcp_sock_connect+0x470/0x470 ? llcp_sock_connect+0x470/0x470 sock_sendmsg+0x8e/0xa0 ____sys_sendmsg+0x253/0x3f0 ... The issue was visible only with multiple simultaneous calls to bind() and sendmsg(), which resulted in most of the bind() calls to fail. The bind() was failing on checking if there is available WKS/SDP/SAP (respective bit in 'struct nfc_llcp_local' fields). When there was no available WKS/SDP/SAP, the bind returned error but the sendmsg() to such socket was able to trigger mentioned NULL pointer dereference of nfc_llcp_sock->dev. The code looks simply racy and currently it protects several paths against race with checks for (!nfc_llcp_sock->local) which is NULL-ified in error paths of bind(). The llcp_sock_sendmsg() did not have such check but called function nfc_llcp_send_ui_frame() had, although not protected with lock_sock(). Therefore the race could look like (same socket is used all the time): CPU0 CPU1 ==== ==== llcp_sock_bind() - lock_sock() - success - release_sock() - return 0 llcp_sock_sendmsg() - lock_sock() - release_sock() llcp_sock_bind(), same socket - lock_sock() - error - nfc_llcp_send_ui_frame() - if (!llcp_sock->local) - llcp_sock->local = NULL - nfc_put_device(dev) - dereference llcp_sock->dev - release_sock() - return -ERRNO The nfc_llcp_send_ui_frame() checked llcp_sock->local outside of the lock, which is racy and ineffective check. Instead, its caller llcp_sock_sendmsg(), should perform the check inside lock_sock(). Reported-and-tested-by: syzbot+7f23bcddf626e0593a39@syzkaller.appspotmail.com Fixes: b874dec ("NFC: Implement LLCP connection less Tx path") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
matttbe
pushed a commit
that referenced
this issue
Jan 26, 2024
Like commit 1cf3bfc ("bpf: Support 64-bit pointers to kfuncs") for s390x, add support for 64-bit pointers to kfuncs for LoongArch. Since the infrastructure is already implemented in BPF core, the only thing need to be done is to override bpf_jit_supports_far_kfunc_call(). Before this change, several test_verifier tests failed: # ./test_verifier | grep # | grep FAIL #119/p calls: invalid kfunc call: ptr_to_mem to struct with non-scalar FAIL #120/p calls: invalid kfunc call: ptr_to_mem to struct with nesting depth > 4 FAIL #121/p calls: invalid kfunc call: ptr_to_mem to struct with FAM FAIL #122/p calls: invalid kfunc call: reg->type != PTR_TO_CTX FAIL #123/p calls: invalid kfunc call: void * not allowed in func proto without mem size arg FAIL #124/p calls: trigger reg2btf_ids[reg->type] for reg->type > __BPF_REG_TYPE_MAX FAIL #125/p calls: invalid kfunc call: reg->off must be zero when passed to release kfunc FAIL #126/p calls: invalid kfunc call: don't match first member type when passed to release kfunc FAIL #127/p calls: invalid kfunc call: PTR_TO_BTF_ID with negative offset FAIL #128/p calls: invalid kfunc call: PTR_TO_BTF_ID with variable offset FAIL #129/p calls: invalid kfunc call: referenced arg needs refcounted PTR_TO_BTF_ID FAIL #130/p calls: valid kfunc call: referenced arg needs refcounted PTR_TO_BTF_ID FAIL #486/p map_kptr: ref: reference state created and released on xchg FAIL This is because the kfuncs in the loaded module are far away from __bpf_call_base: ffff800002009440 t bpf_kfunc_call_test_fail1 [bpf_testmod] 9000000002e128d8 T __bpf_call_base The offset relative to __bpf_call_base does NOT fit in s32, which breaks the assumption in BPF core. Enable bpf_jit_supports_far_kfunc_call() lifts this limit. Note that to reproduce the above result, tools/testing/selftests/bpf/config should be applied, and run the test with JIT enabled, unpriv BPF enabled. With this change, the test_verifier tests now all passed: # ./test_verifier ... Summary: 777 PASSED, 0 SKIPPED, 0 FAILED Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
matttbe
pushed a commit
that referenced
this issue
Sep 6, 2024
The start_kthread() and stop_thread() code was not always called with the interface_lock held. This means that the kthread variable could be unexpectedly changed causing the kthread_stop() to be called on it when it should not have been, leading to: while true; do rtla timerlat top -u -q & PID=$!; sleep 5; kill -INT $PID; sleep 0.001; kill -TERM $PID; wait $PID; done Causing the following OOPS: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc76d1b-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:hrtimer_active+0x58/0x300 Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f RSP: 0018:ffff88811d97f940 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28 RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60 R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28 FS: 0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0 Call Trace: <TASK> ? die_addr+0x40/0xa0 ? exc_general_protection+0x154/0x230 ? asm_exc_general_protection+0x26/0x30 ? hrtimer_active+0x58/0x300 ? __pfx_mutex_lock+0x10/0x10 ? __pfx_locks_remove_file+0x10/0x10 hrtimer_cancel+0x15/0x40 timerlat_fd_release+0x8e/0x1f0 ? security_file_release+0x43/0x80 __fput+0x372/0xb10 task_work_run+0x11e/0x1f0 ? _raw_spin_lock+0x85/0xe0 ? __pfx_task_work_run+0x10/0x10 ? poison_slab_object+0x109/0x170 ? do_exit+0x7a0/0x24b0 do_exit+0x7bd/0x24b0 ? __pfx_migrate_enable+0x10/0x10 ? __pfx_do_exit+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x64/0x140 ? _raw_spin_lock_irq+0x86/0xe0 do_group_exit+0xb0/0x220 get_signal+0x17ba/0x1b50 ? vfs_read+0x179/0xa40 ? timerlat_fd_read+0x30b/0x9d0 ? __pfx_get_signal+0x10/0x10 ? __pfx_timerlat_fd_read+0x10/0x10 arch_do_signal_or_restart+0x8c/0x570 ? __pfx_arch_do_signal_or_restart+0x10/0x10 ? vfs_read+0x179/0xa40 ? ksys_read+0xfe/0x1d0 ? __pfx_ksys_read+0x10/0x10 syscall_exit_to_user_mode+0xbc/0x130 do_syscall_64+0x74/0x110 ? __pfx___rseq_handle_notify_resume+0x10/0x10 ? __pfx_ksys_read+0x10/0x10 ? fpregs_restore_userregs+0xdb/0x1e0 ? fpregs_restore_userregs+0xdb/0x1e0 ? syscall_exit_to_user_mode+0x116/0x130 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7ff0070eca9c Code: Unable to access opcode bytes at 0x7ff0070eca72. RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003 RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0 R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008 </TASK> Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core ---[ end trace 0000000000000000 ]--- This is because it would mistakenly call kthread_stop() on a user space thread making it "exit" before it actually exits. Since kthreads are created based on global behavior, use a cpumask to know when kthreads are running and that they need to be shutdown before proceeding to do new work. Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/ This was debugged by using the persistent ring buffer: Link: https://lore.kernel.org/all/20240823013902.135036960@goodmis.org/ Note, locking was originally used to fix this, but that proved to cause too many deadlocks to work around: https://lore.kernel.org/linux-trace-kernel/20240823102816.5e55753b@gandalf.local.home/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Link: https://lore.kernel.org/20240904103428.08efdf4c@gandalf.local.home Fixes: e88ed22 ("tracing/timerlat: Add user-space interface") Reported-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
HEAD is at:
05cb27b ("DO-NOT-MERGE: mptcp: enabled by default") (HEAD, tag: export/20201209T060936, mptcp_net-next/export) (12 hours ago)
525593c ("DO-NOT-MERGE: mptcp: add GitHub Actions") (12 hours ago)
6aa8731 ("DO-NOT-MERGE: mptcp: use kmalloc on kasan build") (12 hours ago)
2227bfd ("mptcp: let MPTCP create max size skbs") (12 hours ago)
908c632 ("mptcp: pm: simplify select_local_address()") (12 hours ago)
a771b76 ("mptcp: parse and act on incoming FASTCLOSE option") (12 hours ago)
7dbc6b7 ("tcp: parse mptcp options contained in reset packets") (12 hours ago)
4598a67 ("mptcp: hold mptcp socket before calling tcp_done") (12 hours ago)
3630500 ("mptcp: use MPTCPOPT_HMAC_LEN macro") (12 hours ago)
905c00c ("selftests: mptcp: add the flush addrs testcase") (12 hours ago)
2d0de9b ("mptcp: remove address when netlink flushes addrs") (12 hours ago)
389cb8d ("mptcp: use the variable sk instead of open-coding") (12 hours ago)
62ad6da ("mptcp: rename add_addr_signal and mptcp_add_addr_status") (12 hours ago)
56607a9 ("mptcp: drop rm_addr_signal flag") (12 hours ago)
f561498 ("mptcp: print out port and ahmac when receiving ADD_ADDR") (12 hours ago)
faec918 ("mptcp: add port parameter for mptcp_pm_announce_addr") (12 hours ago)
1bab32f ("mptcp: send out dedicated packet for ADD_ADDR using port") (12 hours ago)
a7429bb ("mptcp: add the outgoing ADD_ADDR port support") (12 hours ago)
a8787a8 ("mptcp: use adding up size to get ADD_ADDR length") (12 hours ago)
1690597 ("mptcp: add port support for ADD_ADDR suboption writing") (12 hours ago)
4021cd8 ("mptcp: unify ADD_ADDR and ADD_ADDR6 suboptions writing") (12 hours ago)
0b86309 ("mptcp: unify ADD_ADDR and echo suboptions writing") (12 hours ago)
c855f89 ("bpf:selftests: add bpf_mptcp_sock() verifier tests") (12 hours ago)
0eaea54 ("bpf:selftests: add MPTCP test base") (12 hours ago)
eed59ab ("bpf: add 'bpf_mptcp_sock' structure and helper") (12 hours ago)
6dd1da9 ("mptcp: attach subflow socket to parent cgroup") (12 hours ago)
58a4d0c ("bpf: expose is_mptcp flag to bpf_tcp_sock") (12 hours ago)
d188dfe ("mptcp: be careful on subflows shutdown") (12 hours ago)
9910201 ("mptcp: plug subflow context memory leak") (12 hours ago)
ae1cd5e ("mptcp: link MPC subflow into msk only after accept") (12 hours ago)
afae3cc ("net: atheros: simplify the return expression of atl2_phy_setup_autoneg_adv()") (mptcp_net-next/net-next) (18 hours ago)
No reproducer yet.
CONFIG-file:
CONFIG.txt
The text was updated successfully, but these errors were encountered: