Skip to content
/ bgp-configuration Public

This module describes the basic tasks to configure a basic Border Gateway Protocol (BGP) network. BGP is an interdomain routing protocol that is designed

0 stars 0 forks Branches Tags Activity
Star
Notifications You must be signed in to change notification settings

mushfiqur-rahman/bgp-configuration

BranchesTags

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

3 Commits
README.MD
README.MD
 
 
bgp-1.png
bgp-1.png
 
 
bgp.pkt
bgp.pkt
 
 
bgp.png
bgp.png
 
 

Repository files navigation

Border Gateway Protocol (BGP) Configuration

  • ⚙️ Tools: Cisco Packet Tracer

Project View

First Router Configuration

Router>enable
Router#
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface FastEthernet0/0
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
ip address 10.10.10.1 255.0.0.0
Router(config-if)#ip address 10.10.10.1 255.0.0.0
Router(config-if)#
Router(config-if)#exit
Router(config)#interface Serial2/0
Router(config-if)#no shutdown
Router(config-if)#ip address 40.40.40.1 255.0.0.0
Router(config-if)#ip address 40.40.40.1 255.0.0.0
Router(config-if)#
%LINK-5-CHANGED: Interface Serial2/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#
Router(config-if)#
Router(config-if)#
Router(config-if)#en
Router(config-if)#exit
Router(config)#router bgp 1
Router(config-router)#net
Router(config-router)#network 10.0.0.0
Router(config-router)#network 40.0.0.0
Router(config-router)#nei
Router(config-router)#neighbor 40.40.40.2 re
Router(config-router)#neighbor 40.40.40.2 remote-as 2
Router(config-router)#exit
Router(config)#

Second Router Configuration

Press RETURN to get started!



Router>enable
Router#
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface FastEthernet0/0
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
ip address 20.20.20.1 255.0.0.0
Router(config-if)#ip address 20.20.20.1 255.0.0.0
Router(config-if)#
Router(config-if)#exit
Router(config)#interface Serial2/0
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface Serial2/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up
ip address 40.40.40.2 255.0.0.0
Router(config-if)#ip address 40.40.40.2 255.0.0.0
Router(config-if)#
Router(config-if)#exit
Router(config)#interface Serial3/0
Router(config-if)#no shutdown
Router(config-if)#ip address 50.50.50.1 255.0.0.0
Router(config-if)#ip address 50.50.50.1 255.0.0.0
Router(config-if)#
%LINK-5-CHANGED: Interface Serial3/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up



Router con0 is now available


Press RETURN to get started.



Press RETURN to get started!



Router>ena
Router>enable
Router#config t
Router#config terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#rout
Router(config)#router bg
Router(config)#router bgp 2
Router(config-router)#net
Router(config-router)#network 20.0.0.0
Router(config-router)#network 40.0.0.0
Router(config-router)#nei
Router(config-router)#net
Router(config-router)#network 50.0.0.0
Router(config-router)#nei
Router(config-router)#neighbor 40.40.40.1 re
Router(config-router)#neighbor 40.40.40.1 remote-as 1
Router(config-router)#%BGP-5-ADJCHANGE: neighbor 40.40.40.1 Up
neighbor 50.50.50.2 remote-as 3
Router(config-router)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console

Router#

Third Router Configuration

Router>enable
Router#
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface FastEthernet0/0
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
ip address 30.30.30.1 255.0.0.0
Router(config-if)#ip address 30.30.30.1 255.0.0.0
Router(config-if)#
Router(config-if)#exit
Router(config)#interface Serial2/0
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface Serial2/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up
ip address 50.50.50.2 255.0.0.0
Router(config-if)#ip address 50.50.50.2 255.0.0.0
Router(config-if)#


Router con0 is now available






Press RETURN to get started.



Press RETURN to get started!



Router>
Router>ena
Router>enable
Router#config t
Router#config terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#rout
Router(config)#router bgp
% Incomplete command.
Router(config)#router bgp 3
Router(config-router)#net
Router(config-router)#network 30.0.0.0
Router(config-router)#network 50.0.0.0
Router(config-router)#nei
Router(config-router)#neighbor 50.50.50.1 rem
Router(config-router)#neighbor 50.50.50.1 remote-as 2
Router(config-router)#%BGP-5-ADJCHANGE: neighbor 50.50.50.1 Up
exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console

About

This module describes the basic tasks to configure a basic Border Gateway Protocol (BGP) network. BGP is an interdomain routing protocol that is designed

Topics

cisco bgp-monitoring-protocol cisco-packet-tracer bgp-configuration bgp-router

Resources

Readme
Activity

Stars

0 stars

Watchers

1 watching

Forks

0 forks
Report repository

Releases

No releases published

Packages

No packages published