Random Access To Archived Resources (Ratarmount)

Ratarmount collects all file positions inside a TAR so that it can easily jump to and read from any file without extracting it. It, then, mounts the TAR using fusepy for read access just like archivemount. In contrast to libarchive, on which archivemount is based, random access and true seeking is supported. And in contrast to tarindexer, which also collects file positions for random access, ratarmount offers easy access via FUSE and support for compressed TARs.

Capabilities:

Random Access: Care was taken to achieve fast random access inside compressed streams for bzip2, gzip, xz, and zstd and inside TAR files by building indices containing seek points.
Highly Parallelized: By default, all cores are used for parallelized algorithms like for the gzip, bzip2, and xz decoders. This can yield huge speedups on most modern processors but requires more main memory. It can be controlled or completely turned off using the -P <cores> option.
Recursive Mounting: Ratarmount will also mount TARs inside TARs inside TARs, ... recursively into folders of the same name, which is useful for the 1.31TB ImageNet data set.
Mount Compressed Files: You may also mount files with one of the supported compression schemes. Even if these files do not contain a TAR, you can leverage ratarmount's true seeking capabilities when opening the mounted uncompressed view of such a file.
Read-Only Bind Mounting: Folders may be mounted read-only to other folders for usecases like merging a backup TAR with newer versions of those files residing in a normal folder.
Union Mounting: Multiple TARs, compressed files, and bind mounted folders can be mounted under the same mountpoint.
Write Overlay: A folder can be specified as write overlay. All changes below the mountpoint will be redirected to this folder and deletions are tracked so that all changes can be applied back to the archive.
Remote Files and Folders: A remote archive or whole folder structure can be mounted similar to tools like sshfs thanks to the filesystem_spec project. These can be specified with URIs as explained in the section "Remote Files". Supported remote protocols include: FTP, HTTP, HTTPS, SFTP, SSH, Git, Github, S3, Samba v2 and v3, Dropbox, ... Many of these are very experimental and may be slow. Please open a feature request if further backends are desired.

A complete list of supported formats can be found here.

Examples

ratarmount archive.tar.gz to mount a compressed archive at a folder called archive and make its contents browsable.
ratarmount --recursive archive.tar mountpoint to mount the archive and recursively all its contained archives under a folder called mountpoint.
ratarmount folder mountpoint to bind-mount a folder.
ratarmount folder1 folder2 mountpoint to bind-mount a merged view of two (or more) folders under mountpoint.
ratarmount folder archive.zip folder to mount a merged view of a folder on top of archive contents.
ratarmount -o modules=subdir,subdir=squashfs-root archive.squashfs mountpoint to mount an archive subfolder squashfs-root under mountpoint.
ratarmount http://server.org:80/archive.rar folder folder Mount an archive that is accessible via HTTP range requests.
ratarmount ssh://hostname:22/relativefolder/ mountpoint Mount a folder hierarchy via SSH.
ratarmount ssh://hostname:22//tmp/tmp-abcdef/ mountpoint
ratarmount github://mxmlnkn:ratarmount@v0.15.2/tests/ mountpoint Mount a github repo as if it was checked out at the given tag or SHA or branch.
AWS_ACCESS_KEY_ID=01234567890123456789 AWS_SECRET_ACCESS_KEY=0123456789012345678901234567890123456789 ratarmount s3://127.0.0.1/bucket/single-file.tar mounted Mount an archive inside an S3 bucket reachable via a custom endpoint with the given credentials. Bogus credentials may be necessary for unsecured endpoints.

Installation

You can install ratarmount either by simply downloading the AppImage or via pip. The latter might require installing additional dependencies.

pip install ratarmount

If you want all features, some of which may possibly result in installation errors on some systems, install with:

pip install ratarmount[full]

Installation via AppImage

The AppImage files are attached under "Assets" on the releases page. They require no installation and can be simply executed like a portable executable. If you want to install it, you can simply copy it into any of the folders listed in your PATH.

appImageName=ratarmount-0.15.0-x86_64.AppImage
wget 'https://github.com/mxmlnkn/ratarmount/releases/download/v0.15.0/$appImageName'
chmod u+x -- "$appImageName"
./"$appImageName" --help  # Simple test run
sudo cp -- "$appImageName" /usr/local/bin/ratarmount  # Example installation

Installation via Package Manager

Arch Linux

Arch Linux's AUR offers ratarmount as stable and development package. Use an AUR helper, like yay or paru, to install one of them:

# stable version
paru -Syu ratarmount
# development version
paru -Syu ratarmount-git

Conda

conda install -c conda-forge ratarmount

System Dependencies for PIP Installation (Rarely Necessary)

Python 3.6+, preferably pip 19.0+, FUSE, and sqlite3 are required. These should be preinstalled on most systems.

On Debian-like systems like Ubuntu, you can install/update all dependencies using:

sudo apt install python3 python3-pip fuse sqlite3 unar libarchive13 lzop gcc liblzo2-dev

On macOS, you have to install macFUSE and other optional dependencies with:

brew install macfuse unar libarchive lrzip lzop lzo

If you are installing on a system for which there exists no manylinux wheel, then you'll have to install further dependencies that are required to build some of the Python packages that ratarmount depends on from source:

sudo apt install \
    python3 python3-pip fuse \
    build-essential software-properties-common \
    zlib1g-dev libzstd-dev liblzma-dev cffi libarchive-dev liblzo2-dev gcc

PIP Package Installation

Then, you can simply install ratarmount from PyPI:

pip install ratarmount

Or, if you want to test the latest version:

python3 -m pip install --user --force-reinstall \
    'git+https://github.com/mxmlnkn/ratarmount.git@develop#egginfo=ratarmountcore&subdirectory=core' \
    'git+https://github.com/mxmlnkn/ratarmount.git@develop#egginfo=ratarmount'

If there are troubles with the compression backend dependencies, you can try the pip --no-deps argument. Ratarmount will work without the compression backends. The hard requirements are fusepy and for Python versions older than 3.7.0 dataclasses.

Supported Formats

TAR compressions supported for random access

BZip2 as provided by indexed_bzip2 as a backend, which is a refactored and extended version of bzcat from toybox. See also the reverse engineered specification.
Gzip and Zlib as provided by rapidgzip or indexed_gzip by Paul McCarthy. See also RFC1952 and RFC1950.
Xz as provided by python-xz by Rogdham or lzmaffi by Tomer Chachamu. See also The .xz File Format.
Zstd as provided by indexed_zstd by Marco Martinelli. See also Zstandard Compression Format.

Other supported archive formats

Rar as provided by rarfile by Marko Kreen. See also the RAR 5.0 archive format.
SquashFS, AppImage, Snap as provided by PySquashfsImage by Matteo Mattei. There seems to be no authoritative, open format specification, only this nicely-done reverse-engineered description, I assume based on the source code. Note that Snaps and Appimages are both SquashFS images, with an executable prepended for AppImages.
Zip as provided by zipfile, which is distributed with Python itself. See also the ZIP File Format Specification.
FAT12/FAT16/FAT32/VFAT as provided by PyFatFS by Nathan-J. Hirschauer. See also Microsoft's FAT32 File System Specification.
Many Others as provided by libarchive via python-libarchive-c.
- Formats with tests: 7z, ar, cab, compress, cpio, iso, lrzip, lzma, lz4, lzip, lzo, warc, xar.
- Untested formats that might work or not: deb, grzip, rpm, uuencoding.
- Beware that libarchive has no performant random access to files and to file contents. In order to seek or open a file, in general, it needs to be assumed that the archive has to be parsed from the beginning. If you have a performance-critical use case for a format only supported via libarchive, then please open a feature request for a faster customized archive format implementation. The hope would be to add suitable stream compressors such as "short"-distance LZ-based compressions to rapidgzip.

Benchmarks

Not shown in the benchmarks, but ratarmount can mount files with preexisting index sidecar files in under a second making it vastly more efficient compared to archivemount for every subsequent mount. Also, archivemount has no progress indicator making it very unlikely the user will wait hours for the mounting to finish. Fuse-archive, an iteration on archivemount, has the --asyncprogress option to give a progress indicator using the timestamp of a dummy file. Note that fuse-archive daemonizes instantly but the mount point will not be usable for a long time and everything trying to use it will hang until then when not using --asyncprogress!
Getting file contents of a mounted archive is generally vastly faster than archivemount and fuse-archive and does not increase with the archive size or file count resulting in the largest observed speedups to be around 5 orders of magnitude!
Memory consumption of ratarmount is mostly less than archivemount and mostly does not grow with the archive size. Not shown in the plots, but the memory usage will be much smaller when not specifying -P 0, i.e., when not parallelizing. The gzip backend grows linearly with the archive size because the data for seeking is thousands of times larger than the simple two 64-bit offsets required for bzip2. The memory usage of the zstd backend only seems humongous because it uses mmap to open. The memory used by mmap is not even counted as used memory when showing the memory usage with free or htop.
For empty files, mounting with ratarmount and archivemount does not seem be bounded by decompression nor I/O bandwidths but instead by the algorithm for creating the internal file index. This algorithm scales linearly for ratarmount and fuse-archive but seems to scale worse than even quadratically for archives containing more than 1M files when using archivemount. Ratarmount 0.10.0 improves upon earlier versions by batching SQLite insertions.
Mounting bzip2 and xz archives has actually become faster than archivemount and fuse-archive with ratarmount -P 0 on most modern processors because it actually uses more than one core for decoding those compressions. indexed_bzip2 supports block parallel decoding since version 1.2.0.
Gzip compressed TAR files are two times slower than archivemount during first time mounting. It is not totally clear to me why that is because streaming the file contents after the archive being mounted is comparably fast, see the next benchmarks below. In order to have superior speeds for both of these, I am experimenting with a parallelized gzip decompressor like the prototype pugz offers for non-binary files only.
For the other cases, mounting times become roughly the same compared to archivemount for archives with 2M files in an approximately 100GB archive.
Getting a lot of metadata for archive contents as demonstrated by calling find on the mount point is an order of magnitude slower compared to archivemount. Because the C-based fuse-archive is even slower than ratarmount, the difference is very likely that archivemount uses the low-level FUSE interface while ratarmount and fuse-archive use the high-level FUSE interface.

Reading files from the archive with archivemount are scaling quadratically instead of linearly. This is because archivemount starts reading from the beginning of the archive for each requested I/O block. The block size depends on the program or operating system and should be in the order of 4 kiB. Meaning, the scaling is O( (sizeOfFileToBeCopiedFromArchive / readChunkSize)^2 ). Both, ratarmount and fuse-archive avoid this behavior. Because of this quadratic scaling, the average bandwidth with archivemount seems like it decreases with the file size.
Reading bz2 and xz are both an order of magnitude faster, as tested on my 12/24-core Ryzen 3900X, thanks to parallelization.
Memory is bounded in these tests for all programs but ratarmount is a lot more lax with memory because it uses a Python stack and because it needs to hold caches for a constant amount of blocks for parallel decoding of bzip2 and xz files. The zstd backend in ratarmount looks unbounded because it uses mmap, whose memory usage will automatically stop and be freed if the memory limit has been reached.
The peak for the xz decoder reading speeds happens because some blocks will be cached when loading the index, which is not included in the benchmark for technical reasons. The value for the 1 GiB file size is more realistic.

Further benchmarks can be viewed here.

The Problem

You downloaded a large TAR file from the internet, for example the 1.31TB large ImageNet, and you now want to use it but lack the space, time, or a file system fast enough to extract all the 14.2 million image files.

Existing Partial Solutions

Partial Solutions

Archivemount

Archivemount seems to have large performance issues for too many files and large archive for both mounting and file access in version 0.8.7. A more in-depth comparison benchmark can be found here.

Mounting the 6.5GB ImageNet Large-Scale Visual Recognition Challenge 2012 validation data set, and then testing the speed with: time cat mounted/ILSVRC2012_val_00049975.JPEG | wc -c takes 250ms for archivemount and 2ms for ratarmount.
Trying to mount the 150GB ILSVRC object localization data set containing 2 million images was given up upon after 2 hours. Ratarmount takes ~15min to create a ~150MB index and <1ms for opening an already created index (SQLite database) and mounting the TAR. In contrast, archivemount will take the same amount of time even for subsequent mounts.
Does not support recursive mounting. Although, you could write a script to stack archivemount on top of archivemount for all contained TAR files.

Tarindexer

Tarindex is a command line to tool written in Python which can create index files and then use the index file to extract single files from the tar fast. However, it also has some caveats which ratarmount tries to solve:

It only works with single files, meaning it would be necessary to loop over the extract-call. But this would require loading the possibly quite large tar index file into memory each time. For example for ImageNet, the resulting index file is hundreds of MB large. Also, extracting directories will be a hassle.
It's difficult to integrate tarindexer into other production environments. Ratarmount instead uses FUSE to mount the TAR as a folder readable by any other programs requiring access to the contained data.
Can't handle TARs recursively. In order to extract files inside a TAR which itself is inside a TAR, the packed TAR first needs to be extracted.

TAR Browser

I didn't find out about TAR Browser before I finished the ratarmount script. That's also one of it's cons:

Hard to find. I don't seem to be the only one who has trouble finding it as it has one star on Github after 7 years compared to 45 stars for tarindexer after roughly the same amount of time.
Hassle to set up. Needs compilation and I gave up when I was instructed to set up a MySQL database for it to use. Confusingly, the setup instructions are not on its Github but here.
Doesn't seem to support recursive TAR mounting. I didn't test it because of the MysQL dependency but the code does not seem to have logic for recursive mounting.
Xz compression also is only block or frame based, i.e., only works faster with files created by pixz or pxz.

Pros:

supports bz2- and xz-compressed TAR archives

The Solution

Ratarmount creates an index file with file names, ownership, permission flags, and offset information. This sidecar is stored at the TAR file's location or in ~/.ratarmount/. Ratarmount can load that index file in under a second if it exists and then offers FUSE mount integration for easy access to the files inside the archive.

Here is a more recent test for version 0.2.0 with the new default SQLite backend:

TAR size: 124GB
Contains TARs: yes
Files in TAR: 1000
Files in TAR (including recursively in contained TARs): 1.26 million
Index creation (first mounting): 15m 39s
Index size: 146MB
Index loading (subsequent mounting): 0.000s
Reading a 64kB file: ~4ms
Running 'find mountPoint -type f | wc -l' (1.26M stat calls): 1m 50s

The reading time for a small file simply verifies the random access by using file seek to be working. The difference between the first read and subsequent reads is not because of ratarmount but because of operating system and file system caches.

Older test with 1.31 TB Imagenet (Fall 2011 release)

The test with the first version of ratarmount (50e8dbb), which used the, as of now removed, pickle backend for serializing the metadata index, for the ImageNet data set:

TAR size: 1.31TB
Contains TARs: yes
Files in TAR: ~26 000
Files in TAR (including recursively in contained TARs): 14.2 million
Index creation (first mounting): 4 hours
Index size: 1GB
Index loading (subsequent mounting): 80s
Reading a 40kB file: 100ms (first time) and 4ms (subsequent times)

Index loading is relatively slow with 80s because of the pickle backend, which now has been replaced with SQLite and should take less than a second now.

Usage

Command Line Options

See ratarmount --help or here.

Metadata Index Cache

In order to reduce the mounting time, the created index for random access to files inside the tar will be saved to one of these locations. These locations are checked in order and the first, which works sufficiently, will be used. This is the default location order:

.index.sqlite
~/.ratarmount/<path to tar: '/' -> '_'>.index.sqlite E.g., ~/.ratarmount/_media_cdrom_programm.tar.index.sqlite

This list of fallback folders can be overwritten using the --index-folders option. Furthermore, an explicitly named index file may be specified using the --index-file option. If --index-file is used, then the fallback folders, including the default ones, will be ignored!

Bind Mounting

The mount sources can be TARs and/or folders. Because of that, ratarmount can also be used to bind mount folders read-only to another path similar to bindfs and mount --bind. So, for:

ratarmount folder mountpoint

all files in folder will now be visible in mountpoint.

Union Mounting

If multiple mount sources are specified, the sources on the right side will be added to or update existing files from a mount source left of it. For example:

ratarmount folder1 folder2 mountpoint

will make both, the files from folder1 and folder2, visible in mountpoint. If a file exists in both multiple source, then the file from the rightmost mount source will be used, which in the above example would be folder2.

If you want to update / overwrite a folder with the contents of a given TAR, you can specify the folder both as a mount source and as the mount point:

ratarmount folder file.tar folder

The FUSE option -o nonempty will be automatically added if such a usage is detected. If you instead want to update a TAR with a folder, you only have to swap the two mount sources:

ratarmount file.tar folder folder

File versions

If a file exists multiple times in a TAR or in multiple mount sources, then the hidden versions can be accessed through special .versions folders. For example, consider:

ratarmount folder updated.tar mountpoint

and the file foo exists both in the folder and as two different versions in updated.tar. Then, you can list all three versions using:

ls -la mountpoint/foo.versions/
    dr-xr-xr-x 2 user group     0 Apr 25 21:41 .
    dr-x------ 2 user group 10240 Apr 26 15:59 ..
    -r-x------ 2 user group   123 Apr 25 21:41 1
    -r-x------ 2 user group   256 Apr 25 21:53 2
    -r-x------ 2 user group  1024 Apr 25 22:13 3

In this example, the oldest version has only 123 bytes while the newest and by default shown version has 1024 bytes. So, in order to look at the oldest version, you can simply do:

cat mountpoint/foo.versions/1

Note that these version numbers are the same as when used with tar's --occurrence=N option.

Prefix Removal

Use ratarmount -o modules=subdir,subdir=<prefix> to remove path prefixes using the FUSE subdir module. Because it is a standard FUSE feature, the -o ... argument should also work for other FUSE applications.

When mounting an archive created with absolute paths, e.g., tar -P cf /var/log/apt/history.log, you would see the whole var/log/apt hierarchy under the mount point. To avoid that, specified prefixes can be stripped from paths so that the mount target directory directly contains history.log. Use ratarmount -o modules=subdir,subdir=/var/log/apt/ to do so. The specified path to the folder inside the TAR will be mounted to root, i.e., the mount point.

Compressed non-TAR files

If you want a compressed file not containing a TAR, e.g., foo.bz2, then you can also use ratarmount for that. The uncompressed view will then be mounted to <mountpoint>/foo and you will be able to leverage ratarmount's seeking capabilities when opening that file.

Xz and Zst Files

In contrast to bzip2 and gzip compressed files, true seeking on xz and zst files is only possible at block or frame boundaries. This wouldn't be noteworthy, if both standard compressors for xz and zstd were not by default creating unsuited files. Even though both file formats do support multiple frames and xz even contains a frame table at the end for easy seeking, both compressors write only a single frame and/or block out, making this feature unusable. In order to generate truly seekable compressed files, you'll have to use pixz for xz files. For zstd compressed, you can try with t2sz. The standard zstd tool does not support setting smaller block sizes yet although an issue does exist. Alternatively, you can simply split the original file into parts, compress those parts, and then concatenate those parts together to get a suitable multiframe zst file. Here is a bash function, which can be used for that:

Bash script: createMultiFrameZstd

createMultiFrameZstd()
(
    # Detect being piped into
    if [ -t 0 ]; then
        file=$1
        frameSize=$2
        if [[ ! -f "$file" ]]; then echo "Could not find file '$file'." 1>&2; return 1; fi
        fileSize=$( stat -c %s -- "$file" )
    else
        if [ -t 1 ]; then echo 'You should pipe the output to somewhere!' 1>&2; return 1; fi
        echo 'Will compress from stdin...' 1>&2
        frameSize=$1
    fi
    if [[ ! $frameSize =~ ^[0-9]+$ ]]; then
        echo "Frame size '$frameSize' is not a valid number." 1>&2
        return 1
    fi

    # Create a temporary file. I avoid simply piping to zstd
    # because it wouldn't store the uncompressed size.
    if [[ -d /dev/shm ]]; then frameFile=$( mktemp --tmpdir=/dev/shm ); fi
    if [[ -z $frameFile ]]; then frameFile=$( mktemp ); fi
    if [[ -z $frameFile ]]; then
        echo "Could not create a temporary file for the frames." 1>&2
        return 1
    fi

    if [ -t 0 ]; then
        true > "$file.zst"
        for (( offset = 0; offset < fileSize; offset += frameSize )); do
            dd if="$file" of="$frameFile" bs=$(( 1024*1024 )) \
               iflag=skip_bytes,count_bytes skip="$offset" count="$frameSize" 2>/dev/null
            zstd -c -q -- "$frameFile" >> "$file.zst"
        done
    else
        while true; do
            dd of="$frameFile" bs=$(( 1024*1024 )) \
               iflag=count_bytes count="$frameSize" 2>/dev/null
            # pipe is finished when reading it yields no further data
            if [[ ! -s "$frameFile" ]]; then break; fi
            zstd -c -q -- "$frameFile"
        done
    fi

    'rm' -f -- "$frameFile"
)

In order to compress a file named foo into a multiframe zst file called foo.zst, which contains frames sized 4MiB of uncompressed ata, you would call it like this:

createMultiFrameZstd foo  $(( 4*1024*1024 ))

It also works when being piped to. This can be useful for recompressing files to avoid having to decompress them first to disk.

lbzip2 -cd well-compressed-file.bz2 | createMultiFrameZstd $(( 4*1024*1024 )) > recompressed.zst

Remote Files

The fsspec API backend adds support for mounting many remote archive or folders. Please refer to the linked respective backend documentation to see the full configuration options, especially for specifying credentials. Some often-used configuration environment variables are copied here for easier viewing.

Symbol	Description
`[something]`	Optional "something"
`(one\|two)`	Either "one" or "two"

git://[path-to-repo:][ref@]path/to/file
Uses the current path if no repository path is specified. Backend: ratarmountcore via pygit2
github://org:repo@[sha]/path-to/file-or-folder
Example: github://mxmlnkn:ratarmount@v0.15.2/tests/single-file.tar
Backend: fsspec
http[s]://hostname[:port]/path-to/archive.rar
Backend: fsspec via aiohttp
(ipfs|ipns)://content-identifier
Example: ipfs daemon & sleep 2 && ratarmount -f ipfs://QmYwAPJzv5CZsnA625s3Xf2nemtYgPpHdWEz79ojWnPbdG mounted
Backend: fsspec/ipfsspec
Tries to connect to running local ipfs daemon instance by default, which needs to be started beforehand. ~~Alternatively, a (public) gateway can be specified with the environment variable IPFS_GATEWAY, e.g., https://127.0.0.1:8080.~~ Specifying a public gateway does not (yet) work because of this issue.
s3://[endpoint-hostname[:port]]/bucket[/single-file.tar[?versionId=some_version_id]]
Backend: fsspec/s3fs via boto3
The URL will default to AWS according to the Boto3 library defaults when no endpoint is specified. Boto3 will check, among others, these environment variables, for credentials:
- AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY, AWS_SESSION_TOKEN, AWS_DEFAULT_REGION
fsspec/s3fs furthermore supports this environment variable:
- FSSPEC_S3_ENDPOINT_URL, e.g., http://127.0.0.1:8053
ftp://[user[:password]@]hostname[:port]/path-to/archive.rar
Backend: fsspec via ftplib
(ssh|sftp)://[user[:password]@]hostname[:port]/path-to/archive.rar
Backend: fsspec/sshfs via asyncssh
The usual configuration via ~/.ssh/config is supported.
smb://[workgroup;][user:password@]server[:port]/share/folder/file.tar
webdav://[user:password@]host[:port][/path]
Backend: webdav4 via httpx
Environment variables: WEBDAV_USER, WEBDAV_PASSWORD
dropbox://path
Backend: fsspec/dropboxdrivefs via dropbox-sdk-python
Follow these instructions to create an app. Check the files.metadata.read and files.content.read permissions and press "submit" and after that create the (long) OAuth 2 token and store it in the environment variable DROPBOX_TOKEN. Ignore the (short) app key and secret. This creates a corresponding app folder that can be filled with data.

Many other fsspec-based projects may also work when installed.

This functionality of ratarmount offers a hopefully more-tested and out-of-the-box experience over the experimental fsspec.fuse implementation. And, it also works in conjunction with the other features of ratarmount such as union mounting and recursive mounting.

Index files specified with --index-file can also be compressed and/or be an fsspec (chained) URL, e.g., https://host.org/file.tar.index.sqlite.gz. In such a case, the index file will be downloaded and/or extracted into the default temporary folder. If the default temporary folder has insufficient disk space, it can be changed by setting the RATARMOUNT_INDEX_TMPDIR environment variable.

Writable Mounting

The --write-overlay <folder> option can be used to create a writable mount point. The original archive will not be modified.

File creations will create these files in the specified overlay folder.
File deletions and renames will be registered in a database that also resides in the overlay folder.
File modifications will copy the file from the archive into the overlay folder before applying the modification.

This overlay folder can be stored alongside the archive or it can be deleted after unmounting the archive. This is useful when building the executable from a source tarball without extracting. After installation, the intermediary build files residing in the overlay folder can be safely removed.

If it is desired to apply the modifications to the original archive, then the --commit-overlay can be prepended to the original ratarmount call.

Here is an example for applying modifications to a writable mount and then committing those modifications back to the archive:

Mount it with a write overlay and add new files. The original archive is not modified.

ratarmount --write-overlay example-overlay example.tar example-mount-point
echo "Hello World" > example-mount-point/new-file.txt

Unmount. Changes persist solely in the overlay folder.
```
fusermount -u example-mount-point
```

Commit changes to the original archive.

ratarmount --commit-overlay --write-overlay example-overlay example.tar example-mount-point

Output:

To commit the overlay folder to the archive, these commands have to be executed:

    tar --delete --null --verbatim-files-from --files-from='/tmp/tmp_ajfo8wf/deletions.lst' \
        --file 'example.tar' 2>&1 |
       sed '/^tar: Exiting with failure/d; /^tar.*Not found in archive/d'
    tar --append -C 'zlib-wiki-overlay' --null --verbatim-files-from --files-from='/tmp/tmp_ajfo8wf/append.lst' --file 'example.tar'

Committing is an experimental feature!
Please confirm by entering "commit". Any other input will cancel.
> 
Committed successfully. You can now remove the overlay folder at example-overlay.

Verify the modifications to the original archive.

tar -tvlf example.tar

Output:

-rw-rw-r-- user/user 652817 2022-08-08 10:44 example.txt
-rw-rw-r-- user/user     12 2023-02-16 09:49 new-file.txt

Remove the obsole write overlay folder.
```
rm -r example-overlay
```

As a Library

Ratarmount can also be used as a library. Using ratarmountcore, files inside archives can be accessed directly from Python code without requiring FUSE. For a more detailed description, see the ratarmountcore readme here.

Fsspec Integration

To use all fsspec features, either install via pip install ratarmount[fsspec] or pip install ratarmount[fsspec]. It should also suffice to simply pip install fsspec if ratarmountcore is already installed. The optional fsspec integration is threefold:

Files can be specified on the command line via URLs pointing to remotes as explained in this section.
A ratarmountcore.MountSource wrapping fsspec AbstractFileSystem implementation has been added. A specialized SQLiteIndexedTarFileSystem as a more performant and direct replacement for fsspec.implementations.TarFileSystem has also been added.
```
from ratarmountcore.SQLiteIndexedTarFsspec import SQLiteIndexedTarFileSystem as ratarfs
fs = ratarfs("tests/single-file.tar")
print("Files in root:", fs.ls("/", detail=False))
print("Contents of /bar:", fs.cat("/bar"))
```
During installation ratarmountcore registers the ratar:// protocol with fsspec via an entrypoint group. This enables usages with fsspec.open. The fsspec URL chaining feature must be used in order for this to be useful. Example for opening the file bar, which is contained inside the file tests/single-file.tar.gz with ratarmountcore:
```
import fsspec
with fsspec.open("ratar://bar::file://tests/single-file.tar.gz") as file:
    print("Contents of file bar:", file.read())
```
This also works with pandas:
```
import fsspec
import pandas as pd
with fsspec.open("ratar://bar::file://tests/single-file.tar.gz", compression=None) as file:
    print("Contents of file bar:", file.read())
```
The compression=None argument is currently necessary because of this Pandas bug.

File Joining

Files with sequentially numbered extensions can be mounted as a joined file. If it is an archive, then the joined archive file will be mounted. Only one of the files, preferably the first one, should be specified. For example:

base64 /dev/urandom | head -c $(( 1024 * 1024 )) > 1MiB.dat
tar -cjf- 1MiB.dat | split -d --bytes=320K - file.tar.gz.
ls -la
# 320K  file.tar.gz.00
# 320K  file.tar.gz.01
# 138K  file.tar.gz.02
ratarmount file.tar.gz.00 mounted
ls -la mounted
# 1.0M  1MiB.dat

Name		Name	Last commit message	Last commit date
Latest commit History 822 Commits
.github/workflows		.github/workflows
AppImage		AppImage
benchmarks		benchmarks
core		core
presentation		presentation
tests		tests
.gitattributes		.gitattributes
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
README.md		README.md
pyproject.toml		pyproject.toml
ratarmount.py		ratarmount.py
ratarmount.svg		ratarmount.svg
setup.py		setup.py

License

mxmlnkn/ratarmount

Folders and files

Latest commit

History

Repository files navigation