❗ This repository is no longer maintained and may contain vulnerable code. If you wish to revive it, please request a security review.

RadiUID

An application to extract User-to-IP mappings from RADIUS accounting data and send them to Palo Alto firewalls for use by the User-ID function.

---

VERSION

The version of RadiUID documented here is: v2.5.0

---

TABLE OF CONTENTS

1. What is RadiUID?
2. How it Works
3. Screenshots
4. Requirements
5. Tested Environments
6. Docker Install Instructions
7. OS Install Instructions
8. Command Interface
9. Timeout Tuning
10. The Munge Engine
11. 1.1.0 TO 2.0.0 Updates
12. 2.0.0 TO 2.0.1 Updates
13. 2.0.1 TO 2.1.0 Updates
14. 2.1.0 TO 2.2.0 Updates
15. 2.2.0 TO 2.2.1 Updates
16. 2.2.1 TO 2.3.0 Updates
17. 2.3.0 TO 2.3.1 Updates
18. 2.3.1 TO 2.3.2 Updates
19. 2.3.2 TO 2.4.0 Updates
20. 2.4.0 TO 2.4.1 Updates
21. 2.4.1 TO 2.4.2 Updates
22. 2.4.2 TO 2.4.3 Updates
23. 2.4.3 TO 2.5.0 Updates
24. Upgrade Processes
25. Docker Files
26. Contributing

---

WHAT IS RADIUID

User-based firewall filtering is a novel and attractive concept which can often be difficult to implement due to the requirement by firewalls to map IP addresses to users. One common method of getting user-to-IP mapping information for your firewall is to install a log-reading agent onto an Active Directory domain controller which can look over transaction logs and send the proper information to the firewall, but this assumes user endpoints interact and authenticate directly with the domain controllers, or that you have Active Directory at all!

RadiUID is a Linux-based application built to take everyday RADIUS accounting information generated by RADIUS authenticators like wireless systems, firewalls, etc (which contains username and IP info) and send that ephemeral IP and username mapping info to a Palo Alto firewall to be used by the User-ID system for user or group-based access-list filtering, or intelligent reporting.

---

HOW IT WORKS

RadiUID uses FreeRADIUS as a backend service to listen on RADIUS accounting ports (typically TCP\UDP 1813) and write recieved accounting information to accounting logs.

RadiUID then parses these logs, pulls down the User and IP mapping information and pushes those mappings to the Palo Alto firewall using the published RESTful XML API.

RadiUID runs as a system service on Linux and is very easy to configure and use. All configuration and interaction with RadiUID is via command line on the Linux BASH shell. Once the installer completes, RadiUID can be invoked from the command shell by typing radiuid followed by the desired command. Hit the [TAB] key for command options or hit [ENTER] for the list of options!

---

SCREENSHOTS

The main list of CLI command options

Output from the show log command

Output from the show config command

Output from the show config set command

Pushing a mapping using the push command and checking the current mappings using the show mappings command

Test your munge rule-set using the request munge-test command

---

REQUIREMENTS

OS: Any modern Debian, RHEL distro (CentOS 6 or 7, Ubuntu 14 or 16...), or Docker container host

Interpreter: Python 2.7.X (Also works on Python 2.6.6 and up)

PAN-OS Version: 6.X, 7.X, and 8.X have been tested

---

TESTED ENVIRONMENTS

RadiUID has been written and tested in a few environments to date as it was purpose-built for a specific environment, but it should be very adaptable as it uses standardized RADIUS accounting to source user information and the published API to push that info to Palo Alto firewalls.

RadiUID has currently been tested with the following Operating Systems, RADIUS servers, and authenticators

Operating Systems: CentOS 7, CentOS 6, Ubuntu 16 Server, Ubuntu 14 Server, Docker 1.10.3

Identity Systems: JumpCloud RADIUS service, Windows 2012 NPS Server (with Active Directory)

Authenticators: Meraki Wireless Access Points, Cisco Wireless (Controller-based), Ruckus Zonedirector

---

DOCKER INSTALL INSTRUCTIONS

Downloading and running RadiUID on a Docker host is the fastest and easiest way to get it up and running. There are two versions of the RadiUID image maintained on Docker Hub: an image with SSH, and an image without SSH. The image with SSH has the SSH server installed and pre-configured with a login username and password. All you have to do is change the password. The Dockerfile build scripts which were used to build the images are available in the Docker Files section in case you want to perform the build yourself.

1. From the Docker host, download and run the image in interactive mode
   1. To run the image with SSH: docker run -it -p 1813:1813/udp -p 1813:1813/tcp -p 222:22/tcp --name radiuid -t packetsar/radiuid-ssh:latest
   2. To run the image without SSH: docker run -it -p 1813:1813/udp -p 1813:1813/tcp --name RADIUID -t packetsar/radiuid:latest
2. If you ran the image with SSH: The default SSH username and password is root\radiuid. Run the command passwd root to change the SSH password.
   1. NOTE: The command above to run the container with SSH publishes the SSH service on TCP port 222. You will need to connect to that port with your SSH client to get access to the container.
3. Run the command radiuid show config set to see the default configuration.
4. Run the radiuid clear target all command to delete the firewall target configurations, then use the radiuid set target [parameters] command to configure the application with your Palo Alto target firewall paramaters.
5. Run the radiuid set client [parameters] command to configure FreeRADIUS to accept RADIUS accounting data from your RADIUS authenticators.
6. Once configuration is complete, run the radiuid service all restart to restart the services so the new configuration takes effect.
7. Take a look at your logs using the radiuid show log command to see what the application is doing.
8. To exit your interactive session with the Docker container, hold down CTRL and hit P then Q.

---

OS INSTALL INSTRUCTIONS

The install of RadiUID is very quick and straightforward using the built-in installer. NOTE: You need to be logged in as root or have sudo privileges on the system to install RadiUID

1. Install OS with appropriate IP and OS settings and update to latest patches (recommended)
   • Check out the CentOS Minimal Server - Post-Install Setup and the Ubuntu Server - Post Install Setup for help with some of the post-OS-install configuration steps.
2. Install the Git client (unless you already have the RadiUID files): sudo yum install git -y or sudo apt install git -y
3. Clone the RadiUID repo to any location on the box: git clone https://github.com/PackeTsar/radiuid.git
4. Change to the directory where the RadiUID main code file (radiuid.py) and config file (radiuid.conf) are stored: cd radiuid
   • (OPTIONAL) Change to the development branch (perform this step only if you are prepared for a version which is under active development and may have broken features): git checkout devX.X.X
5. Run the RadiUID program in install mode to perform the installation: sudo python radiuid.py install
   • NOTE: Make sure that you have the .conf file in the same directory as the .py directory for the initial install
6. Follow the on-screen prompts to install FreeRADIUS and the RadiUID application
   • The installer should let you know if everything installed correctly and services are running, but in the next section are the CLI commands you can run to check up on it.

---

COMMAND INTERFACE

The RadiUID system is meant to run in the background as a system service: constantly checking for new RADIUS accounting data and pushing User-ID mapping information to the firewall, but it also has an easy to use command interface. This command interface is meant to be used for regular maintenance, troubleshooting, and operation of the system.

Below is the CLI guide for the RadiUID service.

You can see this guide by typing 'python radiuid.py' (before installation) or 'radiuid' (after installation) and hitting ENTER.

-------------------------------------------------------------------------------------------------------------------------------
                     ARGUMENTS                    |                                  DESCRIPTIONS
-------------------------------------------------------------------------------------------------------------------------------

 - run                                            |  Run the RadiUID main program in shell mode begin pushing User-ID information
-------------------------------------------------------------------------------------------------------------------------------

 - install                                        |  Run RadiUID Install/Maintenance Utility
-------------------------------------------------------------------------------------------------------------------------------

 - show log                                       |  Show the RadiUID log file
 - show acct-logs                                 |  Show the log files currently in the FreeRADIUS accounting directory
 - show run (xml | set)                           |  Show the RadiUID configuration in XML format (default) or as set commands
 - show config (xml | set)                        |  Show the RadiUID configuration in XML format (default) or as set commands
 - show clients (file | table)                    |  Show the FreeRADIUS clients and config file
 - show status                                    |  Show the RadiUID and FreeRADIUS service statuses
 - show mappings (<target> | all | consistency)   |  Show the current IP-to-User mappings of one or all targets or check consistency
-------------------------------------------------------------------------------------------------------------------------------

 - set logfile                                    |  Set the RadiUID logfile path
 - set radiuslogpath <directory path>             |  Set the path used to find FreeRADIUS accounting log files
 - set acctlogcopypath <directory path>           |  Set the path where RadiUID should copy acct log files before deletion
 - set maxloglines <number-of-lines>              |  Set the max number of lines allowed in the log ('0' turns circular logging off)
 - set userdomain (none | <domain name>)          |  Set the domain name prepended to User-ID mappings
 - set timeout                                    |  Set the timeout (in minutes) for User-ID mappings sent to the firewall targets
 - set looptime                                   |  Set the waiting loop time (in seconds) to pause between checks of the RADIUS logs
 - set tlsversion (1.0 | 1.1 | 1.2)               |  Set the version of TLS used for XML API communication with the firewall targets
 - set radiusstopaction (clear | ignore | push)   |  Set the action taken by RadiUID when RADIUS stop messages are received
 - set client (ipv4|ipv6) <ip-block> <secret>     |  Set configuration elements for RADIUS clients to send accounting data FreeRADIUS
 - set munge <rule>.<step> [parameters]           |  Set munge (string processing rules) for User-IDs
 - set target <hostname>:<vsys-id> [parameters]   |  Set configuration elements for existing or new firewall targets
-------------------------------------------------------------------------------------------------------------------------------

 - push (<hostname>:<vsys-id> | all) [parameters] |  Manually push a User-ID mapping to one or all firewall targets
-------------------------------------------------------------------------------------------------------------------------------

 - tail log (<# of lines>)                        |  Watch the RadiUID log file in real time
-------------------------------------------------------------------------------------------------------------------------------

 - clear log                                      |  Delete the content in the log file
 - clear acct-logs                                |  Delete the log files currently in the FreeRADIUS accounting directory
 - clear client (<ip-block> | all)                |  Delete one or all RADIUS client IP blocks in FreeRADIUS config file
 - clear munge (<rule> | all) (<step> | all)      |  Delete one or all munge rules in the config file
 - clear target (<hostname>:<vsys-id> | all)      |  Delete one or all firewall targets in the config file
 - clear mappings [parameters]                    |  Remove one or all IP-to-User mappings from one or all firewalls
-------------------------------------------------------------------------------------------------------------------------------

 - edit config                                    |  Edit the RadiUID config file
 - edit clients                                   |  Edit RADIUS client config file for FreeRADIUS
-------------------------------------------------------------------------------------------------------------------------------

 - service [parameters]                           |  Control the RadiUID and FreeRADIUS system services
-------------------------------------------------------------------------------------------------------------------------------

 - request [parameters]                           |  Make system-level changes for RadiUID service
-------------------------------------------------------------------------------------------------------------------------------

 - version                                        |  Show the current version of RadiUID and FreeRADIUS
-------------------------------------------------------------------------------------------------------------------------------

---

TIMEOUT TUNING

RadiUID pushes ephemeral User-ID information to the firewall whenever new RADIUS accounting information is recieved and by default sets a timeout of 60 minutes. If this accounting information comes from a wireless system (where most devices re-authenticate regularly) then you may be able to tune down that timeout to make the mapping information expire more quickly. If the RADIUS authenticator is something like a VPN concentrator (where re-authentication doesn't typically happen), then you may want to turn up the timeout period. Either way, you should expect to have to play with the timeout settings to make sure your firewalls are not prematurely expiring User-ID data from their mapping tables.

---

THE MUNGE ENGINE

The Munge Engine is a rule-based string processor which is used in RadiUID to filter and process User-IDs based on rules you configure. The munge feature was introduced in version 2.2.0.

• A sample munge configuration can be seen below. This configuration will instruct the Munge Engine to find any User-ID which contains a double-backslash and reconstruct it with only one backslash. Then it will find any User-ID which contains the name 'vendor' and discard it (prevent it from being pushed to the Palo Alto). This example uses both of the Munge Engine complex actions (set-variable, and assemble), but only uses one of the simple actions (discard), it does not use the accept simple action.

  NOTE: The double-backslash in the 101.0 match statement is represented by a quad-backslash because BASH recognizes the backslash character as an escape. You will always need to use a double-backslash to represent a single-backslash. You also should always wrap your regular expressions in quotes when entering them.

radiuid set munge 101.0 match "\\\\" partial
radiuid set munge 101.10 set-variable domain from-match "^[a-zA-Z0-9]+"
radiuid set munge 101.20 set-variable user from-match "[a-zA-Z0-9]+$"
radiuid set munge 101.30 set-variable slash from-string "\\"
radiuid set munge 101.40 assemble domain slash user
radiuid set munge 102.0 match "vendor" partial
radiuid set munge 102.10 discard

• Munge rules are broken down into rules and steps and are configured/ordered in a dot-notation as <rule number>.<step number>. The rules and steps can be numbered as desired with one exception (X.0) which is described below. The rules and steps are processed in order by their numbers, so when configuring them, you may want to leave gaps in the assigned numbers for insertion of other rules or steps later between the existing ones.
• The only requirement for rule numbering is that step '0' in each rule (X.0) must be a match statement, as it is used to determine whether or not to process the rule on the User-ID. All rules must begin with a X.0 match statement followed by either an any keyword (which will match all inputs) or by a regular expression.
  • If the X.0 match statement uses a regular expression, it will require a complete or partial keyword at the end which is used as the return criterion. The complete keyword requires that the regular expression match and return the entire input User-ID. The partial keyword activates the rule upon a partial return of the input User-ID from the regular expression match operation.
• Other than the required X.0 match action, Munge has four actions which are broken down into two groups:
  • Simple Actions: accept, discard
  • Complex Actions: set-variable, assemble
• The various actions are explained below
  • The accept action halts all rule and step processing and passes the input (User-ID) back out of the engine without any further filtering or changes.
  • The discard action halts all rule and step processing and discards the current input; not allowing it to pass out of the engine at all.
  • The set-variable action instructs the engine to save a string (either part of the input/User-ID, or a manually configured static string) in memory for use later by the assemble action. The variable's name is configured right after the set-variable term and it can be any alphanumerical word. The string's source-type can be either a regular expression match (using the from-match term) or it can be a statically configured string (using the from-string term).
    • NOTE: Set variables are usable across rules. They do not have to be used by the assemble action within the same rule. If you reuse the same variable name in different rule, note that the variable value set in an earlier rule will be overwritten by the later rule.
  • The assemble action is used to assemble previously set variables into one string. A list of strings should be provided in order after the assemble verb seperated by spaces.
• The request munge-test command can be used to test a Munge rule-set on a provided input. You can also provide the debug term at the end of the command to see a walk-through of the steps taken by the Munge Engine and how it processed the configured rules to modify/filter the input provided in the command.
• The radiuid push command has the new keyword bypass-munge available at the end to either let the Munge Engine process the input User-ID (by default) or bypass the Munge Engine and push only the input User-ID.

---

---

Updates

---

UPDATES IN V1.1.0 --> V2.0.0

ADDED FEATURES:

• The RadiUID config file has been changed to a simpler XML format. Config file management no longer depends on the ConfigParser module.

• All configuration settings (including the RADIUS client configuration for FreeRADIUS) are configurable using set commands. Just type radiuid set and hit [ENTER] to see the options or type show config set and hit [ENTER] to see the current configuration as a series of set commands.

• Multiple target firewalls are now supported; mappings can be pushed to multiple firewalls using different credentials.

• Multi-vsys functionality has been added so a configured firewall target includes parameters for the target vsys. If you want to control multiple vsys on the same firewall, you will need to add multiple targets.

• Improved HTTP error handling to keep application from crashing.

• Added CLI auto-complete functionality to allow you to use the [TAB] key to automatically complete commands or see the available options.

• Circular logging was added to maintain the size of the log file. The number of lines allowed in the log file is controlled by the maxloglines parameter which is configurable using the set maxloglines command.

• The show mappings was command added to pull and view mappings directly from one or all firewalls. The consistency parameter can also be used to check the consistency of mappings across all configured firewalls.

• The push command was added to allow you to manually push a User-to-IP mapping to one or all the firewalls. NOTE: The user and IP address can be anything you want, they do not have to be legitimate users or working IP addresses

• The show config set command was added to display the current configuration as a series of set commands which can be copied and pasted to configure the application.

• The show clients, set client, and clear client commands were added to allow you to more easily control the RADIUS clients configured in the FreeRADIUS clients.conf file. Now it can all be administered using RadiUID commands. The show config set output even includes the current RADIUS clients as set client commands.

---

UPDATES IN V2.0.0 --> V2.0.1

BUG FIXES:

• ISSUE #13: The RadiUID 'merge_dicts' method was throwing a KeyError exception and quitting the loop (service) when a FreeRADIUS log was scraped which didn't contain the three required fields (usernameterm, ipaddressterm, and the delineatorterm). An error handler has been added to detect the KeyError, dump the dictionary data to the log, and continue in the loop.

  • This issue was reproduced on v2.0.0 code by removing the line in the FreeRADIUS log containing the usernameterm text and running the loop (radiuid run).
  • It is highly recommended to update to v2.0.1 or later to fix this bug as it affects the stability of the RadiUID RADIUS log capturing functionality.

• ISSUE #14: The default configured delineatorterm was documented as non-functional for RADIUS accounting messages from a Ruckus wireless system by Dan Hume on his blog at http://www.dhume.co.uk. He had to change the default delineatorterm to "Accounting-Session-ID" to make the log parsing work properly.

  • This bug has been fixed by adding functionality for RadiUID to recognize the paragraph separations between FreeRADIUS log entries within the same file and use those paragraph separations as the delineator. To enable this functionality, you must upgrade to v2.0.1 and use the [PARAGRAPH] keyword as the delineatorterm value (which is now the default value in the config file).

---

UPDATES IN V2.0.1 --> V2.1.0

ADDED FEATURES:

• Multi-OS support: Previously only CentOS 7 was supported for installation due to dependencies on specific file paths and OS commands for interaction with the OS. Now RadiUID should fully work on any modern Debian or RHEL distro. It has been QA tested on CentOS 7.2, CentOS 6.8, Ubuntu 16.04, and Ubuntu 14.04.

• radiuid show acct-logs and radiuid clear acct-logs commands now added to help with controlling the FreeRADIUS logs in the accounting directory.

• The new request top-level command now gives access to some of the more advanced system-level functions in RadiUID. These commands can now be used to fully install RadiUID as an alternative to the Install/Maintenance Utility

  • request auto-complete runs the script to install and activate the BASH Auto-Completion feature
  • request freeradius-install installs the FreeRADIUS app using the proper package manager
  • request xml-update downloads and installs an update to the xml.etree.ElementTree Python module. This upgrades ElementTree to 1.3.0 which is the minimum version required for RadiUID to run properly. This is only required when running Python 2.6.X.
  • request reinstall keep-config performs a reinstall of the RadiUID binary, BASH Auto-Completion feature, RadiUID service, and restarts the service, but leaves the current config file alone to preserve the config during an upgrade. This command is now the preferred way to perform an update of an existing installation of RadiUID.
  • request reinstall replace-configperforms all of the tasks listed above with the exception that it also replaces the existing configuration (if one exists) with the default config. This command can be used to do a quick net-new install of RadiUID without using the classic installer.

BUG FIXES:

• ISSUE #16: Newer builds of urllib2 in Python 2.7 started generating an error when the SSL certificate was invalid. Some logic has been added to detect when to use the proper SSL handling

• ISSUE #17: The RadiUID XML assembler was hard set to allow up to 100 UIDs in a single API call before splitting into multiple calls which was overwhelming to the Palo Alto. That setting has been moved down to 50 UIDs per call and the setting maxuidspercall has been moved to the internal settings area near the top of the radiuid.py file.

  • This fix was reproduced and verified fixed by having RadiUID eat a FreeRADIUS Accounting log file with 2000 UIDs and push them into a test firewall. 50 UIDs per API call seems to work even with long usernames (50 characters).

---

UPDATES IN V2.1.0 --> V2.2.0

ADDED FEATURES:

• The Munge Engine: RadiUID now includes a built-in rule-based string processor. The Munge Engine allows users to create a list of rules which will be used by RadiUID to filter, dissect, and reassemble User-IDs as they pass through the RadiUID service. More details on this feature can be found in the Munge Engine section.

BUG FIXES:

• ISSUE #19: The userdomain configuration element now allows the use of the value none to specify that no domain should be prepended to User-IDs.

---

UPDATES IN V2.2.0 --> V2.2.1

BUG FIXES:

• ISSUE #20: Added the no-confirm switch to the end of the commands request reinstall keep-config, request reinstall replace-config, request freeradius-install commands.

---

UPDATES IN V2.2.1 --> V2.3.0

ADDED FEATURES:

• ISSUE #21: RadiUID is now available as a Docker image on Docker Hub. Small code changes were made to allow RadiUID to recognize when it is being run in a container and to be able to stop, start, and restart services while the container is running.

---

UPDATES IN V2.3.0 --> V2.3.1

BUG FIXES:

• ISSUE #22: Repaired broken RadiUID service control when in a container. Now you can start, stop, and restart FreeRADIUS and RadiUID services from within the container without having to restart the container from the host.

---

UPDATES IN V2.3.1 --> V2.3.2

BUG FIXES:

• ISSUE #23: Was unable to specify complex usernames (with periods, forward-slashes, domain-names, etc) in the radiuid push <pan> <username> <ip> command due to strict username input checking. Removed input checking on username to allow any input in command.

---

UPDATES IN V2.3.2 --> V2.4.0

ADDED FEATURES:

• Configurable TLS Protocol (#27): The TLS protocol used to communicate with the target firewalls can now be set to use TLS1.0 (previously the default), TLS1.1, or TLS1.2. This feature is configured with the radiuid set tlsversion command.

• Configurable RADIUS Stop Action (#26): RadiUID can now be configured to take different actions when a RADIUS stop log is found. It can continue to push the UID mapping (previous default action), it can ignore the UID mapping and discard it from the push, or it can take action on it and actively clear it from the firewall mapping table. This feature is configured with the radiuid set radiusstopaction command.

• Configurable Loop Time (#25): RadiUID would previously wait 10 seconds before each check of the RADIUS logs. This wait time is now configurable using the radiuid set looptime command.

BUG FIXES:

• ISSUE #28: Any configuration command which would generate a 1-line XML configuration change (example: radiuid set maxloglines 10) would not properly display the changed XML configuration item due to a bug in the formatxml library (used by show_config_item). This should now work properly.

DEFAULT BEHAVIOR CHANGES: With the exposure of the tlsversion and radiusstopaction elements to configuration, best-practices have also been set for those values. The legacy behaviors are also supported and configurable if desired.

• Version 2.4.0 changes the default HTTPS TLS version from TLS1.0 to TLS1.2. This behavior can be changed back to pre-2.4.0 behavior using the command: radiuid set tlsversion 1.0.

• Version 2.4.0 changes the default RADIUS stop action (radiusstopaction) behavior from push to clear as a best practice. This more closely matches the commonly desired effect of synchronizing the PAN UID table with RADIUS logs. This behavior can be changed back to pre-2.4.0 behavior using the command: radiuid set radiusstopaction push.

---

UPDATES IN V2.4.0 --> V2.4.1

BUG FIXES:

• ISSUE #29: Munge rule processing results within push_uids were being assembled back into modipanduserdict incorrectly formatted excluding the status field in the dictionary. The behavior seen was an exception thrown when RadiUID was run with munge rules configured and accounting logs available. This issue was reported by Marcus Cooke on the PacketPushers RadiUID blog post.

---

UPDATES IN V2.4.1 --> V2.4.2

BUG FIXES:

• ISSUE #30: Munge discard overridden by accept step in following rule. This was due to a bug in the munge engine which did not properly break rule processing when a discard is detected. This issue was reported by Marcus Cooke on the PacketPushers RadiUID blog post.

---

UPDATES IN V2.4.2 --> V2.4.3

BUG FIXES:

• ISSUE #31: RADIUS can [on occasion] report a RADIUS status type other than the standard start, stop, and update. A bug in RadiUID would cause the service to crash when this was seen due to an issue in the log reader. This issue was reported by Adam on the RadiUID Github issues list.

---

UPDATES IN V2.4.3 --> V2.5.0

ADDED FEATURES:

• ISSUE #36: Added the ability to configure a custom port on a target using the radiuid set target <target_id> port <port_number> syntax.

• ISSUE #37: Added a feature to copy files from the FreeRADIUS log folder before deleting them. Can be configured with the set acctlogcopypath <directory path> syntax. Files with same name are appended instead of copied.

BUG FIXES:

• ISSUE #32: Apostrophes in a username will cause a crash of the RadiUID process due to the method of string processing. The processing method has been changed to repair this issue.

• OTHER: FreeRADIUS not being installed when RadiUID gets installed with wizard and is reset before completion. Fixed now.

• OTHER: Removed PAN-OS version awareness since there are no differences between major versions in API calls.

---

UPGRADE PROCESSES

Upgrading from v2.X to v2.5.0:

1. Perform a radiuid show config set command and save the set commands displayed in a safe place (just in case)
2. Download the code from the GitHub repo by using git clone https://github.com/PackeTsar/radiuid.git
   • If the "radiuid" folder already exists, you can use git to update the clone cd radiuid/; git pull
3. Move to the radiuid folder created by git using the cd radiuid/ command
4. Change to the latest branch using the command git checkout v2.5.0
5. Perform a quick reinstall/update of RadiUID using the command python radiuid.py request reinstall keep-config
6. Type in CONFIRM and hit ENTER to confirm you want to perform the reinstall
7. Once the installer exits, you should run radiuid show config set and see your configuration from before.
8. Check that you are running the new version by issuing radiuid version
9. Perform a radiuid service all restart command to restart RadiUID to use the new app version
   • NOTE: The RadiUID service will continue running in the background throughout the install/upgrade process. It is not until you restart/stop the service that the new version and configuration will take effect.
10. You may also want to log out of the shell and back in to activate any new auto-complete functions.

Upgrading from v1.X to v2.X.X:

1. Change the name of your config file (/etc/radiuid/radiuid.conf) by issuing the command mv /etc/radiuid/radiuid.conf /etc/radiuid/radiuid.conf.backup
2. Grab the contents to have them handy during the install of the new version more /etc/radiuid/radiuid.conf.backup
3. Download the v2.X.X code from the GitHub repo by using git clone https://github.com/PackeTsar/radiuid.git
   • If the "radiuid" folder already exists, you may want to use git to update the clone cd radiuid/; git pull
4. Move to the radiuid folder created by git using the cd radiuid/ command
5. Perform a full install of RadiUID using the command python radiuid.py install
6. Follow the prompts and fill out the appropriate information using the information from the old configuration file
7. Once the installer exits, you should run radiuid show config set and see your configuration.
8. Perform a radiuid service all restart command to restart RadiUID to use the new app version

---

DOCKERFILES

These are the dockerfile script files used to build the SSH and non-SSH Docker images hosted on Docker Hub. You can use these on a Docker host to build your own RadiUID image if you don't want to download the pre-made one from Docker Hub.

With SSH

FROM centos:latest
MAINTAINER John W Kerns "jkerns@packetsar.com"

### Install and configure SSH Server for SSH access to container ###
RUN yum install -y openssh openssh-server openssh-clients sudo passwd
RUN sshd-keygen
RUN sed -i "s/UsePAM.*/UsePAM yes/g" /etc/ssh/sshd_config
RUN sed -i "s/#UsePrivilegeSeparation.*/UsePrivilegeSeparation no/g" /etc/ssh/sshd_config
RUN useradd admin -G wheel -s /bin/bash -m
RUN echo 'root:radiuid' | chpasswd
RUN echo '%wheel ALL=(ALL) ALL' >> /etc/sudoers

### Download and install RadiUID from latest release ###
RUN curl -sL https://codeload.github.com/PackeTsar/radiuid/tar.gz/2.5.0 | tar xz
RUN cd radiuid-2.5.0;python radiuid.py request reinstall replace-config no-confirm
RUN cd radiuid-2.5.0;python radiuid.py request freeradius-install no-confirm

### Expose ports and provide run commands ###
EXPOSE 1813/udp
EXPOSE 1813/tcp
EXPOSE 22/tcp
CMD radiusd & radiuid run >> /etc/radiuid/STDOUT & /usr/sbin/sshd >> /etc/radiuid/SSH-STDOUT & /bin/bash

Without SSH

FROM centos:latest
MAINTAINER John W Kerns "jkerns@packetsar.com"

### Download and install RadiUID from latest release ###
RUN curl -sL https://codeload.github.com/PackeTsar/radiuid/tar.gz/2.5.0 | tar xz
RUN cd radiuid-2.5.0;python radiuid.py request reinstall replace-config no-confirm
RUN cd radiuid-2.5.0;python radiuid.py request freeradius-install no-confirm

### Expose ports and provide run commands ###
EXPOSE 1813/udp
EXPOSE 1813/tcp
CMD radiusd & radiuid run >> /etc/radiuid/STDOUT & /bin/bash

Docker Build

To build your own Docker image: follow the instructions below

1. After installing Docker (yum install docker or an equivalent) and starting it up (systemctl start docker or an equivalent), create a new file called "Dockerfile": vi Dockerfile
2. Paste in the text from one of the above scripts: Hit i to get into insert mode, and paste in the text, then hit ESC to leave insert mode, then type in :wq and hit ENTER to save and exit
3. Build the Docker image using the command docker build -t mydockerradiuidimage . Docker will run through the script and install RadiUID and FreeRADIUS.
4. You can now run the docker images command and see your new image
5. To run the image, issue the command docker run -it -p 1813:1813/udp -p 1813:1813/tcp -p 222:22/tcp --name radiuid -t mydockerradiuidimage
6. You will enter into interactive mode in the container where you can run radiuid commands. After you are done in the container, hit CTRL + P + Q to exit interactive mode but leave the container running.
7. If you used the "With SSH" Dockerfile script, then you should be able to SSH to the Docker host's IP on port 222 to directly access the container.
8. If you want to save this image to Docker Hub, use the command docker push mydockerradiuidimage.

---

CONTRIBUTING

If you would like to help out by contributing code or reporting issues, please do!

Visit the GitHub page (https://github.com/PackeTsar/radiuid) and either report an issue or fork the project, commit some changes, and submit a pull request.