update #1
Merged
update #1
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This driver already uses ioremap_wc() on the same range so when write-combining is available that will be used instead. Cc: Hyong-Youb Kim <hykim@myri.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: netdev@vger.kernel.org Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a GETATTR to the end of ALLOCATE and DEALLOCATE operations so we can set the updated inode size and change attribute directly. DEALLOCATE will still need to release pagecache pages, so nfs42_proc_deallocate() now calls truncate_pagecache_range() before contacting the server. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
At the very least, we should not be taking the i_mutex until after checking if the server even supports ALLOCATE or DEALLOCATE, allowing v4.0 or v4.1 to exit without potentially waiting on a lock. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Chuck pointed out a problem that crept in with commit 6ffa30d (nfs: don't call blocking operations while !TASK_RUNNING). Linux counts tasks in uninterruptible sleep against the load average, so this caused the system's load average to be pinned at at least 1 when there was a NFSv4.1+ mount active. Not a huge problem, but it's probably worth fixing before we get too many complaints about it. This patch converts the code back to use TASK_INTERRUPTIBLE sleep, simply has it flush any signals on each loop iteration. In practice no one should really be signalling this thread at all, so I think this is reasonably safe. With this change, there's also no need to game the hung task watchdog so we can also convert the schedule_timeout call back to a normal schedule. Cc: <stable@vger.kernel.org> Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> Fixes: commit 6ffa30d (“nfs: don't call blocking . . .”) Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
v2: gracefully handle the case where some dentry pointers end up NULL
and be more dilligent about zeroing out dentry pointers
We currently have a problem that SELinux policy is being enforced when
creating debugfs files. If a debugfs file is created as a side effect of
doing some syscall, then that creation can fail if the SELinux policy
for that process prevents it.
This seems wrong. We don't do that for files under /proc, for instance,
so Bruce has proposed a patch to fix that.
While discussing that patch however, Greg K.H. stated:
"No kernel code should care / fail if a debugfs function fails, so
please fix up the sunrpc code first."
This patch converts all of the sunrpc debugfs setup code to be void
return functins, and the callers to not look for errors from those
functions.
This should allow rpc_clnt and rpc_xprt creation to work, even if the
kernel fails to create debugfs files for some reason.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2ef47eb (NFS: Fix use of nfs_attr_use_mounted_on_fileid()) was a good start to fixing a circular directory structure warning for NFS v4 "junctioned" mountpoints. Unfortunately, further testing continued to generate this error. My server is configured like this: anna@nfsd ~ % df Filesystem Size Used Avail Use% Mounted on /dev/vda1 9.1G 2.0G 6.5G 24% / /dev/vdc1 1014M 33M 982M 4% /exports /dev/vdc2 1014M 33M 982M 4% /exports/vol1 /dev/vdc3 1014M 33M 982M 4% /exports/vol1/vol2 anna@nfsd ~ % cat /etc/exports /exports/ *(rw,async,no_subtree_check,no_root_squash) /exports/vol1/ *(rw,async,no_subtree_check,no_root_squash) /exports/vol1/vol2 *(rw,async,no_subtree_check,no_root_squash) I've been running chown across the entire mountpoint twice in a row to hit this problem. The first run succeeds, but the second one fails with the circular directory warning along with: anna@client ~ % dmesg [Apr 3 14:28] NFS: server 192.168.100.204 error: fileid changed fsid 0:39: expected fileid 0x100080, got 0x80 WHere 0x80 is the mountpoint's fileid and 0x100080 is the mounted-on fileid. This patch fixes the issue by requesting an updated mounted-on fileid from the server during nfs_update_inode(), and then checking that the fileid stored in the nfs_inode matches either the fileid or mounted-on fileid returned by the server. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
For direct read that has IO size larger than rsize, we'll split it into several READ requests and nfs_direct_good_bytes() would count completed bytes incorrectly by eating last zero count reply. Fix it by handling mirror and non-mirror cases differently such that we only count mirrored writes differently. This fixes 5fadeb4("nfs: count DIO good bytes correctly with mirroring"). Reported-by: Jean Spector <jean@primarydata.com> Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
For flexfiles driver, we might choose to read from mirror index other than 0 while mirror_count is always 1 for read. Reported-by: Jean Spector <jean@primarydata.com> Cc: <stable@vger.kernel.org> # v3.19+ Cc: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
d4b18c3 (pnfs: remove GETDEVICELIST implementation) removed the GETDEVICELIST operation from the NFS client, but left a "hole" in the nfs4_procedures array. This caused /proc/self/mountstats to report an operation named "51" where GETDEVICELIST used to be. This patch adds a stub to fix mountstats. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Fixes: d4b18c3 (pnfs: remove GETDEVICELIST implementation) Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The idmapper is completely internal to the NFS v4 module, so this macro will always evaluate to true. This patch also removes unnecessary includes of this file from the generic NFS client. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This file is only used internally to the NFS v4 module, so it doesn't need to be in the global include path. I also renamed it from nfs_idmap.h to nfs4idmap.h to emphasize that it's an NFSv4-only include file. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
I added the nfs4 prefix to make it obvious that this file is built into the NFS v4 module, and not the generic client. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This reverts commit 5a254d0. Since commit 5a254d0 ("nfs: replace nfs_add_stats with nfs_inc_stats when add one"), nfs_readpage and nfs_do_writepage use nfs_inc_stats to increment NFSIOS_READPAGES and NFSIOS_WRITEPAGES instead of nfs_add_stats. However nfs_inc_stats does not do the same thing as nfs_add_stats with value 1 because these functions work on distinct stats: nfs_inc_stats increments stats from "enum nfs_stat_eventcounters" (in server->io_stats->events) and nfs_add_stats those from "enum nfs_stat_bytecounters" (in server->io_stats->bytes). Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Fixes: 5a254d0 ("nfs: replace nfs_add_stats with nfs_inc_stats...") Cc: stable@vger.kernel.org # 3.19+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If a READDIR reply comes back without any page data, avoid a NULL pointer dereference in xdr_copy_to_scratch(). BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 IP: [<ffffffff813a378d>] memcpy+0xd/0x110 ... Call Trace: ? xdr_inline_decode+0x7a/0xb0 [sunrpc] nfs3_decode_dirent+0x73/0x320 [nfsv3] nfs_readdir_page_filler+0xd5/0x4e0 [nfs] ? nfs3_rpc_wrapper.constprop.9+0x42/0xc0 [nfsv3] nfs_readdir_xdr_to_array+0x1fa/0x330 [nfs] ? mem_cgroup_commit_charge+0xac/0x160 ? nfs_readdir_xdr_to_array+0x330/0x330 [nfs] nfs_readdir_filler+0x22/0x90 [nfs] do_read_cache_page+0x7e/0x1a0 read_cache_page+0x1c/0x20 nfs_readdir+0x18e/0x660 [nfs] ? nfs3_xdr_dec_getattr3res+0x80/0x80 [nfsv3] iterate_dir+0x97/0x130 SyS_getdents+0x94/0x120 ? fillonedir+0xd0/0xd0 system_call_fastpath+0x12/0x17 Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Don't unnecessarily cast allocation return value in fs/nfs/inode.c::nfs_alloc_inode(). Signed-off-by: Firo Yang <firogm@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The brand new GCC 5.1.0 warns by default on using a boolean in the
switch condition. This results in the following warning:
fs/nfs/nfs4proc.c: In function 'nfs4_proc_get_rootfh':
fs/nfs/nfs4proc.c:3100:10: warning: switch condition has boolean value [-Wswitch-bool]
switch (auth_probe) {
^
This code was obviously using switch to make use of the fall-through
semantics (without the usual comment, though).
Rewrite that code using if statements to avoid the warning and make
the code a bit more readable on the way.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
* bugfixes: NFSv4: Return delegations synchronously in evict_inode SUNRPC: Fix a regression when reconnecting NFS: remount with security change should return EINVAL nfs: do not export discarded symbols NFSv4.1: don't export static symbol
…na/nfs-rdma NFS: NFSoRDMA Client Changes This patch series creates an operation vector for each of the different memory registration modes. This should make it easier to one day increase credit limit, rsize, and wsize. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The hardware, according to the specs, is limited to 256 byte transfers, and current driver has no protections in case users attempt to do larger transfers. The code will just stomp over status register and mayhem ensues. Let's split larger transfers into digestable chunks. Doing this allows Atmel MXT driver on Pixel 1 function properly (it hasn't since commit 9d8dc3e "Input: atmel_mxt_ts - implement T44 message handling" which tries to consume multiple touchscreen/touchpad reports in a single transaction). Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
WaIdleLiteRestore is an execlists-only workaround, and requires the driver to ensure that any context always has HEAD!=TAIL when attempting lite restore. Add two extra MI_NOOP instructions at the end of each request, but keep the requests tail pointing before the MI_NOOPs. We may not need to executed them, and this is why request->tail is sampled before adding these extra instructions. If we submit a context to the ELSP which has previously been submitted, move the tail pointer past the MI_NOOPs. This ensures HEAD!=TAIL. v2: Move overallocation to gen8_emit_request, and added note about sampling request->tail in commit message (Chris). v3: Remove redundant request->tail assignment in __i915_add_request, in lrc mode this is already set in execlists_context_queue. Do not add wa implementation details inside gem (Chris). v4: Apply the wa whenever the req has been resubmitted and update comment (Chris). Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Due this typo we don't save/restore the GFX_MAX_REQ_COUNT register across suspend/resume, so fix this. This was introduced in commit ddeea5b Author: Imre Deak <imre.deak@intel.com> Date: Mon May 5 15:19:56 2014 +0300 drm/i915: vlv: add runtime PM support I noticed this only by reading the code. To my knowledge it shouldn't cause any real problems at the moment, since the power well backing this register remains on across a runtime s/r. This may change once system-wide s0ix functionality is enabled in the kernel. v2: - resend after a missing git add -u :/ Cc: stable@vger.kernel.org Signed-off-by: Imre Deak <imre.deak@intel.com> Tested-By: PRC QA PRTS (Patch Regression Test System Contact: shuang.he@intel.com) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
acpi_scan_is_offline() may be called under the physical_node_lock lock of the given device object's parent, so prevent lockdep from complaining about that by annotating that instance with SINGLE_DEPTH_NESTING. Fixes: caa73ea (ACPI / hotplug / driver core: Handle containers in a special way) Reported-and-tested-by: Xie XiuQi <xiexiuqi@huawei.com> Reviewed-by: Toshi Kani <toshi.kani@hp.com> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the special PRP0001 device ID is present in the given device's list of ACPI/PNP IDs and the device has a valid "compatible" property in the _DSD, it should be enumerated using the default mechanism, unless some scan handlers match the IDs preceding PRP0001 in the device's list of ACPI/PNP IDs. In addition to that, no scan handlers matching the IDs following PRP0001 in that list should be attached to the device. To make that happen, define a scan handler that will match PRP0001 and trigger the default enumeration for the matching devices if the "compatible" property is present for them. Since that requires the check for platform_id and device->handler to be removed from acpi_default_enumeration(), move the fallback invocation of acpi_default_enumeration() to acpi_bus_attach() (after it's checked if there's a matching ACPI driver for the device), which is a better place to call it, and do the platform_id check in there too (device->handler is guaranteed to be unset at the point where the function is looking for a matching ACPI driver). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Darren Hart <dvhart@linux.intel.com>
* acpi-dock: MAINTAINERS: remove maintainship entry of docking station driver * acpi-ec: ACPI / EC: fix NULL pointer dereference in acpi_ec_remove_query_handler() * acpi-scan: ACPI / scan: Add a scan handler for PRP0001 ACPI / scan: Annotate physical_node_lock in acpi_scan_is_offline()
The code to fix stalls during free spache cache IO wasn't using the correct root when waiting on the IO for inode caches. This is only a problem when the inode cache is enabled with mount -o inode_cache This fixes the inode cache writeout to preserve any error values and makes sure not to override the root when inode cache writeout is done. Reported-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
The related syscalls are below which may cause samples/kdbus building
break in next-20150401 tree, the related information and error:
CALL scripts/checksyscalls.sh
<stdin>:1223:2: warning: #warning syscall kcmp not implemented [-Wcpp]
<stdin>:1226:2: warning: #warning syscall finit_module not implemented [-Wcpp]
<stdin>:1229:2: warning: #warning syscall sched_setattr not implemented [-Wcpp]
<stdin>:1232:2: warning: #warning syscall sched_getattr not implemented [-Wcpp]
<stdin>:1235:2: warning: #warning syscall renameat2 not implemented [-Wcpp]
<stdin>:1238:2: warning: #warning syscall seccomp not implemented [-Wcpp]
<stdin>:1241:2: warning: #warning syscall getrandom not implemented [-Wcpp]
<stdin>:1244:2: warning: #warning syscall memfd_create not implemented [-Wcpp]
<stdin>:1247:2: warning: #warning syscall bpf not implemented [-Wcpp]
<stdin>:1250:2: warning: #warning syscall execveat not implemented [-Wcpp]
[...]
HOSTCC samples/kdbus/kdbus-workers
samples/kdbus/kdbus-workers.c: In function ‘prime_new’:
samples/kdbus/kdbus-workers.c:930:18: error: ‘__NR_memfd_create’ undeclared (first use in this function)
p->fd = syscall(__NR_memfd_create, "prime-area", MFD_CLOEXEC);
^
samples/kdbus/kdbus-workers.c:930:18: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Steven Miao <realmz6@gmail.com>
We have two machines with alc256 codec in the pin quirk table, so moving the common pins to ALC256_STANDARD_PINS. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1447909 Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reported by the header checker (CONFIG_HEADERS_CHECK=y):
CHECK usr/include/asm/ (31 files)
./usr/include/asm/ptrace.h:77: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Ley Foon Tan <lftan@altera.com>
My patch to add install support for the powerpc selftests had a typo, leading to the three tests in the pmu directory itself not being installed. Fixes: 6faeeea ("selftests: Add install support for the powerpc tests") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The incorrect ordering of operations during cpu dlpar add results in invalid affinity for the cpu being added. The ibm,associativity property in the device tree is populated with all zeroes for the added cpu which results in invalid affinity mappings and all cpus appear to belong to node 0. This occurs because rtas configure-connector is called prior to making the rtas set-indicator calls. Phyp does not assign affinity information for a cpu until the rtas set-indicator calls are made to set the isolation and allocation state. Correct the order of operations to make the rtas set-indicator calls (done in dlpar_acquire_drc) before calling rtas configure-connector. Fixes: 1a8061c ("powerpc/pseries: Add kernel based CPU DLPAR handling") Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When asserting reset in pcibios_set_pcie_reset_state(), the PE is enforced to (hardware) frozen state in order to drop unexpected PCI transactions (except PCI config read/write) automatically by hardware during reset, which would cause recursive EEH error. However, the (software) frozen state EEH_PE_ISOLATED is missed. When users get 0xFF from PCI config or MMIO read, EEH_PE_ISOLATED is set in PE state retrival backend. Unfortunately, nobody (the reset handler or the EEH recovery functinality in host) will clear EEH_PE_ISOLATED when the PE has been passed through to guest. The patch sets and clears EEH_PE_ISOLATED properly during reset in function pcibios_set_pcie_reset_state() to fix the issue. Fixes: 28158cd ("Enhance pcibios_set_pcie_reset_state()") Reported-by: Carol L. Soto <clsoto@us.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by: Carol L. Soto <clsoto@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 1c509148b ("powerpc/eeh: Do probe on pci_dn") probes EEH
devices in early stage, which is reasonable to pSeries platform.
However, it's wrong for PowerNV platform because the PE# isn't
determined until the resources (IO and MMIO) are assigned to
PE in hotplug case. So we have to delay probing EEH devices
for PowerNV platform until the PE# is assigned.
Fixes: ff57b45 ("powerpc/eeh: Do probe on pci_dn")
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Patches 7cba160 "powernv/cpuidle: Redesign idle states management" and 77b54e9 "powernv/powerpc: Add winkle support for offline cpus" use non-volatile condition registers (cr2, cr3 and cr4) early in the system reset interrupt handler (system_reset_pSeries()) before it has been determined if state loss has occurred. If state loss has not occurred, control returns via the power7_wakeup_noloss() path which does not restore those condition registers, leaving them corrupted. Fix this by restoring the condition registers in the power7_wakeup_noloss() case. This is apparent when running a KVM guest on hardware that does not support winkle or sleep and the guest makes use of secondary threads. In practice this means Power7 machines, though some early unreleased Power8 machines may also be susceptible. The secondary CPUs are taken off line before the guest is started and they call pnv_smp_cpu_kill_self(). This checks support for sleep states (in this case there is no support) and power7_nap() is called. When the CPU is woken, power7_nap() returns and because the CPU is still off line, the main while loop executes again. The sleep states support test is executed again, but because the tested values cannot have changed, the compiler has optimized the test away and instead we rely on the result of the first test, which has been left in cr3 and/or cr4. With the result overwritten, the wrong branch is taken and power7_winkle() is called on a CPU that does not support it, leading to it stalling. Fixes: 7cba160 ("powernv/cpuidle: Redesign idle states management") Fixes: 77b54e9 ("powernv/powerpc: Add winkle support for offline cpus") [mpe: Massage change log a bit more] Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
…git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Not too much here, but we've addressed a couple of nasty issues in the
dma-mapping code as well as adding the halfword and byte variants of
load_acquire/store_release following on from the CSD locking bug that
you fixed in the core.
- fix perf devicetree warnings at probe time
- fix memory leak in __dma_free()
- ensure DMA buffers are always zeroed
- show IRQ trigger in /proc/interrupts (for parity with ARM)
- implement byte and halfword access for smp_{load_acquire,store_release}"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: perf: Fix the pmu node name in warning message
arm64: perf: don't warn about missing interrupt-affinity property for PPIs
arm64: add missing PAGE_ALIGN() to __dma_free()
arm64: dma-mapping: always clear allocated buffers
ARM64: Enable CONFIG_GENERIC_IRQ_SHOW_LEVEL
arm64: add missing data types in smp_load_acquire/smp_store_release
…rnel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "A few more btrfs fixes. These range from corners Filipe found in the new free space cache writeback to a grab bag of fixes from the list" * 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: btrfs_release_extent_buffer_page didn't free pages of dummy extent Btrfs: fill ->last_trans for delayed inode in btrfs_fill_inode. btrfs: unlock i_mutex after attempting to delete subvolume during send btrfs: check io_ctl_prepare_pages return in __btrfs_write_out_cache btrfs: fix race on ENOMEM in alloc_extent_buffer btrfs: handle ENOMEM in btrfs_alloc_tree_block Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole Btrfs: don't check for delalloc_bytes in cache_save_setup Btrfs: fix deadlock when starting writeback of bg caches Btrfs: fix race between start dirty bg cache writeout and bg deletion
Avoid using SHA-1 when calculating the user-visible filename when the encryption key is available, and avoid decrypting lots of filenames when searching for a directory entry in a directory block. Change-Id: If4655f144784978ba0305b597bfa1c8d7bb69e63 Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This obscures the length of the filenames, to decrease the amount of information leakage. By default, we pad the filenames to the next 4 byte boundaries. This costs nothing, since the directory entries are aligned to 4 byte boundaries anyway. Filenames can also be padded to 8, 16, or 32 bytes, which will consume more directory space. Change-Id: Ibb7a0fb76d2c48e2061240a709358ff40b14f322 Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we end I/O struct request with error, we need to pass
obj_request->length as @nr_bytes so that the entire obj_request worth
of bytes is completed. Otherwise block layer ends up confused and we
trip on
rbd_assert(more ^ (which == img_request->obj_request_count));
in rbd_img_obj_callback() due to more being true no matter what. We
already do it in most cases but we are missing some, in particular
those where we don't even get a chance to submit any obj_requests, due
to an early -ENOMEM for example.
A number of obj_request->xferred assignments seem to be redundant but
I haven't touched any of obj_request->xferred stuff to keep this small
and isolated.
Cc: Alex Elder <elder@linaro.org>
Cc: stable@vger.kernel.org # 3.10+
Reported-by: Shawn Edwards <lesser.evil@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If we don't do that, then the poison value is left in the ->pprev backlink. This can cause crashes if we do a disconnect, followed by a connect(). Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Wen Xu <hotdog3645@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
…/git/sage/ceph-client Pull Ceph RBD fix from Sage Weil. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: end I/O the entire obj_request on error
With my job change kernel work will be "own time"; I'm keeping lguest and modules (and the virtio standards work), but virtio kernel has to go. This makes it clear that Michael is in charge. He's good, but having me watch over his shoulder won't help. Good luck Michael! Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here the "other side" refers to the guest or host. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Receive packet length needs to be adjust by 2 on RX to accomodate
the two padding bytes in altera_tse driver. From Vlastimil Setka.
2) If rx frame is dropped due to out of memory in macb driver, we leave
the receive ring descriptors in an undefined state. From Punnaiah
Choudary Kalluri
3) Some netlink subsystems erroneously signal NLM_F_MULTI. That is
only for dumps. Fix from Nicolas Dichtel.
4) Fix mis-use of raw rt->rt_pmtu value in ipv4, one must always go via
the ipv4_mtu() helper. From Herbert Xu.
5) Fix null deref in bridge netfilter, and miscalculated lengths in
jump/goto nf_tables verdicts. From Florian Westphal.
6) Unhash ping sockets properly.
7) Software implementation of BPF divide did 64/32 rather than 64/64
bit divide. The JITs got it right. Fix from Alexei Starovoitov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits)
ipv4: Missing sk_nulls_node_init() in ping_unhash().
net: fec: Fix RGMII-ID mode
net/mlx4_en: Schedule napi when RX buffers allocation fails
netxen_nic: use spin_[un]lock_bh around tx_clean_lock
net/mlx4_core: Fix unaligned accesses
mlx4_en: Use correct loop cursor in error path.
cxgb4: Fix MC1 memory offset calculation
bnx2x: Delay during kdump load
net: Fix Kernel Panic in bonding driver debugfs file: rlb_hash_table
net: dsa: Fix scope of eeprom-length property
net: macb: Fix race condition in driver when Rx frame is dropped
hv_netvsc: Fix a bug in netvsc_start_xmit()
altera_tse: Correct rx packet length
mlx4: Fix tx ring affinity_mask creation
tipc: fix problem with parallel link synchronization mechanism
tipc: remove wrong use of NLM_F_MULTI
bridge/nl: remove wrong use of NLM_F_MULTI
bridge/mdb: remove wrong use of NLM_F_MULTI
net: sched: act_connmark: don't zap skb->nfct
trivial: net: systemport: bcmsysport.h: fix 0x0x prefix
...
This patch adds a tristate EXT4_ENCRYPTION to do the selections for EXT4_FS_ENCRYPTION because selecting from a bool causes all the selected options to be built-in, even if EXT4 itself is a module. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch removes duplicated encryption modes which were already in ext4.h. They were duplicated from commit 3edc18d and commit f542fb. Cc: Theodore Ts'o <tytso@mit.edu> Cc: Michael Halcrow <mhalcrow@google.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently it is possible to lose whole file system block worth of data
when we hit the specific interaction with unwritten and delayed extents
in status extent tree.
The problem is that when we insert delayed extent into extent status
tree the only way to get rid of it is when we write out delayed buffer.
However there is a limitation in the extent status tree implementation
so that when inserting unwritten extent should there be even a single
delayed block the whole unwritten extent would be marked as delayed.
At this point, there is no way to get rid of the delayed extents,
because there are no delayed buffers to write out. So when a we write
into said unwritten extent we will convert it to written, but it still
remains delayed.
When we try to write into that block later ext4_da_map_blocks() will set
the buffer new and delayed and map it to invalid block which causes
the rest of the block to be zeroed loosing already written data.
For now we can fix this by simply not allowing to set delayed status on
written extent in the extent status tree. Also add WARN_ON() to make
sure that we notice if this happens in the future.
This problem can be easily reproduced by running the following xfs_io.
xfs_io -f -c "pwrite -S 0xaa 4096 2048" \
-c "falloc 0 131072" \
-c "pwrite -S 0xbb 65536 2048" \
-c "fsync" /mnt/test/fff
echo 3 > /proc/sys/vm/drop_caches
xfs_io -c "pwrite -S 0xdd 67584 2048" /mnt/test/fff
This can be theoretically also reproduced by at random by running fsx,
but it's not very reliable, though on machines with bigger page size
(like ppc) this can be seen more often (especially xfstest generic/127)
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
fallocate() checks that the file is extent-based and returns EOPNOTSUPP in case is not. Other tasks can convert from and to indirect and extent so it's safe to check only after grabbing the inode mutex. Signed-off-by: Davide Italiano <dccitaliano@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
The estimate of necessary transaction credits in ext4_flex_group_add() is too pessimistic. It reserves credit for sb, resize inode, and resize inode dindirect block for each group added in a flex group although they are always the same block and thus it is enough to account them only once. Also the number of modified GDT block is overestimated since we fit EXT4_DESC_PER_BLOCK(sb) descriptors in one block. Make the estimation more precise. That reduces number of requested credits enough that we can grow 20 MB filesystem (which has 1 MB journal, 79 reserved GDT blocks, and flex group size 16 by default). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
…l/git/mpe/linux Pull powerpc fixes from Michael Ellerman: - build fix for SMP=n in book3s_xics.c - fix for Daniel's pci_controller_ops on powernv. - revert the TM syscall abort patch for now. - CPU affinity fix from Nathan. - two EEH fixes from Gavin. - fix for CR corruption from Sam. - selftest build fix. * tag 'powerpc-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Restore non-volatile CRs after nap powerpc/eeh: Delay probing EEH device during hotplug powerpc/eeh: Fix race condition in pcibios_set_pcie_reset_state() powerpc/pseries: Correct cpu affinity for dlpar added cpus selftests/powerpc: Fix the pmu install rule Revert "powerpc/tm: Abort syscalls in active transactions" powerpc/powernv: Fix early pci_controller_ops loading. powerpc/kvm: Fix SMP=n build error in book3s_xics.c
Pull slave dmaengine fixes from Vinod Koul: "Here are the fixes in dmaengine subsystem for rc2: - privatecnt fix for slave dma request API by Christopher - warn fix for PM ifdef in usb-dmac by Geert - fix hardware dependency for xgene by Jean" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: increment privatecnt when using dma_get_any_slave_channel dmaengine: xgene: Set hardware dependency dmaengine: usb-dmac: Protect PM-only functions to kill warning
…it/jejb/scsi Pull SCSI fixes from James Bottomley: "This is three logical fixes (as 5 patches). The 3ware class of drivers were causing an oops with multiqueue by tearing down the command mappings after completing the command (where the variables in the command used to tear down the mapping were no-longer valid). There's also a fix for the qnap iscsi target which was choking on us sending it commands that were too long and a fix for the reworked aha1542 allocating GFP_KERNEL under a lock" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: 3w-9xxx: fix command completion race 3w-xxxx: fix command completion race 3w-sas: fix command completion race aha1542: Allocate memory before taking a lock SCSI: add 1024 max sectors black list flag
…rockchip into drm-fixes one fix and maintainers update * 'drm-next0420' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
…rg/drm-intel into drm-fixes Just a single intel fix * tag 'drm-intel-fixes-2015-04-30' of git://anongit.freedesktop.org/drm-intel: drm/i915/chv: Implement WaDisableShadowRegForCpd
Pull drm fixes from Dave Airlie: "One intel fix, one rockchip fix, and a bunch of radeon fixes for some regressions from audio rework and vm stability" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915/chv: Implement WaDisableShadowRegForCpd drm/radeon: fix userptr return value checking (v2) drm/radeon: check new address before removing old one drm/radeon: reset BOs address after clearing it. drm/radeon: fix lockup when BOs aren't part of the VM on release drm/radeon: add SI DPM quirk for Sapphire R9 270 Dual-X 2G GDDR5 drm/radeon: adjust pll when audio is not enabled drm/radeon: only enable audio streams if the monitor supports it drm/radeon: only mark audio as connected if the monitor supports it (v3) drm/radeon/audio: don't enable packets until the end drm/radeon: drop dce6_dp_enable drm/radeon: fix ordering of AVI packet setup drm/radeon: Use drm_calloc_ab for CS relocs drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
…rnel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Some miscellaneous bug fixes and some final on-disk and ABI changes for ext4 encryption which provide better security and performance" * tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix growing of tiny filesystems ext4: move check under lock scope to close a race. ext4: fix data corruption caused by unwritten and delayed extents ext4 crypto: remove duplicated encryption mode definitions ext4 crypto: do not select from EXT4_FS_ENCRYPTION ext4 crypto: add padding to filenames before encrypting ext4 crypto: simplify and speed up filename encryption
nanszy
added a commit
that referenced
this pull request
May 5, 2015
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.