CPS: tag a few known bad output.voltages with URL for issue

networkupstools/nut#439 is the likely culprit when
`output.voltage` is very close to `input.transfer.high`.

Author: clepple

Cyber_Power_Systems/Cyber_Power_Systems__CP1000PFCLCD__usbhid-ups__2.6.0__01.dev

@@ -6,7 +6,7 @@ battery.mfr.date: CPS
 battery.runtime: 2220
 battery.runtime.low: 300
 battery.type: PbAcid
-battery.voltage: 16.0
+battery.voltage: 16.0	#BAD: might not have battery voltage sensor.
 battery.voltage.nominal: 24
 device.mfr: CP1000PFCLCD
 device.model: CRDA103-461
@@ -23,7 +23,7 @@ input.transfer.high: 139
 input.transfer.low: 88
 input.voltage: 121.0
 input.voltage.nominal: 120
-output.voltage: 137.0
+output.voltage: 137.0	#BAD: Might be https://github.com/networkupstools/nut/issues/439
 ups.beeper.status: enabled
 ups.delay.shutdown: 20
 ups.delay.start: 30

Cyber_Power_Systems/Cyber_Power_Systems__CP1000PFCLCD__usbhid-ups__2.6.3__01.dev

@@ -6,7 +6,7 @@ battery.mfr.date: CPS
 battery.runtime: 2790
 battery.runtime.low: 300
 battery.type: PbAcid
-battery.voltage: 16.0
+battery.voltage: 16.0	#BAD: Might not have battery voltage sensor.
 battery.voltage.nominal: 24
 device.mfr: CP1000PFCLCD
 device.model: CRDA103*AF1
@@ -23,7 +23,7 @@ input.transfer.high: 139
 input.transfer.low: 88
 input.voltage: 119.0
 input.voltage.nominal: 120
-output.voltage: 136.0
+output.voltage: 136.0	#BAD: Might be https://github.com/networkupstools/nut/issues/439
 ups.beeper.status: enabled
 ups.delay.shutdown: 20
 ups.delay.start: 30

Cyber_Power_Systems/Cyber_Power_Systems__CP1500AVRLCDa__usbhid-ups__2.7.4__01.dev

@@ -26,7 +26,7 @@ driver.version.data: CyberPower HID 0.4
 driver.version.internal: 0.41
 input.voltage: 121.0
 input.voltage.nominal: 120
-output.voltage: 137.0	#BAD
+output.voltage: 137.0	#BAD: Might be https://github.com/networkupstools/nut/issues/439
 ups.beeper.status: enabled
 ups.delay.shutdown: 20
 ups.delay.start: 30

Cyber_Power_Systems/Cyber_Power_Systems__CP1500PFCLCD__usbhid-ups__2.7.1__01.dev

@@ -29,7 +29,7 @@ input.transfer.high: 139
 input.transfer.low: 88
 input.voltage: 120.0
 input.voltage.nominal: 120
-output.voltage: 136.0	#BAD: Always at +136.0+.
+output.voltage: 136.0	#BAD: Always at +136.0+. Might be https://github.com/networkupstools/nut/issues/439
 ups.beeper.status: enabled
 ups.delay.shutdown: 20
 ups.delay.start: 30