[v10.x backport] TLS1.3 (and dependent PRs)

deps/openssl/config/Makefile

@@ -9,12 +9,14 @@ endif
 PERL    = perl
 
 # Supported architecture list
-ARCHS = aix-gcc aix64-gcc BSD-x86_64 \
+ASM_ARCHS = aix-gcc aix64-gcc BSD-x86_64 \
 darwin64-x86_64-cc darwin-i386-cc linux-aarch64 \
 linux-armv4 linux-elf linux-x32 linux-x86_64 linux-ppc \
 linux-ppc64 linux-ppc64le linux32-s390x linux64-s390x \
 solaris-x86-gcc solaris64-x86_64-gcc VC-WIN64A VC-WIN32
 
+NO_ASM_ARCHS = VC-WIN64-ARM
+
 CC = gcc
 FAKE_GCC = ../config/fake_gcc.pl
 
@@ -27,7 +29,6 @@ COPTS =  no-comp no-shared no-afalgeng
 # disable platform check in Configure
 NO_WARN_ENV = CONFIGURE_CHECKER_WARN=1
 
-GITIGNORE = $(OPSSL_SRC)/.gitignore
 GENERATE = ./generate_gypi.pl
 
 OPSSL_SRC = ../openssl
@@ -41,19 +42,23 @@ INT_CFG_DIR = $(OPSSL_SRC)/crypto/include/internal
 PHONY = all clean replace
 .PHONY: $(PHONY)
 
-all: $(ARCHS) replace
+all: $(ASM_ARCHS) $(NO_ASM_ARCHS) replace
 
 # Configure and generate openssl asm files for each archs
-$(ARCHS):
-# Remove openssl .gitignore to follow nodejs .gitignore
-	if [ -e $(GITIGNORE) ]; then rm $(GITIGNORE); fi
+$(ASM_ARCHS):
 	cd $(OPSSL_SRC); $(NO_WARN_ENV) CC=$(CC) $(PERL) $(CONFIGURE) $(COPTS) $@;
 	$(PERL) -w -I$(OPSSL_SRC) $(GENERATE) asm $@
 # Confgure asm_avx2 and generate upto avx2 support
 	cd $(OPSSL_SRC); $(NO_WARN_ENV) CC=$(FAKE_GCC) $(PERL) $(CONFIGURE) \
 	$(COPTS) $@;
 	$(PERL) -w -I$(OPSSL_SRC) $(GENERATE) asm_avx2 $@
-# Confgure no-asm and generate no-asm sources
+# Configure no-asm and generate no-asm sources
+	cd $(OPSSL_SRC); $(NO_WARN_ENV) $(PERL) $(CONFIGURE) $(COPTS) \
+	no-asm $@;
+	$(PERL) -w -I$(OPSSL_SRC) $(GENERATE) no-asm $@
+
+$(NO_ASM_ARCHS):
+# Configure no-asm and generate no-asm sources
 	cd $(OPSSL_SRC); $(NO_WARN_ENV) $(PERL) $(CONFIGURE) $(COPTS) \
 	no-asm $@;
 	$(PERL) -w -I$(OPSSL_SRC) $(GENERATE) no-asm $@

deps/openssl/config/Makefile_VC-WIN64-ARM

@@ -0,0 +1,147 @@
+
+##
+## Makefile for OpenSSL
+##
+## WARNING: do not edit!
+## Generated by Configure from Configurations/common0.tmpl, Configurations/windows-makefile.tmpl, Configurations/common.tmpl
+
+
+PLATFORM=VC-WIN64-ARM
+SRCDIR=.
+BLDDIR=.
+
+VERSION=1.1.1a
+MAJOR=1
+MINOR=1.1
+
+SHLIB_VERSION_NUMBER=1.1
+
+GENERATED_MANDATORY=crypto/include/internal/bn_conf.h crypto/include/internal/dso_conf.h include/openssl/opensslconf.h
+
+INSTALL_LIBS="libcrypto.lib" "libssl.lib"
+INSTALL_SHLIBS="libcrypto-1_1-arm64.dll" "libssl-1_1-arm64.dll"
+INSTALL_SHLIBPDBS="libcrypto-1_1-arm64.pdb" "libssl-1_1-arm64.pdb"
+INSTALL_ENGINES="engines/capi.dll" "engines/padlock.dll"
+INSTALL_ENGINEPDBS="engines/capi.pdb" "engines/padlock.pdb"
+INSTALL_PROGRAMS="apps/openssl.exe"
+INSTALL_PROGRAMPDBS="apps/openssl.pdb"
+
+BIN_SCRIPTS="$(BLDDIR)\tools\c_rehash.pl"
+MISC_SCRIPTS="$(BLDDIR)\apps\CA.pl" "$(BLDDIR)\apps\tsget.pl"
+
+
+APPS_OPENSSL="apps/openssl"
+
+# Do not edit these manually. Use Configure with --prefix or --openssldir
+# to change this!  Short explanation in the top comment in Configure
+INSTALLTOP_dev=
+INSTALLTOP_dir=\OpenSSL
+OPENSSLDIR_dev=
+OPENSSLDIR_dir=\SSL
+LIBDIR=lib
+ENGINESDIR_dev=
+ENGINESDIR_dir=\OpenSSL/lib/engines-1_1
+INSTALLTOP=$(INSTALLTOP_dev)$(INSTALLTOP_dir)
+OPENSSLDIR=$(OPENSSLDIR_dev)$(OPENSSLDIR_dir)
+ENGINESDIR=$(ENGINESDIR_dev)$(ENGINESDIR_dir)
+
+# $(libdir) is chosen to be compatible with the GNU coding standards
+libdir=$(INSTALLTOP)\$(LIBDIR)
+
+##### User defined commands and flags ################################
+
+CC=cl
+CPP=$(CC) /EP /C
+CPPFLAGS=
+CFLAGS=/W3 /wd4090 /nologo /O2
+LD=link
+LDFLAGS=/nologo /debug
+EX_LIBS=
+
+PERL=/usr/bin/perl
+
+AR=lib
+ARFLAGS= /nologo
+
+MT=mt
+MTFLAGS= -nologo
+
+AS=
+ASFLAGS=
+
+RC=rc
+
+ECHO="$(PERL)" "$(SRCDIR)\util\echo.pl"
+
+##### Special command flags ##########################################
+
+COUTFLAG=/Fo$(OSSL_EMPTY)
+LDOUTFLAG=/out:$(OSSL_EMPTY)
+AROUTFLAG=/out:$(OSSL_EMPTY)
+MTINFLAG=-manifest $(OSSL_EMPTY)
+MTOUTFLAG=-outputresource:$(OSSL_EMPTY)
+ASOUTFLAG=$(OSSL_EMPTY)
+RCOUTFLAG=/fo$(OSSL_EMPTY)
+
+##### Project flags ##################################################
+
+# Variables starting with CNF_ are common variables for all product types
+
+CNF_ASFLAGS=
+CNF_CPPFLAGS=-D"OPENSSL_SYS_WIN32" -D"WIN32_LEAN_AND_MEAN" -D"UNICODE" -D"_UNICODE" -D"_CRT_SECURE_NO_DEPRECATE" -D"_WINSOCK_DEPRECATED_NO_WARNINGS" -D"_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE" -D"OPENSSL_SYS_WIN_CORE" -D"NDEBUG"
+CNF_CFLAGS=/Gs0 /GF /Gy /MD
+CNF_CXXFLAGS=
+CNF_LDFLAGS=/NODEFAULTLIB:kernel32.lib
+CNF_EX_LIBS=onecore.lib
+
+# Variables starting with LIB_ are used to build library object files
+# and shared libraries.
+# Variables starting with DSO_ are used to build DSOs and their object files.
+# Variables starting with BIN_ are used to build programs and their object
+# files.
+
+LIB_ASFLAGS=$(CNF_ASFLAGS) $(ASFLAGS)
+LIB_CPPFLAGS=-D"L_ENDIAN" -D"OPENSSL_PIC" -D"OPENSSLDIR=\"\\SSL\"" -D"ENGINESDIR=\"\\OpenSSL/lib/engines-1_1\"" $(CNF_CPPFLAGS) $(CPPFLAGS)
+LIB_CFLAGS=/Zi /Fdossl_static.pdb $(CNF_CFLAGS) $(CFLAGS)
+LIB_LDFLAGS=/dll $(CNF_LDFLAGS) $(LDFLAGS)
+LIB_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS)
+DSO_ASFLAGS=$(CNF_ASFLAGS) $(ASFLAGS)
+DSO_CPPFLAGS=$(CNF_CPPFLAGS) $(CPPFLAGS)
+DSO_CFLAGS=/Zi /Fddso.pdb $(CNF_CFLAGS) $(CFLAGS)
+DSO_LDFLAGS=/dll $(CNF_LDFLAGS) $(LDFLAGS)
+DSO_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS)
+BIN_ASFLAGS=$(CNF_ASFLAGS) $(ASFLAGS)
+BIN_CPPFLAGS=$(CNF_CPPFLAGS) $(CPPFLAGS)
+BIN_CFLAGS=/Zi /Fdapp.pdb $(CNF_CFLAGS) $(CFLAGS)
+BIN_LDFLAGS=/subsystem:console /opt:ref $(CNF_LDFLAGS) $(LDFLAGS)
+BIN_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS)
+
+# CPPFLAGS_Q is used for one thing only: to build up buildinf.h
+CPPFLAGS_Q=-D"L_ENDIAN" -D"OPENSSL_PIC"
+
+PERLASM_SCHEME=
+
+PROCESSOR=
+
+build_generated: $(GENERATED_MANDATORY)
+
+crypto/buildinf.h:
+	"$(PERL)" "util/mkbuildinf.pl" "$(CC) $(LIB_CFLAGS) $(CPPFLAGS_Q)" "$(PLATFORM)" > $@
+
+apps/progs.h:
+	"$(PERL)" "apps/progs.pl" $(APPS_OPENSSL) > $@
+
+crypto/include/internal/bn_conf.h:
+	"$(PERL)" "-I$(BLDDIR)" -Mconfigdata "util/dofile.pl" \
+	    "-omakefile" "crypto/include/internal/bn_conf.h.in" > $@
+crypto/include/internal/dso_conf.h:
+	"$(PERL)" "-I$(BLDDIR)" -Mconfigdata "util/dofile.pl" \
+	    "-omakefile" "crypto/include/internal/dso_conf.h.in" > $@
+include/openssl/opensslconf.h:
+	"$(PERL)" "-I$(BLDDIR)" -Mconfigdata "util/dofile.pl" \
+	    "-omakefile" "include/openssl/opensslconf.h.in" > $@
+
+distclean:
+	$(RM) $(GENERATED)
+	$(RM) /Q /F configdata.pm
+	$(RM) /Q /F makefile

deps/openssl/config/README.md

@@ -1,4 +1,4 @@
-## Upgrading OpenSSL-1.1.0
+## Upgrading OpenSSL
 
 ### Requirements
 - Linux environment (Only CentOS7.1 and Ubuntu16 are tested)
@@ -22,12 +22,12 @@ Copyright (C) 2015 Free Software Foundation, Inc.
 $ nasm -v
 NASM version 2.11.08
 ```
+
 ### 1. Obtain and extract new OpenSSL sources
 
 Get a new source from  https://www.openssl.org/source/ and extract
 all files into `deps/openssl/openssl`. Then add all files and commit
 them.
-
 ```sh
 $ cd deps/openssl/
 $ rm -rf openssl
@@ -36,36 +36,58 @@ $ mv openssl-1.1.0h openssl
 $ git add --all openssl
 $ git commit openssl
 ````
-The commit message can be
 
+The commit message can be (with the openssl version set to the relevant value):
 ```
 deps: upgrade openssl sources to 1.1.0h
 
-This updates all sources in deps/openssl/openssl with openssl-1.1.0h.
+This updates all sources in deps/openssl/openssl by:
+    $ cd deps/openssl/
+    $ rm -rf openssl
+    $ tar zxf ~/tmp/openssl-1.1.0h.tar.gz
+    $ mv openssl-1.1.0h openssl
+    $ git add --all openssl
+    $ git commit openssl
 ```
+
 ### 2. Apply a floating patch
 
-Currently, one floating patch is needed to build S390 asm files.
+Currently, one floating patch is needed to build S390 asm files:
 ```
- commit 094465362758ebf967b33c84d5c96230b46a34b3
- Author: Shigeki Ohtsu <ohtsu@ohtsu.org>
- Date:   Wed Mar 7 23:52:52 2018 +0900
+Author: Shigeki Ohtsu <ohtsu@ohtsu.org>
+Date:   Wed Mar 7 23:52:52 2018 +0900
+
+    deps: add s390 asm rules for OpenSSL-1.1.0
 
-     deps: add s390 asm rules for OpenSSL-1.1.0
+    This is a floating patch against OpenSSL-1.1.0 to generate asm files
+    with Makefile rules and it is to be submitted to the upstream.
 
-     This is a floating patch against OpenSSL-1.1.0 to generate asm files
-         with Makefile rules and it is to be submitted to the upstream.
+    Fixes: https://github.com/nodejs/node/issues/4270
+    PR-URL: https://github.com/nodejs/node/pull/19794
+    Reviewed-By: James M Snell <jasnell@gmail.com>
+    Reviewed-By: Rod Vagg <rod@vagg.org>
+    Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
+
+ deps/openssl/openssl/crypto/poly1305/build.info | 2 ++
 ```
 
-Cherry pick it from the previous commit.
+Find the SHA of the previous commit of this patch:
+```sh
+$ git log -n1 --oneline -- deps/openssl/openssl/crypto/poly1305/build.info
+```
+
+Using the SHA found in the previous step, cherry pick it from the previous
+commit (with the openssl version in the commit message set to the relevant
+value):
 ```sh
 $ git cherry-pick 45b9f5df6ff1548f01ed646ebee75e3f0873cefd
 ```
-### 3. Execute `make` in `deps/openssl/config` directory
 
-Just type `make` then it generates all platform dependent files into
-`deps/openssl/config/archs` directory.
 
+### 3. Execute `make` in `deps/openssl/config` directory
+
+Use `make` to regenerate all platform dependent files in
+`deps/openssl/config/archs/`:
 ```sh
 $ cd deps/openssl/config; make
 ```
@@ -96,19 +118,22 @@ $ git add deps/openssl/config/archs
 $ git add deps/openssl/openssl/crypto/include/internal/bn_conf.h
 $ git add deps/openssl/openssl/crypto/include/internal/dso_conf.h
 $ git add deps/openssl/openssl/include/openssl/opensslconf.h
-$ git add deps/openssl/openssl/.gitignore
 $ git commit
 ```
 
-The commit message can be
+The commit message can be (with the openssl version set to the relevant value):
 ```
- commit 8cb1de45c60f2d520551166610115531db673518
- Author: Shigeki Ohtsu <ohtsu@ohtsu.org>
- Date:   Thu Mar 29 16:46:11 2018 +0900
-
-     deps: update archs files for OpenSSL-1.1.0
-
-     `cd deps/openssl/config; make` updates all archs dependant files.
+ deps: update archs files for OpenSSL-1.1.0
+
+ After an OpenSSL source update, all the config files need to be regenerated and
+ comitted by:
+    $ cd deps/openssl/config
+    $ make
+    $ git add deps/openssl/config/archs
+    $ git add deps/openssl/openssl/crypto/include/internal/bn_conf.h
+    $ git add deps/openssl/openssl/crypto/include/internal/dso_conf.h
+    $ git add deps/openssl/openssl/include/openssl/opensslconf.h
+    $ git commit
 ```
 
 Finally, build Node and run tests.